Ip nat pool no-overload prefix 22 (just starting out with the cisco training and wanted to know )

Above is the command ip nat pool no overload prefix 22
Does anyone know what the prefix 22 does and why it is added. I also and new at learning and currently studying and wanted to know any recommendations for taking the CCNA or CCNP and what online routers (emulators) can i play on to learn commands and prepare for exams

Hi,
It is just describing the prefix length for the network or Subnet Mask in general terms.
Check this:-
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr/command/ipaddr-cr-book/ipaddr-i3.html#wp6064781280
Thanks and Regards,
Vibhor Amrodia

Similar Messages

I just started a Hawaiian Internet Radio Show and wanted to know the process in tapping into the Cd's of the Musical Artists that I play on my Internet Radio Show and would love to be compenstated on the Songs that I play through I Tunes? Please advise

Aloha Please direct opinions on what to do.. Thank You

http://www.apple.com/itunes/affiliates/
I presume you have obtained all necessary performance licenses for playing this music on the Internet, yes?

Upon start up of my laptop I get a APS Daemon.exe system error - MSVCR80.dll is missing. This just started out of the blue. At one point it told me to reinstall ITunes. Is that truly necessary?

Upon start up of my laptop I get a APS Daemon.exe system error - MSVCR80.dll is missing. This just started out of the blue. At one point it told me to reinstall ITunes. Is that truly necessary?

I have the same issue after installing the new update and reinstalling iTunes doesn't fix the issue.
I found disabling Apple push (APSDaemon.exe) from the start up will stop the error from appearing, however this will disable wireless syncing. If you don't use it than it shouldn't be an issue.
I'm using a PC so you can disable it using the msconfig command and turning it off in the Startup tab. I don't know if Mac users are experiencing the same issue. Hopefully Apple will fix it in their next update.

My Ipod touch is acting very annoying. When i press the sleep/wake button to turn it on it just turns on with the apple logo and stays there. The screen will then blink white occasionally and the process will start again.

My Ipod touch is acting very annoying. When i press the sleep/wake button to turn it on it just turns on with the apple logo and stays there. The screen will then blink white occasionally and the process will start again. Once when it turned white. i pressed the power and home buttons at the same time and then the above process continued.

Sounds like your iPhones software may be corrupt. Try placing the iPhone into recovery mode. To do this, follow the steps in this article:
http://support.apple.com/kb/HT1808
Hope this helps
- Greg

Updated to ios6 on my ipod touch 4g when i try to turn it on it doesn't, it just comes up with the itunes symbol and the usb, so i plugged into laptop opened itunes and it says to restore back to ios5 i pressed restore and it cant connect to server? help?

updated to ios6 on my ipod touch 4g when i try to turn it on it doesn't, it just comes up with the itunes symbol and the usb, so i plugged into laptop opened itunes and it says to restore back to ios5 i pressed restore and it cant connect to server? help?

Maunally restore it. In order to do this:
-Download the iOS 5.1.1 firmware from here http://www.redmondpie.com/download-5.1.1-ios-for-iphone-4s-4-3gs-ipad-ipod-touch -direct-official-links/
1. After downloading the firmware from the given link, open iTunes and click on your device.
2. Now press SHIFT on your keyboard and while pressing it click on "Restore".
3. A dialog box will appear.
4. Select the firmware you downloaded and click ok.
5. Done!!! Your iPhone will now be restored to 5.1.1 and if you had backed up your iPod before, then you can put all its settings afterwards.

Help I just get stuck with the blank screen and the white circle

help I just get stuck with the blank screen and the white circle after i erase all content and setting
i dont know how to do pls help.

Try connecting the device to your iTunes library and restoring it. If necessary place the iPod into recovery mode using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock

Has anyone started out with creative cloud photography and later upgraded to the full bundle?

Has anyone started out with creative cloud photography and later upgraded to the full bundle?

Lenora, I'm curious about the same thing.
I currently have the cloud's Photoshop and Lightroom program, and would like to upgrade to the full Creative Suite.
The listed pricing doesn't distinguish between types of previous customers. I don't know if I'm considered an existing CS customer because I have other individual cloud products, or if I must have already purchased the entire suite in the past. Any insight would be grand.
Complete — For New Customers
US$59988/yr
Annual plan, paid monthly
Annual plan, prepaid
Monthly plan
Latest Photoshop, Illustrator, and more, plus cloud features
ProSite portfolio website
Typekit desktop and web fonts
20 GB of cloud storage
BUY NOW
SPECIAL FOR CS CUSTOMERS
Complete — For CS CustomersUS$35988/yr
Annual plan, paid monthly
Annual plan, prepaid
Save up to 40% on first year. See terms
Requires prior purchase of CS3 or later

Tried twice to install Lion but both times on restart just end up with the apple screen and whirlygig???

Tried twice to install Lion but both times on restart just end up with the apple screen and whirligig?? Anyone Help?

https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

A few months ago, my G5 started up with the address book and mail opened at startup. They are not in startup items, and I cannot get this to stop. Any suggestions?

A few months ago, my power mac G5 began starting up with the address book and mail already open on the desk top.
Neither of these is in my startup items, so I am at a loss as to stop this behavior.
Any suggestions?

Are they in Login items under System Preferences/Users/Login Items?
In the Dock, right click the Address Book and Mail icons, select Options, and make sure "Open at Login" is not selected.

Just Starting out with java packages

Hello,
I'm a beginner and I'm starting out with java packages.
I wrote two simple .java files, one test program and one containing a simple class.
Both files are compiling without errors but When I run the program I get an error NoClassDeffoundError.
I use the import <package> statement And I think I'm using the CLASSPATH variable correctly.
SET CLASSPATH=d:\nopol
path for the .java containing the test class is:
d:\nopol\utilities \myapp.
In the test file I use "import utilities.myapp.*.
I would be very happy if anyone could help me
Thanks beforehand
Nopol.

The test file should be in d:\nopol, if it's not a part of your package utilities.myapp. Everything should be compiled from d:\nopol, the test class with "javac ClassName.java" and the class in the package with "javac utilities/myapp/ClassName.java".
Your classpath seems fine for now, though. But yes, do add the period there, otherwise you could run into problems later.

Just joined up with the Adobe CC, and get error U44M1l210

Just joined up on the Adobe CC, and lightroom installed and updated fine, but when installing Photoshop, it errors during the install with U44M1l210.
I then went back after running each app, and tried to update, again still the same error on failure. Looking around, I saw that I should try and remove the app, and reinstall.
After the removal, reboot, and reinstall I still got the same error. I then tried to use the in-program updater, which is said there were updates, but again it ended with the same error.
I don't see anyplace to just download the update and install it manually, if there is one, maybe someone can give me a pointer.
Asking for more detail in the CC app, it says the following:
Update Failed
Unable to extract the downloaded files. Press retry to download again.(U44M1l210)
Needless to say I have tried each option many times over, and am at a loss where to go next..

Hi,
I'm in the same situation as you. I've done a new install of CC on windows 7 64-bit, the initial app install worked but all patches/updates failed to install via the Creative Cloud manager. I got the same error code as you.
I installed the updates manually from http://www.adobe.com/downloads/updates.html and that worked. However, the Creative Cloud Manager is complete oblivious to the fact that the apps are now up-to-date and is still telling me there are updates, even after a reboot. When I clicked on the install button in the hope that this would sort it, it fails with the same error code.
So this is only half a solution. You can update your apps by downloading manually from the website but it doesn't sort the problem with the Creative Cloud manager and will be a real hassle going forward - I'm using quite a few of the apps not just one or two.
Any solutions greatfully received

Just starting out with calculations between fields

I'd like to to include some text fields where numbers are entered, then a button is pressed, and the mathematical results of the fields are displayed.
In Adobe Acrobat Pro 9 I opened Forms ... Start Form Wizard, and placed all the elements - three Numeric fields and a button. I want to add Javascript to the button to calculate the fields, but I can't see any way to add the script to the button. Can someone tell me what the steps are to add a script to the button? Should I be using something other than Form Wizard?
These results (multiplication and division) should simply display in the Numeric field. They won't be saved anywhere. I have the Javascript already working on mobile devices and want to create a PDF version for those without smartphones.
Thanks!

The first thing you need to know is that Acrobat uses a completely different object model than a browser. For more information, see the Acrobat JavaScript documentation at: http://www.adobe.com/devnet/acrobat/javascript.html
The result field can be set up with a custom Calculate script that automatically calculates the result, so the button is not necessary. Try the following as the custom Calculate script for the result field:
(function () {
    // Get the field values, as numbers
    var v1 = +getField("spurGear").value;
    var v2 = +getField("pinionGear").value;
    // Set this field's value
    event.value = (v2 !== 0) ? v1 / v2 : "";
If you really want to use the button, the code would be:
// MouseUp script for button
(function () {
    // Get the field values, as numbers
    var v1 = +getField("spurGear").value;
    var v2 = +getField("pinionGear").value;
    // Set this result field's value
    getField("result").value = (v2 !== 0) ? v1 / v2 : "";
You can place these as document-level functions and call them, in which case the first one would be:
function calcGearRatio() {
    // Get the field values, as numbers
    var v1 = +getField("spurGear").value;
    var v2 = +getField("pinionGear").value;
    // Set this field's value
    event.value = (v2 !== 0) ? v1 / v2 : "";
and it would be called like this in the calculate event:
calcGearRatio();

Just starting out with extensions, is this possible?

I have started researching the Adobe Creative Suite Extension Builder and I find that there is an overwhelming amount of information on this tool. I have an idea for extension that I want to build but I want to start by asking the community a question.
Assuming this extension is for Flash Pro, Photoshop, or Illustrator, is it possible to obtain data from a layer that includes the positions (x,y) and dimensions (width,height) for each object in a layer?
Gladly appreciate any help or advice you can give, thanks!

Hey MSSDedalus,
I looked through some of the class documentation and it seems that what I'm looking for is somewhat possible (at least using the Illustrator APIs, look at the PageItem class if interested). Would you happen to know where the documentation is for the Flash Pro CS6 API? I'm only able to find the JavaScript API for Flash Pro.
Thanks!

My 27 inch imac has just started acting weird, the thumbnail images and folder on the desktop have disappeared although the titles are still visible. When I open a programme the programme windows are all black and the drop down menus just show random

When I tried to open the web browser the browser flashed black and white at start up, then all the applications when i open a new window are completely black, I am unable to view the drop down menus as the come out as random pixels. This happens to all new applications i have been able to open. The document window opens as plain white but if you click on it it opens a document even though you cant see any thumb nails. Some of the documents are open as normal images/files. Having been a mac user for 10 years i have never seen anything like this before, any ideas or suggestions

I have started running a virus check.
There are no viruses for OSX. Uninstall the software, repair permissions and restart your computer. Especially if it's Norton's. It's known to cause problems.
To rule out a hardware problem, run the hardware test: http://support.apple.com/kb/PH11342 OS X Mountain Lion: Use Apple Hardware Test and zapp the PRAM: http://support.apple.com/kb/PH11342 OS X Mountain Lion: Use Apple Hardware Test.
In the end you may need to lug your iMac down to your local AASP or an AS. Diagnostic testing is FREE!
i have had a mac in fact it is 17 years.
You got me beat by 3 yrs.

JavaScript errors - Just started out of the blue

Running Dreamweaver MX (6.1) and have been fine for quite a
while - No new apps on the machine other then what Microsoft sends
over the wire for updates (Windows XPPro, sp3) but now if I am
editing more then one html page at the same time, if I switch from
one to another, I get:
while executing getCurrentValue in AddressURL.htm, a
JavaScript error occured
There is no javascript code on my pages and I've uninstalled
and re-installed Dreamweaver twice, the last time with my Kaspersky
2009 turned off, followed all the troubleshooting items from the
prior posts of similar errors (and yes, step #4) and can't get rid
of this - Running no extensions, no servers, just one local site.
These are html pages I have used for years - Something broke
dreamweaver and I don't know what nor how to find it.
If anyone has any ideas, please let me know as it is
incredibly annoying.
Thanks,
Bob

See if this helps:
http://www.adobe.com/go/tn_19105
Ken Ford
Adobe Community Expert Dreamweaver/ColdFusion
Adobe Certified Expert - Dreamweaver CS3
Adobe Certified Expert - ColdFusion 8
Fordwebs, LLC
http://www.fordwebs.com
http://www.cfnoob.com
"makeitwrite" <[email protected]> wrote in
message news:ghptsf$h8v$[email protected]..
> Running Dreamweaver MX (6.1) and have been fine for
quite a while - No new apps
> on the machine other then what Microsoft sends over the
wire for updates
> (Windows XPPro, sp3) but now if I am editing more then
one html page at the
> same time, if I switch from one to another, I get:
>
> while executing getCurrentValue in AddressURL.htm, a
JavaScript error occured
>
> There is no javascript code on my pages and I've
uninstalled and re-installed
> Dreamweaver twice, the last time with my Kaspersky 2009
turned off, followed
> all the troubleshooting items from the prior posts of
similar errors (and yes,
> step #4) and can't get rid of this - Running no
extensions, no servers, just
> one local site. These are html pages I have used for
years - Something broke
> dreamweaver and I don't know what nor how to find it.
>
> If anyone has any ideas, please let me know as it is
incredibly annoying.
>
> Thanks,
>
> Bob
>

Ip nat pool no-overload prefix 22 (just starting out with the cisco training and wanted to know )

Similar Messages

Maybe you are looking for