Ip not excluded in dhcp server with acs server in the network

Someone could explain me that problem could have, if I have the following situation:
A dhcp Server, ACS Server, and various switches 3750 interconnected. But a hosts in the network has assigned statically one of the directions that the dhcp Server can assign to the computers.
Rank of IP to assign for dhcp Server: 172.23.8.1 172.23.8.100
Ip static of the host of network: 172.23.8.17
The ip 172.23.8.17 not this excluded in the dhcp Server.

Hola,
I am not totally clear on what you are asking: do you want to statically assign IP 172.23.8.17 to your server ? Can you clarify ?
Saludos,
GNT

Similar Messages

Can I use DHCP snooping and IOS DHCP server on the same switch stack

Hello,
I am shortly going to be deploying a Cisco CallManager solution for a customer whose network comprises stacks of Catalyst 3850 switches.
There is no separate core/server farm switch so the CallManager servers, voice gateways and IP phones will all plug into the same stack and be in the same VLAN (not my choice!).
For security we want to enable DHCP snooping and were planning on using the IOS DHCP server on the Catalyst switch stack.
Will this work? - when I enable DHCP snooping in networks with separate access layer switches I set the uplinks to the core as trusted links.
I am not sure whether DHCP snooping will work in this case. Do I need to set the VLAN interface on the switch as trusted, is this even possible?
Unfortunately I do not have access to a layer 3 switch to test this at the moment.
Thanks

Nope. That's the issue.
They'll sync on a third device acting as a hotspot, but the device sending a signal is not "on" the network it creates so the airport is all by itself on that network. At least that is what it looks like to me. Anyone have another take on it? Seems pretty silly that an iPad can put out a wifi signal, an Airport Express can receive a wifi signal, and yet there is no simple way to get them to communicate under this particular condition.

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

My bookmarks suddenly are not accessible. Each time I try to use a bookmark, the following message comes up on the error page: The requested URL /exec/obidos/subst/home/home.html/103-3592028-6560639 was not found on this server. The page error is ident

My bookmarks suddenly are not accessible. Each time I try to use a bookmark, the following message comes up on the error page: The requested URL /exec/obidos/subst/home/home.html/103-3592028-6560639 was not found on this server. The page error is identified as "ERROR 404" I tried a clean install of the latest version; no luck. looked at plug-ins & add-ons; no luck
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Hi Mac Attack,
My computer will not disconnect from the internet. It seems to find a clone router and continues even when I shut down and unplug my my own home iy
Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
Have a look at your settings in Safari > Preferences. Especially General and Privacy.
Reset Safari to remove cookies and other stored data.
System Preferences > General
Have a look at your settings in System Preferences > Security & Privacy.
Call back with more questions.
Regards,
Ian

"Could not connect to any server in the specified cluster"

Dear all,
can anybody help me out? I tried to log on in HFM and get the error message as following:
"Could not connect to any server in the specified cluster"
Code: -2147217086
Description: An error occurred processing the result from the server.
Trace: Error Reference Number: {1205F141-A444-4750-B3CE-729E53F12279}<BR>Num: 0x80041142;Type: 1;DTime: 1/13/2012 2:00:57 PM;Svr: V-HOISTHYP1;File: CHsxClient.cpp;Line: 850;Ver: 11.1.2.1.000.3082;<BR>Num: 0x80041142;Type: 0;DTime: 1/13/2012 2:00:57 PM;Svr: V-HOISTHYP1;File: CHsxClient.cpp;Line: 3671;Ver: 11.1.2.1.000.3082;<BR>Num: 0x80041142;Type: 0;DTime: 1/13/2012 2:00:57 PM;Svr: V-HOISTHYP1;File: CHFMwManageApplications.cpp;Line: 2722;Ver: 11.1.2.1.000.3082;
Any idea would be greatful!
Thanks a lot in advance
Hoi

Hi Hoi,
     Financial Management Error "Could not connect to any server in the specified cluster" When Opening Application (Doc ID 742386.1)
     Sporadic "Access Denied" Error Messages Running Financial Reports Against Hyperion Financial Management (Doc ID 753013.1)
     Sporadic "Access Denied" Messages for Reports with Hyperion Financial Management (HFM) Data Source (Doc ID 760412.1)
Hope this helps,
Thank you,
Charles Babu J

Mail suddenly not being received from server. The ISP tells me there's nothing wrong at his end. I can see emails on the server if I look up WebMail; they don't come into Mail. I haven't changed anything lately.

Mail suddenly not being received from server. The ISP tells me there's nothing wrong at his end. I can see emails on the server if I look up WebMail; they don't come into Mail. I haven't changed anything lately. The incoming server details haven't changed; the Connection Doctor shows the accounts are connected; I've turned everything off including the modern. Have exhausted my limited knowledge. Anyone with something similar?

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
I want to simultaniously provide a Wifi connection and a LAN connection at the same time
Thanks,
BRad

HT1222 I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be..

I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be...
I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

I updated from Snow Leorard to Moutain Lion and now my internet will not recognise my password. All other comps use the network but my Mac upgraded Mac Mini keeps coming up with either 'timeout' or 'user or password not recognised' ...help!

Hello all
I upgraded from Snow Leopard to the latest Mountain Lion OS and now my Wifi will not work. When I try and insert the password to my Wifi network states either 'connection timed out' or 'password and/or user name not recognised' please help...!

Take each of the following steps that you haven't already tried, until the problem is resolved.
Step 1
Restart the router. Many problems are solved that way.
Step 2
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 3
From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.
Step 4
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 5
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 6
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.

Details: Numbers not translating an Excel document with column headings where the text is rotated counter clockwise 90 degrees with-in the cell. Can you tell me how I can rotate the contents with-in a cell?

Details: Numbers not translating an Excel document with column headings where the text is rotated counter clockwise 90 degrees with-in the cell. Can you tell me how I can rotate the contents with-in a cell?

Numbers does not have rotated text within cells. You can place a text box over the cell that has rotated text but you cannot rotate text within a cell.

Do not have authorization for access with activity 03 on the InfoProvider

Hi,
I have developed new cube & ODS and created new Web Templates based on queries on these Infoproviders.
I have created new role and adde these templates to menu of this Role.
In Authorization profile i have used following Authorization objects.
S_RS_BTMP
S_RS_COMP
S_RS_COMP1
S_RS_ICUBE
S_RS_ODSO
In all these objects i hace selected activity 3.
Infoarea used for these new Cube & ODS is also added and for cube & ODS selection ihave used * (full authorization)
But when user is opening the web template it is showing error messahe
"You do not have authorization for access with activity 03 on the InfoProvider ZICXEROX."
Is there is any authorization object missing in the profile?
Regards
SSS

Dear SSS,
Have the same problem ' You do not have sufficent authorization for the infoprovider'. so could you please send the document from my mail id
[email protected].......
plaase very very urgent
Regards
Ahmed.

This bundle is invalid. Apple is not currently accepting applications built with this version of the SDK.

Hello,
I'm not Able to post Application with Xcode 4.6.2, while uploading it is giving me error "This bundle is invalid. Apple is not currently accepting applications built with this version of the SDK", Pls advice me what SDK it'll work with?
Thanks in advance

Hello Michael, today I received this error when submiting ios app to store using Application Loader. The message is "This bundle is invalid. Apple is not currently accepting applications built with this version of the Xcode". My Xcode version is "Version 5.0.2 (5A3005)", I don't know what to do now, I also uninstalled Xcode and reinstall again but no luck. Any advice?

HT4628 My Wi-Fi connection on my iMac drops frequently. The other computers in the house do not have this problem. If I go into the Network Preferences and choose my Network it connects immediately but it does not remember the setting.

My Wi-Fi connection on my iMac drops frequently. The other computers in the house do not have this problem. If I go into the Network Preferences and choose my Network it connects immediately but it does not remember the setting and I must reselect my network frequently.

The iMac picks up a wireless signal from the back of the screen, so you would want to avoid having it close to a wall, or in a confined area where the wireless signal cannot easily reach the iMac's antenna.
We don't know how far the iMac is from your wireless router, or how many walls or other obstructions might be in the signal path that would limit the quality of signal that the iMac receives.
Nor do we know whether you might have a cordless phone near the iMac, or whether you may be using a wireless keyboard and/or mouse....all of which can interfere with the wireless signal.
Can you provide some more info on this?

My ipad is not allowing me to join thenetwork. i can see the network but when i try to click it, it will not allow me to join. pls help

my ipad is not allowing me to join thenetwork. i can see the network but when i try to click it, it will not allow me to join. pls help

The next iOS update won't change this.
Are you able to transfer anything else from your iTunes library and computer via the iTunes sync process such as a movie, TV show, podcast, audio or print book, apps, and photos from your computer?
What is selected under the Music tab for your iPhone sync preferences with iTunes.

TS1559 hello guys i wanted to ask u about my ipad wifi is not turning on and i have tried to reset the network but still is not working please i need ur help

hello guys i wanted to ask u about my ipad wifi is not turning on and i have tried to reset the network but still is not working please i need ur help

Thank you. I will try your tip. And if it works, I'll give you 10 points . But now its been charging for hours and its still the same . But thank you!

Ip not excluded in dhcp server with acs server in the network

Similar Messages

Maybe you are looking for