IP exists but do not see in Devices

Hello,
running 6.0.1 on a MARS 50. All is good but I ran into an issue where I tried to add a device, after which it never showed up in the list. I did activate after the add. I then attempted to re-add it using the same IP but slightly different name and I got the "IP exists" message.
The 2nd device shows up but I'm not receiving anything from it.
First, how do I find this existing device in MARS if it doesn't show up in the Devices list?
2nd, could this be affecting my ability to receive logs from that IP?
thanks much.

If the device is listed under Host but not under Security and Monitor Devices then yes, that will affect your ability to receive logs from that IP.
Open a quick query. Set the type to "All matching events raw messages" then set the device to the device you are trying to view the messages for. Is the device not showing up in the "filter by reporting device" for "all reporting devices"? If it is showing up, run the report for the past couple of hours.
If it's not showing up, run another quick query. This time do it for type "Unknown Event Report" for a time range of the past couple of hours and submit it inline. Look to see if there are messages in there from that particular IP address.
Go to Management > IP Management then pull down the View drop down box and select "Host". Find the device by name or by IP address then delete it.
You should be able to then re-add it as a "Security and Monitor Device".
Raymond

Similar Messages

  • Rented a movie on my mac - trying to watch on apple tv (i think 2), but iTunes not "seeing" apple tv - so i can't 'move' the rental to the device.  ??

    rented a movie on my mac - trying to watch on apple tv (i think 2), but iTunes not "seeing" apple tv - so i can't 'move' the rental to the device.  i'm brand new at apple tv - do i need to enable it or something?

    Is it the little black box? If yes then it is the 2nd model. It won't show up in iTunes as there is no syncing involved. The only time it does is when you connect and need to restore the device.
    You need to enable home sharing in iTunes and on ATV

  • Can not see the device net Master Interface in my project.

    Can not see the device net Master Interface in my existing project. Need to Modify exististing code. Can not recomiple and create exe file after making changes. Error says the vi's are broken. Tried re-installing industrial communications for device net but get an error saying a newer version is already installed. Do I need to plug my computer into the device net scanner to fix this?

    Assume the installation disk is an OS X disk? If it's the original one that came with the system (grey-colored disk versus black retail disk) have you tried to hold the alt key down when you boot? This would allow you to choose the Apple hardware test. If you can do this, choose the Apple hardware test, click the arrow to the right, and when prompted choose the extended test. Does that give you any errors or messages about a hardware problem?
    Are you able to hold the C key down when you reboot, to boot off the installation disk?

  • I had the Siri app before it was added to all iphones and when Apple added it mine quit working. I deleted mine from my phone but do not see how to get it back. any suggestions?

    I had the Siri app before it was added to all iphones and when Apple added it mine quit working. I deleted mine from my phone but do not see how to get it back. any suggestions?

    bjorth wrote:
    apparently I have just an iphone 4 not 4s, so thank you.
    It does seem rather odd that an app that was acquired thru itunes would quit working once it was incorporated into the device for all users. oh well it was probably free or $.99 when I downloaded it.
    I would think that they were just testing it to see how many people would use it.  But you might want to write a polite letter to Apple requesting a credit for the purchase price of the no longer supported app.  That seems to be the least they could for one of their 'alpha testers'.

  • Condition record exist, but has not been set

    I am creating proforma invoice for STO replenishment delivery. I am getting error log "Billing type contains split criteria, n invoiced:123456789, invoice not required". But I am able to save it. I used all standard settings for copy control and billing type.
    For the proforma invoice the condition records are picking up some times and some times not picking up. In the analysis its showing "Condition record exist, but has not been set". When I update with carry out new pricing some times its updating with condition records some times not. I need a solution urgently. Please help.
    Edited by: k c on Nov 4, 2009 7:50 AM

    Hello,
    The message "condition record exists, but has not been set" tells you
    that the condition record exists, but has not  been set in the document.
    If pricing was carried out again for the document item, then the
    condition would be set.
    This can have different causes:
    The condition was deleted manually in the item condition screen.
    The condition record was created later. Please note that order
    processing and pricing have buffer mechanisms. This means that a newly
    added condition record might only be found after order processing have
    been left completely and then started again.
    When an item was added, the condition record was accessed with key
    fields other than change time. This could lead to different results in
    the requirements check at the time of adding and the change time. This
    can occur when modifications are made.
    In billing (or when copying orders): Certain condition types were not
    determined in the source document (this is usually controlled by the
    pricing requirements). When creating the document, the document flow
    (TVCPF,TVCPA) is processed using a pricing type that does not
    redetermine these condition types, although they are supposed to be
    called via the requirments."
    Please check if any of those reasons apply to your problem.
    Note that the condition type is determined just in the moment when
       the billing item is created. And it then that the userexit fills the
       field. When you save the billing document, pricing is called.
       Please ensure that you have any userexits switched off and then test
       this issue again.
    If you have access to OSS notes. please see:
         24832      Pricing rules / TVC
        130416     Requirements in the condition preliminary st
          27636     Message: Condition exists (removed manually)
        859876     Condition is missing: Message VE 108 or VE 008
    I hope you find this information very helpful and hopefully it will solve your problem.
    Regards,
    Martina McElwain
    SD - Forum Moderator

  • I am trying to update SW on my iPad but do not see a software update option in setting/general tab, please help.

    I am trying to upgrade SW to iSO 5 on my iPad but do not see the software upgrade option under the setting/general tab.  Please help.

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Macbook does not see bluetooth devices

    I have a MacBook Pro with bluetooth enabled but it will not see bluetooth devices.  I have a new Bose speaker that connects fine to my iPhone but not at all to the Mac.  Macbook says it is "discoverable".  Any suggestions on what to check?
    Thanks,
    Tony

    This is the iPhone forum, and as your question has nothing to do with the iPhone, you should consider posting in a more appropriate forum.

  • Domaindnszones Forestdnszones exists but does not show in Dns

    Guys I have a weird situation where the Domaindnszones and Forestdnszones partitions exists but does not show in dns.
    If I try to recreated the partition in DNS it says "partition already exists".
    I try Recreating it in DNS by creating a new domain under the "mydomain" zone but it never gets populated.
    Replication seems to be working fine between my DC's
    This domain was created from way back in the NT days and has just been upgraded over the years..
    currently we have 1 2003 Dc and 2 2008 r2 Dc. we want to retire the 2003 dc. all 3 dc are DNS, and GC servers.
    at this point should i even worry about this two partitions. ( Domaindnszones, Forestdnszones).
    I think Dns was never configure correctly when we went from 2000 to 2003
    thanks

    HI.
    Correction. the 2003 dns and dc is no loger in the environment. It was the Primary FSMO role holder.looks like all the roles has been transfer over to the new 2008 r2 dc. 
    I did not set this domain up. but are trying to clean it up.
    I notice in dns there was only one AD integrated zone (mydomain). that the (Domaindnszones and forestdnszones) are not visible. I tested replication between the DC via sites and services and replication is ok.
    I created and AD integrated Zone in DNS called _msdcs.mydomain and it looks like it populated it with all the corrected corresponginng zones.
      _mcdcs.mydomain
    ----------dc
    ----------domain
    -----------gc
    -----------pdc
    when i try in dns to Create default application directory partition, it tells me the "partition exists"
    using adsiedit connecting to DC=domaindnszones. dc=mydomain I can see the partition same is true for Dc=forstdnszones, dc=mydomain
    so digging around i found this similiar thread:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/b5551ad5-65ec-48f7-81b2-2a00bbd93def/msdcs-doesnt-exist?forum=winserverNIS&prof=required
    I followed solution suggested by ACE. which did allow me to delete and create the new (domaindnszones and forestdnszones) partitions. but sitll not showing in dns.
    some more research showed this link..
    http://blogs.technet.com/b/the_9z_by_chris_davis/archive/2011/12/20/forestdnszones-or-domaindnszones-fsmo-says-the-role-owner-attribute-could-not-be-read.aspx
    and indeed the script did clean up the deleted 2003 Dc/dns server. and assigned the new 2008 r2 dc/dns server
    still the Domaindnszones and Forestdnszones are not visible.
    Manually Creating a delegation under Mydomain (domaindnszones forestdnszones) only yield Grayed out folders
    Manually Creating 2 domains under Mydomain (domaindnszones forestdnszones) shows the folders. but once I restart netlogon and restart dns
    the folders disappear...
    any suggestion solutions will be greatly appreciated...

  • Just purchased iphoto stream upgrade for my mac but do not see it.  How do I get it downloaded?

    Just purchased iphoto stream upgrade for my mac but do not see it.  How do I get the download or this purchase?

    Apple - iCloud - Learn how to set up iCloud on all your devices
    Apple - Upgrade your Mac to OS X Mountain Lion.

  • Mid 2010 Macbook Pro does not see other devices in airdrop

    Hi,
         I am able to turn on airdrop. There are no restrictions preventing me seeing other devices or them seeing me. I am unable to connect with my iPhone 5 or IPad air 2 in airdrop. Any suggestions to resolve this issue?
    Thanks,
    Andy

    There are none. A pre-2012 Mac will not see iOS devices in AirDrop.
    (119470)

  • When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

    When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

    Randy Ruttger
    Thanks for the follow up.
    Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
    The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
    You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
    On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
    So the remedy to the problem that you presented in this thread could have been...
    1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
    2. Move to another version of Premiere Elements (which you did)
    I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
    Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
    Best wishes,
    ATR

  • Trying to install MS Office 2011 for Mac SP 2 on my Macbook Air (Lion 10.7.3). I have to close Microsoft Database Daemon and SyncServicesAgent but can not see how to do so.  I have closed all applications.  Can anyone help? Many thanks

    Trying to install MS Office 2011 for Mac SP 2 (14.2.0) on my Macbook Air (Lion 10.7.3). I have to close Microsoft Database Daemon and SyncServicesAgent but can not see how to do so.  I have closed all applications.  Can anyone help? Many thanks

    Thanks Kurt!  I had tried all that and had tried closing both programmes from the application monitor, but SyncServices Agent refused to close.  I tried closing Launchd which is their mother application, but that just caused the screen go go blank.  In the end the two programmes let themselves be closed next time I tried the installation process so all was well.  Thanks for your help!

  • My I-pod shows up on my computer but is not recognized under devices in I-Tunes, any suggestions?

    My I-pod shows up on my computer but is not recognized under devices in I-Tunes, any suggestions?

    Hey corky60,
    I'd go ahead and give the following troubleshooting steps a shot:
    1. Try the iPod troubleshooting assistant:
    2. Restart the iPod Service
    3. Restart the Apple Mobile Device Service
    4. Empty your Temp directory and restart
    5. Verify that the Apple Mobile Device USB Driver is installed
    6. Change your iPod's drive letter
    7. Remove and reinstall iTunes
    8. Disable conflicting System Services and Startup Items
    9. Update, Reconfigure, Disable, or Remove Security Software
    10. Deleting damaged or incorrect registry keys
    You can read more about each step in detail in this article:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    I'd start at the top and work through the steps until iTunes recognizes your iPod nano.
    Take care,
    David

  • HT1449 I've transferred my itunes library from PC to Macbook pro running latest itunes and now it will not recognize my iPods (nano 4 and 5th Gen an Ipod touch).  All music is there and playable but will not recognize any devices

    I've transferred my itunes library from PC to Macbook pro running latest itunes and now it will not recognize my iPods (nano 4 and 5th Gen an Ipod touch).  All music is there and playable but will not recognize any devices. Help please

    The ipod is not a backup/storage device.
    You need to copy everything from your old computer to your new one.
    The Apple store will do this for you,  you can call apple support and they will help you, you can use google.

  • I have a Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an antennae?

    I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an additional antennae?   If so, which one because my research is confusing me about what is supposed to work with this computer.

    Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.

Maybe you are looking for

  • How do I get a network drive to atach at start up

    I just picked up a LaCie 1 TB NAS drive. It is connected to my router (Linksys 300n) by ethernet cable. I can look for a server from any of my three macs and find the drive, and mount it to the desktop. My question is, how do I set this up so each co

  • A  problem about JCO

    Hi experts:       I  meet a strange  problem,  i  deploy a webdynpro java   program which  use  rfc  module.  The SLD and JCO  connection was  good. When running this program , sometimes  it can used  but  sometime  it  run with error.      The  erro

  • HT1430 unlock a disabled Ipod touch

    How do I enable a disabled Ipod Touch?  It tells me to connect to Itunes and I am, but what now?

  • Phone volume too low

    works on speaker, inaudibly low when making a call.  they hear me fine.  Have updated, charged, done hard reset.  Help!  Thanks!

  • Add NAS to DSFW Domain

    I'm trying to add our Synology RS2212 NAS to the DSFW domain ... The crypic error back from the NAS is : "join domain fail" Interestingly, the server does get added to the Computers container Since the NAS logs are useless, what are the best DSFW log