IP migration of RAC server

Hi Friends,
What are the steps i need to perform or take care as oracle DBA if our RAC server's IP is going to migrate from one IP range to other.

Re: DB10g vs changing IP address,hostname and domain name
Link may also be of your interest.
Regards
Girish Sharma

Similar Messages

Migration 10gr2 rac to 11gr2 rac

Hi all,
Can I use Transportable Tablespaces to migrate 10gr2 rac with ASM (solaris) to 11gr2 rac with ASM (AIX), the server is not the same.
regards
Edited by: mexman on 06-may-2010 15:36

mexman wrote:
OK, and can I use Transporting Tablespaces Between Databases 10gr2 to 11gr2 ?Yes.. as mentioned above by Dan , you can use..

Why migrate to RAC

Just to get a taste of RAC I have installed 11gR1, 11gR2 RAC 2-3 times on VMware 2 virtualized environment, I am now ready for actual migrations to RAC but it is not going to be easy. None of databases in our Prod are RAC databases. All databases run on multiprocessor machines which are fairly powerful. Current setup provides some safety from server failure by maintaining a passive server in tandem though OS/hardware mirroring ( I am not quite sure how but oracle is not in picture) .
I want to convince my manager that we should make a move to RAC. What points can be brought up .
In my own opinion any application can benefit RAC if it is to support more users, more sessions (Scalability) . if more batchjobs can be run in parallel then servers can be loaded more heavily. We can use the current redundancy provided by passive servers by making them active nodes and taking benefit of their dormant capacity.
What other benefits are there ? The generic question can be what application will benefit from migration to RAC.
Regards,

Online transaction processing (OLTP) and Internet application environments are characterized by short transactions that cannot be further broken down and, therefore, no speedup can be achieved. However, by deploying greater amounts of resources, a larger volume of transactions can be supported without compromising the response.
Decision support systems (DSS) and parallel query options can attain speedup, as well as scaleup, because they essentially support large tasks without conflicting demands on resources. The parallel query capability within the Oracle database can also be leveraged to decrease overall processing time of long-running queries and to increase the number of such queries that can be run concurrently.- High Availability - because you have many servers ,upgrade Hardware you can upgrade on each node.
- Rolling Upgrade
- load balance
- scalability
- mange database service
etc
http://www.nyoug.org/Presentations/2006/September_NYC_Metro_Meeting/200609Zito_You%20Probably%20DO%20Need%20RAC.pdf
http://en.wikipedia.org/wiki/Oracle_RAC
Good Luck

ADPrep Migration from Windows Server 2003 to 2012 Foundation Server fails with error 0x80004005

Hi all,
Having a problem the forums and Google have been unsuccessful in helping me with. Server is Windows 2003 R2, migrating to Windows Server 2012 foundation. Have tried the AD Migration on the new 2012 Foundation server both as a standalone server
and a domain server member before running the migration. I get the following error:
ADPrep execution failed --> System.ComponentModel.Win32Exception (0x80004005): A device attached to the system is not functioning
I've checked the ADprep logs and have found the following:
[2013/01/22:11:15:01.000]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=abd97102-88dd-4013-a009-0e2c2f967ff6,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[2013/01/22:11:15:01.001]
LDAP API ldap_search_s() finished, return code is 0x0
[2013/01/22:11:15:01.001]
Adprep checked to verify whether operation cn=abd97102-88dd-4013-a009-0e2c2f967ff6,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2013/01/22:11:15:01.001]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=134428a8-0043-48a6-bcda-63310d9ec4dd,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[2013/01/22:11:15:01.001]
LDAP API ldap_search_s() finished, return code is 0x20
[2013/01/22:11:15:01.001]
Adprep verified the state of operation cn=134428a8-0043-48a6-bcda-63310d9ec4dd,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2013/01/22:11:15:01.021]
Adprep was unable to complete because the call back function failed.
[Status/Consequence]
Error message: Unable to access the computer "SERVER.apl.local". The network path was not found.
(0x80070035).
[User Action]
Check the log file ADPrep.log, in the C:\Windows\debug\adprep\logs\20130122111500 directory for more information.
DSID Info:
DSID: 0x1811132a
winerror = 0x1f
NT BUILD: 9200
NT BUILD: 16384
[2013/01/22:11:15:01.021]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20130122111500 directory for more information.
We did have AVAST Antivirus installed on the server but this was removed. Any idea's?
Jason.
Consultant | Nerd | Visionary. http://www.ethertech.com.au/ | http://www.deeperstates.com.au

Hi Biswajit et. al., thanks for your help thus far, it is greatly appreciated...
Unfortunately I had already disabled the NIC's on both hosts. They currently remain disabled. I've just tried turning off IPv6 as well and no luck.
PortQry came back fine (I think) :)
=============================================
Starting portqry.exe -n server.apl.local -e 135 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 135 (epmap service): LISTENING
Using ephemeral source port
Querying Endpoint Mapper Database...
Server's response:
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncalrpc:[dhcpcsvc]
UUID: f1ec59ab-4ca9-4c30-b2d0-54ef1db441b7 Isolation Communication Endpoint
ncalrpc:[LRPC00001d40.00000001]
UUID: f1ec59ab-4ca9-4c30-b2d0-54ef1db441b7 Isolation Communication Endpoint
ncalrpc:[LRPC00001448.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[OLE4EF57D32A0DB45F9A64653468D7C]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000012ac.00000001]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncacn_np:\\\\SERVER[\\pipe\\tapsrv]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncalrpc:[tapsrvlpc]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncalrpc:[unimdmsvc]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncalrpc:[W32TIME_ALT]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncacn_np:\\\\SERVER[\\PIPE\\W32TIME_ALT]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncalrpc:[OLE7C4E3B9B79D8492CBA384F149E08]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncacn_ip_tcp:10.0.0.3[1111]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncalrpc:[DHCPSERVERLPC]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncalrpc:[OLE7C4E3B9B79D8492CBA384F149E08]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncacn_ip_tcp:10.0.0.3[1111]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncalrpc:[DHCPSERVERLPC]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncalrpc:[LRPC00000480.00000001]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncalrpc:[LRPC00000480.00000001]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncalrpc:[LRPC00000480.00000001]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncalrpc:[OLE43978C47C6F54B5499302BAB2F50]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncacn_ip_tcp:10.0.0.3[1090]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncalrpc:[LRPC00001060.00000001]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncacn_np:\\\\SERVER[\\pipe\\WinsPipe]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncalrpc:[OLE43978C47C6F54B5499302BAB2F50]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncacn_ip_tcp:10.0.0.3[1090]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncalrpc:[LRPC00001060.00000001]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncacn_np:\\\\SERVER[\\pipe\\WinsPipe]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncacn_ip_tcp:10.0.0.3[1067]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncalrpc:[LRPC00000d10.00000001]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncacn_ip_tcp:10.0.0.3[1067]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncalrpc:[LRPC00000d10.00000001]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncacn_ip_tcp:10.0.0.3[1067]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncalrpc:[LRPC00000d10.00000001]
UUID: 50abc2a4-574d-40b3-9d66-ee4fd5fba076
ncacn_ip_tcp:10.0.0.3[1048]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[audit]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[securityevent]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[protected_storage]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[dsrole]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[NTDS_LPC]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_http:10.0.0.3[1027]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[audit]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[securityevent]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[dsrole]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[NTDS_LPC]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_http:10.0.0.3[1027]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[audit]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[securityevent]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[dsrole]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[NTDS_LPC]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_http:10.0.0.3[1027]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[audit]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[securityevent]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[protected_storage]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[dsrole]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[NTDS_LPC]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_http:10.0.0.3[1027]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[audit]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[securityevent]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[protected_storage]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[dsrole]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[NTDS_LPC]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[audit]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[securityevent]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[protected_storage]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[dsrole]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[NTDS_LPC]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[audit]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[securityevent]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[protected_storage]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[dsrole]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[NTDS_LPC]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[OLE8B33809919104CE5B44970B01637]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncalrpc:[wzcsvc]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncalrpc:[wzcsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncalrpc:[wzcsvc]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncalrpc:[DNSResolver]
Total endpoints found: 125
==== End of RPC Endpoint Mapper query response ====
portqry.exe -n server.apl.local -e 135 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 389 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 389 (ldap service): LISTENING
Using ephemeral source port
Sending LDAP query to TCP port 389...
LDAP query response:
currentdate: 01/28/2013 14:11:54 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
UDP port 389 (unknown service): LISTENING or FILTERED
Using ephemeral source port
Sending LDAP query to UDP port 389...
LDAP query response:
currentdate: 01/28/2013 14:11:57 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
UDP port 389 is LISTENING
portqry.exe -n server.apl.local -e 389 -p BOTH exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 636 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 636 (ldaps service): LISTENING
portqry.exe -n server.apl.local -e 636 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 3268 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 3268 (msft-gc service): LISTENING
Using ephemeral source port
Sending LDAP query to TCP port 3268...
LDAP query response:
currentdate: 01/28/2013 14:11:57 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
portqry.exe -n server.apl.local -e 3268 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 3269 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 3269 (msft-gc-ssl service): LISTENING
portqry.exe -n server.apl.local -e 3269 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 53 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 53 (domain service): LISTENING
UDP port 53 (domain service): LISTENING
portqry.exe -n server.apl.local -e 53 -p BOTH exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 88 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 88 (kerberos service): LISTENING
UDP port 88 (kerberos service): LISTENING or FILTERED
portqry.exe -n server.apl.local -e 88 -p BOTH exits with return code 0x00000002.
=============================================
Starting portqry.exe -n server.apl.local -e 445 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 445 (microsoft-ds service): LISTENING
portqry.exe -n server.apl.local -e 445 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 137 -p UDP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
UDP port 137 (netbios-ns service): LISTENING or FILTERED
Using ephemeral source port
Attempting NETBIOS adapter status query to UDP port 137...
Server's response: MAC address 000423c733ec
UDP port: LISTENING
portqry.exe -n server.apl.local -e 137 -p UDP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 138 -p UDP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
UDP port 138 (netbios-dgm service): LISTENING or FILTERED
portqry.exe -n server.apl.local -e 138 -p UDP exits with return code 0x00000002.
=============================================
Starting portqry.exe -n server.apl.local -e 139 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 139 (netbios-ssn service): LISTENING
portqry.exe -n server.apl.local -e 139 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 42 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 42 (nameserver service): LISTENING
portqry.exe -n server.apl.local -e 42 -p TCP exits with return code 0x00000000.
Jason.
Consultant | Nerd | Visionary. http://www.ethertech.com.au/ | http://www.deeperstates.com.au

Problems after print server migration to Windows Server 2008 R2

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

Hi all,
New forum member, first time poster. I am at my wits end and have concussion from banging my head on the desk for several days running. Hopefully someone here may be able to help.
Environment
I have recently moved our printing environment from a Windows Server 2003 machine to a new Server 2008 R2 machine in prep for rolling out Windows 7 x64 clients. We have 30-40 printers, majority of which are HP's (M2727's, P4015dn's, CM3530's, P2035's & a CM8060).
My procedure for setting up the printers on the new server involved manually creating each printer and using up-to-date drivers, we wanted to start fresh. The HP's are all using the HP Universal PCL 5 or PCL 6 (61.115.1.10527) x86 & x64 driver. We use Desktop Authority on logon to install the required printers for each client.
Problems
Since everyone is now running through the 2008 R2 server we have had a bunch of intermittent problems pop up all over the place, mostly with our HP printers. When using the PCL6 driver some applications print a page or 10 of garbled gibberish (wingdings etc), so most printers are now using the PCL5 driver. Other applications print the error "PCL XL error" when using PCL6. Sometimes reinstalling the printer on the client machine will resolve these errors, however they tend to resurface.
When we use the PCL5 driver our M2727's intermittently report "Out Of Memory" on the printer display (they are stock with 64M RAM each) - upgrading the RAM may fix this but we never had this problem before on the 2003 server. This problem is not specific to the size of the printed document - it could be a 20 page report or a 2 page excel document. Resetting the printer will generally clear this issue temporarily. This is currently our most annoying/biggest issue.
Some people are having issues printing to a FujiXerox 340A-AP printer - in particular 1 person is able to print fine, where as another prints and the print margin appears to be far too small. After confirming all print margins on the server then reinstalling the printer on the client machine, the problem still persists. We have two FujiXerox printers, the second one is working as intended for 8-10 users with the exact same settings.
Attempted Fixes
These are some of the attempted fixes that I have tried:
Turning it off and on
Upgrading the firmware on the M2727's to resolve garbled printing & out of memory
Upgrading the firmware on the CM3530's to resolve garbled printing
Reinstalling all HP Universal PCL5/PCL6 x86 & x64 drivers on the print server
Ensuring that the 2008 R2 server is 100% up-to-date with MS patches
Backing up all printers on print server, removing the print server role, deleting all printers & drivers, rebooting, reinstalling the print server role and restoring all printers from backup
Upgraded Desktop Authority to the latest version - as this application is in charge of installing the printers on logon
As you can see we are having a lot of problems and nothing seems to make any sense. None of this happened before Windows Server 2008 R2 was brought in to the equation.
If anyone is able to provide any assistance that would be greatly appreciated.
Many thanks,
Hartz.
tldr; our printers are screwed since migrating to Windows Server 2008 R2.

Database startup after reboot of RAC server

Hello,
My config : 2 nodes w2k3 with 15 dbs . Oracle 10.2.0.3
I started to scheduled my rac server reboot so i follow the oracle doc to shutdown properly all db,asm,service,listener,etc...
Today one the server reboot, but some instance doesn't start (only five , and the last five in alphabetic order)
In the log :
db log : nothing just the shutdown
crs_log : the start of the 10 db but nothing for the last five !!
just a trace on one listener service :
StartResource error for ora.sqyora01.LISTENER_1522_SQYORA01.lsnr error code = 1
2010-08-11 02:56:08.000: [ CRSRES][3008]32Start of `ora.sqyora01.LISTENER_1522_SQYORA01.lsnr` on member `sqyora01` failed.
2010-08-11 02:56:08.125: [ CRSRES][3008]32Skip online resource: ora.sqyora01.LISTENER_SQYORA01.lsnr
On windows services : the OracleServiceSID service isn't started.
Any help is welcome to understand this problem.
Thanks.

user4511076 wrote:
IMO : (i am not a great oracle dba, because i have not enough time to spend with, and my collegue need really simple think to do, like startup/shutdown a database, no more investigation)Why startup/shutdown a database? I have databases that work 24x7 and uptimes of over a year. The record so far, has been over 24 months uptime (1st downtime were caused by a powerfailure to the rack cabinet). And for a database instance that runs a number of processes and deals with 100's to 1000's of inserts per second.
it's easier to view that an oracle process take more cpu and so investigate in that database what's appens. Rather than search in my v$sql table to find witch schema doing wrong thinksNot sure what you are trying to say here. Single or multiple database instances do not change how a session looks like, or how SQLs are executed.. and thus not how you troubleshoot problems. Nor does it change resource requirements, or how you address these. But multiple instances do impact resource availability and requires one to split resources amongst instances - the end result of this is less flexibility.
It's easier to affect cpu ressource to a process, rather than configuring it in oraclePlease explain.
It's easier to stop a database rather than "put offline a schema"This is a "silly" statement to make IMO. Why do you want to offline a schema? Availability of applications and data are a critical feature in today's information system landscape. So why argue the complete opposite and say it is now more complex to make something less available?
By the same token, why do you want to offline a database? A down database is even less useful than a downed server - at least you can use the downed server as a doorstop.. ;-)
And if a database crash it only affect one application.Yeah.. and these happens when? Every few minutes? Every hour? Once a day?
This is not a valid argument. Oracle instances very seldom crashes just for the heck of it. Most often it is due to incorrect o/s configuration, problematic hardware, uncertified components, old drivers, etc. Or plain old application abuse of Oracle.
There is the theorical approach and practical one : I'm not alone is that case :
http://oracledoug.com/serendipity/index.php?/archives/1339-The-Reality-Gap-3-A-Single-Instance-per-Server.html
http://www.dba-oracle.com/art_dbazine_server_consolidation.htm
I have never done RDBMS as a theoretical thing. The most dynamic table (ito SQLs against it) I have, grows by more than 450 million rows per day. This is as real world as real world gets. And that is what shapes my experience and opinion. And Burleson and I have never seen eye to eye on a number of subjects - so quoting his views on consolidation does little to persuade me to change my opinion.
have you any ideas where can i found an error message that explain why my database doesn't start ? (like not enough ressource ;-) )Troubleshooting a problem starts with a very basic principle - isolation. Isolate the layer or moving part where the problem occurs. As the other instances are running, it means that the CRS software layer is up and running, that the storage layer is up and running and so on. So the problem should be with the instance that for some reason refuses to start? Confirm this by using sqlplus to start a down instance and looking at what its alert log file says. It should have some kind of pointer to what dependency that has not been met.

Migration from SQL Server 7 to oracle 8.1.7 on windows 2000 professional

Hello All,
I am currently working on Database migration from sql server 7 to oracle 8.1.7.
My setup is as follows:
1. Both the databases (sql server and oracle are on the same machine )
2. My sql server database contains 200 tables and 190 stored procedures, which need to be migrated to oracle.
When i am trying to capture the Source database details, its capturing evry thing but when its mapping at the end ...it says "MAPPING ROLE PUBLIC" and its not proceeding furthur..What do u want me to do ? i waited for approx 1 hr , still its not proceeding....How to resolve this bug ?
Also please suggest me the best methodology for Migrating the stored procedures. allmost all my stored procedures have TEMP Tables implemented in it. Please help me in this...
Also please let me know the Timeframe estimate for this total thing to be done..
Waiting for your reply,
Thanks and Regards
SAI SREENIVAS JEEDIGUNTA

You can user Oracle Migration Workbench to migrate from SQL Server to Oracle.
Here is the link which gives info on software usage and download :
http://otn.oracle.com/tech/migration/workbench/content.html
Chandar

Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
Here's the error log of OMWB:
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
** user language: es
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
** Active Plugin : SQLServer2K
EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007

Duplicate thread
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

After Migrating to project server 2013 some of my Mpp are not opening in project professional

After migrating to project server 2013 from 2010. my some of mpp are not opening in project professional.
project professional taking some time and then showing checkin error. There are no logs on project server to this issue.
but you can see these project in project server 2013 without issue. I have also tried the EditLink function. but result is same project professional not able to open. Check in error.

Hello,
Can you try this:
Open one of those Projects in PWA to edit in the browser
make a slight change (new dummy task etc.)
Save and Publish from the web
Close and check in from the web
Wait for the jobs to complete
Open project professional
try and open the same project again from there
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

ODBC Error when migrating from SQL Server 2008 to SQL Anywhere 12

Hello community,
i have the following requirement:
I need to migrate a Database with some Demo data into a SQL Anywhere 12 Database. The SQL Anywhere 12 Database is part of the SAP BusinessObjects Enterprise XI 3.1 SP7 installation and came with the same as OEM Product.
The Environment looks like the following:
DB1 is a MS SQL Server 2008 R2 64 Bit running on Windows Server 2008 R2 64 Bit.
DB2 is the SAP BusinessObjects Enterprise XI 3.1 SP7 installation with the shipped SQL Anywhere 12 (12.0.1.3873) Database running on SLES 11.3 64 Bit
CL1 is my Windows 7 64 Bit Client where Sybase Central is installed in 64 Bit. On CL1 i have a 64 Bit System ODBC Connection connecting to DB1 successfully.
Basically i followed the following (pretty straight forward) tutorial:
Migrating a SQL Server Database to SQL Anywhere White Paper-Technical: Mobile Enterprise, Database Management iAnywhere …
When i want to test the connection from inside Sybase Central (During the migration process) i receive the following error:
From inside Sybase Central my connection looks as follows:
And from the ODBC Manager the connection looks as follows:
Personally i found is strange that the Sybase ODBC Driver Manager drops the error. I would expect that the MS SQL ODBC Driver Manager pops the error it its related to the ODBC DSN to DB1.
Any ideas?
Thanks and Regards
-Seb.

Hi Sebastian,
The data from the SQL Server database must be migrated to an existing SQL Anywhere database. Could you please tell me where this SQL Anywhere database resides and how are you connecting to it?
The error message is saying that the connection to the SQL Anywhere remote database server is failing, as opposed to the connection to the SQL Server database.

Restore from cold backup (rac server)

Hi All,
Oracle version : 10g
OS : SunOS dixie1 5.10 Generic_118855-36 i86pc i386 i86pc
I am having cold backup of RAC server (2 nodes), I want to restore from cold backup.
The problem is that : when i performed the cold backup using rman at that time Oracle was having 3 ASM diskgroups.But unforunately that disk is no more in use due to some fault.
Now my question is how can i restore from the cold backup as when i'll restore from the cold backup this will ask for the same ASM diskgroups.Even more if i creates the same diskgroup with the same name and same configuration then my doubt is that rman will allow me to restore the same from the cold backup as ASM disk header changed now ?
Thanks,
Vipin

VipinK wrote:
Hi All,
Oracle version : 10g
OS : SunOS dixie1 5.10 Generic_118855-36 i86pc i386 i86pc
I am having cold backup of RAC server (2 nodes), I want to restore from cold backup.
The problem is that : when i performed the cold backup using rman at that time Oracle was having 3 ASM diskgroups.But unforunately that disk is no more in use due to some fault.
Now my question is how can i restore from the cold backup as when i'll restore from the cold backup this will ask for the same ASM diskgroups.Even more if i creates the same diskgroup with the same name and same configuration then my doubt is that rman will allow me to restore the same from the cold backup as ASM disk header changed now ?
Yes.You can do these and restore/recover your database.First you need startup your ASM instance then create your ASM disk groups and do following:
1.Edit pfile and change controlfile location to diskgroup(Consder that +dgr1)
2.Restore controlfile to this disk group using backup of controlfiles(you say that is cold backup)
rman target /
/*Instance need starting up from pfile*/
startup nomount ;
/*then restore controlfile,give full path of controlfile from coldbackup*/
restore controlfile from 'coldbackup_location\coltrolfile';
alter database mount;
catalog start with 'coldbackup_location';
backup as copy database format '+dgr1';
switch database to copy;
alter database open;

Problem with migrating data (SQL Server 2k offline data capture)

Hi there,
I try to migrate a SQL Server 2000 database to Oracle 10g (R2) using offline data capture. I following the online Tutorial “Migrate from Microsoft SQL Server to Oracle Database 10g Using Oracle Migration Workbench” and everything seems OK until “Migrating the tablespaces, users and user tables to the destination database” http://www.oracle.com/technology/obe/10gr2_db_vmware/develop/omwb/omwb.htm#t5. I have two errors on 2 (out of 85 ) tables saying “ Failed to create default for Table :
ORA-00907: missing right parenthesis”. I checked the column/table names and they seems OK. I don’t understand why I got these errors. However, when I checked the ‘SA’ Schema in Oracle Enterprise Manager Console, I can see all the tables (including the two problem ones).
I then carry on to the next step and tried to migrate data to the destination database (http://www.oracle.com/technology/obe/10gr2_db_vmware/develop/omwb/omwb.htm#t6) I am now stuck on step 5. “…copy the files from c:\omwb\data_files to the c:\omwb\Omwb\sqlloader_scripts\SQLServer2K\<timestamp>\Oracle directory…” I cannot find the ‘c:\omwb\data_files’ directory, in fact, I don’t have a directory called ‘data_files’ on my machine. I noticed the ‘c:\omwb\Omwb\sqlloader_scripts\SQLServer2K\<timestamp>\Oracle’ directory contains the all the 85 [tableName].ctl files (plus two other files: ‘sql_load_script’ and ‘sql_load_script.sh’). From the screenshots online, ‘c:\omwb\data_files’ seems contains files with the same name as the [tableName]. Therefore, I did a search with [tableName] but cannot find any apart from the [tableName].ctl file in the ‘c:\omwb\Omwb\sqlloader_scripts\SQLServer2K\<timestamp>\Oracle’ directory. What should I do next?
OS: windows 2003 with SP1
Oracle: 10g Release 2
SQL Server 2000
Any help would be extremely appreciated.
Helen

Helen,
Sorry, I am new here. Could you please tell me (or point me to the related documents about) how to output the Oracle model as a script?Action-> Generate Migration Scripts
And what do you mean by ‘The default conversion may have failed’? Do you mean data type mapping? I went through all the columns and tables and checked the data types in the Oracle model already. The processing for the default for a table column could have something the basic workbench default parser cannot handle.
I hope you are finding the workbench to be a productive aid to migration.
Regards,
Turloch
Oracle Migration Workbench Team

Migrating from SQL Server to Oracle 8i

Hi all :),
I am trying to migrate from SQL Server to Oracle 9i.
I am using the Migration Workbench.
Everything goes fine during Capturing phase, but while
creating Oracle model the Workbench just hangs at
"Mapping Tablespaces" for over three hours.
(not exactly hangs in the sense that it responds to mouse
events and I can abort the ongoing activity ...)
What should I do ? Should I let it go on and see what
happens.
I follow each and every step as mentioned in the
documentation ... but obviously I am doing something
wrong. Any pointers ???
However ... if I try to migrate to Personal Oracle 8 ...
the migration goes fine from start to end ... just that
the SQL Server triggers aren't successfully migrated.

You may want to start by downloading the Oracle Migration Workbench. That generally does a reasonable job in moving the tables, stored procedures, etc. from SQL Server to Oracle. If your VB code is database agnostic, it should continue to work without any more intervention. Realistically, however, you'll rpobably have to at least tweak a few things that don't work the same way in the old ODBC/ OLE DB provider and the new one.
The hard part of migrations like this is that you may need to revisit some of your architectural decisions if you want Oracle to perform well. There are plenty of things that one does in SQL Server (i.e. frequent commits) to improve performance that have the opposite affect in Oracle. Identifying and fixing these sorts of things tends to be the largest part of a migration like this. Unfortunately, I don't know of a resource that talks addresses all the possible gotchas here.
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com

Migration from SQL SERVER 2008 to Oracle 10g issues.

Hi ,
I'm trying to migrate from SQL Server 2008 to Oracle 10g and I end up with some issues that I wanted to ask some info about it.
First, I was following a tutorial
http://st-curriculum.oracle.com/obe/db/hol08/sqldev_migration/mssqlserver/migrate_microsoft_sqlserver_otn.htm
and and in the last version of Oracle SQL developer I downloaded, I didn't find the Load Database Capture Script Output option.
My first question is how can I either add this option or is there a new way to load the capture script ?
Then I use the migration wizard and after following everything, I had the migration complete message from the application.
When I tried to open my connectionss, it tells me version 11.2 is required. Does that mean that Oracle SQL developper 3 only
do the migration for oracle 11g? And if I tried the previous versions, it doesn't support SQL server 2008.
What do I do in this case ?
Thanks !

Thank you for your reply.
After using the wizard and made the offline migration script, in the Migration projects window I made a move data to the oracle connection I previously made and after when I tried to reopen the connection, I couldn't.
Well I didn't retry it yet to see if I'll have the same behavior but basically this is what I think I did. When I tried to open the connection I made, it says, Oracle 11.2 is required.
Now, I just generate target from the convert model and it says migration complete but how do I test it and I do I go to oracle and see change ?
Do I had to create a special user in SQL Server to log to it first ? How do I logon to it ?
Edited by: 873671 on Jul 20, 2011 7:03 AM
Edited by: 873671 on Jul 20, 2011 7:19 AM

Migration from sql server 2005 tables to oracle tables.

Hi,
Kindly give the steps to migrate from sql server 2005 tables to oracle tables.
Kindly advise
Oracle database version:
Oracle Database 10g Release 10.2.0.1.0 - Production
PL/SQL Release 10.2.0.1.0 - Production
"CORE 10.2.0.1.0 Production"
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Edited by: 873127 on Jul 18, 2011 9:46 PM

Are you migrating or taking continual updates?
If migrating it might be worth considering The SQLDeveloper Migration Workbench (which moves more than just data)..
http://www.oracle.com/technetwork/database/migration/sqldevmigrationworkbench-132899.pdf
Cheers
David

IP migration of RAC server

Similar Messages

Maybe you are looking for