Ip over dcc, stack consists dcc, hdlc,ppp,clnp,ip

hi all,
sdcc channels are the D1,D2,D3 bytes in the header part of the sdh. these channels are used for network management data. in dcc we use to hdlc or LapD/ppp protocol at data link layer and then ip protocol. ip is the logical address so what is the address format we can use at physical lavel in this stack.
thanks & regards,
vishnu

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.

Similar Messages

cfchart Can I overlay a none-stacked cfchartseries type="line" over a stacked bar graph?

Creating the stacked bar graph works well... but I'd like to overlay some non-stacked line-type chartseries over the bars. I don't appear to be able to do this as the lines just stack on top of one another.
Any ideas if you can mix stacked bars with non-stacked lines? (CF8)
Thanks

The graph wizard in Reports 9i allows you to create a dual Y combination graph - is this not sufficient for your needs, or am I missing something?
Danny

How to draw cumulative line graph over the stacked bar chart?(SSRS)

Hello,
I need your help to draw a cumulative line graph over this bar chart.
I need your help to draw a cumulative line graph over this bar chart in SSRS.
The dimension (Category Group) is "Hour" in this case. and expression is sum of two distinct values like 'Y' and 'N' in Activity column(Series Groups). The sum(Activity=Y) in green color and sum(Activity='N') in Red color.
I require to draw a cumulative line graph in this same chart, that should give the result of cumulative Sum(Activity) for each hour?? I mean sum of (Y+N) for each hour and that should be cumulative over the hour.
I mean sum of (Y+N) for each hour and that should be cumulative over the hour.
SSRS Version details:
Microsoft SQL Server Reporting Services Designers
Version 10.50.1600.1
--Siva

Hi Siva,
It seems that you need to verify your email address to post images, etc
Besides, Microsoft® SQL Server™ 2008 Reporting Services: Step by Step is a good choice to you. With STEP BY STEP, you work at your own pace through hands-on, learn-by-doing exercises. A companion CD includes data sets and sample code. You can download
it from this link http://my.safaribooksonline.com/9780735626041 Click the Extras, you can get the samples and database from Supplemental Content.
And there are vast of valuable articles and SQL Server Reporting Services Books Online in MSDN ,you can click these link to begin your learning journey, SQL Server Reporting Services 2008 Books Online:
http://msdn.microsoft.com/en-us/library/ms159106(v=SQL.100).aspx
Besides these, there are still many valuable videos in Microsoft Webcast, click this link
https://msevents.microsoft.com/cui/SearchDisplay.aspx?culture=en-US#culture=en-US;eventType=0;sortKey=;sortOrder=;pageEvent=false;hdnInitialCount=;searchcontrol=yes;kwdAny=Reporting%20service to register with a windows live ID, then download the ones you
want.
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

Pivot Table - Stack Graph - mouse over for legends

Hi,
I have a Pivot table with Levels as the x axis, like level1, level2, level3, level4. The Y axis is stacked with Project names, each stack with the cost of the project. There are 40 projects, and the Legend looks too crowded because of so many projects.
Is there a way to display the Projects and the cost, when the mouse rolls over the stacks, currently it displays only the cost?
Thank you for your time and help.

Hi Diney,
I Have to show all the projects per client requirement, I want to remove the legends(which I already did), and instead show the project name only when the mouse is rolled over in the graph. Is it possible?
Thanks for your time and help.

Question-Super Imposing Line over stacked

Hi
I have used a line chart over an stacked chart and i have used the secondary axis for the line chart. The idea of doing so is that the line chart controls my sales data and the stacked chart shows me the spend on different sectors. both the charts are controlled by a combo box for months. When i try to change the months the charts behave in a haphazard way with the axis moving over one another. how do i resolve such an issue ?

Hi
You'll need to synchronise both of the chart's scales, to manual and probably have a formulae to work out when the best Min and Max values should be for both charts.
Thanks
Charles

Ask the Expert:Concepts, Configuration and Troubleshooting Layer 2 MPLS VPN – Any Transport over MPLS (AToM)

With Vignesh R. P.
Welcome to the Cisco Support Community Ask the Expert conversation.This is an opportunity to learn and ask questions about concept, configuration and troubleshooting Layer 2 MPLS VPN - Any Transport over MPLS (AToM) with Vignesh R. P.
Cisco Any Transport over MPLS (AToM) is a solution for transporting Layer 2 packets over an MPLS backbone. It enables Service Providers to supply connectivity between customer sites with existing data link layer (Layer 2) networks via a single, integrated, packet-based network infrastructure: a Cisco MPLS network. Instead of using separate networks with network management environments, service providers can deliver Layer 2 connections over an MPLS backbone. AToM provides a common framework to encapsulate and transport supported Layer 2 traffic types over an MPLS network core.
Vignesh R. P. is a customer support engineer in the Cisco High Touch Technical Support center in Bangalore, India, supporting Cisco's major service provider customers in routing and MPLS technologies. His areas of expertise include routing, switching, and MPLS. Previously at Cisco he worked as a network consulting engineer for enterprise customers. He has been in the networking industry for 8 years and holds CCIE certification in the Routing & Switching and Service Provider tracks.
Remember to use the rating system to let Vignesh know if you have received an adequate response.
Vignesh might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Service Provider sub-community discussion forum shortly after the event. This event lasts through through September 21, 2012. Visit this forum often to view responses to your questions and the questions of other community members.

Hi Tenaro,
AToM stands for Any Transport over MPLS and it is Cisco's terminology used for Layer 2 MPLS VPN or Virtual Private Wire Service. It is basically a Layer 2 Point-to-Point Service. AToM basically supports various Layer 2 protocols like Ethernet, HDLC, PPP, ATM and Frame Relay.
The customer routers interconnect with the service provider routers at Layer 2. AToM eliminates the need for the legacy network from the service provider carrying these kinds of traffic and integrates this service into the MPLS network that already transports the MPLS VPN traffic.
AToM is an open standards-based architecture that uses the label switching architecture of MPLS and can be integrated into any network that is running MPLS. The advantage to the customer is that they do not need to change anything. Their routers that are connecting to the service provider routers can still use the same Layer 2 encapsulation type as before and do not need to run an IP routing protocol to the provider edge routers as in the MPLS VPN solution.
The service provider does not need to change anything on the provider (P) routers in the core of the MPLS network. The intelligence to support AToM sits entirely on the PE routers. The core label switching routers (LSRs) only switch labeled packets, whereas the edge LSRs impose and dispose of labels on the Layer 2 frames.
Whereas pseudowire is a connection between the PE routers and emulates a wire that is carrying Layer 2 frames. Pseudowires use tunneling. The Layer 2 frames are encapsulated into a labeled (MPLS) packet. The result is that the specific Layer 2 service—its operation and characteristics—is emulated across a Packet Switched Network.
Another technology that more or less achieves the result of AToM is L2TPV3. In the case of L2TPV3 Layer 2 frames are encapsulated into an IP packet instead of a labelled MPLS packet.
Hope the above explanation helps you. Kindly revert incase of further clarification required.
Thanks & Regards,
Vignesh R P

Cross connecting 3750 stacks

I'm new to Cisco switches.
I need to connect two 3750G stacks. One stack consists of 3 x 3750G-48PS and 2nd stack is 3 x 3750G-24TS. Since all switches have 4 SFP ports I would like to use them to create 3 3Gb etherchannels in a full mesh and redundancy.
stack1 Gi1/0/49 - stack2 Gi1/0/25
stack1 Gi1/0/50 - stack2 Gi2/0/25
stack1 Gi1/0/51 - stack2 Gi3/0/25
stack1 Gi2/0/49 - stack2 Gi1/0/26
stack1 Gi2/0/50 - stack2 Gi2/0/26
stack1 Gi2/0/51 - stack2 Gi3/0/26
stack1 Gi3/0/49 - stack2 Gi1/0/27
stack1 Gi3/0/50 - stack2 Gi2/0/27
stack1 Gi3/0/51 - stack2 Gi3/0/27
Is this overkill or am I headed in a right direction? I have only the default VLAN so I understand that only one etherchannel is used for cross stack connection. Will this achieve auto failover?
Fred

Not sure what you mean by "if we brought down the switch hosting it" , if you mean one switch in the stack then you would not lose your connection . The etherchannel would consist of one connection out of each switch in the stack on one etherchannel , the data would continue to flow over the other 2 links in the etherchannel. If you have one etherchannel consisting of one connection out out of each switch in the stack then you have 3 redundant gigbit connections , highly unlikely you would lose all 3 and this simplifies the config by only having one ehterchannel and saves money by not having to buy so many sfp gbics.

ABAP aND Java Stack

Whats the use of an ABAP and Java Stacks in XI? What exactly they are doing for XI?
Thanks.

Hi,
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Ever wondered how and where the XI pipeline gets executed? It happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
Take a look at the XI overview doc to understand this better,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a3d3c390-0201-0010-c490-bd85917138c8
Regards,
Bhavesh

PI Pipeline Doubt : Pipeline Steps in ABAP stack and JAVA stack

Hello
Can anyone please assist me with which stages steps of the PI Pipeline are executed on the Java or the ABAP stack.
Receiver Determination
Interface Determination
Message Split
Message Mapping
Technical routing
Call Adapter
Also can anyone please provide links relating to the PI architecture diagram describing it from ABAP and Java Stack Perspective and not from the Components perspective i.e. Integration Repository and Directory.
Thanks.
Kiran

Hi
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Most of XI pipelines happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
Message, Java & XSLT (under Imported Archives) mappings are executed at Java stack;
ABAP & XSLT (in ABAP stack) mappings are executed at ABAP stack.
PI Architecture look threads
Architecture
/message/5802842#5802842 [original link is broken]

Java and ABAP Stack

Hi All,
I am still not clear about role/function of java and abap stack in XI.
Can anybody explain?

Sireesha,
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Most of XI pipelines happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
please go through links::
ABAP and JAVA in Netweaver stack
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/4aa47d27-0a01-0010-5db4-bb62dfc8c069?prtmode=navigate

Stacked Bar Chart - Values of the Bar

Hi,
I have a stacked bar chart with columns as "Project Name", Rows as "Stages", and measures as "Cost". I have different stages in the X axis and the Projects are stacked for each stages. When I scroll my mouse over the stacks it shows me the "Cost" of the project. Is there a way I can show both the "Project name" and the "Cost", when I roll my mouse over the stacks?
Thanks for your time and help.

Hi ssk,
I assume its 10g and is this what your looking for http://obiee101.blogspot.com/2008/01/obiee-xy-and-data-in-mouse-over-label.html
UPDATED POST
It is the same procedure for bar charts...You need to play with it,never i had this requirement....give a try
Cheers,
KK
Edited by: Kranthi.K on Jun 27, 2011 8:40 PM

Stacked Column Chart with Lines

Requirement:
User stacked Column chart to display data for defects for 4 departments.
1 or 2 lines to show baseline for defects(constant).
Is there anyway that I can do that just like we can create one in Excel?
(stack a Stacked column chart with a line chart is not a solution.)
Any advises?
Thanks,
Wen

Hi Wen,
I realise that you are not going to get this to work with a standard component on its own. I think it might be possible to acheive it with overlaying barcharts and combination charts.
My assumption is that you are looking for something that has a stack with 3 separate items in it. Two target lines crossing over the stacked chart.
I will have a look at this to see if I can come up with something. Let me know if this is not your requirement.
No, I don't work for SAP. I think those that do have the SAP logo beside them.
Regards
Alan

Is there a way to sort subfolders in stacks by kind?

I would like to sort the subfolders in my document stack by kind. I know that I can right click on it and choose "sort by --> kind" but this only does it for the opening folder. As I get deeper into subfolders it only sorts by name and will not stick to my "sort by kind" preference. Any way to fix this?
Thanks.

Thanks for the response Camino fan.
Unfortunately setting these preferences in the finder haven't carried over into stacks on the dock. My finder organizes by kind as you described, but even after doing so, the stacks continue to sort by the default (name).
Any other ideas?

Customising Stacks

Under 'Document Stacks' we read the following: 'To customise a stack, position the pointer over the stack icon and hold down the mouse button until a menu appears.' This does not work, at least it does not work with the mousepad on my macbook pro. Do I need to use a cable/wireless mouse. I am away from home at the moment and don't have a mouse.
Thanks
Eric

Ha good computing! Here is a very nice trick if you are feeling adventurist, to enable *stack highlighting*.
You only need to execute these two lines of *Terminal commands* to make it happens <code>copy and paste what is in-between here</code>:
<code>defaults write com.apple.dock mouse-over-hilite-stack -boolean YES</code>
<code>killall Dock</code>
ref: http://www.usingmac.com/2009/9/7/daily-trick-37
This is very sweet addition to the experience.
cheers!
Message was edited by: leroydouglas

Text to Speech - cursor over to talk instead of selecting text?

I typically use TTS in Chrome and select the text, right click and select speech. I know there's a keyboard shortcut instead of right clicking, but is there a way to make TTS work like Narrator in WIndows 8? There, you put the cursor over the text and it automatically starts talking, which is less cumbersome.

It turns out that speech is not completely broken. I was able to fix this by recreating the disfunctional slides from scratch in the latest Keynote and OS X. Particularly affected were the slides that had complicated builds. It was an annoyance but got the job done.
At the link that I provided above are two links. You evidently downloaded the Self-Presenting Presentation (the first link) but did not download the Self-Presenting Keynote file (the second link). Once you do so you will be able to open the presentation in Keynote and dissect how the tags were applied.
I see no way to export that Keynote Presentation to Quicktime so that it includes the voice over. I was able to accomplish this by using SnapzPro. See http://www.ambrosiasw.com/utilities/snapzprox/. This is also a must have application if you want to produce video podcast.
This morning I got the presentation that I was working on up to my .Mac site. You can view it at http://web.mac.com/igot2n0/McFatterTechnicalCenter/Orientation.html.
One other problem that I encountered is that this text to speech method does not allow slides that DO NOT have voice over narration but consist of builds. The intro slide and the last two slides of the presentation were exported to Quicktime separately and later added to the main presentation that I exported using SnapzPro. It seems that this is a feature that could be easily added in later revisions. If Apple does not include it in a later revision, I will keep doing it the way that I did in this presentation.
TC

Ip over dcc, stack consists dcc, hdlc,ppp,clnp,ip

Similar Messages

Maybe you are looking for