IP: How to enhance/enrich planning-data

Dear experts,
we would like to trigger a parameterized (customizable filters) process based on the mechanisms of the integrated planning.
This process shall enrich the existing quantitive planning-figures by its monetary value. The evaluation of the value needs to be part of this process.
Could you please gimme some hint which technologie is best-practive for this kind of requests?
Can this be done using FOX-Formulars? Or is a custom planning-function the way of choice for this szenario?
Does anybody know an example or template which I could use for orientation?
Thanks for your comments in advance,
  Marco

Hi,
please check out the forums, there are lot of threads about the issue 'how to enhance a datasource'. Just to give you a hint. Use transaction rsa6 in your source system for that. Here you can enhance the extract structure, the datasource and you can do the coding...
regards
Siggi

Similar Messages

  • How to enhance open Item data source from R/3 ??

    Hello All,
    I am trying to enhance the business content extractor for open items in R/3 . The data source is 0FC_OP_01. i know this is coming from the table DFKKOP.
    I need to add sub GL ffield rom another  table from DFKKOPK .
    Please advise the step by step to enhance the existing structure and add the new field to the extractor.
    Points will be rewarded for any helpful answers.
    thanks in advance,
    AG..

    Hi,
    please check out the forums, there are lot of threads about the issue 'how to enhance a datasource'. Just to give you a hint. Use transaction rsa6 in your source system for that. Here you can enhance the extract structure, the datasource and you can do the coding...
    regards
    Siggi

  • How to run automatic plan data transfer to Profit Center Accounting?

    Can anybody help me telling how to transfer plan data automatically to Profit Center Accounting?
    At the moment I use 1ke0 to transfer manually.

    Hi,
    You can the option in Customizong "Define Versions"  > Settings for Fiscal Year > choose the Integrated Planning,
    but if already exists planned data, set the indicator by tcode KP96.
    Regards
    Elza

  • How can I lock planning data using SEM-BPS Status tracking monitor

    Hi,
    What are the pre-requisites for being able to lock planning data when using certain header characteristics
    in customizing the Status and Tracking System in BPS ?
    I have done the following and expect the locks to be set, but they are not set and the data is still available for planning :
    1. Assigned the 0COMPANY hierarchy to a subplan with a planning area which has header characteristics : VERSION and CALYEAR.
    Header  characteristic customization is as follows :
    CALYEAR = 2005
    VERSION = V1
    2. Have set the status of all nodes in the hierarchy to 'approved' .
    3. I execute a Web planning interface for this planning area with a selection of a 0COMPANY within this hierarchy, PLANYEAR = 2006, CALYEAR = 2005 and expect the plan to be locked but its not.
    Could someone kindly explain why ?
    Regards.
    PS : Hope the scenario is clearly explained.

    Hello Anuradha,
    The plan data should be locked after the status is switched if
    - the package selection used in the planning function or planning layout is entirely contained in the header selection
    - you do not access the plan data via a multi area
    - the user does not have the authorization "STS_SUP" (super user).
    It is important to note that the characteristic used to define the hierarchy is not used in the locking. The characteristic is only used to define the hierarchy.
    In your example only the characteristics year and version are relevant for locking as these are the only ones used in the header selection. The data should be locked if the package selection is year = 2005 and version = V1. If you have a selection like year = 2005 and version = V1, V2 then the data is not locked as the selection is not completely contained in the header selection. Note that even if you only use version V1 in your selection but if you use a planning layout that has V2 in a comparison column then the system will enlarge the selection and data would not be locked.
    Best regards,
    Gerd Schoeffl
    SAPNetWeaver RIG BI

  • How to update billing plan date in contract

    Hi guys!
    I*m using the bapi   BAPI_CUSTOMERCONTRACT_CHANGE to change some data in my contract
    However, I want to set the date for the beginn of the billing plan.  (Billing plan start date)  and i don't find this field in the BAPI.
    So is there a way to set and change this date?
    ...by the way. There is a rule initiated named "rule for origin of start date of billing plan". This should set the billing plan start date to the contract start date. - The contract start date is updated with BAPI_CUSTOMERCONTRACT_CHANGE - but the changes doesn't affect the billing plan startdate.
    If i edit the contract, the changes to the billing plan occur automatically, but not in the BAPI
    thanks!!
    Edited by: tom54321 on Aug 6, 2009 9:36 AM

    Hi,
    Plz check the link given below:
    BAPI_CUSTOMERCONTRACT_CHANGE is giving dump when start date of contract
    It may help you.
    Thanks & Regards,
    Sarita Singh Rathour

  • Wrong period values in Text template for upload of Plan data (KP06/KEPM)

    Hi,
    We are facing an issue in the upload template in text format for Upload of Cost Centre Planning data (Transaction KP06) in ECC 6.0.
    We have some User defined layouts for Excel upload of plan data. If we save the file as a text (tab delimited) file, the Period values above the Column"Period" do not correspond to the correct periods in ECC 6.0. for e.g. the values above Period 1, Period 2, Period 3 are shown as 6, 5, 4 instead of the correct values 1,2,3. These values are considered by the system for uploading the Planning value in the appropriate Periods and hence the values entered in the Column Period 1 in the text file are incorrectly uploaded by the system in Period 6 based on the values generated by the system in the text file.
    However, we do not encounter this issue in the 4.6C system where the values are correctly shown.
    We are facing a similar issue with the text upload template for Sales Planning data in CO-PA (Transaction KEPM), where the values generated by the system do not correspond to the correct period.
    Regards,
    Rajaram

    Hi Christian,
    Thanks for the quick reply, i followed your earlier reply in the below thread and resolved the issue. Thanks.
    How to delete CO plan data
    Hi Ajay,
    Thank you, We are uplaoding through KP06, Menu -->Extras --> Excel Planning --> Upload.
    Regards,
    Raj

  • Function for changing planned dates of activity

    How can I change planned dates of activity in code ?
    Is anyone familar with a bapi/function for this ?
    Thanks,
    Nitzan

    Hi Nitzan,
    Actually When you want to change planned date of the activity?
    If it is during the processing of the activity, you can do it by  two methods
    1)Either by using a call back function module configured in CRMV_EVENT transaction. In this function module read the date using CRM_order_READ FM to read ET_APPOINTMENT table.
    Then use CRM_ORDER_MAINTAIN to change to change the date.
    2) use the BADI order_save and implement the method  CHANGE_BEFORE_UPDATE and put the same logic.
    OR
    if you want to do it externally, use the BAPI BAPI_ACTIVITYCRM_CHANGEMULTI to change the activity dates.
    Regards,
    Annu Cyriac

  • Planning data

    Hi,
    I am doing COAP Planning, Have created planning level on the basis of Sa;les organisation , planning packages on the basis of Years... now pls let me know in which all planning methods i need to define the parameter sets  and how to input the planned data .
    Thanks !

    Hi ,
    Sales Planning---
    The process begins with the planning of target values, such as at the material
    group level. Average prices and cost of goods manufactured can be determined
    at this stage.
    In the next planning phase, plan data is distributed top down. The plan data
    for material groups is broken down into combinations of customer groups and
    products.
    In bottom up planning, the plan data can be entered manually for each sales
    representative and then brought together in a single plan version.
    In the fourth planning step, the additional plan data can be transferred to sales
    and profit planning from other business areas, such as cost center accounting or
    incoming orders.
    After planning has been finalized, the plan data can be transferred to production
    planning, allowing production plan data to be reconciled with sales planning.
    Regards,
    Arun

  • Manual upload Planned data in CO

    Hi Freinds,
    Does any one know How to upload the planned data manualy to material wise in co?
    Thanks in advance.
    Regards
    Thanura

    da

  • How do I transfer my data from damaged computer to my new itunes library on my current functioning computer. My data plan has a very limited band width cap ( I live in rural Alberta

    Hello: following computer malfunction,I purchased a new computer and downloaded itunes. when I try to sync my purchased data on my ipad I am asked to delete data from previous library. The first library has all of my stored data. How do I transfer this data to my new itunes library? . I cannot use the cloud as my data plan has a limited band width cap ( I live in rural Alberta , northern).My library may be on my tera drive, but then how do i delete this library once I transfer the files, that is if i am able to locate them ? this is a question for all itunes lovers, I love it when i know how to use it, so far not computer literate to loving it! thanks so very much for considering this problem.

    pervoskia wrote:
    Hello: following computer malfunction,I purchased a new computer and downloaded itunes. when I try to sync my purchased data on my ipad I am asked to delete data from previous library. The first library has all of my stored data. How do I transfer this data to my new itunes library?
    Copy the entire /Music/iTunes/ folder from old computer to new computer.

  • How to Get the Current data into Planning Layout from the Planning cube

    Hi,
    I have a problem in BPS.   I am selecting the data from cube based on Month org details but I want to see the latest data.   How can i get this data into planning cube.
    Like
    data
    Tran           cal month            org               amt
    1                 jan                        a                  100
    1                 feb                        a                   200
    if i want to read based on Tran org as input values I shoud get the below data but I am getting the previous data.   
    Tran           cal month            org               amt
    1                 feb                        a                   200
    Kindly help me in this regard
    Thanks
    Naveen

    Naveen,
        Are yo having issue when you save something in the layout, the data doesn't appear in the listcube ? Or do you have issue that the latest data you see in the cube doesn't appear in the layout ?
    For the former issue, please look at your selections of listcube and for the second issue, please check your planning level definition, make sure all the restrictions you have applied are valid for this latest data to be presented in the layout.
    Hope this helps.
    Cheers
    Srini

  • How Distinguish planning data and Actual data in a Planning cube

    Hi,
    I want to dispaly planning data & actaul data in a query how can i do it?
    in my query it is showing all the requests it is not distinguishing.

    Well use infoobject 0VTYPE for actual and plan differentiation
    and 0VERSION to categorise which version of Plan data it is,typically you might have different planning versions .
    Example
    0VTYPE = 10 actual
    0VTYPE = 20  plan
    0VERSION = 001
    0VERSION = 002
    0VERSION = 003
    Business decides which 0version value to be taken as final planning version once freezed.0VTYPE = 10 for actuals is always one ,it do not have 0VERSION to be taken in to account.
    Hope it Helps
    Chetan
    @CP..

  • I have an unlocked iphone 4s bought from apple. Will be in London and Paris and would like to know if how I can purchase a data plan while on vacaqtion

    I have an unlocked iphone 4s bought from apple. Will be in London and Paris and would like to know if how I can purchase a data plan while on vacaqtion

    Can I still use the phone in Boston when I move there?
    Only on a supported GSM carrier.
    Will there be networks I cant use?
    Yes. CDMA networks.
    As I understand it the 4S supports GSM and CDMA networks worldwide.
    No, you've misunderstood. The GSM iPhone you can buy in Ireland supports GSM networks only i.e. AT&T

  • How to set start of cycle/next planned date at the Maintenance Item level??

    Hi All,
    We are uploading a bulk of Strategy Maintenance Plans into the system. Each plan has multiple maintenance items and each maintenance item in a plan having different next due dates. Now if we set the Start of cycle at the Maintenance Plan level, then the next due dates of the maintenance items in that plan would be calculated on the basis on Start of Cycle (Common for all) and frequency as set in MPackages in an item Task list. Since each Maintenance item may have different Frequency and next due date, generating a call object while scheduling the plan correctly to satisfy at the Maintenance item level is not seeming possible.
    Can someone please suggest as to how do I set the Start of cycle or say Next Planned Date or Last Scheduled date at the Maintenance Item level either through configuration or programmatically.We are working on an SAP 4.6C version.It is urgent!!!

    hi
    i think specifying start of the cycle for each maintenance level is not possible ,since start of the cycle refers to maintenance plan only .
    for SAP standard kindly refer the following [link|http://help.sap.com/saphelp_46c/helpdata/en/94/43a968abc011d395bd00a0c93029cf/content.htm]
    it is better to create one maintenance item per maintenance plan,if you want to control each maintenance item independently
    regards
    thyagarajan

  • Where and how to enter plan data cost and profit center wise to get data in grr1

    Hi Gurus,
    Appreciate you can tell me where and how to enter plan amount cost center wise for cost elements and profit center wise for revenue elements????
    So that we can get this data in grr1 report.....
    Can we upload this planned data, if yes how??
    Thank you

    Hi..
    If you use classic PCA, refer to Plan Data Transfer - Profit Center Accounting (EC-PCA) - SAP Library.
    If you use new gl pca, refer to Transferring Plan Data from Controlling - General Ledger Accounting (FI-GL) (New) - SAP Library

Maybe you are looking for