IP modem stops working

I have been using my Blackberry Curve 8320 as an IP modem using the latest update of the Desktop Manager. I have t-Mobile. Yesterday while my laptop was connected thru the BB IP modem, the USB tether was disconnected. Now I cannot connect using the IP modem feature. I get error messages that say the remote server does not respond (original message), there is a hardware error (current message), plus my wireless carrier may have turned off the service and to check my profiles to make sure my radio is on. I contacted T-Mobile and they indicated the service had not been turned off. My profiles appear to be accurate and my radio is on. Does anyone have any ideas on how to get my IP modem working again?

Well, I got my BB IP modem working again! Yesterday, I reloaded the device software on my BB. I tried the IP modem today on my laptop and my PC and it worked on both. Not positive that reloading the device software on my BB fixed the problem, but you might try to see if it works for you.
Jay

Similar Messages

USB modem stopped working after udev 091-3 upgrade

I just udated my system today and my speedtouch modem stopped working. If I try to connect i get
Connect (0.38): No such device
So i had to downgrade to udev 091-2 and its okay now. What could be the problem?

could you please delete udev.rules file and then reinstall udev?
and then try again with udev 092-2, thanks.

Modem stopped working. Cannot disconnect telephone wire. Lost internet connection

My parents DSL connection suddenly stopped working one day last week. I had them power cycle the modem which did not work. When I went to take a look at it, I noticed that the Internet light was blank. I tried a few things with no luck. I then decided to disconnect everything and start from scratch. I was not able to disconnect the telephone wire. It seems as though it fused itself into the port as I worked on it for the most of half an hour. Could this be part of the problem? If so, how would I go about getting a new modem?
As of now, the DSL light will blink and the Internet is completely blank.
Thank you

If there is a physical problem with the phone line and the modem itself, in that you can't disconnect the line from the modem, it could certainly be related to the lost connection.
I suggest you call 1-800-Verizon and ask about a replacement modem. Be sure when you call in to put in your parent's telephone number and when prompted for options in the menu, select Technical Support and High Speed Internet.
Larry
Verizon Telecom
Vz Voice Portals & Connection Wizard
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

USB 3G modem stopped working after updates

Unfortunately I don't know which update broke it, probably the new kernel? But now I don't get /dev/ttyUSB* or /dev/gsmmodem devices. Here's a log, which looks different now, and I think maybe more similar to before I installed usb_modeswitch? I really don't remmeber, it's been more than a month and I don't have logs that old. Didn't find mentions "usb_modeswitch" in /var/log/ older than today.
Jan 3 10:44:15 localhost kernel: usb 1-3: new high speed USB device using ehci_hcd and address 11
Jan 3 10:44:15 localhost kernel: scsi12 : usb-storage 1-3:1.0
Jan 3 10:44:16 localhost usb_modeswitch: switching 1bbb:f000 (USBModem: HSPA Data Card)
Jan 3 10:44:16 localhost kernel: usb 1-3: USB disconnect, address 11
Jan 3 10:44:16 localhost kernel: usb 1-3: new high speed USB device using ehci_hcd and address 12
Jan 3 10:44:16 localhost kernel: scsi13 : usb-storage 1-3:1.4
Jan 3 10:44:16 localhost logger: usb_modeswitch: adding device ID 1bbb/17/0: to driver "option"
Jan 3 10:44:17 localhost usb_modeswitch: switched to 1bbb:0017 (USBModem: HSPA Data Card)
Jan 3 10:44:17 localhost kernel: scsi 13:0:0:0: Direct-Access ALCATEL Mass Storage 2.31 PQ: 0 ANSI: 2
Jan 3 10:44:17 localhost kernel: sd 13:0:0:0: Attached scsi generic sg2 type 0
Jan 3 10:44:17 localhost kernel: sd 13:0:0:0: [sdb] Attached SCSI removable disk
Last edited by zombie_monkey (2011-01-03 09:01:02)

mark as solved

Modem quit working-help!

I have a Powerbook G4 1.5Ghz, still under warranty. The modem stopped working. I called Apple, and they won't even talk to me unless I give them $49. I'm hoping someone here can help me diagnose the problem.
I only use the modem for faxing. Now it won't get any further than "Preparing Fax". I check the log files and I find when the computer starts up "Sep 14 15:52:11 localhost kernel[0]: AppleI2SModemFamily::SSIStartUp -- SSIStartUp3034 two sync mode is UNSUCCESSFUL after 20 tries!"
Apple Hardware test says "modem detected" and nothing more.
I've tried resetting PMU and PRAM. I've tried installing a clean system.
I tried opening zterm to see if the modem is responding at all, and Zterm says "### Error: 16 opening port"
I hope someone out there can help me out.

Recently had the same problem. You did much of the same things I did. AppleCare referred me to the Genius Bar at the Apple Store nearby. After about 45min of them doing tests, etc. they concluded that the modem was defective. My PowerBook was packed up and sent off for repair.
Don't know if this helps much.
Steve D.

TS3623 purchasing a movie from apple tv has stopped working. I click on "movies" and it takes me back to the same screen instead of the movies available. I have updated software, unplugged the modem & apple tv box, & the tv; Netflix still works!

purchasing a movie from apple tv has stopped working. I click on "movies" and it takes me back to the same screen instead of the movies available. I have updated software, unplugged the modem & apple tv box, & the tv; Netflix still works!

Welcome to the Apple Community.
First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings). You should also try restarting your router.
If both of the above don't help, you should try a restore (Settings > General > Reset > Restore).

My Airport Extreme just stopped working. The message says ethernet cable not plugged in, but it is. Cable modem works fine. Is this a common problem?

My 2-year-old Airport Extreme instantly stopped working last night and is flashing the status light. The problem description is that the ethernet cable is not plugged in... however, the ethernet cable is still plugged into the cable modem. I checked the modem by plugging directly into my laptop... it works fine. Is this a common problem? Is there anything I can try other than sending it in for warranty repair?

At this point, before sending it back, I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Ha

My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
Has anyone had that happen? Solution? (other than purchase a new one.......)

My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
Has anyone had that happen? Solution? (other than purchase a new one.......)

Huawei E220 HSDPA modem (Vodafone Vodem) stopped working

Hi there,
My faithful Powerbook is having issues with a company issued Vodafone Vodem (Huawei E220 wireless HSDPA 3G USB modem).
It worked well at first, but then after restarting, waking from sleep or rebooting from off, the Vodem would cease to connect to Vodafone, with the Vodafone Modem Software giving me a cryptic message "No modem or data card attached".
Yesterday, I tried reinstalling and uninstalling the software, and after several installation/uninstallations, it finally reconnected. It has since stopped working again since shutting down the Powerbook overnight. Reinstalling has not yet worked.
I read somewhere on the net that leaving the modem plugged in for a minute before attempting to connect might work - alas no such luck.
Has anyone else out there had problems with their Vodafone/Huawei E220 USB wireless modem, and how did you resolve the problem?
I have tried both the New Zealand 2.07 version, plus the European 2.08 version of the Vodafone connectivity software.
I am running a Powerbook 15", 1.67ghz, MacOS 10.4.11, 512MB, no other peripherals connected.

hi
I'm using a vodem on my Intel mac book and never even use the software vodafone provide as it is clunky, slow and unreliable.
i used it once to set up the connection and from then on have simply connected through system preferences:network: and connect the huawei modem from there. it even gives you the option of having an icon in your top tool bar.
hope this helps
cheers

Every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

I just spoke with Tesco technical support (having been transferred to them by Clubcard support), who told me that the problems people are experiencing when visiting the Tesco site via Safari aren't currently being addressed because "not enough people have called to complain about it".
I asked what percentage of people he thought might make the effort to call instead of just giving up. He replied that he would be one of those who just gave up.
So it would seem that if we would like the problem to be resolved, we each need to take a few moments to CALL TESCO and ensure our complaint is logged by the technical support team.
Every voice helps

Time Capsule used as router attached to Comcast Modem. wireless stops working. All I have to do is unplug the TC and plug it back in and TC cycles up and have green light as well as the Comcast modem operates correctly. TC 4 yrs old. How do I correct?

Time Capsule used as router attached to Comcast Modem. Wireless stops working with no light showing and Link indicator on modem off.
All I have to do is unplug the TC and plug it back in.
TC cycles up and green light appears as well as the Comcast modem operates correctly.
TC 4 yrs old. How do I correct?

I have the latest and greatest Time Capsule and Comcast. Here is the weird thing. If I have one network set up, then occasionally that network will wedge. If I set up a 5GHz and a 2.4GHz network, then one of them (usually the 5GHz) will wedge. I saw this with a previous Time Capsule, Apple said call Comcast. They checked it out and said it was Apple's problem. Apple said maybe you Time Capsule is bad, so I bought a new one. The problem persists.
Tonight it's not complely wedged, but super slow. The 5GHz network is getting 0.45Mb/s while the 2.4GHz network is getting 17Mb/s. Both are coming in from the same Comcast cable modem. Apparently the Time Capsule treats them as separate.
Is it the cable modem or the Time Capsule. I am betting on the Time Capsule, since rebooting it fixes the problem. Resetting the cable modem does not.
Apple is NO HELP at all. They say reset the Time Capsule. Did that fix it? Yes. Problem solved! No, problem not solved. It will happen again in a few hours.
Here's the traceroute. Note what happens a few hops away. At hop number 7 the ping times go up by a factor of 200.
Huginn:~ darrell$ traceroute 128.114.48.10
traceroute to 128.114.48.10 (128.114.48.10), 64 hops max, 52 byte packets
1 10.0.1.1 (10.0.1.1) 0.952 ms 0.886 ms 3.428 ms
2 67.170.200.1 (67.170.200.1) 43.269 ms 27.611 ms 21.004 ms
3 te-7-1-ur01.scotts.ca.sfba.comcast.net (68.85.101.53) 11.252 ms 8.450 ms 9.778 ms
4 te-1-5-0-7-ar01.sfsutro.ca.sfba.comcast.net (68.87.226.14) 15.026 ms 27.372 ms 15.516 ms
5 he-3-9-0-0-cr01.sanjose.ca.ibone.comcast.net (68.86.91.45) 14.374 ms 17.450 ms 24.752 ms
6 pos-0-0-0-0-pe01.529bryant.ca.ibone.comcast.net (68.86.86.122) 14.627 ms 15.408 ms 14.460 ms
7 xe-1-2-0.0.paix0.tr-cps.internet2.edu (137.164.130.233) 1583.490 ms 2697.533 ms 3240.337 ms
8 xe-1-1-0.482--2152.paix0.tr-cps.internet2.edu (137.164.131.62) 2413.800 ms 2937.085 ms 2667.384 ms
9 dc-svl-core1--svl-px1-10ge-3.cenic.net (137.164.46.14) 4362.188 ms 2399.774 ms 1397.535 ms
10 dc-svl-agg1--svl-core1-10ge.cenic.net (137.164.47.120) 588.755 ms 2447.772 ms 1795.253 ms
11 137.164.3.49 (137.164.3.49) 3179.385 ms 1718.755 ms 240.350 ms

Wifi has suddenly stopped working. There is an exclamation mark which takes me to network diagnostics. This asks me for network name and password. This is different from the startup wizard which only asked for a WEP key and modem name. What to do?

My wifi has suddenly stopped working on my iMac, after working fine for almost a year. There is an exclamation mark on the wifi bars and when I click it, it takes me to a network diagnostics page. This page asks me for my username and password for the wifi, which I don't have. It is different from the WEP key and modem name, which I originally used to set up my connection. I have not experienced any problems on all my other wifi-enabled devices. Ipod touch, iPad, MacBook all work fine. What should I do?

The name is the name of the network you created on the router. The password is the WEP password. You shouldn't be using WEP at all, as it's insecure and also seems to cause connection failures. Use WPA 2 Personal. If your router doesn't support it, get a new one.

USB optical mouse suddenly stop working and PCI Modem driver

I have 2 Problems
1 . Driver not found for the PCI Modem -
2. Optical mouse stops working suddenly -QLX Mouse
i have reinstalled the XP before reinstalling i had no problem with mouse it working fine
PCI\VEN_8086&DEV_266D&SUBSYS_3080103C&REV_03\3&B1BFB68&0&F3
The drivers for this device are not installed. (Code 28)
Kindly sugest me the what to do

Hello rajeevkumar30
As I understand it you reinstalled Windows XP and now you have devices that are not being installed correctly? I would suggest that you visit the Compaq Presario V2000 CTO Notebook PC Drivers page and ensure that ALL your drivers and software are up to date. I would start with any BIOS and Firmware updates first than ensure your Drivers are up to date before moving on to your software.
As these are the drivers designed for your system this should resolve your issue. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

"Configfree has stopped working" error on Satellite L300 running Win7_32bit

Full text message *ConfigFree Task Tray Menu has stopped working*
Every time the USB modem (Huawei E352 HSPA USB stick) connects this error appears. Running Win7 Ultimate 32 bit.
Did Google search: some reckon it's a virus, others reckon it's a hardware/software issue.
How do I fix it? Any ideas?
Thanks

It is not easy to help you because you use external third part hardware. I dont think ConfigFree is tested so intensively with all kinds of external devices.
Why this happen can be just speculation. Fact is that ConfigFree is not necessary to run so I recommend you to exit ConfigFree before you start to use your modem. How to fix it? Good question. What you can do about it? Not much. Maybe to search for newer ConfigFree version and reinstall it in hope it will be OK. In my opinion, not more than that.
I use ConfigFree constantly with LAN and WLAN networks and there is no problem at all.

IP modem stops working

Similar Messages

Maybe you are looking for