IP automatic for WAN port doesn´t works

Hi, I have a RV042 with latest firmware (4.0.4.02) and I´m trying to conect to Internet in port WAN1 with the optino "Obtain an IP automatically". I have noticed that the router receives an IP from the modem, I´m able to connect to the from a PC in the same WAN subnet to the WEB Management page, but in the system summary the Wan Status is IP address 0.0.0.0 default gateway 0.0.0.0 DNS 0.0.0.0 and the pc in the internal LAN couldn't surf Internet.
The only way is assigning an static IP an DNS servers, and then all works fine.
On the system log shows the message "infinite IP address lease time. Exiting" when activate the IP automatically for the WAN1 connection type.
There is no option to change the leased time.
I need to send a router to a remote office where the connection to INternet is with a dynamic IP. Help please

I tried connecting a LAN port to the WAN port and it worked. I then connected the WAN port to the LAN port of a DLink router in series and I could communicate with the internet. I then connected it directly to the Motorola CPEi 150 and the port showed nothing. I then tried to repeat my steps and could not get any responce on the WAN port even with rebooting the router and reverting to factory defaults. The WAN port appears to have intermitten problems. I will attempt to troubleshoot some more but I may have to give up.

Similar Messages

WRT400N WAN port doesn't work.

Nothing that I connect to the WAN port seems to get the internet LED to illuminate. I have a DHCP access to a Motorola CPEi 150 which works great if I connect to it directly with a netbook or if I use a dlink WRB-2310 router but it doesn't ever seem to register with the WRT400N WAN port. I've even tried connecting the WAN port to the dlink and still no LED or address from the DHCP server. It's a recently bought this Linksys-refurbished router and I think it will cost more to send it back that it cost to get. Is there an easy way to determine if the WAN port works at all without constantly disconnecting the internet in my house as family members are getting a bit upset with me.

I tried connecting a LAN port to the WAN port and it worked. I then connected the WAN port to the LAN port of a DLink router in series and I could communicate with the internet. I then connected it directly to the Motorola CPEi 150 and the port showed nothing. I then tried to repeat my steps and could not get any responce on the WAN port even with rebooting the router and reverting to factory defaults. The WAN port appears to have intermitten problems. I will attempt to troubleshoot some more but I may have to give up.

Time Capsule Internet WAN port is not working, what can I do to set it up?

When I plug the ethernet cable from my router to my Time Capsule it should turn on a green light in the back of the TC, but this light is not turning it on anymore, and this port is not working, how can I set it up?
I want to create a wireless network with the TC, but if this port (Ethernet WAN port) doesn't work, I can't, or can I? How?
Then I want to use my 2 Airport Express to use the network that I want to create.
I hope you can help me, thanks a lot.

what model is the TC? A1xxx from the base please.
How old and is the front LED otherwise showing it is operating OK?
What is the network setup..? Is the TC bridged or router.. or is it in Join wireless network mode now..
If the later.. the ethernet ports are turned off.. you need to do a factory reset of the TC.
Factory reset.. Hold in reset button.. THEN power on the TC.. keep holding in reset for about 10sec until the front LED flashes rapidly.. there is a good chance the ethernet will work now.

Automatic Proxy Configuration URL doesn't work on some computers, but Manual proxy can work

It seems that the Automatic Proxy Configuration URL doesn't work, I use the command netstat -a, can't see the connection to proxy server, but manual proxy is ok, and I tested on some others computers, most of these computers can work normally with Automatic Proxy Configuration URL.
For the computer can't work normally with Automatic Proxy Configuration URL, I did below actions
1.Clear the cache
2.update the version of firefox
3.reinstall the firefox
4.use the safemode to run firefox
but unfortunately, still doesn't work.
Can some dear friends give me a big favor for this? Thanks a million in advance!

I have the same problem, just showed up recently - very fricking annoying!!

Audio out port doesn't work well

Hi, I have a Macbook Pro 13-inch, Early 2011. Since I bought it I always use my Mac whit headphones, but since a month it only works well the left headphone. I think that the problem it was my headphones but no, because I used it on my phone and workes well. So i come to the conclusion that the audio out port doesn't work well. What you think? And what you recommend to me to fix this problem?

Probably still under warranty, but not for long. Take it to the Apple Store or AASP to have it checked ASAP.

Automatic User Device Affinity doesn't work

Hi, the automatic User Device Affinity doesn't work in my environment and I don't know why! The audit policies are enabled by GPO and User Device Affinity is correctly configured in SCCM. Below are some screenshots including de log of User Device Affinity.
Anybody could help-me please?

An old post but,
This can happened when activating
advanced audit policy in one of the GPO. once it was activated, it gets override the regular audit policy with different event id's that SCCM don't recognize. in addition, the machine tattooed with those settings so removing the GPO wont revert the settings.
Check out this thread for more information and help:
http://social.technet.microsoft.com/Forums/en-US/f3a4b675-e955-4cd2-bba6-d51ea06dd362/user-affinity-not-working-properly?forum=configmanagergeneral
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

http://support.apple.com/kb/TS2005
http://support.apple.com/kb/HT1861
https://ssl.apple.com/support/proapps/serialnumbers/

I updated to 10.4.7 and now my left USB port doesn't work

Hi all,
I ran Software Update just a second ago, installing an update to MacOS (PowerPC), ITunes, and QuickTime. After the install and the restart, my left USB port is no longer working. It was working immediately before the install.
I have verified that the peripheral that was not working in the left port works just fine in the right one. I have also confirmed that a peripheral that was working previously in the right USB port doesn't work when attached to the left one.
Therefor, I am led to believe that the problem lies in the left USB port. The only thing that has changed is the updater which ran moments ago, and again, the left USB port was working just fine prior to the install.
Has anybody else experienced this problem and knows of a fix/patch/anything I can do?
PowerBook G4 Titanium Mac OS X (10.4.7)

Welcome to the Apple discussions.
I would reset your power management unit, then install the combo 10.4.7 update. Recently, there have been issues with updates through the software update function.
Reset the PMU: http://docs.info.apple.com/article.html?artnum=14449
Download combo 10.4.7: http://www.apple.com/support/downloads/macosxupdate1047comboppc.html

Question '''OS Win2000''' using '''FireFox 5.01 - portable''' Problem: '''Plug-in for Windows-Mediaplayer doesn't work

'''OS Win2000'''
using '''FireFox 5.01 - portable'''
Problem:
'''Plug-in for Windows-Mediaplayer doesn't work '''
cause: presumably - Win2000 only copes with WMP 9.0
Your FF 5.01-portable works only for WMP 12 (??)
I have no problems with WMP when I use my regular FF 3.6 on this old Win2000. - WMP - Plug-in of FF3.6 works perfectly on my Win2000
'''question:'''
What can I do to get WMP running on my Win2000 using FF5.01-portable ?''''''

See the Portable Firefox support forum for help with that. <br />
http://portableapps.com/forums/support/firefox_portable

EA6500 manually select speed and duplex for WAN port

Is there any way (hidden settings?) to manually select speed or duplex for WAN port on EA6500? I'm using EA6500 with Genexis HRG1044 (FTTH) and the latter has known issues with upload speed when local device is connected on gigabit. It seems that both EA6500 and Genexis HRG1044 only support autonegotiation and that always results in gigabit which results in poor upload speeds over the internet. Placing 100 Mbps switch between EA6500 and Genexis HRG1044 does the trick but I was wondering if it can be done without it. BTW, my internet speed is only 100/100 Mbps anyways.
Solved!
Go to Solution.

@discoHR If you don't mind me asking, for what purpose do you want to adjust the speed on the WAN port of the EA6500? Is it to increase the upload speed? I'm just spitballing, but I don't think there's any "hidden setting" to adjust it on the EA6500.

My iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work.

my iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work. when i get it in DFU mode and try restoring with itunes it remains the same... provider already "fixed" this problem twice with a "software update" only to get the same problem again... it just "reboots" this time it happened @ night while charging... previous time in my jacket pocket... this is the 3th time it happens, and my provider (Mobistar belgium) doesn't wish to exchange or refund my iphone witch clearly has something wrong 3 times same problem in 3 months...

imanfromsweden wrote:
Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
Please help....
On belhalf of my fellow volunteers, the answer is, "We'll try our best."
My advice is to try not to treat this like it is a paid service provided by compensated professionals. Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

My charger for ipad air doesn't work.Can I use charger 10w without any worreies?

My charger for ipad air doesn't work.Can I use charger 10w without any worreies(damage battery)?Is it possible to change in apple store with warranty?

"Can I use charger 10w without any worreies(damage battery)?"
Yes you can.
"Is it possible to change in apple store with warranty?"
If you mean "can I get my power adapter replaced under warranty, at the Apple store?", yes.

MacBook Pro closest to the screen USB port doesn't work

Hey there!
I have a mid-2010 MacBook Pro 6,2 (15" 2,66 GHz i7 4GB RAM) which is in perfect conditions. I use it everyday to study and play the X-Plane simulator, basically, so it has never fallen nor taken any damage. Last week, all of the sudden, the USB port located closest to the screen stopped working. I've spent several hours trying to figure out what the problem is (tried the SMC and NVRAM reset more than once) but all I got was this log from USB Prober:
Feb 12 21:46:26.196 [2]
BRCM2070 Hub[0xffffff800bcc0c00]::DeviceRequest _DeviceRequestWithTimeout runAction() failed (0xe00002ed)
Feb 12 21:46:26.197 [3]
IOUSBDeviceUserClientV2[0xffffff80151f7200]::DeviceRequestIn (sync < 4k) err:0xe00002ed (device is not responding)
Feb 12 21:46:26.197 [3]
IOUSBDeviceUserClientV2[0xffffff80151f7200]::DeviceRequestIn < 4K to 0xffffff800bcc0c00 - returning err e00002ed, size: 0
I imagine that the problem is in the BRCM2070 Hub, as it's status in the "Port Status" section is "STATUS(change): CONNECT ENABLE SUSPEND POWER Full Speed" and "Port Power State: Suspended (Driver)", while my other USB port which is working okay is "STATUS(change): POWER Full Speed" and "Port Power State: No connection". If I connect anything to the problematic USB Port the status won't change, while, if connected to the okay one, it will show what's connected instead of saying "No Connection" (e.g. iPhone). The only thing that gives a sign of life when connected to the problematic one is my Samsung External 500GB HD, but it simply lights up, doesn't mount nor is recognised. After a minute it turns off while still connected. I don't know how to proceed as I don't have any Apple Stores near me.
Is there anyway to work this problem out or I should just wait until the end of this year to go to the US and take my machine to a Genius? This problem is really annoying me, as I frequently use one of the ports to charge my iPhone and the other one to connect my mouse. I'm thinking about buying an USB hub to bypass the problem, but it would kill my MBP's portability.

I solved my issue and I believe it was router related. I have a router through Verizon and their Fios service. My router was old so I caled for a replacement. when I received thereplacement I switched it the router to only accept 802.11n and this did the trick. Problem solved, stupid router.

My HDMI port doesn't work

Hello I upgraded my windows to 8.1-64 bit and after that I found out my HDMI port and Bluetooth doesn't work , from this page I download Intel High-Definition (HD) Graphics Driver which finish installing with a error that says---------------------------
This computer does not meet the minimum requirements for installing the software.---------------------------
also I downloaded Qualcomm Atheros Bluetooth 4.0+HS Driver for Microsoft Windows but nothing happend , in the other hand I am prety sure that my product bluetooth is Intel® PROSet/Wireless Software for Bluetooth® technology (it was previous windows driver) that I downloaded it from this link and it didn't work.I'd appreciate it if someon help me.procuct model: pavilion dv6-6c55se

Hi: I don't think you are going to have any luck running W8.1 on that machine. The Intel graphics driver won't work because you have the custom AMD/Intel switchable graphics and only the AMD driver should be used for that setup as it also contains the special Intel graphics drivers needed. You can try this W8 driver for the graphics, and if it doesn't work on W8.1, then game over. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp59850.exe The Intel bluetooth...you posted a W8 driver. I would try the W8.1 driver... https://downloadcenter.intel.com/download/23449/Intel-PROSet-Wireless-Software-for-Bluetooth-technology-for-Windows-8-1- If you are unsure as to what bluetooth driver you need, you always install the corresponding model bluetooth driver for the model wireless card your notebook has. So, if you have an Intel wireless card, then you install the Intel bluetooth driver. If you have an atheros wireless card, then you install the atheros bluetooth driver, and so forth.

Activity logging for WAN port on WRT1900ac

Hi everybody, I'm looking to monitor the activity on the WAN port. When the WAN goes on/off line, to find out when I loose connection with my internet provider. I know where to monitor the use of the ports being used, but I'm looking specific to the connects / disconnects on my WAN port towards my provider. Has anybody have suggestions?
John

What region are you located?
Has a Factory Reset been performed?
Was a Factory Reset performed before and after any firmware updates then set up from scratch?
Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
What ISP Modem service link speeds UP and Down do you have?
Check cable between Modem and Router, swap out to be sure. Link>http://en.wikipedia.org/wiki/CAT6 is recommended.
Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=88e63d78588142e6bb68e22d7faf2046_Configuring_the_M...
I recommend that you have your ISP check the cabling going to the ISP modem, check signal levels going to the ISP modem. For cable Internet, RG-6 coaxial cable is needed, not RG-59. Check for t.v. line splitters and remove them as they can introduce noise on the line and lower the signal going to the ISP modem. Connecting to the ISP modem could result in a false positive as the signal to the modem could be just enough to that point then adding on a router, could see problems. Ensure modem is working well too. Bad modems are out there as well. The router operation is dependent upon getting good data flow from the ISP modem and the modem is dependent upon getting good signal from the ISP Service.
Not sure if using the following will have information on WAN port activity:
192.168.1.1\sysinfo.cgi

IP automatic for WAN port doesn´t works

Similar Messages

Maybe you are looking for