IP profile changed and interleaved on

can someone help as help desk not much help.
my ip profile seems to be stuck on 250k and i have seen that the latency has changed to interleaved. i am on a long line i know but my speed was 700k and latency was on fast its about 94ms at the moment not good for gameing.

i know its not been connected for long i rebooted the hub, but the stats have been like this for weeks now.
Line state Connected Connection time 0 days, 0:00:18 Downstream 736 Kbps Upstream 192 Kbps ADSL settings VPI/VCI 0/38 Type PPPoA Modulation ITU-T G.992.1 Latency type Interleaved Noise margin (Down/Up) 6.8 dB / 7.0 dB Line attenuation (Down/Up) 63.5 dB / 31.5 dB Output power (Down/Up) 14.9 dBm / 12.0 dBm Loss of Framing (Local) 27 Loss of Signal (Local) 2 Loss of Power (Local) 0 FEC Errors (Down/Up) 0 / 0 CRC Errors (Down/Up) 0 / 2147480000 HEC Errors (Down/Up) nil / 0 Error Seconds (Local) 2870 Hide Details
FAQ
<script type="text/javascript">// // <![CDATA[ paintProgressAndMessageOnBar(100,"The test has successfully completed"); // </script> Test1 comprises of Best Effort Test: -provides background information.
Download  Speed
223 Kbps
0 Kbps
250 Kbps
Max Achievable Speed
 Download speedachieved during the test was - 223 Kbps
 For your connection, the acceptable range of speeds is 50-250 Kbps.
 Additional Information:
 Your DSL Connection Rate :0 Kbps(DOWN-STREAM), 0 Kbps(UP-STREAM)
 IP Profile for your line is - 250 Kbps
If you wish to discuss these results please contact your ISP.
If you are experiencing problems with specific applications, servers or websites please contact your ISP for assistance.
Your test has completed please close this window to exit the performance tester.

Similar Messages

  • Oracle user .profile change and running Database

    We have 1 Oracle Database (9i) running on AIX Server for long time. Now we are making some room to create second database. We would like to make change to Oracle User .profile , so it would prompt to specify ORACLE_SID upon login under oracle to UNIX. Also we would add new entry in oratab for new database. However we will not be creating this database for another couple of weeks. Could this cause some trouble for currently running Database? Could existing backup jobs, stats job and other monitor jobs fail on existing running DB?
    Let me know if you need more information to help us on this question

    This is very unlikely, though it would depend on how you developed the jobs you discuss. Without these jobs: no problem.
    What I do with multiple databases on Unix boils down the following.
    In /etc/profile, I set up a env var DEFDB
    In .profile of Oracle I set ORACLE_SID to the value of this DEFDB, and I set
    ORAENV_ASK to "NO". I run oraenv (which is in /usr/local/bin), and I leave ORAENV_ASK set.
    I don't want oraenv asking for a database during login, and I want to issue
    export ORACLE_SID=<some value> prior to running oraenv manually.
    Sybrand Bakker
    Senior Oracle DBA

  • Profile changed and mac mail wont send..

    i ahve a name macdoodle bu t now its chnged to alreadyhaveone
    how do i get my orignial back..
    please email [ Edited by Host, No personal information please. ]
    i need to ask why allmail staring to ahng up in outbox of mailbox.
    i set one server up to port 25 and one to port 587 and still,
    right now 4 messages sitting..
    anyhting to be done?

    Hi alreadyhaveone a.k.a. macdoodle!
    Is this your User Profile: macdoodle?
    I suspect that you created a new account when you tried to log in.
    What happens when you log in with macdoodle?
    ali b

  • HR PA and Planning (PD profile) changes not updating auth profiles of users

    PROBLEM:
    We are on ERP version 6 since 2008.  We started experiencing this problem December last year and now it is all over our system.  As soon as employees are transferred or new appointments are made in HR on PA or if the PD profile is changed in planning the changes cannot be seen by the user in their auth profile.  The user can literally not see the newly appointed employee on the org structure or even newly created org units and positions are not visible.  When RE_RHAUTH00 is run on the user name the update indicates that the changes (new employee and new org unit) is linked. 
    The following updates run every night:   RHPROFL0_DAILY_UPDATE and RHUATUPD_NEW.  I have also run PFUD during the day to make sure all updates go through.  We have also "played" with some profiles with PD profile changes but it is as if the profile remains completely static.  We have looked for personnel lists and deleted them to no avail.  Our Basis administrator has cleared the buffer for us and has run report RSUSR405 that did not do anything.  We have searched through notes on Support packages and have just loaded and tested support pack 46 to 53.  The only work around seems to be to delete the user and create a new user and then it seems to easily accept new changes.

    Hi,
    Yes, please make it scheduled background job. This is normal procedure.
    Define periodicity on your business needs: some run it every night, some every hour.
    Cheers

  • Lost User profile, permission changes and screwed up Time Machine.

    Hello.
    I have had a pretty nasty 24 hours as my 6 week old MacBook Pro went down yesterday and I nearly lost everything.
    My mac had gone to sleep while I was eating my christmas dinner and for some reason I had to hard restart a couple of hours later as it wouldn't respond. When it came to the log-in screen, my admin user account had disappeared so I logged in to my wife's admin profile and could see my user profile was still there under 'users' with the rest of the accounts. All permissions had been changed and I was locked out of everything.
    I then proceeded to repair permissions and then boot from the Leopard DVD disc and nothing was happening to bring my user back. I couldn't add another admin user as it was reporting my hard drive as 0k available and not enough space to proceed.
    I then found out that my Time Machine backups were screwed as well but I could still see the data (thank god) and have just re-installed Leopard, hesitantly, and manually transferred data (photos, work, etc) from the Time Machine external hd.
    Has anyone experienced any of this behaviour with their machines? Should I be concerned because I have no faith in 10.5 at the moment after this.
    The last thing I installed was the security update released mid-December.
    Can anyone shine any light on what might have gone wrong?
    Kind regards.
    Damian.

    Left for a year and it went unanswered.
    I've moved on in my life since.

  • My old email is not anymore existing.It was my Apple id. I updated my profile changing enail and password. Unfort. my Iphone did not update my profile and then I can not use my account by it. how can I do to reset my profile on IPhone4

    My old email is not anymore existing.It was my Apple id. I updated my profile changing enail and password. Unfort. my Iphone did not update my profile and then I can not use my account by it. how can I do to reset my profile on IPhone4

    Settings > iTunes and App Store > Apple ID > Sign Out > Sign In with the current Apple ID
    Settings > iCloud > (Scroll Down) Delete Account > Sign In with the current Apple ID

  • Mac system and profile changes

    Hi there,
    I have just purchased a second hand laptop through my family. I want to wipe all the information off it, including the previous owners name and profile etc. and start it up with my information. Please specify how I should go about doing that?
    Thanks

    Clean Install of Snow Leopard
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
         5. If you are planning to sell or give your computer away, then do the following:
            After you reformat your hard drive and reinstall OS X, the computer restarts to a
            Welcome screen and asks you to choose a country or region. If you want to leave
            the Mac in an out-of-box state, don't continue with the setup of your system. Instead,
            press Command-Q to shut down the Mac. When the new owner turns on the Mac,
            the Setup Assistant will guide them through the setup process.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • ADSL keeps switching between 'fast' and 'interleav...

    Hello
    I wonder if you could tell me if there is some reason why my line profile / ADSL latency keeps being switched between 'fast' and 'interleaved'. Everytime it is switched from interleaved to 'fast' I lose download speed. It has just changed again today and as a result my download speed has (according to my BT Home Hub Manager) dropped from 6.3MB (yesterday) to 3.2MB (now). Is it possible to have the line profile left as 'interleaved' so that I can enjoy the extra download speed ?
    Thanks for your help.
    Fortinbras
    Solved!
    Go to Solution.

    Hi
    I am sorry to see you are having problems with your BT Service
    I suggest you contact the forum mods they should be able to get interleaving turned on  for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
    They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
    They are a UK based BT specialist team who have a good record at getting problems solved
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Profile picture and status bar don't appear in Game Center

    I first signed up for Game Center when it was released in the days of iOS 4. I used my iPod Touch 2nd gen. There was no status bar or profile picture, but I didn't realize because I was new. I later changed to an iPhone 3GS when iOS 5 was released, and the iPhone was restored to the backup of my iPod Touch. After my iPhone was fully functioning, I retired my iPod Touch. I noticed then that I was missing the profile picture and status bar because my Game Center friends had them. In December 2011, I bought myself an iPad 2 Wi-Fi. Still, no profile picture or status bar. I am confused, because my iPhone and iPad are running the latest version of iOS, 5.1.1. I have done plenty of troubleshooting, with no answer. Please help me.

    Yeah, my internet is on and working too. I have been looking in to this issue- I have emailed Apple to make them aware. It seems like it is affected most, if not ALL tbe Game Centers on 2nd Gen and from what else I've heard, 3rd gen devices too. Whether this is intentional I don't know- it seems odd that everyone has suddenly been disconnected from their games tab on Game Center older devices, so perhaps it is a ploy by Apple to ensure more people switch to a newer device? We'll see. For now, I would recommend you follow the posts I've put up previously too. See my profile for my contributions.
    Thanks, and add me on Game Center if you like.

  • Background job fails for BDC profile creation and role assignment

    Hi Experts,
    I have created a BDC Function module for Tcode 'PFCG' for profile creation and role assignment, and called this FM in my zprogram. the problem is that when i run this program in foreground it executes succesfully, but if i schedule it in background it fails throwing error in job log 'Role 'Z...' does not contain any active authorizations'. But i have created one more program to create authorization objects which runs before this zprogram.I have also checked the authorization object in 'RSECADMIN', it reflects active. I dont understand whats happening exactly when it runs background.
    Below is the process of job
       1. ZMIS_AUTH_OBJECT_CREATE
           Variant : auth-create
       2. ZMIS_AUTH_ASSIGN_TO_ROLE
           Variant : auth-assign
    The problem is in second program, runs in foreground but fails in background.
    Code which i have written in my second program
    ***BDC for Profile creation and assignment to Roles
        CALL FUNCTION 'ZROLE'
          EXPORTING
           ctu                     = 'X'
           mode                    = p_mode
           UPDATE                  = 'L'
    *   GROUP                   =
    *   USER                    =
    *   KEEP                    =
    *   HOLDDATE                =
           nodata                  = '/'
            agr_name_neu_001        = wa_role-role_name
            text_002                = wa_role-desc
            text_003                = wa_role-desc
            text_004                = wa_role-desc
           value_01_005            = 'T-ML330881'
            h_fval_low_01_006       = wa_role-auth
            profn_007               = lv_profile
            ptext_008               = lv_text1
    * IMPORTING
    *   SUBRC                   =
         TABLES
           messtab                 = temp_message.
    ***Generation of Profile created
    CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
         EXPORTING
           activity_group                      = wa_role-role_name
    *     PROFILE_NAME                        =
    *     PROFILE_TEXT                        =
          no_dialog                           = ' '
          rebuild_auth_data                   = ''
          org_levels_with_star                = ' '
          fill_empty_fields_with_star         = 'X'
          template                            = ' '
          check_profgen_tables                = 'X'
          generate_profile                    = 'X'
          authority_check_pfcg                = 'X'
       EXCEPTIONS
         activity_group_does_not_exist       = 1
         activity_group_enqueued             = 2
         profile_name_exists                 = 3
         profile_not_in_namespace            = 4
         no_auth_for_prof_creation           = 5
         no_auth_for_role_change             = 6
         no_auth_for_auth_maint              = 7
         no_auth_for_gen                     = 8
         no_auths                            = 9
         open_auths                          = 10
         too_many_auths                      = 11
         profgen_tables_not_updated          = 12
         error_when_generating_profile       = 13
         OTHERS                              = 14  .
    Experts please help me out its very urgent. your help is appreciated and rewarded. Thanking you in advance.
    Regards,
    Chetan

    Hi Praveen,
    Yeah definately, my requirement is that I have to access of some BI reports to certain users, so contract data will be downlaoded from ECC on application server, need to read that file from application server and for the each contract i ahould create a authorization object, role creation and assigning of role to the user and profile generation and activation.
    To achieve this i have written two programs
    1) ZMIS_AUTH_OBJECT_CREATE- This program will create the Authorization Object using BDC and Role creation Using the BAPI
    "" Creation of Authorization Object
    CALL FUNCTION 'ZAUTHOBJ'
            EXPORTING
             ctu                    = 'X'
             mode                   = p_mode
             UPDATE                 = 'L'
    *   GROUP                  =
    *   USER                   =
    *   KEEP                   =
    *   HOLDDATE               =
             nodata                 = '/'
             g_authname_001         = 'ZDUMMY_MIS'
              g_targetauth_002       = wa_tab-auth
              g_authtxt_003          = wa_tab-short_desc
              g_authtxtmd_004        = wa_tab-med_desc
             marked_04_005          = 'X'
              g_authtxt_006          = wa_tab-short_desc
              g_authtxtmd_007        = wa_tab-med_desc
             tctiobjnm_04_008       = 'ZBUS_UNIT'
              g_authtxt_009          = wa_tab-short_desc
              g_authtxtmd_010        = wa_tab-med_desc
             marked_05_011          = ''
             opt_01_012             = 'EQ'
              low_01_013             = wa_tab-bu
              g_authtxt_014          = wa_tab-short_desc
              g_authtxtmd_015        = wa_tab-med_desc
             marked_04_016          = 'X'
              g_authtxt_017          = wa_tab-short_desc
              g_authtxtmd_018        = wa_tab-med_desc
             tctiobjnm_04_019       = 'ZCONTRCT'
              g_authtxt_020          = wa_tab-short_desc
              g_authtxtmd_021        = wa_tab-med_desc
             marked_05_022          = ''
             opt_01_023             = 'EQ'
              low_01_024             = lv_contract
              g_authtxt_025          = wa_tab-short_desc
              g_authtxtmd_026        = wa_tab-med_desc
              g_authtxt_027          = wa_tab-short_desc
              g_authtxtmd_028        = wa_tab-med_desc
              g_authname_029         = wa_tab-auth
    * IMPORTING
    *   SUBRC                  =
           TABLES
             messtab                = temp_message.
    "" Creation of role
    LOOP AT it_role INTO wa_role.
          CLEAR wa_text.
          wa_text-text = wa_role-desc.
          wa_text-langu = 'E'.
          APPEND wa_text TO it_text.
          wa_jobrole-agr_name = wa_role-role_name.
          wa_parentrole-agr_name = 'ZM_CT_DUMMY_MIS'.
          wa_method-usmethod = 'CHANGE'.
          CALL FUNCTION 'ZBAPI_JOBROLE_CLONE'
            EXPORTING
              jobrole          = wa_jobrole
             parent           = wa_parentrole
             method           = wa_method
           TABLES
    *   RETURN           =
             shorttext     = it_text
    *   LONGTEXT         =
    *   MENU_NODES       =
    *   MENU_TEXTS       =.
        ENDLOOP.
    2) ZMIS_AUTH_ASSIGN_TO_ROLE - This program will generate the profile created assign it to the role.
      ""*BDC for Profile creation and assignment to Roles
        CALL FUNCTION 'ZROLE'
          EXPORTING
           ctu                     = 'X'
           mode                    = p_mode
           UPDATE                  = 'L'
    *   GROUP                   =
    *   USER                    =
    *   KEEP                    =
    *   HOLDDATE                =
           nodata                  = '/'
            agr_name_neu_001        = wa_role-role_name
            text_002                = wa_role-desc
            text_003                = wa_role-desc
            text_004                = wa_role-desc
           value_01_005            = 'T-ML330881'
            h_fval_low_01_006       = wa_role-auth
            profn_007               = lv_profile
            ptext_008               = lv_text1
    * IMPORTING
    *   SUBRC                   =
         TABLES
           messtab                 = temp_message .
       COMMIT WORK AND WAIT.
    ""*Generation of Profile created
      LOOP AT it_role INTO wa_role.
        CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
         EXPORTING
           activity_group                      = wa_role-role_name
    *     PROFILE_NAME                        =
    *     PROFILE_TEXT                        =
          no_dialog                           = ' '
          rebuild_auth_data                   = ''
          org_levels_with_star                = ' '
          fill_empty_fields_with_star         = 'X'
          template                            = ' '
          check_profgen_tables                = 'X'
          generate_profile                    = 'X'
          authority_check_pfcg                = 'X'
       EXCEPTIONS
         activity_group_does_not_exist       = 1
         activity_group_enqueued             = 2
         profile_name_exists                 = 3
         profile_not_in_namespace            = 4
         no_auth_for_prof_creation           = 5
         no_auth_for_role_change             = 6
         no_auth_for_auth_maint              = 7
         no_auth_for_gen                     = 8
         no_auths                            = 9
         open_auths                          = 10
         too_many_auths                      = 11
         profgen_tables_not_updated          = 12
         error_when_generating_profile       = 13
         OTHERS                              = 14
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDLOOP.
    For creating authorization objects, role & profile i have created one dummy auth, dummy role & dummy profile respectively.
    i have created dummy objects to copy the roles from dummy object and assign the same to new Auth obj, role & profile.
    Let me know what needs to be done. because these both the programs run perfectly in foreground, but fails in background.
    Regards,
    Chetan

  • Edit User Profile How do I enalble user lo loggin to their own profile page and edit it?

    Hi
    I am having some problems....... any help would be nice
    I am using DWCS3 and ADDT toolbox extension wamp and phpmyadmin
    I am trying to create a site for people to be able to post a profile with a picture and info and display it in a dynamic table.
    I can create the form, a database and display the data on another page in a dynamic table all ok..... kind of.
    I can create a user registration system with ADDT.
    I can redirect them after registration to a post profile page, which has a form to upload details. I can then display those details on a user info page.
    I would like to allow logged in users to be able to click on a link to their own profile page , which would show the same form that was filled out in the post profile page, but would be already populated with their previously entered information. I would like users to be able to edit the content of the form and update the information in the database and automatically delete delete any previously entered information ( only in the fields that have been edited)
    How do I go about doing this?.... step by step?
    I want to allow logged in user to view their own profile not every bodies.... how do I do that?
    I have read on another post that to do something similar to this I should filter my database information using a session varialble MM_username that I think is created automatically after user logs in .... but I don;t know how to do this.... I really don;t understand is this the way I link my user to a page that only displays their info ? or is there another way?
    I would also like to allow only people who have posted a profile to be able to edit profile ...... do I do that by
    1. new user registers and is redirected to login page
    2. user logs in and is redirected to an index page that has a post profile button and a edit profile button but only the POST button is active ( and links to a form to post info ) and the edit profile button is linked to a " You must post a profile first" page ( with a link back)
    3 so user posts profile and is directed to an index page which has an edit profile button which is now linked to an edit profile page
    Does that sound correct?
    Any suggestions in getting all this to work would be much appreciated

    Hi Yomi,
    I have created the users page which submits to a members page and tell the user to edit biodata, profession, and hobbies. but on clicking I am really confused on how the id will be transfered from the members page to update biodata and the user updates the form which will show past records. this should also apply to the profession and hobbies
    If I understand this right, you might want to consider providing a complete "userdata" section which comes with a Dynamic List and a Dynamic Form to have users add & update their data plus (via the Dynamic List) track all past records
    Lastly is it possible I create recordset at will and the id will be passed thru since kt-login-id behaves sololy
    I really can´t recommend this "pass user_id as URL variable" approach in this case, as URL variables are displayed in the browser´s address bar -- and this is absolutely insecure, because anyone could simply change the displayed "user_id" value, reload the form and hence edit data which belongs to a different user.
    The only secure method is indeed to use ADDT´s session variable kt_login_id
    Fatal error: Call to undefined function: var_export()
    Not sure, but maybe some "includes" files haven´t been generated
    Cheers,
    Günter Schenk
    Adobe Community Expert, Dreamweaver

  • SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

    Hi,
    I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
    "An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
    I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
    Thanks in advance.
    Poomani Sankaran

    Hi Poomani,
    Thanks for posting your issue,
    you must have to Install SQL Server 2012 ADOMD.Net  on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
    http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section

    Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section
    I used Colormunkie Photo to create an .ICM file for printer calibration.   When that failed I tried changing the suffix to .ICC.  Under neither circumstance did LR4.2 display the file in the menu to select printer profile.  There were several display files with both suffixes but no printer files at all.  I tried three times with no success and cannot think of what else to try. The first two were the same.  I varied the file creation name suffix in the third.  Help will be appreciated. My OS is Win 7 ultimate SP1  Printer is HP 2550L laserjet.

    Tillman
    Glad you found your answer, Colormunki is smart enough to figure out the color space for the printer as I found out - But for quality work the latest generation of inkjet printers from Epson and Canon are hard to beat, and compared to a laserjet the quality is like night and day. The other benefit of changing up to an inkjet printer is the choice of papers available which you could not put through a laserjet.
    I had a colleague that tried printing on Photoglossy paper through his color laser and it fried the fuser, and HP, while they replaced the fuser unit under warranty, made it very clear that that was a daft thing to do.
    So if I were in your position I would go with an inkjet and you will then enjoy the benefits of better quality output, better paper choices and with your Colormunki be able to make custom profiles that will work in LR
    Cheers
    Mike

  • Finder/Window-Content not responding to changes and doesn't refresh

    Hi,
    i have a very strange Problem with the Finder since i upgraded to 10.6.4. The Finder doesn't react to changes from certain Applications.
    I noticed the effect in the Folder 'Downloads', f.e. if i try to download a file. Usually two files appear, the intended file with 0 kB and another temporary file. After the download is complete the temporary file will be deleted and only one file remains.
    Usually the whole process is visible and shown in the finder window. After the update it isn't which means that if i download a file, the Window content does not reflect the changes and the new files are not shown, even after the download is complete. To see the new files i have to trigger a change, either by creating a new folder or by changing the location (moving up a level).
    Interesting enough this only happens with certain Applications like Firefox or 'the Unarchiever' (a compression tool). If i download a file with Safari the temporary files and the downloaded files are shown in the window content without manually triggering a change. If i use 'keka' (another compression tool) the changes are also immediatly shown.
    In order to narrow down possible errors i have taken different approaches:
    a) i intently scanned and watched the console and read all error reports. There are no errors shown (with firefox or the unarchiever).
    b) I created a new user profile and the effects are the same.
    c) i ran 'disk utilities' and scanned the Access priviliges. Apart from the common problem within /system/java/... there are no problems
    d) i ran 'onxy' to clean the user and system cache. I rebuild the LaunchService Database.
    I didn't fix my Problem.
    That leads me to conclude that the problem is located in some system-function which is correctly triggered by some applications and apparently not by others.
    My Questions:
    1. Does anyone else has this problem and possibly a fix?
    2. Does anyone know how the finder is triggered by applications in order to refresh a window?
    tia,
    jc

    Hi Jeanclaude,
    You've described the problem well and took some excellent troubleshooting steps
    b) When you created the new profile, were you still engaging your third party apps, or are they installed in log-in items?
    1. It would be interesting to try a Safe Mode startup (It will take more time to startup in Safe Mode because it runs a directory check.)
    2 If step 1 doesn't turn up anything, re-install from your 10.6.x install disk (10.6 has the ability to "install in place" without touching anything other than system specific files.) Just pop in the disk, double-click and follow the prompts. Remember to uncheck language localizations if you don't use them & Printers except the one/ones you use.
    Let us know your results after these 2 steps.
    -mj

  • Trying to understand "User/Role/Profile Synchronization" and Batch Analysis

    Hello,
    Im trying to understand what exactly and from which tables these jobs are copying to which tables in CC. I have a understanding that these jobs are moving also deleted roles from backend. This is causing unnecessary delay to long lasting job. 
    I would appreasite if some one could explain the logic behind these jobs. What the fullsync and incremental is reading ? What kind of changes are causing a role/user/profile  to be included to the full and incremental jobs?
    How the incremental analysis logic is built ?
    br Janne

    Janne,
    In my current implementation we are going for an offline risk analysis due to the heteregoneus system landscape of our client (several SAP and non SAP systems and several SAP systems under 4.6C). Eventhough within our approach we don't perfrom the backend synchronization (we use CC data extractor to pull data from backend into CC) hope the following info could hel you:
    The tables such jobs you mention access to, are all the SAP backend system tables related with users, roles, profiles, action and permissions. If you check the data mapping appendix of the "user and configuration guide for 5.2" you will see all the data that CC retrieves. For instance, in order to extract user info (UserID, FName, LName, Email, Phone, Email, Department) tables USR21, USR02, ADRP, ADR6 and ADCP must be accessed.
    In terms of CC tables:
    VIRSA_CC_SYSUSR >> UserIDs and Systems ID relationship
    VIRSA_CC_GENOBJ >> User, Role and Profile master data
    VIRSA_CC_GENACT >> User-action, role-action and profile-action data
    VIRSA_CC_GENPRM >> User-permission, role-permission and profile-permission
    VIRSA_CC_SAPOBJ >> Action-permission
    VIRSA_CC_OBJTEXT >> Objects descripcions (ACT, PRM, FLD, VAL, ORG)
    Hope this helps.
    Regards,
       Imanol

Maybe you are looking for

  • Credit Memo for Returns PO

    Hi, I've created a PO with two items.  One normal item and one return item and posted the GR and IR.   The invoices was paid also. Due to some reasons I want to reverse the originally posted invoice.  Since it's paid and cleared, system would not all

  • Vendor master payment terms

    Hi, I would like users to maintain same payment terms in vendor master Purchasing and company view So i would like system to copy payment terms maintained in one field to other field or vise versa Are there any std.settings available for this? or any

  • PI / XI content for SAP APPL 6.04?

    Hi guys, I would like to use the Business Partner functionality (create, read etc) in SAP PI 7.1. We currently only have PI content for SAP APPL 6.03.....but the SYNCHRONOUS interfaces I really want are in SAP APPL 6.04. Here are the interfaces I nee

  • Spry vs. PVII

    What to use..... the new Spry pop menu scheme or PVII Pop Menu Magic? Pros and cons??

  • Need help creating multiple albums on web page

    I have created a website using the about me template which comes with 3 albums on on the template. It seems that only the first album is hyperlinked to another page but the other two are not. Am I correct or am I doing something wrong. Is there a way