Ip inspect problem, dropping important connections on 887VAMG router

Hi All.
I've got a problem on 887VAMG router. It drops important connections. As customer wants to have a firewall I created ACL and ip inspect rules ,but the router drops their connections to cloud and some websites are not opening. So I removed ACL and most ip inspect rules just to test if it effects that. And left only ip inspect http urlfilter. But still they have those problems, so I'm really stuck how to configure that firewall.
I'll be highly appretiated for any help.
The below some dropping connection review:
%FW-6-DROP_PKT: Dropping tcp session due to RST inside current window with ip ident 13968 tcpflags 0x5014 seq.no 1629693318 ack 1687676045
000049: Mar 6 11:49:21.324: %FW-6-DROP_PKT: Dropping http session <ip>:1766 69.171.242.12:80 with ip ident 26247 tcpflags 0x5018 seq.no 264144210 ack 642133125
000050: Mar 6 11:50:00.774: %FW-6-DROP_PKT: Dropping http session <ip>:4708 69.171.242.12:80 with ip ident 2425 tcpflags 0x5018 seq.no 3819869211 ack 1862176018
000051: Mar 6 11:50:52.515: %FW-6-DROP_PKT: Dropping http session <ip>:2599 173.194.34.90:80 due to RST inside current window with ip ident 22909 tcpflags 0x5014 seq.no 899975979 ack 92642430
000052: Mar 6 11:51:24.013: %FW-6-DROP_PKT: Dropping http session <ip>:4765 194.106.151.77:80 due to RST inside current window with ip ident 4118 tcpflags 0x5014 seq.no 3161679649 ack 1450263460
068974: Mar 6 05:10:14.676: %FW-6-DROP_PKT: Dropping http session 66.101.6.51:80 <ip>:1530 due to RST inside current window with ip ident 8954 tcpflags 0x5014 seq.no 2056370527 ack 2999433041
068975: Mar 6 05:35:48.385: %FW-6-DROP_PKT: Dropping http session 66.101.6.51:80 <ip>:1882 due to Stray Segment with ip ident 27148 tcpflags 0x5010 seq.no 939083425 ack 724203821
068976: Mar 6 05:36:21.734: %FW-6-DROP_PKT: Dropping http session 66.101.6.51:80 <ip>:4919 due to Stray Segment with ip ident 2945 tcpflags 0x5010 seq.no 704890853 ack 370246242
068977: Mar 6 06:29:14.628: %FW-6-DROP_PKT: Dropping http session <ip>:1214 66.101.6.51:80 due to Invalid Segment with ip ident 26797 tcpflags 0x7002 seq.no 2896034509 ack 0
068978: Mar 6 06:32:51.923: %FW-6-DROP_PKT: Dropping http session 66.101.6.51:80 <ip>:1653 due to SYN inside current window
Dropping http session due to RST inside current window with ip.
Dropping http session due to Stray Segment with ip.
These 2 are most of all. Why do they drop sessions? What do they mean?
Thanks.

I removed a firewall, ip inspecting and ACLs, but there is some delays for web browsing and slow internet connection.This model of router C887VAMG was introduced just in January, so I'm wonder if there are some bugs in firmware.
Why is this router is not capable to do inspection and firewalling? It shouldn't really drop the performance so high.

Similar Messages

Problem with network connection

Hi there,
I just installed Solaris 8 on my P-III machine with 256mb RAM. My network is fully supported by NT servers & machines. I chose to have dynamic IP thro DHCP. The network card present is 3COM. The machine boots up normally, gets an IP address & even telnet is possible from outside. But after a while, the connection dies all of a sudden. I am not able to connect to the server from outside or connect from the server to outside. When I restart the machine the cycle repeats.
Though the "ifconfig -a" shows that there are 2 interfaces (network card & loopback)with the IP unchanged even after the connection goes.
Seeking your help,
PTBabu.

calling your ISP is actuallyl a good solution, basically a router just depends on the internet connection distributed by the ISP, if it drops then connection in the router would also drop...
but if it has no problems, you can try upgrading the firmware of your router and try to configure it at the same time..

Apple Airport Extreme drops PPPoE connection on BT...

Hi folks; looking some advice here:
I'm fairly Apple centric in the house, and have an Apple Extreme Base Station (Dual Band) i.e. the current gen one.
BT Infinity became available in my area in December and I jumped on it, especially when after viewing posts on these forums which said the AE worked as the router in PPPoE mode. After engineer installation I put on the AE and configured as forum advice. Started working no problems. Happy days.... But after 48 hours or so the connection to the Internet dropped and I restarted the VDSL modem (I thought that was the issue at the time). Since then, every 48 hours or so the internet connection will stop. Its not a problem with the connection to the router, I've tried it wired and wireless, basically the internet connection stops working. I'm assuming its the AE as if I put the HomeHub back on I get stable connections with no issues for days on end. Other weird thing is that if I check my external IP address, it will change from 86.x.x.x to 109.x.x.x on the AE regularly throughout the day while on the HH its stays at one or the other for days on end. So I think the AE is dropping the connection and trying to get an address from BT but its failing and thats causing a problem. When its rebooted, Internet is back on as soon as its back up. AE shows no problems in its logs and LED doesn't indicate any issues. I've went from 7.5.1 firmware to 7.5.2 but problem still exists.
Does anyone else have this issue and if so how did you resolve it (if you did). Is my AE flaky? It worked without any problems when I was on ADSL and it was in bridge mode. Any advice appreciated.

I'm not familiar with Apple products but as your IP address keeps changing then, as you believe, it certainly points to the AE resynching all the time. Can you get any stats from it that might help? I'm sure you won't get stats from the BT VDSL modem, it just does not seem to be possible, unfortunately. But who knows, whatever stats you can get might just let one of the experts on this forum give you some idea what is wrong. Failing this (or in addition) you might check if you have begun to get exessive noise on your phone line.
I understand that if you dial 17070 and use option 2 you will be able to listen to any line noise that might be present. If there is a lot of noise then this could explain the regular re-synching. BTW this line noise test is best done from the master socket with a standard non-digital phone.
wedding
Mistakes and embarrasing goofs in e-mails are only discovered when you've sent them!

MacBook Pro randomly drops Ethernet connection.

I use my new MacBook Pro both connected wirelessly and via Ethernet to my home network. My network is connected to ADSL via a firewall/gateway router. I have a Powerbook G4 and a WinXP machine running on this same network (wirelessly and wired) without any issues.
For some reason my new MacBook Pro, however, will randomly drop off the network and will often require a reboot to reacquire a DHCP address. At first, I noticed this when transferring large amounts of data to the laptop across the network (retiring my XP machine). I thought I may have a bad cable or bad port on my hub so I switched both. After a couple more transfers, however, the problem seems to have returned.
Mid transfer, the MBP will lose connectivity to the DHCP server and assign itself a 169 address. I am unable to reacquire a 192 address from DHCP and have to restart the MBP to get back on the network.
Needless to say, this is very annoying and not at all what I expected with my new MBP.
Any thoughts appreciated as I am at whits end on this one.

I am having a similar issue. I have not yet tested with standard Ethernet, only Wireless using WPA2.
I have 3 Macs (iBook G4, PowerMac G5, and MBP (Core 2 Duo) all connecting a private wireless network consisting of a Airport Extreme and an Airport Express using WDS. All computers and basestations are running the latest versions of their respective software (10.4.8, V5.7, V6.3)
ONLY the MBP has the following problems: dropping the connection, failing to reconnect after sleep, and failing to obtain an IP address via DHCP after connecting.
The signal power reported by both the menu-bar widget and the Internet Connect application varries continually on the MBP, even though it is sitting 2 feet from the Airport Extreme basestation. Sometimes full strength, sometimes only two bars.
I have removed all preferred networks from the Network system preferences and re-added only my network. I have also removed the passwords for the routers from my keychain.
The MBP will often-times simply drop it's connection. When it does that, it will not automatically reconnect to my network. If I put the MBP to sleep it often-times will not reconnect when it awakes either. Sometimes it does, but I cannot decern a pattern. If it does automatically reconnect it will usually not obtain an IP address from the basestation.
Simply toggeling the MBP's Airport off and then on will almost always get it to find my network and automatically connect. Even if it does connect to the network, it doesn't always obtain an IP address via DHCP. Again, if I simply toggel the MBP's Airport off and on then it will usually connect and obtain an real IP address.
All of these things happen within two feet of the basestation, as well as more than 20 feet away. Both other Macs continue working just fine even while the MBP is having problems.
This is not an issue with the basestations or my configuration. It must be a problem with the drivers for the Airport card in the MBP.

Problems importing connections from a SAN directory

Is anybody having a problem importing connections from a directory that's on a SAN?
My network is setup so that the Application Data directory is out on a SAN and when SQL Developer opens up the file dialog, current directory is listed as C:\ and entry in the file name field is file://<server>/<path to my stuff>/Application Data/SQL Developer/. This looks fine but when I click on the "Open" button to get the directory listing, an error dialog pops up with the following message:
The directory C:\file:\<server>\<path to my stuff>\Application Data\SQL Developer is not accessible. Please select a different directory.
When I change the current directory to the drive that maps the SAN location, I get the same message only with C: replaced with another drive letter.
If I had to guess, the dialog is not processing the file:// protocol indicator properly before it attempts to get the directory listing. Does anyone have a work around?

Other users also had problems with network shares, so you're right that might very well be the cause of your problems.
As workaround, try mapping the settings folder to a local drive. Add this to \sqldeveloper\bin\sqldeveloper.conf:
AddVMOption -Dide.user.dir=C:\sqldeveloperHope that helps,
K.

Problem with Dropped Internet Connections on AE/Macbook

I have a dual band Airport Extreme connected to Comcast Cable. I use a first generation Macbook to access the airport. The problem is that I keep on getting dropped Internet connections. The signal strength is shown at the top rhs of the screen as being full strength (4 bars).
If I swap out the router for a Linksys WRT54G, running DD-WRT, the combination works perfectly without any dropped Internet connections. Also, If I connect the Linksys to the AE with the Linksys acting as a wireless client repeating the signal, then I can connect the Macbook to the Linksys again without any dropped internet connections.
There is something about the Macbook connecting directly to the AE. It happens intemittantly but probably multiple times a day and is very inconvenient. The only way to get it back is to reboot the router or stop/start the aiport on the Macbook.
I have tried just about every possible setup on the AE including splitting the 2.4 and 5Ghz radios into two separate ssid's and changing the channels. I am using the latest AE firmware. I have also taken the AE back to the Apple store and they have swapped it for a new one.
I dont get the same issues with my windows clients or my ipad (although i have experienced issues while steaming video - but I think that may be a different issue).
Any suggestions/advice would be greatly appreciated.

Use the advice in this thread to investigate the signal and noise levels that the Mac sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
What you may see if an increase in noise when the connection drops.
If that doesn't show anything useful, it might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) Try to select your Wi-Fi network from the AirPort menu.
3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease". Note that the fix this step implements may be temporary.
6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
These steps may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

2800 dropping Comcast connectivity after 1 day

This problem has started after comcast made their upgrades on the East coast about two weeks ago and had several problems.... The router is a 2800 series running advipservices 12.4.25e and after what appears to be about 1 day of communication the router or comcast modem stops sending out internet traffic.. If i do a SHUT no SHUT on the interface of my router connected to the comcast modem, the problem is fixed for about another day. So what do I need to look for? We have replaced the modem twice and we now have an SMC business class modem like we should but having the same problem.
Also some important information is that the comcast modem is still using DHCP right now, so I made the changes on the router to make sure it knew it was DHCP..... No fix.
BTW - if i do a show ip nat trans - there are translations on the router.
Here is the config of the interface and of my static route
interface GigabitEthernet0/0
description Connected to the Internet
ip dhcp client client-id Loopback0
ip address dhcp
ip access-group 102 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip inspect SDM_LOW out
ip virtual-reassembly
ip route-cache flow
duplex auto
speed auto
no cdp enable
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0 dhcp
Anyone have suggestions on what to look for?

Comcast could be forcing clients to change their IP addresses.
Please note your current IP address with the command 'show ip interface brief' and when the problem occurs again, proceed with the 'shut | no shut' routine then verify the new IP address.
If the IP address changes, Comcast is probably terminating the lease without informing the DHCP clients.
You can have the command 'ip dhcp client lease' under the interface to have your router request a new lease
http://www.cisco.com/en/US/docs/ios/ipaddr/command/reference/iad_dhc1.html#wp1013644
Per the attached config, everything looks fine.
Regards,
Edison

My i Phone drops WiFi connection after just a few minutes and wont reconnect unless I reset the network settings and reboot the phone?

My i Phone 4s has suddenly started to drop wifi connection after nealy months of near perfect connections?
To restore a wifi connection I have to reset the network settings and restart the phone, this only fixes the issues for around 2-3 mins?
Other quick fixes like switching wifi on and off/ switching to airoplane mode for a few secconds have no impact.
This is really annoying as I am using my data allowence very quickly, and as the phone is continually searching for a wifi connection the battery time has reduced dramatically.
I just wondered if any one else has the same issue, and any suggestions as to how I can fix this.
Thanks in Advance

Reboot.
Restore (from backup)
Restore (as new)
Test after each step. If one of them doesn't fix the problem, make an appointment at the genius bar.

MacBook Air + Time Capsule frequently dropping internet connection

I too have been having frequently dropped wireless connections between my MacBook Air (MBA) and my Time Capsule(TC). My TC is connected to a cable modem and I also have an Airport Extreme Base Station (AEBS) at a different part of my house which is used to extend my network connecting via ethernet to a PC running VISTA, and wirelessly to a printer and an older MacBook. I also connect wirelessly to my home network with two iPhones, a Squeezebox 3 with a server running on the PC. I have an Apple TV and a Squeezebox 2 connected to my TC via ethernet.
When my connection drops I will either see a Time Capsule disconnect message or if I am surfing the web, the browser just hangs. The wireless ICON strength is still pegged a the max level. None of my other devices (wireless or ethernet) connected to the TC or the other AEBS seem to drop their internet connections. I can re-establish the connection on my MBA by either turning off my MBA's Airport wireless and then turning it back on or by running the network diagnostics. The latter method usually shows green lights for all but the "Internet" and the "Server" which will have yellow lights. Usually when I select my wireless network and press continue, it will prompt for my WPA2 password which I have to reenter even though I always check the box for it to remember the password in the keychain.
After reading the various discussions on disconnect problems and trying the various "solutions" I was still having the disconnect problem.
Last night, I decided to turn off my Time Capsule and was then able to maintain an internet connection for considerably longer than before. Perhaps it was one of the other "solutions" that caused that. After turning my TC back on, the disconnect problem reoccurred within about 5 minutes.
Next, I did my too frequent Time Capsule remedy which was to disconnect the power and then reconnect the power. (Seems like some of these devices (APPLE TV included) could use power switches.) I then deleted the .sparsebundle backup file on the Time Capsule. I was then able to restart Time Capsule backup and things have been running uninterrupted for over 12 hours...still backing up (20GB in 12 hours? Doesn't seem very fast!). I can report back later if this actually "fixes" my disconnect problems in the future. I am dubious that it will.
I have several questions about the MBA and the TC/Time Machine backup operation.
1.) I often forget about the TC when I close the lid on my MBA and haul it off to work. At work (connecting via ethernet), I will eventually get a TC disconnect error. But I am wondering if there are points in the backup process where a random disconnect will cause some sort of TC corruption. What is the recommended way of handling this? Should I always stop the Time Machine backup before turning off my MBA? (A nuisance if so!)
2.) What is happening when the TC backup operation stops functioning and hangs up the MBA's internet connection? (I see lots of messages logged in the system log when this happens; but, of course, I don't have much of a clue of which ones are normal and which are not normal. I could send a copy of the logs when it happens next (I am assuming it will).
Also one other anecdote. A few months back, I had taken another AEBS to my work to use during a training conference. My MBA kept dropping its connection while the other PC laptops in the room maintained their connections...(very embarrassing!). Maybe one of the other "solutions" would have fixed the problem or maybe if I had just turned off my Time Machine backup it would not have disconnected. I will repeat that exercise when I get a chance now that I have some things to try.
It seems pretty clear to me from my own experiences and the discussion reports of others that the disconnect problem lies in the MBA's wireless internet connection software or the configuration of it. It seems like it is having difficulty recovering from various wireless connection "mishaps".

Folks, I was having a very similar problem for the last 6 months. My connection was fine until June 2008, after which my Macbook and my Time Capsule would constantly conflict. If I rebooted or reset the TC, or the MB, things would be fine for a few minutes or sometimes a few hours and the problem would recur soon thereafter. About a month ago, I had to do a clean reinstall and the problem vanished for about 5 days, after which it reappeared. My MB never had a problem at work, or at someone else's home or with other routers, only with TC. Apple sent me a new TC, then they replaced my Airport card but the situation did not change ... UNTIL ABOUT AN HOUR AGO.
An hour ago, I called Apple for the nth time in the last 6 months, and the rep heard me out (just like the previous n-1 reps). He then asked me to to System Preferences --> Accounts --> Login Items and asked if Real Player Downloader showed up in my list. Indeed it did. He asked me to remove it, and told me that Apple had just figured out that the Real Player downloader was recently found to be causing a drop in the connection between Macbooks and the TC (as well Airport Express).
The problem I've been having baffled everyone. All the previous reps, the guys at the Genius Bars, nobody had a clue. Joe (the rep I spoke with this morning) seemed very confident that the removal of the Real Player Downloader from the list of login items would resolve the problem. So far, so good. My connection seems solid (its only been an hour, but earlier it would drop after 5 minutes of use).
I hope my problem that (literally!) used up hundreds of hours of my time has been finally resolved. I hope this solution will work for at least some of you as well. What gives me hope is that this solution is logically consistent with the history of my problems. I probably first downloaded Real Player in June 2008. And when I did a clean install, I remember downloading Real Player a few days after the reinstall. So I'm pretty hopeful that my issue has been finally resolved.
Shame on Real Player for putting out a defective piece of software. And thank you Joe!

Loop drops when connected wireless (NI 9191)

Hi,
I cannot figure out why a NI cDAQ 9191 chassis has connection drops when connected wireless and works
perfectly when connected thru LAN.
I wrote a little test VI to check the connection accuracy. The chassis has a NI 9375 I/O module plugged in.
A Moxa AWK3121 is used as wireles access point. What I do is check 5 digital inputs and control 3 digital outputs.
The outputs are continuously placed on/off at a different rate. I use an event loop and a main loopt that communicates
to the chassis at a loop rate of 10ms.
The chassis, laptop and Moxa A.P. are all close together on my desk. The Wifi signal is excellent.
Now, the code i written is probably not optimal.
But... If I start with connecting the chassis with a LAN cable to my laptop, Wifi Disabled, Linked Local. The communication is perfect.
No drops between the loops and the real time.
No communication errors. Runtime was 52 minutes.
Second test. Connected the chassis to the Moxa A.P. with LAN cable. Laptop connected wireless to the Moxa A.P.
Chassis still in Link Local. Ik can access the chassis in MAX. No problem.
When I run my test, I immediately see loop pauzes. After one minute there can be already a difference of 20 sec.
between calculated looptime and real time. Sometimes the active light on the chassis goes off and on.
When the active light is out, the loop is on hold. (Wich is normal as I assume the DAQ VI's are waiting for response.)
After appr.10 minutes the error -50405 "No Transfer in progress because transfer was aborted by client".
If I look at the timings there is already a difference of more then 5 minutes between the loop timing and the real time.
As last I tested with the chassis and the PC connected wireless to the Moxa A.P.
I did not get the -50405 error, but again loop drops. After 10 minutes there was a shift of 2 minutes.
Has anyone experience with wireless connections with the NI 9191 chassis?
Can I change my code? Did I mis something? (I'm a newbie to Labview)
Any help or suggestions would be appreciated.
Thanks in advance.
Frankie.
Labview 2014 SP1 (32bit) on Windows 7 Enterprise (X64)
Chassis and Moxa all updated to the latest firmware.
Solved!
Go to Solution.
Attachments:
Chassis919Tester.vi ‏51 KB
Symmetrical_Pulse_Generator.vi ‏55 KB

I am not clear on whether you are connecting the two together "in it's own little network" (which implies "router" and not "AP") or if you are connecting to the LAN through the wireless device (in which case it is entirely appropriate to refer to the wireelss device as an "AP"). Your last post about hot spots is what confused me.
But as you said, the biggest worry is the active light. Try using a different router/AP. I've seen routers overheat and reset themselves before due to inadequate heat sinking. i.e., Someone (not me, I swear!) dropped the AP and knocked the heat sink off the chip.
As for the delay, if you are indeed using the Moxa as an AP, are you sure you're connecting to your AP? If you're connected to a hotspot instead, your throughput will be at least halved - and maybe even 1/4 bandwidth if your AP happens to have connected to a different hotspot than you did. If you are using it as a router, try differnt bands or channels to see if you can get around any interference your company wireless network might be generating.
In general, conclude that wireless isn't the best way to connect test devices together.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Extreme Base Station suddenly dropping internet connection

I have an Extreme Base Station (802.11n Fast Ethernet) which has been providing wireless internet and printing to two imacs pretty flawlessly for several years. It seems to be a fairly simple network. DSL modem (to WAN port) and USB printer cable plugged into back of Base Station.
Several days ago, the Base Station began dropping connection to the internet every few minutes. If I connect the modem directly into the computer, I have no problems with losing connection. So, I began looking for solutions online and have been trying everything I could find to do. I've scoured the forums here, and everywhere and read a bazillion posts.
I've done a hard reset of the Base Station, I've tried different channels, I've unplugged, waited ten minutes, and replugged in a myriad of sequences, including unplugging both the modem (Zhone/Paradyne 6381-A3) and Base Station overnight. The only thing I haven't done is roll back the firmware (currently 7.4.2 I believe). I'm still experiencing the same problems and am at my wits end. I've spent hours now trying to fix it and need to do other things like shop for groceries and vacuum! So, I'm posting, in hopes someone might be able to point me in a more productive direction.
Is it possible the Base Station hardware is failing? What are the signs and symptoms? I hate to spend another $179 and still have the same problems.
Thank you.
Most kindly,
---Susan

.
Dear Bluenova - ( +or other interested readers+ )
I know that this reply is two months since this topic was initially posted.
This is a longstanding Airport Extreme ( AEBS ) problem that's been noted since 2006-2007.
It has been an ongoing issue for me -AND- I continue to experience it even after recently upgrading my AEBS.
I finally called AppleCare in mid-Sept. and opened a formal problem case report.
As of today (Oct 15, 2010) I still have an open & unresolved case with AppleCare.
The problem has been escalated twice -and- is now referred to Engineering Dept for research & resolution.
I was curious what steps or actions you have taken -and/or- if you still experience the problem.
_Readers Please Note_
Many users have posted messages regarding problems with Airport Extreme *+DROPPING CONNECTIONS+* .
However, with careful reading, it becomes obvious that many forum posters are not sufficiently clear
-and- often confuse or do NOT make the distinction between ..... DIFFERENT TYPES OF CONNECTION PROBLEMS.
. ( wifi/network connection probs - vs - internet connection probs )
SEE HELPFUL POST BY WILLIAM KARCHINSKI
Topic : *+Having issues with your AirPort connection? Please be specific+*
http://discussions.apple.com/thread.jspa?threadID=2227197
FWI
If you suspect that you are having the *dropped internet connection* type problem,
YOU CAN CHECK & WATCH IT HAPPENING IN THIS MANNER
Set Airport in Menubar to *"SHOW TIME CONNECTED"*
. *- +and also+ -*
Open Airport Utility --> AIRPORT --> SUMMARY window
.... and leave it visible somewhere on your screen while you web browse.
Now, once the internet connection drops or is lost ...
... in the Airport Utility Summary window - you will see the loss of the assigned IP Address
. *- and -*
.... in the Menubar - the time connected will reset to 00:00:00
If you have a new or ongoing problem that relates specifically to ....
.... Airport Extreme – dropping or losing *Internet Connections* ... ( +not wifi connection type probs+ )
.... please let me know.
I would like to be able to correspond directly with others via email to share info
(such as what modems, ISP's, time of day or conditions with which this problem has been found to occur)
I will then be glad to pass that info on to AppleCare in trying to find a cause (and solution) for this problem.
If this issue was treated collectively maybe AppleCare would address it with more resolve & urgency.
I'll check back with this thread for replies from other interested users.
.

IPad Air after upgrade to ios 8 continue to drop WiFi connection

On September 19, I upgrade my ipad air to ios 8, and it had been dropping Wifi connection ever since. I was browsing using Chrome and next thing the browser hang up; then error message informed me to no network connection. By the way, my network was strong (5 bars), because I was streaming to my Roku in HD without any issues. At the same time, my Airplay do not want to stream the content in full screen either. It only mirror what have see on my ipad, not allow me to go full screen on TV. I hoped Apple will step up and correct this issue as soon as possible; I miss the good old day of reliable upgrade from Apple.

Yes, and hopeful 8.1.1 will help. It's supposedly in beta testing.
http://arstechnica.com/apple/2014/11/ios-8-1-1-said-to-address-iphone-4s-and-ipa d-2-performance-problems/

Macbook keeps dropping internet connection but other devices are fine???

I work from home & this is making me completely insane. My MacBook will drop the wifi connection constantly, I will be doing things just fine & the all of a sudden I will not be able to load something & any tab/page I have open will be "spiraling" or loading and get frozen up. My gmail contact list will all go to offline and I get a message that gmail lost connectivity. The bars on the top right of my monitor showing wireless connection will always be there (usually all 5 are dark), and it will say (both under that icon & in System Preferences-Network) that I am connected to my airport extreme. Sometimes my Skype icon at the top will stay green & logged in, but most of the time it goes grey/offline as well. I lose connectivity for anywhere from 2 min to 15 min 5-6 times a day (and that is just when I'm on the computer, I'm not on it all day) and then it just spontaneously comes back again.
My husband has a MacBook also & will have no problems even when I am having problems, and my ipad will get on our wifi no problem at the same time, so I know it is not the router/modem. This computer has been giving me trouble for months, with slow connections previously and then not being able to connect to wifi at my mother's house and then in an apartment we were living in temporarily, but I thought once I was back on my own Airport it would be ok and now it is worse. Firefox doesn't work either, so it is not Safari, although I use Safari primarily & it starts in there (and I got to Firefox to double check & see if I can get online in there which I can't).
I went to the Genius Bar the other day & was beyond frustrated, as the guy 'pinged' google 100 times with no problems, checked settings, ran some diagnostic & visited a few websites, told me nothing was wrong, he didn't know what to tell me and just looked at me like I was crazy, then started messing around on his ipad and ignoring me. When I asked if maybe my computer got infected or corrupted by something he again just stared at me and said there is no known virus for the Mac OS. He gave me NO advice, nothing to look for diagnostially when it occurs again so I feel like I'm at a total loss here. Please help.
On a side note, in the last week or two Safari is also now not saving any of my cookies/passwords/logins for more than a day or two and I have not changed a single setting. Plus I set up gmail 2 step verification b/c I got a notice that my acct had been accessed from another state (I changed password, etc) and it is supposed to remember my computer for 30 days but I have to get the text sent with a new verification code like every other day because it is not remembering me, which is very annoying.
Could these issues all be connected????

Hi Lisa,
Seems we have a similar problem and it is driving me nuts.
I don't have the password problem, but my connection drops out for 2 minutes and over.
If you bring up the diagnostics window from the prompt on the Safari page, when pages won't load again, it will tell you that everything up to the last 2 options is fine.
I've had the problem ever since I upgraded to the last MacOs, might have been for over a year now.
Since a couple of weeks I actually found that when no page is loading at all, go to the search field in the top bar of Safari. (my default is Google) it will actually bring up the Google page, then open just any other page and usually that will let you continue to browse the internet untill it plays up again.
I know it is very annoying but untill a fix or a solution this will have to be the way for me to work around it.
Finding the time to reinstall Lion is probably the best option.
Hopefully someone else does have a better solution for the time being.

Windows 8.1 Lock Screen drops network connectivity when screen locked using Win+L

Hi!
I was sent here from Microsoft Community forum. The question is:
Since Windows NT 4.0 I'm using Lock Screen to prevent people from accessing my computer when I'm leaving my room. First I was using CTRL+ALT+DEL / Lock Screen, then switched to Win+L keyboard shortcut when it was first introduced.
Everything was fine until I switched to Windows 8.1 computer (Sony Vaio Duo 13 with Broadcom wireless network controller). This machine is 8.1, not 8.0 upgraded to 8.1.
My problem is that when I hit Win+L combo the Lock Screen (with clock etc.) is displayed. Then, despite I have configured not to turn off display, the screen goes blank (after 30 seconds since lock) and network connectivity is cut off from desktop
apps (I suspect the system goes into Active Standby mode, because Modern UI apps like Tune-In radio keep working fine).
100% repeatable scenarios:
## Scenario 1 ##
1) Log in
2) Open desktop app that uses network connectivity. Outlook 2013 from Office365 subscription
3) Check that it has connected
4) Lock screen (Win+L)
5) Wait for 30 seconds (first incorrectly posted as few minutes) as screen goes black
6) Unlock screen (using password)
7) In right corner of Outlook app you will see "Unable to connect with Exchange server" and few seconds later it will reconnect sucessfuly
## Scenario 2 - the more annoying ##
1) Log in to Win 8.1 computer
2) Connect to it using SMB (in my case I wanted to transfer 30 GB of files from local hard drive C: to server) \\COMPUTER-NAME\c$ from Windows Server 2012 R2
3) Start copying files from computer to server
4) Lock the screen on computer
5) As soon as screen goes black server displays message "Lost connection to the resource. Try again?"
6) Unlock screen on the computer
7) Click "Try again" and it will continue copying files
My power settings are set to go into stand by after 5 hours and if I not lock the screen it doesn't go to sleep before 5 hours.
When I lock the screen using Win+L it goes into (probably Active) Standby mode.
Is there any way to prevent it from going to Active Standby when locking screen? I need the screen lock for security reasons but I don't want it to drop my network connectivity on remote desktops, file transfers and other desktop activities before 5 hour
timeout.
This issue is not related to more or less known wireless network connectivity problem that happens to many Intel Haswell computers. Mine doesn't exhibit those problems. I can easly push 100 - 200 GB of wireless data without network drops.
Computer information:
Sony Vaio Duo 13: SVD1322C5E
Intel Core i5-4200U
8 GB RAM
Windows 8.1 Pro 64-bit
Broadcom 802.11n SDIO network adapter
Originally posted at: http://answers.microsoft.com/en-us/windows/forum/windows8_1-networking/windows-81-lock-screen-drops-network-connectivity/099f16bd-b00d-4ba9-b833-48bf1d55ffe4
Best regards,
Sergiusz

Same issue here using Surface 3 Pro with either internal WLAN or MS USB LAN Adapter. I'm frequently used to keep open connections over SSH to some servers. On switching to lock screen explicitly by pressing Win+L or implicitly due to idle timeout all
connections to servers are lost. In addition, I don't get any notifications on incoming Skype messages (using Skype for desktop) when lock screen is active.
Neither NIC is showing "Power Management Tab" according to step 5 of instructions above.
Additionally observing USB LAN NIC seems to be kept active after activating lock screen, but traffic stops (according to its flashing light) when lock screen is switching off display. Blanking display doesn't seem to be adjustable in System Settings (Energy
Options accessed through Win+X).
Find attached log file of powercfg -energy -duration 300 ...
Log file is in German. It basically claims unset timeouts for deactivating display while running attached to power supply though lock screen is turning off displays within 1-2 minutes.
Energieeffizienzdiagnose-Bericht
Computername
KRITIAS
Überprüfungszeit
2015-01-10T15:07:47Z
Überprüfungsdauer
353 Sekunden
Systemhersteller
Microsoft Corporation
Systemproduktname
Surface Pro 3
BIOS-Datum
10/16/2014
BIOS-Version
3.11.0350
Betriebssystembuild
9600
Plattformrolle
PlatformRoleSlate
Netzbetrieb
true
Prozessanzahl
67
Threadanzahl
1319
Berichts-GUID
{1a168801-c189-46fe-811c-235e6bf2bd0d}
Analyseergebnisse
Fehler
Energierichtlinie:Verdunkelungszeitlimit ist deaktiviert (Netzbetrieb)
Der Bildschirm ist nicht so konfiguriert, dass er nach einer Zeit der Inaktivität verdunkelt wird.
Energierichtlinie:Standbyzeitlimit ist deaktiviert (Netzbetrieb)
Der Computer ist nicht so konfiguriert, dass nach einer Zeit der Inaktivität automatisch der Wechsel in den Standbymodus erfolgt.
CPU-Auslastung:Prozessorauslastung ist hoch
Die durchschnittliche Prozessorauslastung während der Ablaufverfolgung war sehr hoch. Das System verbraucht weniger Energie, wenn die durchschnittliche Prozessorauslastung sehr niedrig ist. Überprüfen Sie die Prozessorauslastung für einzelne Prozesse,
um festzustellen, welche Anwendungen und Dienste den größten Anteil an der Gesamtprozessorauslastung haben.
Durchschnittliche Auslastung (%)
45.31
Warnungen
Plattform-Zeitgeberauflösung:Plattform-Zeitgeberauflösung
Die standardmäßige Plattform-Zeitgeberauflösung beträgt 15,6 ms (15625000 ns) und sollte immer dann verwendet werden, wenn sich das System im Leerlauf befindet. Wenn die Zeitgeberauflösung erhöht wird, sind die Technologien zur Prozessorenergieverwaltung
möglicherweise nicht wirksam. Die erhöhte Zeitgeberauflösung kann auf eine Multimediawiedergabe oder Grafikanimationen zurückzuführen sein.
Aktuelle Zeitgeberauflösung (100-ns-Einheiten)
10007
Maximale Zeitgeberperiode (100-ns-Einheiten)
156250
Plattform-Zeitgeberauflösung:Ausstehende Zeitgeberanforderung
Von einem Programm oder Dienst wurde eine Zeitgeberauflösung angefordert, die kleiner als die maximale Zeitgeberauflösung der Plattform ist.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Energierichtlinie:Bildschirmzeitlimit ist lang (Netzbetrieb)
Der Bildschirm ist so konfiguriert, dass er nach mehr als 10 Minuten Inaktivität ausgeschaltet wird.
Zeitlimit (Sekunden)
900
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Verbundgerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_0250
Portpfad
1,2
Standbydauer (%)
14
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Surface Ethernet Adapter
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_07AB
Portpfad
1,1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Generischer USB-Hub
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_1006
Portpfad
1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Eingabegerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_0797
Portpfad
1,3
Standbydauer (%)
14
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
firefox.exe
PID
5968
Durchschnittliche Auslastung (%)
1.57
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\xul.dll
0.60
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\mozjs.dll
0.27
\SystemRoot\system32\ntoskrnl.exe
0.16
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
System
PID
4
Durchschnittliche Auslastung (%)
0.59
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.24
\SystemRoot\system32\DRIVERS\igdkmd64.sys
0.12
\SystemRoot\system32\DRIVERS\avc3.sys
0.07
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
dwm.exe
PID
6264
Durchschnittliche Auslastung (%)
0.47
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.10
\Device\HarddiskVolume4\Windows\System32\dwmcore.dll
0.09
\SystemRoot\System32\drivers\dxgkrnl.sys
0.06
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
Skype.exe
PID
11008
Durchschnittliche Auslastung (%)
0.26
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Skype\Phone\Skype.exe
0.11
\SystemRoot\system32\ntoskrnl.exe
0.05
\SystemRoot\System32\win32k.sys
0.04
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
svchost.exe
PID
1528
Durchschnittliche Auslastung (%)
0.25
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.16
\Device\HarddiskVolume4\Windows\System32\ntdll.dll
0.02
\SystemRoot\system32\drivers\ndis.sys
0.01
Informationen
Plattform-Zeitgeberauflösung:Zeitgeberanforderungsstapel
Der Stapel mit den Modulen, die für die niedrigste Plattform-Zeitgebereinstellung in diesem Prozess verantwortlich sind.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Aufrufender Modulstapel
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\d3d9.dll
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\CEF\libcef.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
Energierichtlinie:Aktiver Energieplan
Der derzeit verwendete Energieplan.
Planname
Ausbalanciert (OEM)
Plan-GUID
{381b4222-f694-41f0-9685-ff5bb260df2e}
Energierichtlinie:Energieplancharakter (Akkubetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Akkubetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:Videoqualität (Akkubetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Videoqualität und Energieeinsparung ausbalancieren
Energierichtlinie:Energieplancharakter (Netzbetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Netzbetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:802.11-Energierichtlinie für Drahtlosverbindungen ist "Maximale Leistung" (Netzbetrieb)
Die aktuelle Energierichtlinie für 802.11-kompatible Drahtlosnetzwerkadapter ist nicht für die Verwendung von Energiesparmodi konfiguriert.
Energierichtlinie:Videoqualität (Netzbetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Für hohe Videoqualität optimieren
Systemverfügbarkeitsanforderungen:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben.
Akku:Akkuinformationen
Akku-ID
1F11LGC_LGCX863568
Hersteller
LGC_LGC
Seriennummer
1F11
Chemie
LION
Langfristig
1
Versiegelt
0
Zyklusanzahl
33
Vorgesehene Akkukapazität
42157
Letzte vollständige Aufladung
44209
Funktionen der Plattformenergieverwaltung:Unterstützte Standbystatus
Mithilfe von Standbystatus kann der Computer nach einer Zeit der Inaktivität in einen Energiesparmodus wechseln. Der S3-Standbystatus ist der standardmäßige Standbystatus für Windows-Plattformen. Im S3-Standbystatus verbraucht der Computer nur die Energie,
die notwendig ist, um den Arbeitsspeicherinhalt zu bewahren und die Arbeit mit dem Computer schnell fortsetzen zu können. Sehr wenige Plattformen unterstützen den S1- oder S2-Standbystatus.
S1-Standbymodus unterstützt
false
S2-Standbymodus unterstützt
false
S3-Standbymodus unterstützt
false
S4-Standbymodus unterstützt
true
Funktionen der Plattformenergieverwaltung:Unterstützung von Verbindungsstandby
Mit dem Verbindungsstandby kann der Computer in einen Stromsparmodus wechseln, in dem er immer eingeschaltet und verbunden ist. Der Verbindungsstandby wird soweit unterstützt anstelle der Systemstandbystatus verwendet.
Verbindungsstandby unterstützt
true
Funktionen der Plattformenergieverwaltung:Die adaptive Bildschirmhelligkeit wird unterstützt.
Dieser Computer ermöglicht die automatische Helligkeitsregelung der integrierten Anzeige durch Windows.
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
0
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
1
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
2
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
3
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Gerätetreiber:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben.

Ip inspect problem, dropping important connections on 887VAMG router

Similar Messages

Maybe you are looking for