IP Issues on i7 iMac and Aiport Station

I bough the iMac not even two weeks ago and it worked wonderfully. I just did a iMac Firmware Update via the Software Update tool and now every time it goes to sleep it some how comes back with the following Wifi Error:
Another device is already using the 192.168.1.79 IP.
The network is set to Auto DHCP and so is the Apple Airport Station (802.11n). I also have several other Macbook Pro 15" laptops, one Macbook 13", and 3 smart phones running of the same Airport Station and they all seem to connect just fine.
Now I'm regretting in doing the firmware update on this machine.. nothing but issue. Anyone having the same issue and can possibly provide an answer.
Also.. I tried setting up the IP Manually and it works until it goes to sleep, then stops working as if it can't get a connection out to the internet.
Help is always appreciated!
Eddie
Message was edited by: Ed Basso

I was pleasantly surprised as well!
I ordered mine in the afternoon on the 26th and it was here on March 1st. Migration assistant worked well with transferring everything from my 24". I'm just wondering if anything has to be tweaked with it. I thought I had read somewhere that there are certain settings to change to make the machine fully optimized as far as speed is concerned. Maybe I was seeing things. Seems fast enough right now!
JS

Similar Messages

Sync issues with LR5/iMac and iPad (IOS 8.1)

I have been using published folder to sync my photos with my iPad and iPhone, and for the past two years, it's been working fine but lately, something has gone awry. For some reason, now when I edit a photo in LR and it republishes the photo (as a jpeg), itunes simply doesnt see the phtot and it disappears from the folder on the ipad. Yes, the new publised photo is in the iMac and it appears just like the photos before and after it, but iTunes doesn't send it over. I have tried manually exporting these photos to a different folder to see if it will bring them over, but they still wont come. I've tried renaming as well, but still no luck; it's almost as if LR is creating some strange jpeg that iTunes cannot see.
Any ideas?
Thanks.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Keychain sync issues between new iMac and older 10.4.11 machine

I am having a tough time since purchasing a new imac - I can get mobileme working reasonably well with few issues if I have keychain syncing disabled on both machines but I would like to get to the bottom of this and be able to sync it automatically.
Here is a description of the issues I am getting in spite of performing the regular advice to set up a new account once the issue starts and move all my stuff into that new account.
After a few syncs I get the advice "please enter the password for "(myname), Aos Powerbook G4 17""
Now the A has a double dot (umlaut ?) above it and the o has a ^ above it - not sure how to get that with this keyboard or I would have done it ...
This box is empty below this dialogue (expecting a passcode) and whatever password you enter (I have tried all of mine repeatedly over several weeks now !) it just doesn't accept it. It is as if someone else in a parallel universe has your mac and has entered a new passcode !
Occasionally I will get 'the keychain on '^&G*)(" has been altered do you wish to merge' (not exact text but something like) and I am no longer able to send emails without entering my email account password first and every so often.
There are other weird symptoms too - but does this trigger anyones grey matter ?
IS there an issue between 105 and 104 syncing ?
Thanks
Andy

I should also point out that I have an iphone and this poor puppy has tons of apps and data associated with the apps on it......
Anyone have a clue as to how I back this up with the new pbook user account I have created to sidestep the keychain issue ?
The only option it shows erases the iphone's applications and their assoc data from what I can see ....
Thanks
Andy

3D issues with 2007 iMac and Photoshop CS6

Hi,
Prior to the 13.1 Cloud member update, the 3D engine worked on my 2007 iMac with a 128VRAM video card. With the upgrade it no longer works. Is there a way to return to the pre-update state? From internet searches I performed, the card is soldered to the motherboard, and not easily upgradeable. I know I'm not the only Photoshop user who has this issue. Illustrator's 3D engine still works. Seems like the one for Photoshop should as well. Thanks for your consideration.

Follow up: I was able to re-install the earlier version of Photoshop CS 6 on my computer.

Graphical issues with 2011 iMac and Lion

I have a 2011 27" iMac (core i7 and AMD Radeon HD 6970M 2GB) with 2 external displays, most of the graphical issues are present in the external displays but the menu bar, dock and volume popup all appeared distorted on the main display.
On the external display most apps look like this http://i.imgur.com/FQ0AJ.png
there are a few exceptions like steam, safari and itunes, these apps don't show any distortion apart from when being switched the the other displays though, almost all other apps apear disdorted (as shown in the image) on the external displays.
I never had these issues with Snow Leopard but as far as I can tell its some kind of graphics driver problem, don't know how this wasn't spotted in the beta..
More images:
http://imgur.com/bK3jBl&RSaix
http://imgur.com/bK3jB&RSaixl

I also have a 27 in iMac Core i7 3.4 with the 2GB Graphics Card.
I called apple care and informed them + I recorded a video of it happening with ScreenFlow and sent it to apple. Please call apple care and inform them so they escalate this issue.
When I called them they sent me a file to Capture the Data of my computer to see what happened and what caused it.
By the way this computer should be able to connect with 6 screens simultaneously.
Please if you are experiencing this issue write here to inform apple about and call apple care or see the genius bar.
Thanks

TS2972 Connection Issues with Macbook, iMac, and Apple TV 3

I have an Apple TV 3 (ATV3) and my iMac connects via Home Sharing just fine, but my MacBook running 10.6.8 doesn't show up, nor does it recognize the iMac in iTunes. All devices have Home Sharing turned on using the same AppleID. Any thoughts as to why my Macbook seems to be the odd one out?

I had this problem earlier and was able to solve it by checking the display setting in the System Prefrences. This link will help you. http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=B%26sec tion=4%26tasks=true

So many issues - family of 5, i am using my wifes apple id on my iPhone, my daughter is using my apple id on touch, i need to get all iTunes content off an old PC onto new imac and i just got iphone 5 and want to be able to have evreything work - help!

5 plus years ago my wife had the only Apple ID and as a family we all used her Itunes account to buy and listen to music. A couple years later, I (husband) bought my first iPhone - the only iDevice in the household. When I set that iphone up, I used the wife's apple ID as I wanted access to all of the itunes music we had as a family. So now years later, all of my Apps etc have been purchased via the Wife's Apple ID. To make matters worse for my situation, my 10 yr old daughter got an iTouch for Christmas and i decided to use my actual (husband) Apple ID as daughter is a minor and I felt I could manage her iTouch Apps content that way. We have just recently bought our first iMac and I had yet to understand or get to work the iCloud or the Home Sharing of iTunes. To make matters worse, I have never synched my 3G iphone because of the whole Apple ID issue. I should also mention that the primary 'authorized' computer for my wife's itunes account is an old PC that we almost never use anymore as it runs soooo slow. So I am left to wonder how to go about making the transition to get the old PC 'deauthorized' after I somehow transfer all itunes files from the old PC to the new iMac. I now have the new iPhone5 and i REALLY want to get to the point where i have my iphone on my apple id and my wife has her apple id (no iphone for her yet - probably coming soon though). On the new iMac i have created a login for me and one for my wife. I was able to login to itunes on her imac login and i was able to set up iCloud. it works! - but now my calendar, contacts, photos, etc are on her profile login of the iMac! HELP me PLEASE!!

Your Apple ID should not be causing problems with your browser. If you describe the problems you are having we might be able to help with those.
regards

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

24" iMac and 3GB RAM limit issues

I have a legitimate concern with the 24" iMac and wanted to know if anyone else thinks it's an issue. Read Apple's tech note on late model 2006 iMacs including the new 24" model.
http://developer.apple.com/documentation/HardwareDrivers/Conceptual/HWTechRAM/Articles/RAM_implementation.html#//apple_ref/doc/uid/TP40003899-DontLinkElem entID5
In order to use RAM in an interleaved fashion it states you must use matched pairs. Meaning same size and type. SO.....if the new iMacs will take a 2GB SO-DIMM then why won't it register 4GB total? You can configure your new iMac with 3GB of RAM but it won't be interleaved. On top of that 2GB SO-DIMMs are super expensive in the +$700 range. More then MacPro's FB-DIMMs.
I don't see anyone talking about this but it seems to be a legitimate concern.

That IS the point, what person paying $2000 for a computer would be willing to pay another $1500 for a 4GB RAM upgrade? I just think right now it's hurting Apple's sales of the 24". The 24" encroaches on the prosumer market and at this point in time an affordable 2GB of RAM may seem adequate now but most likely not in 6 years. Which is how long I had my Digital Audio Power Mac. So I think anyone in the prosumer market NOW, like myself, looking for a machine that will last a few years may look away from the 24" and steer toward the Mac Pros. My needs fall squarely in between the 24" iMac and Mac Pros but unfortunately my budget does not. I could live with the 24" even with the expensive cost of the 2GB SODIMMs. I would in fact wait until the prices fell. What I can't live with is the fact that the iMac will only ever be able to use an uninterleaved 3GB when the possibility of an interleaved 4GB seems to be there. I was only able to keep the Digital Audio because I squeezed every ounce of life I could out of it because of various periodic upgrades.
Reluctantly I'm going with the Mac Pro but I REALLY wanted to get the 24" iMac. Thats all.

Issue w/iMac and Furman power conditioner

Greetings,
I just recently purchased a Furman Power Conditioner PL-Plus Series II
-- go here for info on it: http://www.furmansound.com/product.php?div=01&id=PL-PLUS_II --
to plug my home recording studio gear into (powered monitors, outboard gear, external hard drive, etc). Since it's basically just a really high-end surge protector, I assumed that plugging my iMac into it would also be a good idea. However, when plugged into the Furman my iMac loses all of its busses: no USB, no Firewire, no ethernet. This caused quite a state of panic until I resolved the issue by unplugging it from the furman and back into a standard power strip/surge protector; when I did the busses all returned. My question is simple; does anyone have ANY clue at all why this would happen? Nothing else that I connect into the furman seems to have any adverse effects at all (so far) so I can only assume the issue is with my iMac and not the Furman. At any rate, if anyone can think of any info that might be useful in dissecting this wierd little (or maybe not so little?) issue, it would be much appreciated.
Thanks,
Brandon
P.S. I have already contacted Furman and posted in the iMac and Logic Pro forums as well. Searching for info from as many reliable sources as possible!
iMac G5 Mac OS X (10.4.9)

That would seem to be the case. However, everything else connected to the Furman works fine; powered monitors (2 pair), a Glyph external hard drive, a dbx 166XL (compressor), and a Behringer midi controller (BCF2000) (my interface, a M-Audio 1814, is firewire bus powered; though no, not a factor, as I tried booting up the computer jacked into the Furman with the 1814 disconnected). Also, other than the busses, nothing else about my iMac seemed to be affected. It's a fairly strange situation. I even talked to a Furman rep to no avail; we went through a checklist of things, which I had pretty much gone through before talking to him. He seemed pretty adamant that if it were the Furman, the other devices would have apparent problems as well (though, granted, they might be a little harder to detect than issues with my computer...). He's basically now waiting to see what I find out here as well! And so... I'm still at a loss trying to figure out what exactly is wrong. Fun stuff....

Issues with iCloud synchronisation and contacts over two or more devices. iTouch and iPad2 sync with different results from iMac. Thoughts?

Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Having an intermittent issue where my iMac blanks out on me. On restarting I get bands running down the screen with pixels jumping around, then the white screen of death and nothing... Wouldn't restart all weekend, now fine..? any ideas whats wrong?

Having an intermittent issue where my iMac blanks out on me. On restarting I get several bands running down the screen with pixels jumping around within the bands, then the white screen of death and nothing... This happens intermittently and usually restarts OK. Happened again three days ago and wouldn't restart for two days (again the bands/pixels etc) but now operating fine? Any ideas whats wrong with my iMac and what the solution may be? Also gets very hot from time to time, particularly if I'm playing music/watching youtube/movies for extended periods. Mac is 3.5 years old, running OS X 10.6.8, processor 3.4 GHz i7 memory 8GB 1333 MHz DDR3

If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. Use 2nd link if not near an Apple Store or aren’t in the US.
Genius Bar Reservation US
Authorized Service Provider

HT4061 can I connect my iphone to my dad's imac and download my pictures to his machine without any issues?

can I connect my iphone to my dad's imac and download my pictures to his machine without any issues?

AnaMusic wrote:
By Design you can only Sync the phone to One iTunes Library at a time...
Syncing & importing pics/videos in the camera roll are two entirely different things & have nothing to do with each other.
You can import iPhone camera roll photos/videos using any computer you want...this has nothing to do with iTunes or syncing.

IMac and Mouse A1152 - rapid clicking noise? Grounding issue?

June 2008
After browsing though all the posts on this board I cannot find an answer to the following question:
I have a new iMac and every day, after several hours of use the mouse makes a rapid clicking noise when I barely touch it. After trying it with another mouse (also a A1152) the same noise appears. This happens in different applications (i.e. Safari, Firefox) and I lose control of the programs as it sends series of unwanted rapid mouse clicks (cursor movements still work fine). If I restart the computer it will work fine for several hours. It also does not depend on the mouse pad (tried it with several) It almost appears as if the mouse sensitivity greatly increases after several hours of work. I read on another site this may be a grounding issue but can't find more info about this.
Any idea/suggestion how to solve this is welcome.

I had the same thing happening .. it is cause something is jammed in the mouse and makes the .. thing pop open where you can select what window to activate?? (pressing the 2 buttons on the side of the mouse) i think
Once I tried to crack open the mouse, but failed ( I got to open only the lower side of the mouse) and once I put it back together it was all ok ... I don't know...

Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

Take each of the following steps that you haven't already tried.
1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
2. From the menu bar, select
 ▹ System Preferences ▹ Sound ▹ Output
Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
5. Reset the NVRAM.
6. Reset the SMC.
7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
8. Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.

IP Issues on i7 iMac and Aiport Station

Similar Messages

Maybe you are looking for