IP Communicator Not Working With UC_540

Hello All,
I am running Cisco IP Communicator with a UC_540.  I have configured the UC_540 for the IPC Extension with the following specs.
MAC 5427.1E0A.0810 - MAC of Network Adapter on the Laptop
Phone Type - CIPC
Expansion Module - None
Preferred Codec - g711ulaw
Missed Calls - Exclude Overlay Button
First Name - BDCRemote
Last Name - H
UserID BDCRemoteH
Password - 123456
The Issue:
When I open IP Communicator, the application appears to register successfully, but the time is 5hrs ahead and the extension does not appear.   We have been using IP Commuicator off and on for about 14 months.  I have never seen this issue.  
Your thoughts and wisdome are extremely appreciated!
Thanks,
JP

Hello Gabe,
Please verify if the phone registers successfully.
In CCA Monitor -> Telephony -> Phones and extensions  - the status should be registered.
Also you may set the TFTP to 10.1.10.2 (if this is the Loopback 0 address and it is set as tftp source)in the options of the CIPC.
HTH,
Alex
*Please rate helpful posts

Similar Messages

  • My Time Capsule does not work with existing WiFi

    Following a question solved on March 24 by LaPastenague, but gone bad again.
    Apple AirPort Time Capsule
    I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
    I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
    Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured,  but then it works.
    The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
    So, I am curious if you have any idea ?
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

    I can deal with the last question first and easily.
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
    Open the airport utility .. go to the disk tab and select erase.
    When you select erase you will get mulitiple options.
    Quick removes the file table but does not delete the files,, it takes 2min or less.
    A Zero out data is the secure way,, by writing 0 ie low level drive format.
    It can take several hours..
    7 pass will take a week.. not recommended..
    35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    The fact that it did work and has now failed might point to faulty unit.
    The only way to tell is reset it properly to factory and start over.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
    Remember to keep all names short, no spaces and pure alphanumeric.
    Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

  • Lync Server 2010 conference not working with Windows 8.1 and IE 10

    Hello,
    The problem is that whenever a Windows 8.1 user tries to join a Lync server 2010 conference using Internet Explorer 10 (or 11, tried that too) the user can't join the conference. If the conference is created by a Lync server 2013 user joining works fine.
    When using Lync 2010 client we get the following error in the client: "error id 87 source id 7".
    When using Lync 2013 client we end up with a blank conversation window.
    There are no traces in server log, client log or event log.
    Below is a set of use cases that may help you to understand what is the problem scenario. Each of these works or does not work with both Lync 2010 and Lync 2013 client.
    - Lync server 2010 conference, windows 7, Chrome, Firefox, IE 10 or 11 --> Works.
    - Lync server 2010 conference, windows 8.1, IE 10 or 11 --> Does not work.
    - Lync server 2010 conference, windows 8.1, Chrome or Firefox --> Works.
    - Lync server 2013 conference, windows 8.1, Chrome, Firefox, IE 10 or 11 --> Works.
    It does not help to add the meet address to IE compatibility list (Compatibility View Settings).
    If i press F12 in IE and change the document mode of the meet page to IE 9 version then i can join meetings with Windows 8.1 and IE 10. Unfortunately i cannot make that as a default setting for the meet website.
    Any ideas on how to get Lync server 2010 meetings working with Windows 8.1 and IE 10 or 11?
    IE is the company default browser. Windows 8.1 is not a default operating system but we have increasing number of Windows 8.1 computers in our environment (mainly directors).

    According to your description, it is hard to tell whether the issue is related with IE or Lync Server 2010 or both.
    Compare the log when Lync client on Window 8.1 with IE 10 or IE 11 join Lync server 2010 conferencing and Lync Server 2013 conferencing.
    Lisa Zheng
    TechNet Community Support

  • Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

    Hi,
    The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
    If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
    Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
    Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
    But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
    The same Webcam works just fine with Lync 2013 under Windows 7.
    Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
    Thanks

    Hi,
    According to your description, it may be caused by driver.
    You can try to install the latest version of Display Driver to fix the display issue.
    Since there is no driver for Windows 8.1, I suggest you wait for updating.
    You can also post a case on Windows 8 forum, thank you for your understanding:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
    Just in case the title is too long to show, I have re-pasted here:
    The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    BDAqua wrote:
    Hello & welcome to the Forums!
    I think Spark cured this for another person and the same problem...
    http://www.shadowlab.org/Software/spark.php
    http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
    http://doublecommand.sourceforge.net/
    Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

  • Microsoft Mail not working with Windows 7 & MS-Office 2010

    Dear All
    I have a client who is using Microsoft Mail for their internal mailing. They have been using MSoffice ( Outlook) for this purpose for last so many years.
    We have found that Microsoft Mail does not work with Windows 7 and MS Office 2010 combination.
    When you try to configure it given error 0x8004110.
    When we tried with different versions, we found that if you install Office 2007 it works. If you try Office 2007 and then Office 2010 and remove Office 2007, it still work. But Then it is treated as 2 installations of Msoffice on the same computer.
    I need to know whether this is right from Licensing perspective.  We 'll be using single copy of office but it may seems as we have installed Office 2007 & office 2010 on same computer.
    --Shekhar

    We have found that Microsoft Mail does not work with Windows 7 and MS Office 2010 combination.
    When you try to configure it given error 0x8004110.
    Windows 7 is a supported operation system for Office 2010. At what exactly point will you get the specific error?
    Is that a Click-To-Run version of Office 2010? By default, for MSI-based version of Office, when you upgrade existing Office 2007 to Office 2010, the earlier version of Office will be removed:
    http://office.microsoft.com/en-us/excel-help/keep-earlier-versions-of-office-programs-when-installing-office-2010-HA102597134.aspx
    For licensing advice, as <Don> suggested above, you should contact your local Microsoft customer support or reseller.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • It does not work with sync between Outlook

    It does not work with sync between Outlook, Exchange and iPhone.
    Writing something into the iPhone so it will in the PC calendar and put up in telefoen. After a while, it disappears from the iPhone but is still on the computer. The same goes for the iPad. Seems to have arisen after the last update as a security measure was around May 25 -13.

    Suggest turning off and deleting the Exchange account and adding it back again. Appears there is a communications problem between the two.

  • External isight not working with Macbook Pro early 2008

    My external isight is not working with my Macbook Pro early 2008 (2.4 GHz, Intel Core 2 Duo, 6 GB RAM, OSX Lion). It goes warm when plugged into the firewire port but is not recognized in system prefs (lists as "unknown device" and also does not turn on (green light. I tried resetting PRAM and all the other stuff as suggested here but no luck. It used to work fine on a 1st generation Macbook and I remember that one of the first times I tried it with this machine here it turned on for a few secs (green light) but then it just simply stopped.
    Unfortunately, I have no other firewire device to check the port.
    Any ideas, dear community?

    Our (old) external Firewire iSights can be sensitive to dust, shock, vibration, humidity, and other environmental factors in storage.  (I store my spare in its original plastic shipping case with a new desiccant pack on a solid shelf - never in a desk drawer or other container that moves.) 
    You have tried several good things and may be finding that your old iSight needs work. 
    Here are the alternatives I can offer.  Consider any you have not tried in any order you like:
    (1) You can try Apple's suggestions from http://support.apple.com/kb/HT2090
    Test in more than one user account and with more than one Apple softwre application.
    (2) My expanded suggestions here: http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
    (3) Reset Firewire ports using the info from this old archived Apple article: http://web.archive.org/web/20090331211534/http://support.apple.com/kb/HT1317
    (4) If you have no local Apple Authorized service Provider who can help you, other service options are here: http://www.apple.com/support/isight/service/
    (5) Consider a new USB cam with current warranty such as one of these: http://www.mac-compatible-web-cam.com/
    Message was edited by: EZ Jim

  • Why Does Live View In DW Not Work With BC Template?

    The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??

    Hi Alex,
    Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
    Date: Thu, 14 Feb 2013 05:49:55 -0800
    From: [email protected]
    To: [email protected]
    Subject: Why Does Live View In DW Not Work With BC Template?
        Re: Why Does Live View In DW Not Work With BC Template?
        created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
    Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Intel 6205 wireless not working with Lenovo W520

    Loving the new W520... very fast, if only the wireless would work. Unable to get wireless interface functioning, won't even show up in ifconfig. I've appended requested wireless information, thanks in advance for any assistance.
    1) Machine Brand and Model (PC/Laptop):
    Lenovo W520
    Intel Centrino Advanced-N 6205
    Note: Wireless switch on lefthand side enabled, bluetooth led lights up but wireless does not.
    2) Wireless Brand, Model and Wireless Chipset:
    $ lspci -nn
    03:00.0 Network controller [0280]: Intel Corporation 6000 Series Gen2 [8086:0085] (rev 34)
    3 ) check interface:
    ifconfig does not show wireless
    $ iwconfig
    lo no wireless extensions.
    eth0 no wireless extensions.
    4 ) Check for modules:
    $ lsmod
    iwlagn 215351 0
    iwlcore 139688 1 iwlagn
    mac80211 269644 2 iwlagn,iwlcore
    cfg80211 167809 3 iwlagn,iwlcore,mac80211
    5) Kernel boot messages
    $ dmesg
    [ 13.497936] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 13.497938] iwlagn: Copyright(c) 2003-2010 Intel Corporation
    [ 13.498058] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 13.498089] iwlagn 0000:03:00.0: setting latency timer to 64
    [ 13.498181] iwlagn 0000:03:00.0: Detected 6000 Series 2x2 AGN Gen2a, REV=0xB0
    [ 13.499187] lp: driver loaded but no devices found
    [ 13.502642] alloc irq_desc for 22 on node -1
    [ 13.502645] alloc kstat_irqs on node -1
    6 ) Network configuration
    $ sudo lshw -C network
    *-network UNCLAIMED
    description: Network controller
    product: 6000 Series Gen2
    vendor: Intel Corporation
    physical id: 0
    bus info: pci@0000:03:00.0
    version: 34
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress cap_list
    configuration: latency=0
    resources: memory:d5300000-d5301fff
    7 ) Scan for networks:
    not relevant as no wireless interface appears
    8 ) Ubuntu Version:
    Ubuntu 10.10
    9 ) Kernel/architecture (including 32 vs. 64 bit):
    2.6.35-28-generic x86_64
    10 ) Restarting the network:
    sudo /etc/init.d/networking restart
    * Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
    [ OK ]
    Additionally, modinfo shows the following:
    $ modinfo iwlagn
    filename: /lib/modules/2.6.35-28-generic/updates/compat-wireless-2.6.36/iwlagn.ko
    alias: iwl4965
    license: GPL
    author: Copyright(c) 2003-2010 Intel Corporation <[email protected]>
    version: in-tree:
    description: Intel(R) Wireless WiFi Link AGN driver for Linux
    firmware: iwlwifi-4965-2.ucode
    firmware: iwlwifi-5150-2.ucode
    firmware: iwlwifi-5000-2.ucode
    firmware: iwlwifi-6000g2b-4.ucode
    firmware: iwlwifi-6000g2a-4.ucode
    firmware: iwlwifi-6050-4.ucode
    firmware: iwlwifi-6000-4.ucode
    firmware: iwlwifi-1000-3.ucode
    srcversion: 8F7F4C6196599FCA596C837

    Hi  sparhk, and welcome.
    One of the Lenovo staff who frequents the forum put out a call to help you in a private forum.  I do a little Linux, so I poked into it.  To my amazement my first Google hit was your thread where you indicate you have solved the problem.  (At least, it _looks_ like you...)
    May I respectfully suggest that a post back here indicating success would be a nice touch?  That way anyone who passes by looking for help with this issue will have a better chance of finding it.  For posterity, here it is (see post number 25):
    [SOLVED] Intel 6205 wireless not working with Lenovo W520
    Glad you got it working,
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Simple Pass Not Working with Chrome Version 42.0.2311.90 m

    SimplePass stopped working today.  I noticed a while ago that I no longer had to manually add the Website Logon extension anymore.  A small window popped up with a warning about using developer extensions and SimplePass worked.  Website Logon extension is enabled, but SimplePass isn't working.
    Does anyone know I can fix this?  Many thanks in advance.
    As a last resort, I have gone back to a previous restore point.  Now SimplePass is working.  However, I would still like resolution as I expect to encounter this problem again with other updates, etc.  Can someone tell me what Windows Update may have caused the problem so I can not apply that particular update?
    Thanks again.

    Hi @mellman ,
    Welcome to the HP Support Community! I hope you enjoy your time with us.
    I see that you are having a problem with SimplePass not working with Chrome. This has been a problem for a while now as Google Chrome made some changes about what extensions are available from their webstore and how they work.  You can try the steps in this HP Forums post to see if that fixes the issue for you.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • C3 did not work with all the types of routers

    Hi!
    My problem is with the C3 (Hungarian 03.36 Vodafone), that the e-mail program is not working with all the wlan routers. My home router is Asus WL-520GC and with it I get communication error, but with a Linksys or a Tplink router everything is good. How can it be?
    (I ve heard it from outhers too)
    (both WPA2personal and DHCP)
    I tried it with factory settings, but same problem: communication error.
    Pls help! 

    Solved: I had to upgrade the firmware of the router.
    It works

  • Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site i'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9.

    Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
    running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
    and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
    broke this application. Help!!

    Hi,
    It seems there is nothing to do with IE mode.
    Please make sure your link still can be accessed.
    The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
    For more infromation,please check link below:
    http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Post Moved Not working with Xbox

    Post moved  http://community.bt.com/t5/Other-BB-Queries/Not-working-with-xbox/td-p/479565
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    Yea, in my honest opinion the wireless on the HH3 is not the greatest at all, the channel switching for me causes problems which causes my external devices to lose connection for a few seconds at times.
    Is there no way you could just try it? even for long a game or so just to rule out any possibilites? Also, since your at the other end of your house, that is also a problem even when your powerline adaptors.
    If you want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

Maybe you are looking for