IP/IVR 4.5 CRS Client Editor Error message Engine host name list is empty

When the reactive script is being clicked on the client
version of CRS editor it is returning an error "Engine host name list is
empty check the LDAP enabled CRS for engines" in the debugging pane ,But i
dont face any issues when i'm doing the same on the server. KIndly help me
out to fix this issue
note : version of ipivr is 4.5 and i am facing this issue when i execute on the client machine and i have attached a screen shot along with this

Thanks for the response.
1 . I am able to ping the crs server from the client machine by host anme as well as it's ip address.
2. yes i am able to ping the client from the server
3. i get the same error message when using IP address to log into the CRS Editor.
note :
1. i face the same issue when i try it out on another client on the same network
2. since i was facing this issue i tried to install the SR2 and check it out but still i am facing the same issue
3. there is no firewall in the CRS server or in the client machine where the CRS editor is installed

Similar Messages

  • My ipad receives email with the hotel wifi but will not send.  The error message is "user name or password for ........is incorrect" but both are correct and unchanged.  Restarting iPad didnt help.

    My iPad receives email on the hotel wifi but will not send.  The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged.  Restarting iPad did not help.

    I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message.  I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message.  Is there some trick to this?  Very frustrating!

  • TS3899 Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect

    Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect". Help

    Hotmail is having problems:
    http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
    http://www.engadget.com/2013/08/14/outlook-outage/
    http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
    http://mashable.com/2013/08/14/outlook-down/
    http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

  • Error message MH 175 "The listing end is not allowed to be in the past"

    Hi,
            While I try to execute listing in the new article creation using particular disctribution chain, i.e. with reference to a Sales Org and distribution channel, the error message MH 175, 'The listing end is not allowed to be in the past' popped up. Can you please help me on what could be the cause for this error to be displayed.
    thank you
    regards
    prahlad

    Hi,
       Go to mm42.. enter the article number and distribution chain and then select the Listing View.... Please check the "Listed to" and "for Sale till" date is in past. if so change the date to future and try agian.
    Regards
    GK

  • When I try to open a document created in Pages, I get an error message saying "[Document Name" can't be opened."  I don't want to lose hours of work; has anyone else encountered this?

    When I try to open a document created in Pages, I get an error message saying "[Document Name" can't be opened."  I don't want to lose hours of work; has anyone else encountered this?

    A few general trouble shooting tips that may apply here:
    1. If you used Software Update to do the OS update(s) to reach 10.6.7, go to http://support.apple.com/downloads/ and download and apply the Mac OS v10.6.7 Combo Updater. The Combo Updater contains some fixes that were not included in the incremental updaters used by Software Update.
    1a. Check that you have the current version of Pages (and of the other iWork applications) installed. All three applications' current version numbers end in .0.5
    2. A common cause of malfunctioning applications is a corrupted preferences file (.plist file). Your Pages '09's plist is at yourname > Library > Preferences > com.apple.iWork.pages.plist
    Quit Pages, locate the file and Drag it to the Desktop (or to the Trash).
    Restart Pages and attempt to open one of the files.
    If all is well, Trash the plist file and empty the Trash.
    If there's no change, AND you've made changes to the Preferences that you wish to keep, drag the file back to its previous location, replacing any new one that has been created.
    Regards,
    Barry

  • I cannot open files in excel with error message "The file name or path contains invalid characters

    I cannot open files in excel with error message "The file name or path contains invalid characters

    Found the solution. The hardrive name was changed to "/" which is not a recognised file path character. So I changed the name to "Mac" then I was able to already open all files in excel and word

  • Network Error []: Cannot Get Host Name when running business rules

    Guru's
    We are getting the following error intermittently when we are running business rules (Planning Application >>Tools>>Business Rules) or running SmartView refreshes:
    Network error []: Cannot Get Host Name
    The following is then logged in the Essbase Application logs:
    Local/Application/Database/admin@Native Directory/Error(1042022)
    Network error []: Cannot Get Host Name.
    A quick look at the Essbase Error Messages Doc says it is a network error and we have to consult the network documentation. Unfortunately this is not very descriptive so we logged an SR with Oracle but we don't seem to be getting a resolution.
    The environment is 11.1.2.0 and the architecture is as follows:
    Server 1 - MS Server 2008 x64:
    Planning, Calc Manager, Foundation Services, Framework Web Services, EAS, APS, Web Analysis, FR Web Services
    Server 2 - MS Server 2008 x64:
    Essbase Server
    Server 3 - MS Server 2008 x64:
    Framework Services, FR Print Services
    We have tried doing the following:
    1. Put in the server host names into the hosts file on the Hyperion Servers
    2.  Applied the following TCP/IP settings on all the Hyperion Servers and one of the user machines as a test:
          - Added a new DWORD Value named TcpTimedWaitDelay and set it to 30.
         - Added a new DWORD Value named MaxUserPort and set it to 65534.
         - Added a new DWORD Value named MaxFreeTcbs and set it to 6250
    3. Confirmed that there are no packet drops by monitoring the server NICs so no packet loss could be the cause of this issue
    4. The Essbase Config file has the following settings:
    NETDELAY 2000
    NETRETRYCOUNT 2500
    Has anyone come across this issue and if you managed to resolve it, how did you go about it.
    Thanx

    Hi Rahul
    The issue is happening to a number of calcs so it it not one calc specifically. I will ask the functional consultants to enhance the logging in the business rules so that we can see if the issue happens on a specific member\block etc and yes we do use Xrefs
    We can run this as a calc in EAS without any issues and it's intermittent because this business rule runs 95% of the time in Planning Application >> Tools >>Business Rules without any issues.
    Thanks

  • Error:Set by Host Name:CRMDEV;Transaction:R3AS:SMOF_DOWNLOAD

    Hi Folks,
    I am trying to replicate BP  from CRM to R/3.All the Mappings from CRM to R/3 are already maintained.Also I have created the subscriptions and publications for R/3 in Admin Console.All the RFC Connections are working correctly. When I checked the SMQ1 in CRM I got the following error:
    Set by Host Name: CRMDEV;Transaction R3AS:Report:SMOF_DOWNLOAD.
    Can anyone guide me how to solve this issue?
    Thanks.
    Sudhan

    Hi All,
    Solved this issue myself.
    Basically no need to worry about this queue message.
    1) I done set the filter for EQUIPMENT in t-code R3AC1
    2) Customer Relationship Management --> Master Data --> Installed Base --> Replication of technical objects from SAP ERP --> define default setting for Replication or equipment.
    Site name - ERP logical system name
    IBase Category - EQ
    Obj.Family - 0401
    Category ID - MAT_Z401 (Important note is this category is created under R3PRODSTYP hierarchy, under MAT_ category). Equipments in ERP also should create using this Category, then only the equipments will be downloaded)
    Delta down load checked
    3) Go to R3AS and select load object as EQUIPMENT and start
    4) you can see the IBASE in CRM using IB53 or using the webUI search.
    Thank you and Regards,
    Niranjan

  • PC Suite 6.84 - error message 1078 - duplicate nam...

    Having installed OC Suite, it will not complete connection with my Nokia 6300. It finds the phonem but cannot complete the installation of the hardware.
    The error message is "The name is already in use as eitehr a servcie name or servcie display name".
    I realsie that thgis is a Windows error mesage (number 1078), but has anyone else got this and how is it cured?
    I run:
    Windows XP Home with SP2
    PC Suite 6.84
    Connection via cable
    I also have Microsoft ActiveSync installed on the PC (version 4.5 = latest version). If all else fails, can I use this to connect my phone to the PC?
    All urgent advice welcome - I have spent over 3 days on this and still got no answers.
    Thanks in advance

    Thanks for this.
    These are the steps I had tried coutless times over the last three days or so - always came back to the same problem.
    I have now found the solution, and got my phone installed, but no thanks to Nokia Technical Support - it was due to a post on a message board at
    /discussions/board/message?board.id=pcsuite&message.id=16290#Ma61290.
    Basically, the Nokia Uninstall software (or the PC Suite cleaner software) does not go far enough. In particular, it needs to delete any keys in the Registry under Local_Machine\System\CurrentControlSet\services that include nmwcd in their name - there were 4 in my Registry. These relate to the USB drivers for the generic phone, phone parent and modem. Curently, these have to be deleted manually.
    Without these deleted, Windows rightly thinks that the phone alreday exists, because these Registry keys say it is. This is not a Windows problem (as the Nokia Tech Support people via Nokia Customer Care UK insisted to me twice), it is a Nokia problem. Their uninstall/cleaner software is not good enough when you have to install a new version of PC Suite and it needs sorting PDQ, as I and loads of others (as is evident from the message boards) have the same problem.
    neil

  • When checking email I now get an error message saying User name or password is incorrect...

    When checking email I now get an error message saying User name or password is incorrect...  Went to AT&T store and they didn't have a clue how to fix it...
    I'm sure this question has been asked, but can someone point me in the right direction? 

    I am also having the same problem and I did go on my computer and change the password and my iPad still gives error message. Yes wish someone could help.

  • My iphone suddenly crashed and asked for restoration, however itunes sends error message of host not available, what should I do?

    My iphone suddenly crashed and asked for restoration, however itunes sends error message of host not available (3014), what should I do?

    Try -
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    Also see:
    3014
    Restoration of code 3014 will not work?: Apple Support Communities

  • Why did I get an error message; installer: Package name is Adobe reader XI (11.0.10) installer: Certificate used to sign package is not trusted. Use -allowUntrusted to override?

    why did I get an error message; installer: Package name is Adobe reader XI (11.0.10) installer: Certificate used to sign package is not trusted. Use -allowUntrusted to override?

    Hi sgtwalker1226,
    For Which operating system are you downloading the installer?
    Regards,
    Rahul

  • Client Side Error Message in Notification Region

    Hi,
    Is there any way I can display my client side validation in NOTIFICATION region.
    My Scenario,
    In my application, I have dynamic Apex Items (Generating Using APEX_ITEM API).
    I have added client side validation (Javascript) when users clicks the button and I am showing my error message in alert window. (which is working fine). But now my customer wants to display the error message in Notification region instead of ALERT message.
    Can anyone help me to solve this issue. Thanks in Advance..
    Regards
    Balaji S

    Hi
    Yup, just create a div in the page template in the right place to hold your messages and give it an id like...
    <div id="noteArea"></div>Now in you javascript, rather than using alerts, you can use
    var noteObj = document.getElementById('noteArea');
    noteObj.innerHTML = 'my message with any HTML needed';Is this what you mean?
    Cheers
    Ben

  • Client side ERROR MESSAGE THROWN TWICE

    Hi,
    In our application we are having a af:inputText component, which has a client side validation. When the validation fails the intended error message is thrown twice on the screen. Below is the component code snippet,
    <af:inputText label="#{inventoryUIBundle.RANGE_TO}" autoSubmit="true"
    rendered="#{pageFlowScope.TelephoneNumberEditBean.addMode}" columns="20"
    maximumLength="#{pageFlowScope.TelephoneNumberEditBean.maxLength}"
    value="#{pageFlowScope.TelephoneNumberEditBean.maskedRangeTo}"
    binding="#{backingBeanScope.rangeToComponent}"
    id="number-rangeto">
    <af:validateRegExp pattern="[\\d\\s\\*\\#\\+\\-\\.\\,\\(\\)\\\\\/]+" messageDetailNoMatch="Only number, space and special character - + ( ) . , / \ * # are allowed."/>
    </af:inputText>
    Can any one provide any clue as to why this is happening.
    regards,
    Chandra.

    Another location where I have this issue,
    <af:inputText value="#{pageFlowScope.PlaceEditBean.entityObject.vertical}"
    label="#{inventoryUIBundle.VERTICAL}"
    maximumLength="25" autoSubmit="true"
    id="place1-vertical" partialTriggers="place1-latitude place1-longitude"
    binding="#{backingBeanScope.verBinding}"
    valueChangeListener="#{pageFlowScope.PlaceEditBean.onChangeVnH}">
    <af:validateRegExp pattern="(-)?(\\d){1,10}\\.(\\d){1,10}" messageDetailNoMatch="Only decimal numbers are allowed for vertical."/>
    </af:inputText>
    In the above tag set, there is a ValueChangeListener. This also has a double message issue.
    regards,
    Chandra.

  • Com.apple.DotMacSync.client.exe error message

    Error message "com.apple.DotMacSync.client.exe" keeps being displayed.  Message content reads "The procedure obj_exception_try_enter could not be located in the dynamic link library".  I have installed the latest iTunes

    Hi Turingtest2!
    You seem to be the go-to guy with these types of errors. I'm quite impressed by your thoroughness! My error began showing up a few weeks ago when I updated iTunes to 11.1.5.5. The error doesn't seem to get in the way of iTunes working, or my syncing Windows XP / iPhone, but this error message pops up every 10 minutes or so with a loud "don't do that!" noise, which is mildly irritating and I'd love for it to go away.
    Error: com.apple.DotMacSync.client.exe Entry Point Not Found. X  The procedure entry point objc_exception_try_enter could not be located in the dynamic link library obj.dll
    This seems to be a bit different from other users, but perhaps the same response - to uninstall your list of programs and reinstall iTunes is the best strategy?
    Thanks Turingtest2 - like your photo by the way.
    Renee (somewhat lost in rural Minnesota...)

Maybe you are looking for