Ip_local_port_range - what are the right range

Hi all,
we got a little 'problem'
Currently the range for the dynamic TCP/IP port allocation in our FlexFrame LINUX systems is from 9000 to 65500 (LINUX kernel parameter ip_local_port_range). That means, the pre-defined ports for sapstartsrv (5<inst>13 and 5<inst>14) could possibly be in use by other SAP processes. In that case the following error message in sapstartsrv.log is "soap_bind failed, Webservice thread enters retry loop".
and now I ask myself ... do I have to ignore that or should I define an other range for the ports ? From my point of view I think I cannot tighten the range because I do not know if there is any SAP service in my environment which get problems with a modified range.
I read that Oracle request the range from 9000 to 65000. We use DB2 as database for our SAP services. But I think even with DB2 I'm not able to tighten my range.
Any idea to me how I can get rid of my issue ?
Kind regards
Karlheinz Heger

I feel you can change the port range from 52000 to 61000 as this port range is assigned for client applications to connect to a server on a dedicated port .
Check by changing the range . If that works it should be fine, as you will not have 9000 client applications connecting to a sever from the system .

Similar Messages

What are the right names for the 2 OHS?

Hi,
Currently we have 2 options for an HTTP Web Server for APEX:
- An Oracle HTTP Server (OHS) from the database companion CD.
- An Oracle HTTP Server (OHS) from the Oracle Application Server.
The first OHS is based on Apache 1.3.x and the second on Apache 2.0.x.
What are the right way to reference them so people know what your are talking about? In the manuals they are just called OHS but since they are not the same I would like to distinguish them some way. What do you call them?
Regards Pete

OK now I think got it:
OHS from the database companion CD and from the Application Server are both based on an Apache 1.3.x HTTP server.
On the Oracle Application Server companion CD is an OHS based on an Apache 2.0.x HTTP server. This release does not contain the mod_plsql module an can therefor not be used for APEX.
Regards Pete

What are the right content conversion parameter in this receiver ?

Hi experts,
Can someone help me with setting right Content conversion parameter in the Receiver of File adpater(FCC).The output file must be fixed length text file.
Here is the receiver structure:
<Recordset>
    <Header>
       <f1>01</f1>
       <f2> </f2>
       <f3> </f3>
    </Header>
     <Body>
        <SubBody1>
              <field1 />
              <field2 />
              <field3 />
              <field4 />
              <field5 />
        </SubBody1>
         <SubBody2>
              <field6 />
              <field7 />
              <field8 />
              <field9 />
              <field10/>
        </SubBody2>
     </Body>
    <Trailer>
        <f1>03</f1>
        <f2> </f2>
        <f3> </f3>
   </Trailer>
</Recordset>
Also Body can occure multiple times in the file but still will have this structure...Header and Trailer can occure only once in file.
What are the right content conversion perameters in this case?
Appreciate your help asap!T
Thanks
Jon

<Recordset>
    <Header>
       <f1>01</f1>
       <f2> </f2>
       <f3> </f3>
    </Header>
     <Body>
         <SubBody>
              <field1 />
              <field2 />
          </SubBody>
          <SubBody>
              <field1 />
              <field2 />
          </SubBody>
          <SubBody>
              <field1 />
              <field2 />
          </SubBody>
        </Body>
    <Trailer>
        <f1>03</f1>
        <f2> </f2>
        <f3> </f3>
   </Trailer>
</Recordset>
if this is the input structure then FCC goes like this ....
Recordset:Header,Body,SubBody,Trailer
Header.fieldFixedLengths 10,20,30.. (based on you are structure fixed lengths)
Header.endSeparator - 'nl'
SubBody.fieldFixedLengths 10,20,20 (based on you are structure fixed lengths)
Body.endSeparator - 'nl'
Trailer.fieldFixedLengths 10,20,30.(based on you are structure fixed lengths)
Trailer.endSeparator - 'nl'
We might have to try out SubBody.endSeparator - 'nl' if Body.endSeparator - 'nl' does not insert a new line after each body record.
Cheer's

What are the right steps to move iTunes 11 library from external HD to internal HD?

I have poked around the support communities and tried several times to move the iTunes library (currently on an external HD) to my internal HD.
I've tried
- pointing my library to my new internal HD location
- checking "keep iTunes library organized"
- checking "copy files to iTunes media folder while adding"
- consolidating all files
- exporting library
No dice.
I also tried
- clicking create "new library"
- physically copying (drag and drop) my iTunes subfolders to the new iTunes folder...
- now I've got several duplicates
Clearly I should not become a Genius at the Genius Bar. Please suggest the best process/steps to get er done! I've kept my original iTunes folder nice and safe. So I can go back to ground zero and do it right.
Thanks

What exactly do you have on the external drive? A library is more than just media files.
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to choose a library, then select the copied iTunes folder.
If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847 - plus supplemental information about organizing to new structure https://discussions.apple.com/message/26404702#26404702
Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/docs/DOC-7392 - and making an iTunes library portable.

What are the right DNS records to host more than one site on OSX Server (ML). My conf in Server.app looks right but one of my sites lands on the default server. Any suggestion?

I started using OSX Server on Mountain Lion a few days ago and it looks promising.
I do however measure my ignorance in DNS matters...
I defined two websites in addition to the the Default Server, so I have three names to deal with.
For argument's sake
- www.main.com is the default site
- www.sitea.com is the first site
- www.siteb.com is the second site
I define a virtual host for www.sitea.com and another for www.siteb.com
The resulting apache conf is what I would expect, I am pretty sure it is correct.
So I modified my DNS entries (they were A records) to point to my new OSX Server.
My result is:
- www.main.com shows the default site
- www.sitea.com shows the first site
- www.siteb.com shows...the default site
Any ideas?
Cheers

Thanks MrHoffman!
My problem ended up being a name but not in the DNS!...In Apache.
Your information allowed me to rule out possibilities and zoom in to the culprit faster.
I just report here the conclusion hoping it can help someone else.
When I installed OSX Server last week, I had in mind to principally run siteb.
During the initial install, this is what I must have entered and then forgot about it.
Then I defined my virtual hosts sitea and siteb and realised my machine was called siteb and changed its name to main to avaid a name collision. At which time I remember OSX Server telling me that changing the name could have consequences...But it apparently went ok, and it did except for one little thing.
The consequence was this:
in the main configuration file /Library/Server/Web/Config/apache2/http_server_app.conf the ServerName directive had remained siteb (instead of main). I manually updated it with TextEdit (could do vi from bash, its the same) and replaced siteb with main.
There is a way to detect it.
In Server.app, there is a "logs" panel, which displays all sorts of logs for everything including the websites.
Each website's logs are presented as "access" and "error" logs. The information was there, but I could not see it because the viewing window in remarkably small for so much information in raw text...
web logs are actually written to only two files in /var/log/apache2 (error.log and access.log)
I openned two bash windows and run tail -f on error.log in one and tail -f access.log in the other.
When I started the web service, apache threw a warning stating from mod_ssl saying that the certificate did not match the serve name...I the certificate was what I expected, I checked http_server_app.conf and found the ServerName directive that was not changed when I renamed my server...
Easily fixed when its found, but it can take a while to find.
BTW, I was using A DNS records for and it works, but I find your method of using CNAME records documents the administrator's intent better than with A records; I started to do the same. (A records a useful though, they can run a domain across multiple machines)
Cheers mate!

What are the right Color Settings and Proof Setup in Photoshop if you design for the web?

This question has come up numerous times, but I still haven't seen a satisfying, final answer. I would like to make sure that what I'm designing in Photoshop in regards to colors, saturation and brightness will be as close as possible as what I'm going to see in my Safari browser once that same page has been developed.
I understand there are going to be differences between monitors and browsers, but if I just could get an almost one to one translation in regards to color/saturation/brightness from my Photoshop file to that same developed HTML page in Safari that would be ideal.
Currently I set my Color Settings to Monitor RGB - Display and my Proof Setup to Monitor RGB. Not sure if these settings are correct.
Curious to hear your thoughts and advice.
Thanks,
-Tony

if AdobeRGB is the more professional working space, then why not use that profile?
on the web (and in unmanaged and broken work flows) sRGB is the safest profile (source space)
just open your tagged Adobe RGB and tagged ProPhoto RGB document (use the embedded profile in each document)
and go to View> Proof Setup: Monitor RGB (notice the loss in saturation? that's how most of the people on the Internet will be viewing your color, assuming you have a standard-gamut monitor like most people)
always CONVERT to sRGB for the World Wide Web
i didn't read your link
anyone who recommends "disable color management in Photoshop" -- set Working RGB to "Monitor RGB" -- AND MOST UNBELIEVABLY -- "Don't color manage this document" (ignore embedded profiles) ------ is pretty mixed up (in my opinion)
i will recommend reading JEFF SCHEWE and BRUCE FRASER for professional color management information

HT2534 These instructions are no working in iStore Canada, what are the right instructions for this country?

Following http://support.apple.com/kb/HT2534?viewlocale=en_CA&locale=en_CA
These instructions are not working in iStore Canada, there is no NONE payment option.
It does work in iStore Mexico tho... I created an account there and added the NONE method but if I try to switch my country to Canada it asks me for a card again.
Now I have a gift code from a friend in Canada that I cannot claim because iStore Mexico says I can only claim it in iStore Canada and I am not able to switch country without a credit card.
PS: I do live in Canada and have a canadian card but I have no intention to input my card number even if they don't charge me.
Thank you!!

Thank you!
Here is what I did:
Log off and restart iTunes.
Logged it with the account I opened for Mexico.
Changed my account region to Canada.
This started the account open section for Canada.
Now I followed the registration process again and found it loaded my mexican account information including the NONE option.
I fixed the address to Canad and finished.
My account got configured and I managed to redeem my gift.
Thank you!

VMI and reduce Stock in Transit - what are the right methods?

Hi Gurus,
We are using APO system to implement VMI functionality to replenish stock at customer location. We need to build stock in transit at customer location after PGI happens in ECC.
Now, stock in transit is show up in 'Stock in transit' key figure, but the question is how to reduce stock in transit once it is received at customer location.
SAP recommends following four methods to reduce:
http://help.sap.com/saphelp_scm2007/helpdata/en/f1/f69a3dcbcfac53e10000000a114084/frameset.htm
1. Goods receipt information is not sent from the customer to the vendor
2. The open purchase order quantity is sent from the customer to the vendor
3. A proof of delivery is sent from the customer
4. The stock in transit quantity is sent from the customer to the vendor
Out of these 1 and 2 methods are feasible in our scenario.
Please share your experience if you have used any of these methods, I want to hear from someone who implemented any of these methods before deciding on a method.
Thanks in advance,
Niranjan

Dear Niranjan,
I have implemented SCM-APO VMI using Past Releases of SCM (version 4.1) for upto 300 Customer Sites & 500-1000 Products.
In my experience ... this is a Big Custom Development using EDI - IDOCs / ALE wherein you Receive from Customer the Data either as "Open Orders" or "Goods Receipt" of VMI Order at Customer Store or "In-transits" as they view it. There is a Facility to receive them in the PROACT IDOC but you have to write IDOC FUnction Modules to post the Data to the
VMI Planning Area as well as at Product-Location you have to Daily Delete the In-transit Order (Category EI or AH for ASN) and Upload Intransit Quantity directly into Live-Cache as a Order. The Development is also complex as you need to Map the VMI Customer Product to the Vendor/Manufacturer's Product COdes in SCM-APO.
I have experience implementing VMI like this several years ago ... and I am not sure if SAP SCM-APO built anything Standard for the Interface over the years. If you are not sure get a ALE/IDOC & ABAP Consultant or XI Consultant to work with you on the Project.
You can Delete In-transit Quantities by using RLCDEL Transaction for Category EI or AH (if ASNs are used). You need a IDOC/ALE Development to Calculate and Upload In-Transits and Update into the VMI Planning Area as well as Download to a FILE which you can use via another ABAP Development to Upload In-transits at the Product-Location (Customer) in SCM-APO.
Hope this helps.
Regards,
Ambrish Mathur

What is a good defragmenting software for the mac, and what is the price ranges if there are mutiple ones?

I have had my mac for about a 1 year 5 months, coming onto 6 months. And I want to keep it running in top shape, or as close as it can get. I Am just wondering what is are good softwares for defragmenting a Macbook and what are the price ranges, and what are the recommendations. Which would you rate from best to worst in other words.

First Mac OS X doesn't need defragged. If your harddrive is ~80% full heavy downloading could hurt disk performance but I'd say you're in the clear. If Apple considered defragging a necessity they would have included it into Disk Utility.

What are the best tools to test why Mac Pro is so slow?

Hi,
I have a 2 x 2.4 GHz quad core intel xeon with 6 GB 1066 MHz DDR3 RAM. 2 x 1 TB Western Digital disks (WDC WD1001FALS-41Y6A1 (boot disk- 50% disk free) and WDC WD1002FAEX-00Y9A0).
I am often surprised at how slow the machine works. Especially when coming out of sleep mode, where the machine could take minutes just to show the login prompt.
Yes, I do keep more than a few processes running all the time, but am I expecting too much? After all it's got some reasonable horsepower. When I check task manager its usually the Chrome renderers that are hogging up a core (or two) but there are still many cores left (at least according to istat menus).
Anyway, I'm wondering what are the right tools to diagnosing the situation and how to improve it.
I've started off with disk utility and everything seems fine.
Can someone please recommend my next steps?   Are there any freeware utilities?
thanks
moosya

Use this article to examine your Memory. You can take a screen shot (Command-Shft-4 and drag across the area to be captured) and post it using the little camera icon on the top of the reply window on the forums. Or answer these questions:
How much total RAM.
How much of the pie chart is Green?
How much is Green + Blue?
How many Pageouts since last Startup?
How much Swap Used?
Using Activity Monitor to read System Memory and determine how much RAM is being used

Which Patches are the right ones?

Hi,
we are currently using Forms 4.5, but want to upgrade to 6.0 or 6i. I currently browsed through the available patches for the products on Metalink, but I found it quite confusing.
Do I need the patches for Apps11i?
What are the right patches for Dev6.0 because the newest one (set 5a) seems not the last one to aplly (set 6a)?
Can anybody help to clarify the situation?
Thanks in advance
--Thomas

You can find them on Oracle's FTP site
ftp://oracle-ftp.oracle.com/dev_tools/patchsets/dev2k/Win95NT/6.0/
You can try (for 6i):
ftp://oracle-ftp.oracle.com/dev_tools/patchsets/dev2k/Win95NT/6i/patch1/
but I wonder why you need patches before installing the product and experience troubles?
Joseph Schwertner
P.S. Meine beste Glueckswuensche! In welche Stadt arbeiten Sie in Deutschland? Erfolg!
Josef
null

What's the right version of codes for this hybrid 6509?

I have a 6509 running CatOS on the Sup720 and IOS on the MSFC. I''ll be putting in a 2nd Sup720 as the standby, but not sure what are the right version of codes to load. Here is the hardware info and the Cisco release notes I found:
Active Sup: SUP720-BASE with PFC3A. Cisco recommends 8.3.3, minimum 8.1.1.
Standby Sup: SUP720-3B with PFC3B. Cisco recommends 8.4.2, minimum 8.3.7.
6548-GE-TX: Cisco recommends 7.6.9, minimum 7.6.1.
6516A-GBIC: Cisco recommends 7.6.9, minimum 7.5.1.
Thanks for any help.
Gary

This is not a supported Redundancy configuration:
Understanding How Supervisor Engine Redundancy Works
Note The redundant supervisor engines must be of the same type with the same model feature card. The WS-X6K-SUP1-2GE and the WS-X6K-SUP1A-2GE (both without PFCs) are compatible for redundancy. For supervisor engines with PFCs, the PFCs must be identical for redundancy (two PFCs, two PFC2s, two PFC3As, two PFC3Bs, or two PFC3BXLs).
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_4/confg_gd/redund.htm#wp1079325

ThreadOpt values - is it possible to set them and what are the ranges?

Hi there,
I have a problem on my TestStand 4.2 platform, with test step result, formed and received from called external sequences results. In my Main sequence, in Post-Expression I defined condition, according to which the "Step.Result.Status" is passed or failed, and it works. But the problem is that in Status Expression field there is following statement: "(Step.Result.Status == "Done" && (Step.TS.SData.ThreadOpt == 0 || Step.TS.SData.ThreadOpt == 3)) ? "Passed" : Step.Result.Status". After deep search in the user manual, I found that (Note from "Expression Tab - Step Properties Dialog Box"): "Certain types of steps, such as Numeric Limit Tests, Multiple Numeric Limit Tests, String Value Tests, Pass/Fail Tests, and Statement steps, reserve one or more of these expressions to perform operations specific to the type of step or a substep performs the operation. In these cases, you cannot use the expressions the step type reserves, which appear dimmed on the tab."
Now, my problem is that at this specific step I call to an external sequence, which returns results and it is correct, but if these results, compared to expected are not the same, my step in the main sequence fails. Which is OK. But when the final report is generated I see there "Number of Tests Failed: 0", which is not OK. Since I can't change the "Step.Result.Status == Done", which comes from the external sequence, I thought that may be there is a place to change the "Step.TS.SData.ThreadOpt" and this way to cause to main sequence to correctly report "Failed Tests <> 0"???
Does anyone has an idea whether it is possible to set this the ThreadOpt value and what is the accepted range?
Your feedbacks and inputs are highly appreciated.
Stephan

GSinMN wrote:
Hello Doug,
I didn't think I was modifying any hidden properties. It's just configuring a sequence call step when you add it to the sequence. The "Execution Options" are clearly shown in a dropdown menu on the Module tab. I was just pointing out that this seems to be what sets the ThreadOpt variable.
GSinMN
Maybe I misunderstood. When you said "My normal process is to set it to 1, but based on this info, it needs to be either set to None or Use Remote Computer if you want anything other than "Done" to be returned." I thought you meant that you were setting the property directly rather than setting your sequence call steps to "New Thread" with the combobox.
-Doug

Hi all! What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

Buying more hard drive space is a very valid option, here. Editing takes up lots of room, you should never discount the idea of adding more when you need it.
Another possibility is exporting to MXF OP1a using the AVC-I codec. It's not lossless, but it is Master quality. Plus the file size is a LOT smaller, so it may suit your needs.

What are the ranges for correct skin tones using RGB%?

What are the ranges for correct skin tones using RGB%? Used to using a scale from 0 to 255. But with LR it's RGB , I know 100% RGB is white. What do you use for %?

While I whole heartedly agree that we should not be constrained to hard and fast numbers for accurate skin tones ... LR does offer an RGB color readout ... I am assuming they made those percentages available for the user to monitor the breakdown of specific color values for a reason ... so we could have an indication of how a specific color in an image will be reproduced ...
I liken this to using a speedometer ... while many experienced drivers in well tuned vehicles can travel on the highway at the prescribed legal speed limit without really monitoring the readout on the dashboard ... however, there are times when they would like to verify the speed at which they are traveling ... the RGB color percentage readout in LR is no different ... just a source of information to verify you are achieving what you desire ...
Again, going by specific numbers in this instance, I believe, could lead to problems ... there may be times when you may desire or actually need to adjust skin tones ... even though a pleasing WB has been achieved ... the relationship of R, G and B can be used to get you there.
From what I have researched and put into practice with LR the following seems to be a good starting point and the data was borrowed from "the pixelation" blog:
R: highest %
G: middle %
B: lowest %
To get a little more specific. In general,
R: Y + (15-20)
G: average of R and B
B: R – (15-20)
For example, the following values represent common Caucasian skin tones using the rules above:
* R: 80%; G: 70%; B: 60%. R is 20 points higher than B, and G is midway between R and B. That’s perfect.
* R: 86%, G: 78%; B: 70% also reflects a nicely balanced skin tone. Again, G is midway between R and B, and R is 16 points higher than B. This, too, illustrates a great relationship among the colors.

Ip_local_port_range - what are the right range

Similar Messages

Maybe you are looking for