IP configuration to connect application server installed in vmware win2003

Hi Experts,
I have one ides application server installed in a VM (OS - win 2003). I am using Win 7 on physical machine. Now i want to setup such a network by which I can access my IDES server from any where through internet , which is installed in VM. If possible I also want to configure both the systems to access ides from win7 of my Physical machine (without internet). If possible kindly suggest with examples.
Kindly help me out I am new to all these networking techniques but I can understand & follow the suggestions properly........
Thanks
SATYA PADHY

Hello Satya,
I have the situation where I am accessing VM ware installed SAP system from outside.
You have to take help from your network team, they will reveal the IP to outer world and open all the required ports.
2nd situation is that you need to access it without internet, that can be possible if you will be in same LAN.
With my experience I can say that there will be no issue for your windows 203 or wind 2007, it doesnt depends on platform.
Regards,
Amit Barnawal

Similar Messages

Oracle Application Server Install Issue

Gurus,
There were 2 CD/DVDS (media) sent for the Oracle Application Server Install, but the Oracle Universal Installer did not ask for the 2nd CD while doing the Install, is this normal or I am not sure I missed any steps while installing the 1st CD/DVD.
I was waiting that it would ask for the IInd CD/DVD, But it never? but the Install looked clean and exited clean without any error.
Please advice.
Thanks
Sheik

The 2nd disk is Companion CD. It contains the install files for other components.
For instance, If you want to install Oracle HTTP Server only, then you use the companion CD to do so. It has many other individual installations.
Aalap Sharma :)

I've the Orion Application Server installed

Hi,
we have the Orion Application Server installed. And so it's not possible to install the PDK like it is wrote in the Installation Guide of the PDK.
I don't hava the path named .../OC4J_HOME/applications.
Has anyone an Idea how to install the PDK in this Environment?
Thanks in advance
Daniel

hi,
If you are using Orion, then you can substitute the OC4J_HOME with orion folder (The foldr that gets created when you extract orion.zip).
--Sriram

Is ITS application server compatible with VMware

Hi SAP Gurus,
Please let us know if ITS application server compatible with VMware
Thanks
Rajesh

Yes... i have use it in the past without problems..
regards
Juan

HTTP Receiver adpater configuration for Web Application server

Hello All,
I am trying to configure a HTTP scenario. I want to configue the receiver HTTP channel to connect to the WebApplication server installed locally.
I am able connect to the WebApplication server from by browser by giving the URL http://inld50037931a.dhcp.blrl.sap.corp:8080/hello/.
In my receiver HTTP channel i have configure as below
Target Host : inld50037931a.dhcp.blrl.sap.corp
Service Number : 8080
Path : /hello.
But it is failing in run time with error in SXMB_MONI : HTTP-Server Code 500 Reason Internal Server Error Explanation Unknown Host.
And i checked the Trace and it is looking for taget URL :
http://inld50037931a:8080/hello
instead of
http://inld50037931a.dhcp.blrl.sap.corp:8080/hello
Kindly help me in correcting the receiver channel configuraion.
Best Regards,
Biswa

Hi Babu,
The given links might help you:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
HTTP Receiver Adapter
Regards,
Ajay.

Configuring Workspace to Application Server (BEA Weblogic)

Hiello,
I am in the processing of installing and configuring System 11.1.1.1 and I have run into an issue with configuring Worksapce. I have successfully installed and configured Shared Services on (server1) using BEA Weblogic 9.2 MP3 but when I go to configure Worksapce (on the same server) the Deploy to Application Server FAILS. I have uninstalled and re-installed the software 6+ times with the same results. I would think since Shared Services works using Weblogic 9.2 MP3, Workspace would also work.
When the configruation FAILS while deploying to the Applicaton Server this is the error that is generated in the config log file:
"(Jan 16, 2009, 08:11:11 AM), com.hyperion.hit.registry.utils.RegistryLogger, ERROR, Component type name null is not valid INVOKER IS com.hyperion.hit.registry.LogicalWebAppComponentImpl.getWebAppType
(Jan 16, 2009, 08:11:11 AM), com.hyperion.hit.registry.LogicalWebAppComponentImpl, ERROR,"
Any help would be appreciated.
Thanks

Hi Jimit,
Please download : Oracle WebLogic Server 11gR1 (10.3.2) - Package Installer from the below link: http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
Once you click on *"Accept"* radio button then after *"Sign in"* you will be able to download it for Linux.
Installation is very easy ...just run the installer ...it will ask for the Installation Directory...and once you provide it...it should do every thing for you.
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

Error during Application Server Install

Hi
I get the below error during Infrastructure install as well as Application Server. But if I click ok , it completes the install , not sure whether this is critical issue.
The procedure entry point GetProcessImageFileNameW could not be located in the dynamic link library PSAPI.DLL
I am installing this in Windows XP Professional,Service pack2 . I tried installing the same in my laptop with same configuration and I did not get this error. Only difference between my laptop and desktop is , in my laptop I am running IE6.0,where as in desktop I am running IE7.0. I am not sure this is relevent here..
Any assistance would be really helpful
Thanks
Balaji

I went ahead and completed the install, and it did not impose any problem..
thanks
balaji

R3 Application server Install

Dear All
we have installed new sap R3 CI-DB sever at VMware server.
My VMware windows 2000 server host name is <XXXXXXA>, also addtionally my server has Datalink hostname with Different IP.
fxWAM Hostname: <XXXXXXXXA>
     IP   : xxx.xx.xx.xx
Datalink:Hostname : <XXXXXXXXXXB>
          IP   : xxx.xx.xx.xx
Now clients wants to use the 2nd Datalink hostname <XXXXXXXXXXB> for Application server(DI) and CI-DB server
connection. Because datalink ip address is very fast.
Now I have to newly install the DI instance, please let me know in which below steps of Application server insallation
I have to give the Datalink:Hostname.
Central Instance Host     XXXXXXXXA
Database Instance Host          XXXXXXXXA
Central Transport host          XXXXXXXXA
Thanks
Malai

Dear Marcus,
Thanks for the information.
1).My existing I put host file entry in application server is like
(142.XX.XX.XX)        KccfxuFF11
Starting 142* Ip is FXWAN type. and Kccfx１ is belogns to FXWANT type.
Put the hostname and the IP of the high-speed network of the CI-DB in the hosts file of the application server
Myunderstaring is like you want to put host file entry in application serer like
2)
172.XX.XX.XX u3000u3000KccfxuFF11
172* Ip is -> DATA_active ipaddress
KCCFX1 -> FXWAN network- Server Original hostname.(whereas DATA_active Host name is FFFfxx)
Do you want to put host entry in number 2) like above ?. Please correct me if I am wrong?.
Thanks
Malai
Edited by: Thirumalai Malai on Feb 25, 2010 10:51 AM

10g application server install on windows server 2003

already installed on my pc oralce 9i database and oralce 6i
now I m installing 10g application server on windows server 2003 but geeting error, when I click on setup button
Error:
checking swap space : 1488mb Available, 1535 mb required . Failed
please guide me

got it ... increased virtual memroy size 1550...

SNC configuration in multiple application server environment

Hello Experts,
We are planning for SNC configuration between ECC 6 and NW04s Portal systems.
ECC 6.0 is running with Central Instance and two application servers.
NW04s EP is running with 4 server nodes.
I am very much clear about setting up SNC between ABAP and JAVA running with single application server and server node.
But totally confused about SNC/SSL setup in multiple server environment. Would really appreciate if you can provide some ideas/docuements on setting up SNC/SSL in multiple server environment.
1. Do we need to create multiple PSE for each of the ABAP application server? If yes then would the CN should be same or different.
2. If we create only one PSE for central instance and copy this to other application server - will this work.
Looking forward to hear from your experiences.
Regards
Davinder

Hi,
Please check the link http://help.sap.com/saphelp_nw04/helpdata/en/69/b0bbd6dde71141bee8806586144796/frameset.htm
Regards,
Gowrinadh

Sun application server install in silent mode

Hi,
Can any body let me know the procedure to install sun ONE 8 application server in silent mode on windows.
Thanks
Raj

Did you try the silent install steps in the Installation Guide?
http://docs.sun.com/source/819-0080/install_pe.html#wp20355

Oracle 11G database and Application Server installed on same server

What are the pros and cons installing Oracle 11G database and Oracle Application Server (Forms and Reports) on the same server?
Thank you in advance, Sonya

Some may want their data in a separate network zone for security reasons.
It also depends if it is the same people that do maintenance on db and appserver.
It is lower cost with one server, and only 1 Os to set up.

Client can not connect to Server installed window server 2008 and using 8.8

HI all!
I have a problem when Client log in to server that installed window server 2008.It can not connect to this server even when restart and key in IP or Server name,...
I try disable Firewall of window 2008 in server machine and client can connect to server. But when i disable firewall, it's mean i can not use Remote desktop or terminal service..
Now, how i can do in order to solve this problem.
Thanks!

Hi,
Take a look at the admin guide (Page 75, 119, 159):
[http://service.sap.com/~sapidb/011000358700000150922010E.zip]
If you installed a firewall on the license service computer, make sure that the firewall is not set to port 30000; otherwise, the license service cannot work.
If you are using Port X, make sure that you open Port X and Port (X+1) in the firewall. For example, if you are using port 10000, make sure to also open port 10001.
The default communication port is 1143.
The default port of the SAP Business One license server is 30000 for license communication and 30001 for the license naming service

SAP JAVA Application Server Install / Label wrong

Hello,
I need to install Java Application Server (at least some Components) because we need to run the Adobe Document Services and it runs only on JAVA App Server. We have till now only ABAP Stack Server.
I try to install it with SWPM: SAP EHP1 for NW7.3-->MaxDB-->SAP Systems-->App Server JAVA-->Standard System
and I get the follwing error when checking Software: Found the label J2EE-CD: 703 but you need label SAP:UT:731.
Please advise.
Regards
Mike

Hi Michael,
In the CD media 51043228 JAVA, whitch it is composed by 5 CDs.
Try in the folder Java Component NW731\DATA_UNITS\JAVA_J2EE_OSINDEP_UT where there is LABEL.ASC file with label SAP:UT:731:SP01:*:*
Hope it helps.
Best regards,
Martina

Custom JAAS login module configuration in Oracle application server

I have a LDAP login module implementing javax.security.auth.spi.LoginModule. This login module works well with tomcat and weblogic, if I configure the JVM arguments -Djava.security.auth.login.config and -Djava.security.policy to point to the login.conf and access.policy files. The login.conf file has the below content
FREEWAY_SERV
com.wipro.freeway.security.LdapLoginModule required debug=true portal=false;
FREEWAY_PORT
com.wipro.freeway.security.LdapLoginModule required debug=true portal=true;
The access.policy file has contains content like below:
grant Principal com.wipro.freeway.security.RolePrincipal "UserAdministration" {
permission com.wipro.freeway.security.URLPermission "/createOtherUser.frw";
permission com.wipro.freeway.security.URLPermission "/createDealer.frw";
The application uses these login modules by passing Name of the JAAS configuration (FREEWAY_SERV or FREEWAY_PORT).
I would like to use the same login module and code in Oracle application sever 10.1.3 and I haven't got any success yet. I am not getting how to set these JVM properties and make my application identify this custom login module. I have tried configuring the custom login module via oc4j admin console and I couldn't give a name to my configuration. I also set the system properties for
-Djava.security.auth.login.config and -Djava.security.policy with no success.
Could anybody please help me to get this right?
Thanks in advance.

Hello,
In OracleAS 10g R3 (10.1.3.x) you can register your login module in your application (and server) using Enterprise Manager, and config file. That is easier and more flexible that the parameter.
I would invite you to take a look to the security how-to:
- 10.1.3 How-tos, and How to integrate a custom login module
You can also take a look to the 10.1.3 Documentation and the LDAP/Login Module integration.
- Security guide: Login Modules

IP configuration to connect application server installed in vmware win2003

Similar Messages

Maybe you are looking for