IP connection to Time Capsule

I have a new Time Capsule, a mostly ethernet network, a Lexmark T620 printer connected via ethernet that before the TimeCapsule I was able to get to by TCP/IP [to do some setup via Safari browser, when I had a Belkin router and used the IP#192.168...etc], and I could print fine in Appletalk but because I wanted to do a setup was trying to do it via the IP address of the printer which I manually set.
The printing will not go to the IP address of the printer [properly set], I can't ping the IP address [says "no route to host, host is down" but the printer is on] - the TimeCapsule 'sees' all the other computers on the network and is working fine. When I try to print to the IP address that I manually put into the printer and try to print it says it won't = "Connecting to 10.0.1.25 on port 631...network host is busy..." but its not. I can print via Appletalk but the issue is to be able to get the printer page up on the browser by going to the IP address set in the printer and thru the router IP address and subnet mask numbers which are correct.
I have called and spoken at length to Apple Support and I have done the same with Lexmark support.
So, I guess if anyone has any suggestions they would be much appreciated = not sure whether it's an Apple or Lexmark issue but since I can't even ping to the number assigned thru the Timecapsule and Printer, I thought I would ask here.

Further update: I got a new 5e cable [needed a long one anyway]. Connected that and put the IP address of the Lexmark [manually set] into the browser = won't load. Did a Ping from Network Utility and got "no route to host...host is down" [printer is online and printing just fine via Appletalk. Then just did a print to the IP address of the printer and got - "Connecting to 10.0.1.25 on port 631...unable to connect to printer". I can print fine in Appletalk.
I need to be able to access the Printer's browser setup page - I could do that with all prior routers just fine by plugging in the printer IP address [printer does do IP address printing, not just appletalk] - I have latest drivers etc. All was working fine til I put Time Capsule on the network.

Similar Messages

  • How do i connect my time capsule from outside my home? i dont have static ip

    sorry about my english...
    its been 4 months now and still I am not able to connect my time capsule via internet from outside . i have read enough forums and discussion but i am confused because every discussion has different answer. please anyone can explain me the simplest way to configure my time capsule so i can connect it from other computers. i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
    some questions.
    1. is it possible to use time capsule as nas using dynamic ip address?
    2. if yes how and where can i get exact detail about this.
    3. how to connect my time capsule form my iphone,ipad or other computers . connect through ip address or something else?
    4. is it any simple installation way to do this? i heard about bonjour and icloud but dont know how to connect through this.
    please help me
    thank you
    sachin

    i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
    Here is your primary issue.. you cannot connect with win7 ..
    Windows only offers SMB protocol which just about every ISP.. all responsible ones ...block..
    Time Capule offers AFP to internet and only AFP.
    You need to use a Mac to connect.. then use BTMM and iCloud as there is no dyndns in the TC anyway. (Actually there is a dyndns but only for apple btmm use...  you cannot access.
    If you want to or have to use windows.. then get a proper vpn router that offers vpn endpoints to windows and has dyndns.. setup the TC in bridge behind the vpn router and access via vpn .. this is the only safe way of connecting using SMB.

  • How do I connect my Time Capsule on my modem wirelessly?

    I already have a modem that I use to access the internet wirelessly on my macbook. Is there a way that I can connect my Time Capsule on this modem without having to use an enthernet cable?
    Thanks!

    So you are saying that if I use the AirPort Extreme Base Station  I would be able to connect my TC wirelessly and expend my wireless signal at home?
    No, please see my previous answer.....
    and then use it to expand the internet signal.
    That is not possible. The Time Capsule could "extend" the signal only if it is provided by another Apple router.
    What I did say was.....
    When the Time Capsule "joins" a wireless network, it simply connects to the network...like another computer. If you configure the Time Capsule this way, it becomes a wireless hard drive. it performs no routing functions and it will need to be located where it can receive a strong wireless signal from your main wireless router.
    I am not recommending that you set up the Time Capsule this way, but will provide the steps if you want.
    So, to clarify....
    The Time Capsule can be configured to "join" your existing wireless network. It will not extend or expand the wireless network. The Time Capsule becomes a wireless hard drive in this type of configuration.
    I do not recommend this type fo setup for most users because it is difficult to configure and limits backups to wireless only. You will not be able to connect to the Time Capsule using Ethernet to backup, which is much faster than wireless.

  • How do I connect my time capsule to iinet Bob ?

    How do I connect my time capsule to iinet Bob ?
    Just started with iinet naked ADSL, can locate/connect my time capsule - help please

    Bob is ok as a modem.. are you using voip?? If not bridge the bob and use PPPoE client in the TC..
    Or use Bob as a full modem router and bridge the TC.. either setup is much of a muchness.

  • I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    LOL!!
    I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
    Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
    Do a search on ebay.. 3g router.
    But you can get the TC to join a wireless network.
    It is a non-standard setup that Apple will not support.. the option is hidden.
    If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
    But please note the end result of this setup..
    very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
    In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this.

  • How do I connect my time capsule with a Lynksis wi fi netwotk?

    How do I connect my time capsule with a Lynksis wi fi netwotk?

    You cannot extend or repeat a non-apple router in an apple router..
    You must plug it in via ethernet and then setup roaming network (or if you like a completely separate network.. makes no difference from the TC point of view). TC is in bridge mode. That is router bridge not wireless bridge.. I gave the info on the other thread you are running.. very confusing when you ask in multiple threads.

  • How to connect a Time Capsule to an existing Airport Extreme?

    I have an Airport Extreme connected to my broadband internet modem. This Airport Extreme is also connected to my audio system to be used by iTunes.
    Recently I brougth my Time Capsule from another location to be included in the Airport Extreme network. I want to continue using Time Machine on the Time Capsule, and iTunes on the Airport Extreme.
    I could get this to work, by connecting the Time Capsule to my modem, and setting it up to extend an existing network (the Airport Extreme network). Airport Extreme and Time Capsule are situated next to each other. However, performance of Time Machine was horrible, far too slow. If I connect my MacBook to the Time Capsule by an ethernet cable, it does not work.
    When I set up the Time Capsule to create another wireless network, performance of Time Machine is okay. I cannot use iTunes on the Airport Extreme in that case. I have to switch networks for that.
    I'm sure it should be possible to have both an Airport Extreme and a Time Capsule in one network, use iTunes on the Extreme, and Time Machine on the Time Capsule. But I do not know how it should be arranged.
    Can anyone solve this problem?
    Greetings from Holland, Koen

    +What surprises me is that with setting 1 (TC joining AX) the Time Capsule has an option to extend the range of the network being joined.+
    Yes, but it will only "extend" if you have a newer version of the AirPort Express, the 802.11"n" version. If you have an older "b/g" version of the AirPort Express, you can set the Time Capsule to "extend", but it won't and you'll have problems.
    +With setting 2 (AX joining TC) the Airport Express does not seem to have this option.+
    This probably confirms that you have an older "b/g" version of the AirPort Express. It does not have the "extend" feature.
    +Could it be this option (which I did not switch off in my earlier experiments) which gave me such terribly bad transfer rates to my Time Capsule harddisk?+
    That's probably the reason since the older version of the AirPort Express cannot be configured to "extend".

  • I have a macbook pro and use BT homehub 3.  can't work out how to connect my time capsule. can anyone help, thanks.

    I have a macbook pro and use BT homehub 3.  can't work out how to connect my time capsule. can anyone help?  thanks

    Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
    To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
    Press and hold in reset until the front LED flashes rapidly.. about 10sec.
    Release the reset.
    Open the airport utility and setup the TC to bridge mode.
    The actual method depends on version of the OS and airport utility you use.
    This is version 5.
    Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
    Then setup wireless.. you have a number of choices here.
    Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
    Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
    Update the TC.. unplug fromt the computer and plug it into the homehub.
    If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

  • Do I need a cable connecting my Time Capsule to Airport Express if I want to use the AE to extend my wifi network range?

    I'm a bit confused by conflicting advice given by my local Apple shop and my internet provider. 
    My cable modem is plugged into a Time Capsule which I use to access the net wirelessly almost all over the house.  The one spot the wireless doesn't quite reach is (of course) where I now need my office and iMac to be.
    I thought I could just plug in an Airport Express somewhere in the middle  to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable.  That's fiddly and would involve cables running under the floor or along walls and ceilings, not something I can or really want to do.  It's not really practical to try and move the cable connection point either.
    My internet provider suggested a netgear wireless extender and said that would only need to be plugged into power.  The reviews of the netgear product I found comparing it to Airport Express suggest that the Express doesn't need to be connected to anything other than power either to extend a network range (which was what I originally thought).
    So I'm wondering which advice is correct? I've also read that the netgear product isn't all that easy to set up so I'd rather stick with.   Apple if it will do what I want.
    Thanks for any help out there

    I thought I could just plug in an Airport Express somewhere in the middle  to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable.
    I'm sure that the guy at the Apple shop means well, but he is not correct. 
    While it would be preferable to connect the Time Capsule and AirPort Express using a wired Ethernet connection, the Express can connect wirelessly and extend the wireless signal the same way....IF...it is located where it can receive a good wireless signal.

  • How to connect a time capsule with an ATT Elevate Hot Spot

    Hi,
    Need help connecting my time capsule to my ATT Elevate Hot Spot....since I have no ethernet connection.
    Thanks!

    Not sure how much we can help on this, but as a test, if you turn off the wireless on your MacBook and connect it to the router using an Ethernet cable, you should be able to log onto the Internet.
    If you can, you know the Ethernet connection is working, and it will be a simple matter to connect the Time Capsule to the router and get it set up.
    If you cannot get an Internet connection when you connect the Mac directly to the router, then more troubleshooting will be required.

  • Can I connect my Time Capsule wired to the computer and just use it as a back up

    Can I connect my Time Capsule to my computer (wired) and just use it as a back up and not as a wireless router?

    Yes, you simply bridge the TC..
    Just google for it as we have posted the instructions endlessly.
    The one trick that might be necessary is to ensure the TC is on a different IP range to the main broadband connection.
    And make sure the gateway and dns do not cause issues.. so it is generally better to set static ip on the TC and the computer.
    None of it is hard so ask for specific instructions if you get to the point.

  • Can i connect my time capsule to my hdtv for use as an extra display for my mac book pro?

    I want to use my hdtv as a display wirelessly.  Can one connect their time capsule to the tv?

    1. Can my TC handle "dual band" wifi or not? As it's 3 years old, I'm not sure the spec is sufficient.
    They have been dual band since gen2.. yours is gen4 or at worst gen3.
    2. Is the TC likely to provide better performance than the BT Home Hub router, as the Apple store suggest?
    Impossible to say.. but easy to test.. simply plug the TC into the BT router in bridge mode and use it with setup to create a wireless network.. that is the way I would suggest anyway.
    3. Will the BT wifi extender still work if the TC is the main router? BT aren't sure, hence asking here.  "Trial and error" will take hours and because of the wifi issues in my house, can be frustrating.
    Sorry this is out of my perview.. I can suggest it will be poor.. apple do not use standard settings for extend wireless.. and if it is universal repeater they also behave poorly.. Have you thought of using EOP adapters.. very popular in the UK and tend to work much better than wireless.
    4. Would the BT wifi extender communciate with the TC or the BT Home Hub router?
    As suggested above.. leave the BT as the main router and plug the TC bridged into it.. you can then use both..
    simply set the wireless names different and keep the channels apart.
    For 2.4ghz there are only 3 non-overlapping channels.. 1, 6, 11 or 13 as alternative in UK.
    For 5ghz there are lots more but the lower channels work better.. so 36-48 depending on regs in the UK.

  • How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine

    How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
    I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.

    Firstly how are you connecting to the TC.. wireless or ethernet?
    Please open a command window and ping it.. ping by name and by IP address.
    If ping succeeds at least by IP it should work.
    In windows explorer type
    \\10.0.1.1 (or whatever the TC ip is.. that is the default).
    Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
    7.6.4 firmware on the TC is useless. It works better on 7.6.1
    If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls.

  • As a Verizon FIOS client, can we just use Ethernet cable to connect to time capsule, or do we need their router to connect to the time capsule?

    As a Verizon FIOS client, can we just use Ethernet cable to connect to time capsule or do we need the Verizon router to connect to time capsule?

    The Time Capsule is indeed a wireless router with simultaneous dual band capability...and a hard drive for backup purposes. You can use that to your advantage if you configure the Time Capsule as I suggested in Bridge Mode.
    The Time Capsule will provide a 802.11n 5 GHz band and a 802.11n/g/b compatible 2.4 GHz band to allow virtually any device to connect to the network.
    I suppose that you could also use the "g" wireless network provided by the Verizon router as a "guest" network or something similar if you really do need another wireless network.
    It might be possible to configure the Time Capsule as the main router on the network....that's a question for Verizon. But even if you might be able to do this, I'm sure it is not supported by Verizon, so you would be on your own in the event of any Internet connection difficulties on your service.
    And, since the Time Capsule does not have a built in modem....you would still need to add a separate modem to the installation anyway.
    That's why my suggestion is to use the Verizon device as the "modem" and let the Time Capsule provide the dual band wireless network and of course, handle the Time Machine backups.

  • Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule?

    Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule via the USB port?  My current Time Machine has a total capacity of 1TB.  I'd like to double or triple its memory.  I don't want to use the external hard drive in lieu of the Time Capsule hard drive.  I'd like to use it in addition to.  Just don't know if/how it's possible.
    This is another one of those questions that I've searched the web for answers, and have gotten tricky answers back.  So now I'm trying to introduce a clean slate to the mix.
    Thank you for your time!

    Well, what you mentioning is possible.  However, I don't know whether it's supported (as in, "easy to set up.").  Time Machine officially supports backing up to a locally attached drive, to a machine running a Time Machine server (i.e. running OS X Server software), and to a Time Capsule.  I don't know that it officially supports a drive attached to an AirPort or to a Time Capsule.  Though I know some people have gotten it to work.
    Best I can say is to try it.  Plug the drive into the Time Capsule, ensure it's shared on the network, and then try and set it as a backup target from a machine in the Time Machine backup panel (you'll need to ensure it's mounted first).  If it works, you're all set.

  • I want to backup an external hard drive connected with time capsule

    What to do? I want a macbook air but realise that the storage is limited. I want to have en external HDD connected through time capsule or similar to access storage "wirelessly". I want everything backed up automatically through time capsule. I understand time capsule does not back up connected external HDDs unfortunately. If it did my problem would be solved. How should I do? Can a two time capsule solution be possible where one is used för storage and the other for time machine also backing up time capsule nr 1?
    I do not want to loose all my photos! They won´t fit a macbook air... I have tried "crash plan" wich is one of many ckoud solutions to try and take care of all my hundreds of GBs but it doesn´t work well. Takes forever to backup and it keeps loosing contact with the external HDD i have connected through the time capsule.
    This must be a very common need but I find no good solutions?!
    Thanks!

    You are right.. there is no decent solution from Apple..
    You need a proper NAS.. not a backup target for TM.. which is what the TC is.
    Look at Synology and QNAP.. they are not cheap but will work fine with Macs, TM even although it can be messy setting up. But the real NAS will auto backup to a USB drive.. plus the raid system offers protection against a dead drive.
    Some people use a Mac Mini as a server.. (you don't need server version OS on it).. but the disk expansion is going to cost you as much as the true NAS.

Maybe you are looking for