Ip profile dropped again

further to a previous post,where my  ip profile had dropped to 135 kbps giving extremely low download speed.After ringing  bt broadband help it went up to 1500kbps for one day only giving  good download speed ( for me ) of 1.4 mbps. IP profile has now dropped back to 1000kbps and download of 877kbps. I'm disaapointed after my initial euphoria at the improved speed. Is such an IP profile reduction normal or should I get back on to bt. The fact i had a 1500kbps profile for one day means my system and lines are ok. Any advice welcome.
Solved!
Go to Solution.

Just leave your connection alone no restarts for 3/5 days and your profile should rise again to 1500k
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

  • Another IP Profile Dropped

    Hi
    Seems to be a pattern emerging of people slowing down due to ip profile drops and im the same.
    On infinity 2 i used to get the full speed ie 70+mbs down and 19 mbs up.
    I have had a few restarts 2 weeks ago due to a power cut ... then i had some electrical work don in the house so power was on and off etc.
    Then had a firmware updaye on my modem ( Asus-DSL AC68U ) which again needs restarts etc.
    How ever my conection has been solid for nearly 14 days with very very low crc errors but im stuck with an ip profile of 49mbs and now Interleaved instead of FastPath.
    I have read before it can take 10 days to settle and then should creep back up over the next few days / weeks but this doesnt seem to be happening.
    My line is very quiet so no problems there.
    I was told by BT India that my ip profile is low because im on wireless and should change my wireless channel and itll go back up to 70mbs again   How on earth does the channel im on cause my ip profile to drop???? Its not as if being on the wrong channel causes a router restart . They must think people are stupid and just tell you anything to get rid of you.
    I use Insidder and can see the wireless networks around me and im the only one on 5Ghz band and the signal has no noise.
    Even testing on a wired connection gives the same results.
    Anyway how long do i have to wait to get my full speed service again instead of paying full price for whats now a slower service ??
    I will add a screen shot of my router stats . 

    Proz wrote:
    Anyway how long do i have to wait to get my full speed service again instead of paying full price for whats now a slower service ??
    it does look like it's due to all the resyncs. I had something similar around 5 weeks ago - a fault in the cabinet caused multiple failed resyncs over a 4 hour period and DLM applied interleaving the next day. US interleaving was removed after 15 days but I'm still waiting for DS interleaving to be removed 3 weeks later. Line is stable with only one or two Errored Seconds per hour.
    I'm afraid it's just a waiting game...

  • IP Profile Dropped

    Had this problem a few times now and even though this time it isn't as bad it's still dropped again and i would be appreciated if it could be reset for me
    Download speedachieved during the test was - 4.68 Mbps
     For your connection, the acceptable range of speeds is 0.6 Mbps-7.15 Mbps.
     Additional Information:
     Your DSL Connection Rate :8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 5 Mbps
    Normally i'm hitting above 7mbps for my profile however it has now fallen to 5.

    My profile has risen but my DL speed has dropped down to 3 and i can't understand why. Not downloading or streaming anything and it's just getting lower. Anything you can see thats causing this? Also my ping is all over the place and my DL speed is anywhere between 2 and 4.
    Download speedachieved during the test was - 3.08 Mbps
     For your connection, the acceptable range of speeds is 0.6 Mbps-7.15 Mbps.
     Additional Information:
     Your DSL Connection Rate :8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 7.15 Mbps
    ADSL Line Status
    Connection information
    Line state:
    Connected
    Connection time:
    6 days, 12:50:58
    Downstream:
    8,128 Kbps
    Upstream:
    448 Kbps
      ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    7.1 dB / 21.0 dB
    Line attenuation (Down/Up):
    23.5 dB / 12.5 dB
    Output power (Down/Up):
    20.2 dBm / 12.3 dBm
    FEC Events (Down/Up):
    0 / 277
    CRC Events (Down/Up):
    7655 / 395

  • Device Group Profile Drops after changes are saved

    Why do Device Group Profiles drops after applying a change? Some will get it no problem but some lose the profile thus losing network connectivity then requiring manual intervention.

    Thanks to all who replied, however..
    If the settings were stored int he CPL file ( which would be very odd but there it is ) I would expect that I could create a CPL file with the settings I want on one computer, and copy them to the same folder on another computer whose settings I want to standardize in the domain, however, this does not appear to be the case. I copied the entire ..\Program Files\Quicktime folder from one computer which had the settings I wanted, to another computer which didn't. The settings did not follow the copied Quictime folder and contents, so, with all respect and gratitude due to those who replied, I don't think settings are stored in the CPL file or any other file in the Quicktime folder.
    In any case, I don't really care where they are stored, I just need a way to propagate a single set of settings across multiple computers in a domain. I've never run across an application before that was so reistant to this type of thing...
    Thanks again
    TimeTraveller..

  • BRAS profile stuck AGAIN =(

    Very close to my exchange and regulary get near full 8Mbps from a very stable connection.
    Looks like this weekend has seen my bRAS profile stuck AGAIN! =(
    Speedtest results
    Now the last time, took an age for the first line of BT tech "help" - so I thought I'd see if there was a less stressful way to get it fixed.
    Any suggestions from the community?
    Solved!
    Go to Solution.

    profile will only change if you have problems with connection and connection drops.  the reason for the 3+ days connection is to ensure that line is now stable to avoid the same thing happening next again day and the automatic system should correct the profile in that timescale.  normally if you drop connection and connects back at lower speed profile will drop almost immediately to correct value for current speed but when speed reverts back to 'normal' the profile on adslmax 20CN can take 3/5 days to increase.
    the mods are the certain way to get profile fixed but you can try others
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • I can hear people on call but sometimes they can't hear me, it maybe fine for afew mins but then sound drops again? Anyone have this problem and find a solution? Thanks.

    I have an Iphone 4 13.5 GB, iOS 7.1.2. Currently when I make a call or someone calls me, I can hear people on call perfectly but sometimes they can't hear me. It maybe fine for afew mins but then sound drops again? Anyone have this problem and find a solution? Thanks.

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • Profile stuck again...

    Ok..the electric blinked a couple of times this morning in the torrential rain...profile stuck again..I'm fed up to the teeth with this s**t...
    CraigS (one of the mods) emailed me yesterday to inform me that my profile was being "rebuilt" (whatever that means)...everytime I even have the slightest resync my profile is stuck on the banded 2000kps and has to be manually reset...
    Download speedachieved during the test was - 1845 Kbps
     For your connection, the acceptable range of speeds is 400-2000 Kbps.
     Additional Information:
     Your DSL Connection Rate :4640 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 2000 Kbps
    It's giving thunder for Thursday so, no doubt it will be another disaster...can I have it reset please?
    BTW...why is DLM CONSISTENTLY failing?

    Thanks for the answer Craig...I have had a long term problem with REN...after spending much time on this forum debating it with a certain RogerB, we decided it was caused by an ovehead mains  11kv line which supplies a steel manufacturing business...this line (switches ?) at times and the hum from from it interferes with my broadband..
    Like this Daily...[IMG]http://i858.photobucket.com/albums/ab141/dolmenman/Rx_Noise_margin_dB-2010Apr30-1533.jpg[/IMG]
    Unfortunately, I'm not rich enough to take on the power company (or the structural steel works) so when my noise margin (ineveitably) rises to 15+dB I forcibly reduce it with a telnet cmd using the routers broadcom chip...
    Normally by balancing the two (with a 8dB over head on a 53dB loop lose line) I can maintain a 4500kps+ sync for weeks..
    If, on accasion, have have a powersupply issue, or a thunderstorm, I can usually "twiddle" with things and be back to a 3-4 meg connection in 12-36hrs
    Unforunatelly, I no longer seem to be able to do this as ANY disconnect IMMEDIATELY puts me on the 2 meg banded profile...
    PS..we need RogerB back on the case

  • Huge speed drop - again!

    A couple of weeks ago I had a huge drop in my connection speed.  I'm lucky enough to normally get somewhere between 11000-14000 Kbps (I live pretty near the exchange), then it suddenly dropped to around 2700 Kbos.  I spent about three days in constant conversation with India, an engineer visit was booked, and the speed returned to normal the day before the engineer came, so I cancelled the appointment.  Yesterday, same thing has happened again  as before, Hub (v 1.0) has rebooted itself, speed is down below 3000 Kbps, and just can't face another hour on the phone being forced through all their necessary steps, when I know nothing has changed in my set up and the problem is definitely outside my house.  Is anyone else experiencing this regularly? It;s the third time now in a couple of months after 3 years of really good service.  What can I do? Help!!

    I have had this on and off for the past 2 weeks, and I am getting sick of it...I want to find out how much longer I have left on my contract. I must have spoken to India about 15 times, having been reassured the problems have been fixed on the line itself and the IP profile has been manually changed at their end, and the service should be back to normal within 48 hours, for it to go back down to 8-900kbps downstream.
    The fastest connection I've had in the last 2 weeks is about 4000kbps, for about half a day. This is after me telling them I've had twice this before and my IP profile keeps getting put back down to 250k.
    It's like having a modem. But slower.
    Test1 comprises of Best Effort Test: -provides background information.
    Download  Speed
    221 Kbps
    0 Kbps
    250 Kbps
    Max Achievable Speed
     Download speedachieved during the test was - 221 Kbps
     For your connection, the acceptable range of speeds is 50-250 Kbps.
     Additional Information:
     Your DSL Connection Rate :896 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 250 Kbps

  • Profile dropped after 9 stable months

    OK so I had infinity installed in March and have had a stable 37 meg down and 8 meg up ever since.  My profile according to BT speedtester was 38617k.  I have however got up this morning and seen that my speeds have dropped dramatically (14meg down and 4 meg up).  Looking on the speedtester site my profile had dropped to 15000k, so after a call to India, they identified there was an issue with my line and said it would be fixed in 24 hrs with no need for an engineer to call.
    However I have just had a call from India asking if my speed had improved - it has (now getting 20 meg down 5 meg up - profile set at 21000kl), but still nearly half of what I was getting.  I asked for my profile to be reset to what it originally was and was told an engineer needed to come out tomorrow to resolve this
    I hope they can restore my original profile tomorrow and this isnt the start of any issues - so far I have been impressed by BT.
    Heres hoping?

    Chris,
    Thanks for the reply and the interest.............it went very well back to 37meg down and 8 meg up. The engineer said the culprit was more than likely my old modem (which is one of the first and was due to be swapped out via Kellys in the new year).
    The engineer did say it may be a bit of a battle to get the profile reset as it was over 15 meg and they dont normally do it in that instance, however they did and I am good to go again.
    I have to say this, im really pleased with BT, I know you only tend to hear from people when things go bad, but my experience has been one of efficient service/results.
    Thanks once again - All the best to you and your colleagues/families for the festive period and have a happy and prosperous 2012!
    1TC

  • ITunes won't drag and drop - AGAIN!!

    I have the current iTunes on a MacBook Pro running the current OS
    On several occasions, and now it's happening again, iTunes will not allow me to drag even one, let alone a batch, of tracks within or to playlists.
    It's not because a column is sorted - checked that.
    Just using the trackpad or a mouse - neither works.
    One time an Apple person talked me through removing com.apple.itunes.plist from the Library and that solved the problem.  I have had to do this at least once more since, but it does not help this time.
    A great pain when I am using iTunes to present a playlist and I need to make changes on the fly.

    Lets run down a list of possibilities:
    1) You are using iTunes 6 here, correct?
    2) You did not say whether or not you are running in auto-sync, manual management, or "Enable Disk" mode. If you left it in the default mode as installed (auto-sync), then after dropping your movies into iTunes (or adding them to the Library), simply connect your iPod and allow it to auto-sync (mirror) the current contents of iTunes. (You can also try "Update iPod" option under the File menu, but I have found it unreliable -- possibly owing to "sleeping" iPod.)
    3) Not sure if your reference to "dropping the movie on the iPod" is a reference to the iPod desk icon in manua/disk enabled mode or the iPod "Source" reference/associaed contents list in iTunes. Could you clarify where you are attempting to "drag 'n drop" and/or the selected sync mode of operation in your iPod Preferences.
    4) As to conversion to iPod compatible formats, recommend you stick with MoviesForMyPod and/or iSquint if you are restricted to QT Pro 6 and not sure what settings to use for MPEG4 preset collection/QuickTime Movie full manual mode.

  • IP profile dropped - wait it out or call?

    I've noticed since yesterday that my IP profile has been dropped from around 40Mbps to 20Mbps. Is it worth waiting a couple of days to see if it sorts itself out or should I just call BT and ask them to rectify?

    Hi switch625,
    Thanks for posting. Sorry you're having problems with the connection speed. Can you try running the speed test, including the further diagnostics, and post the results. That'll let us see how it's performing.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Ip profile dropped 10mbps

    My ip profile has been 70.85 since May and all of a sudden the last few days it has dropped to 60 mbps,I originally started on 76 mbps which changed after a few days when it settled to 70.85 and has been fine since may and now it has dropped another 10mbps,something is not right here,can support please look into this.

    Adrian100 wrote:
    Maybe but why has it dropped 10mb when i haven't had any power outages ? Strange im seeing other posts who are complaining they've lost 10mb also,care to comment bt?
    Simple really, it's the bad wheather. Just like you, my Profile has dropped due to the recent wheather conditions increasing noise and the amount of errors on the line. Once the wheather clears, after a week or 2 your line will rise the IP Profile.
    If this helped you please click the Star beside my name.
    If this answered your question please click "Mark as Accepted Solution" below.

  • IP Profile dropped significantly

    Problems started occuring around 3 weeks ago. IP Profile use to be 448 upstream, 8192kbps downstream. Now the numbers have significantly dropped too 192 Kbps Upstream, 4224 Kbps Downstream. Ping to first hop has increased from 8-10 to 20-24. Effectively my ping has doubled.
    No hardware changes, no problems listed in my area.
     Download speedachieved during the test was - 3398 Kbps
     For your connection, the acceptable range of speeds is 1200-4000 Kbps.
     Additional Information:
     Your DSL Connection Rate :4224 Kbps(DOWN-STREAM), 192 Kbps(UP-STREAM)
     IP Profile for your line is - 3726 Kbps
    Upload speed achieved during the test was - 140 Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 192 Kbps
    My speeds use to be double those.

    On your connection, its not possible for the IP profile to drop as its always 88.2% of your sync speed.  If you type in Google 88.2% of 4320 it will give you your IP profile in decimals points. .
    Has your speed always been this low? What was it previously like.
    If you dial 17070 and press option 2 do you hear any noise? Satic, hissing crackles etc.. ?
    Have you tried changing microfilters?
    Also maybe a speed tweak to increase your speed
    As standard, the bell wire should be taken out of any master or extension socket as this can reduce the amount of interference your broadband can pick up and sometimes fixes the problem, see how to remove it here http://bit.ly/4LEKJg .  Make sure you remove it from master and any other sockets in the house
    Regards Edd
    Check your Line
    BT Speedtester

  • IP Profile dropped drastically following outage - ...

    We recently had another outage on the Infinity service which thankfully only lasted a couple of days.  However, since the fault, download speeds took a massive hit from 25M to approx 2M.  Speed tests have confirmed and the BT one says the profile is now at 1.93.  Support advised the problem would resolve itself over the next few weeks but that's not the case and are now saying they need to get an engineer out to the site.
    I've also been told that this visit could be chargeable depending on what the fault is, so I was just wondering if there's anything at all I should do before confirming the appointment?  I've rebooted the modem and hub, tried a different router, performed the tests wired and wireless.  Anything else?
    Thanks,
    Mike.

    gg30340 wrote:
     This can take 3 or 4 weeks so you need to be patient and not reset the modem again.
    If doesn't increase in that time then there may be a more serious fault in the line.
    That to me would be unaceptable and I would expect BT to refund the entire amount of my bill until the speeds were what they should be.  Waiting 3 or 4 weeks is ridiculous!
    -x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-x-
    Asking me to click a star will result in a big fat FO, if you help me and you aren't asking in your sig I am more than happy to!

  • IP Profile Dropped - FAO David Moon

    After what i thought was my broadband fixed it only took 3 days to become un-fixed.  I was helped my a forum mod on here and i am hoping the same one can get in touch with me as he knows my case very well.  
    After many failed attempts to reset my profile it final got reset on the 8th of May.  Cased was closed on 9th and 3 days later the profile when back down to the speed bellow....
    FAQ
    1. Best Effort Test:  -provides background information.
    Download  Speed
    2.26 Mbps
    0 Mbps
    4 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 2.26 Mbps
     For your connection, the acceptable range of speeds is 1.2 Mbps-4 Mbps.
     IP Profile for your line is - 2.3 Mbps
    2. Upstream Test:  -provides background information.
    Upload Speed
    0.74 Mbps
    0 Mbps
    0.83 Mbps
    Max Achievable Speed
    Upload speed achieved during the test was - 0.74Mbps
     Additional Information:
     Upstream Rate IP profile on your line is - 0.83 Mbps
    I have went though everything.  Connected to Master Socket.  Got tthe new faceplate with built in filter fitted by an engineer during first issues.  Wiring all looks fine.
    Just need a forum Mod to see if a reset on my profile will work again.  I still think there is an underlying issue. 

    Logs from HH4:
    0:04:10, 29 May. ( 40.930000) WAN Auto-​sensing running.
    20:03:07, 29 May. (1024728.770000) PPP LCP Send Termination Request [User request]
    19:42:35, 29 May. (1023496.940000) WAN operating mode is DSL
    19:42:35, 29 May. (1023496.940000) Last WAN operating mode was DSL
    19:42:35, 29 May. (1023496.900000) PPPoA is up -​ VPI: 0, VCI:38
    19:42:34, 29 May. (1023495.840000) PPP IPCP Receive Configuration ACK
    19:42:34, 29 May. (1023495.830000) PPP IPCP Send Configuration Request
    19:42:31, 29 May. (1023492.830000) PPP IPCP Send Configuration Request
    19:42:28, 29 May. (1023489.830000) PPP IPCP Send Configuration Request
    19:42:25, 29 May. (1023486.830000) PPP IPCP Send Configuration Request
    19:42:23, 29 May. (1023484.280000) PPP IPCP Send Configuration ACK
    19:42:23, 29 May. (1023484.280000) PPP IPCP Receive Configuration Request
    19:42:22, 29 May. (1023483.830000) PPP IPCP Send Configuration Request
    19:42:19, 29 May. (1023480.830000) PPP IPCP Send Configuration Request
    19:42:19, 29 May. (1023480.830000) PPP IPCP Receive Configuration NAK
    19:42:19, 29 May. (1023480.810000) PPP IPCP Send Configuration Request
    19:42:19, 29 May. (1023480.810000) CHAP authentication successful
    19:42:10, 29 May. (1023471.800000) CHAP Receive Challenge
    19:42:10, 29 May. (1023471.800000) Starting CHAP authentication with peer
    19:42:10, 29 May. (1023471.800000) PPP LCP Receive Configuration ACK
    19:42:10, 29 May. (1023471.780000) PPP LCP Send Configuration Request
    19:42:10, 29 May. (1023471.780000) PPP LCP Receive Configuration Reject
    19:42:10, 29 May. (1023471.780000) PPP LCP Send Configuration ACK
    19:42:10, 29 May. (1023471.780000) PPP LCP Receive Configuration Request
    19:42:10, 29 May. (1023471.500000) PPP LCP Send Configuration Request
    19:41:32, 29 May. (1023433.500000) PPP LCP Send Termination Request [Peer not responding]
    19:40:30, 29 May. (1023371.530000) Starting CHAP authentication with peer
    19:40:30, 29 May. (1023371.530000) PPP LCP Receive Configuration ACK
    19:40:30, 29 May. (1023371.520000) PPP LCP Send Configuration Request
    19:40:27, 29 May. (1023368.520000) PPP LCP Send Configuration Request
    19:40:24, 29 May. (1023365.520000) PPP LCP Send Configuration Request
    19:40:21, 29 May. (1023362.520000) PPP LCP Send Configuration Request
    19:40:18, 29 May. (1023359.780000) PPP LCP Send Configuration ACK
    19:40:18, 29 May. (1023359.780000) PPP LCP Receive Configuration Request
    19:40:18, 29 May. (1023359.520000) PPP LCP Send Configuration Request
    19:40:18, 29 May. (1023359.520000) PPP LCP Receive Configuration Reject
    19:40:18, 29 May. (1023359.510000) PPP LCP Send Configuration Request
    19:40:15, 29 May. (1023356.510000) PPP LCP Send Configuration Request
    19:39:42, 29 May. (1023323.210000) PPPoA is down after 2 minutes uptime [Disconnected]
    19:37:39, 29 May. (1023200.310000) WAN operating mode is DSL
    19:37:39, 29 May. (1023200.310000) Last WAN operating mode was DSL
    19:37:39, 29 May. (1023200.260000) PPPoA is up -​ VPI: 0, VCI:38
    19:37:38, 29 May. (1023199.200000) PPP IPCP Receive Configuration ACK
    19:37:38, 29 May. (1023199.180000) PPP IPCP Send Configuration Request
    19:37:38, 29 May. (1023199.180000) PPP IPCP Receive Configuration NAK
    19:37:38, 29 May. (1023199.160000) PPP IPCP Send Configuration ACK
    19:37:38, 29 May. (1023199.160000) PPP IPCP Receive Configuration Request
    19:37:38, 29 May. (1023199.160000) PPP IPCP Send Configuration Request
    19:37:38, 29 May. (1023199.160000) CHAP authentication successful
    19:37:38, 29 May. (1023199.080000) CHAP Receive Challenge
    19:37:38, 29 May. (1023199.060000) Starting CHAP authentication with peer
    19:37:38, 29 May. (1023199.060000) PPP LCP Receive Configuration ACK
    19:37:38, 29 May. (1023199.050000) PPP LCP Send Configuration Request
    19:37:35, 29 May. (1023196.050000) PPP LCP Send Configuration Request
    19:37:35, 29 May. (1023196.050000) PPP LCP Receive Configuration Reject
    19:37:35, 29 May. (1023196.050000) PPP LCP Send Configuration ACK
    19:37:35, 29 May. (1023196.050000) PPP LCP Receive Configuration Request
    19:37:34, 29 May. (1023195.600000) PPP LCP Send Configuration Request
    19:36:56, 29 May. (1023157.600000) PPP LCP Send Termination Request [No network protocols running]
    19:36:53, 29 May. (1023154.600000) PPP IPCP Send Configuration Request
    19:36:50, 29 May. (1023151.600000) PPP IPCP Send Configuration Request
    19:36:47, 29 May. (1023148.600000) PPP IPCP Send Configuration Request
    19:36:41, 29 May. (1023142.650000) PPP IPCP Send Configuration Request
    19:36:38, 29 May. (1023139.650000) PPP IPCP Send Configuration Request
    19:36:35, 29 May. (1023136.650000) PPP IPCP Send Configuration Request
    19:36:32, 29 May. (1023133.650000) PPP IPCP Send Configuration Request
    19:36:29, 29 May. (1023130.650000) PPP IPCP Send Configuration Request
    19:36:26, 29 May. (1023127.650000) PPP IPCP Send Configuration Request
    19:36:23, 29 May. (1023124.650000) PPP IPCP Send Configuration Request
    19:36:20, 29 May. (1023121.670000) PPP IPCP Receive Configuration ACK
    19:36:20, 29 May. (1023121.650000) PPP IPCP Send Configuration Request
    19:36:20, 29 May. (1023121.650000) PPP IPCP Receive Configuration NAK
    19:36:20, 29 May. (1023121.630000) PPP IPCP Send Configuration Request
    19:36:20, 29 May. (1023121.630000) CHAP authentication successful
    19:35:47, 29 May. (1023088.620000) CHAP Receive Challenge
    19:35:47, 29 May. (1023088.620000) Starting CHAP authentication with peer
    19:35:47, 29 May. (1023088.620000) PPP LCP Receive Configuration ACK
    19:35:47, 29 May. (1023088.600000) PPP LCP Send Configuration Request
    19:35:47, 29 May. (1023088.600000) PPP LCP Receive Configuration Reject
    19:35:47, 29 May. (1023088.600000) PPP LCP Send Configuration Request
    19:35:47, 29 May. (1023088.590000) PPP LCP Send Configuration ACK
    19:35:47, 29 May. (1023088.590000) PPP LCP Receive Configuration Request
    19:35:43, 29 May. (1023084.390000) PPP LCP Send Configuration Request
    19:35:05, 29 May. (1023046.220000) PPPoA is down after 4 minutes uptime [Disconnected]
    19:35:03, 29 May. (1023044.480000) PPP LCP Send Termination Request [Peer not responding]
    19:30:25, 29 May. (1022766.040000) WAN operating mode is DSL
    19:30:25, 29 May. (1022766.040000) Last WAN operating mode was DSL
    19:30:24, 29 May. (1022766.000000) PPPoA is up -​ VPI: 0, VCI:38
    19:30:23, 29 May. (1022764.930000) PPP IPCP Receive Configuration ACK
    19:30:23, 29 May. (1022764.920000) PPP IPCP Send Configuration Request
    19:30:23, 29 May. (1022764.910000) PPP IPCP Receive Configuration NAK
    19:30:23, 29 May. (1022764.900000) PPP IPCP Send Configuration Request
    19:30:21, 29 May. (1022762.180000) PPP IPCP Send Configuration ACK
    19:30:21, 29 May. (1022762.180000) PPP IPCP Receive Configuration Request
    19:30:20, 29 May. (1022761.900000) PPP IPCP Send Configuration Request
    19:30:17, 29 May. (1022758.900000) PPP IPCP Send Configuration Request
    19:30:17, 29 May. (1022758.900000) CHAP authentication successful
    19:30:14, 29 May. (1022755.890000) CHAP Receive Challenge
    19:30:14, 29 May. (1022755.890000) Starting CHAP authentication with peer
    19:30:14, 29 May. (1022755.890000) PPP LCP Receive Configuration ACK

Maybe you are looking for

  • Can no longer Burn purchased or private files since upgrade to 7.4.1

    I've read and ran diagnostics - results below. On purchased music I get error 4500 or 4000. I have read several posts where this has happened, HAS ANYONE had this error resolved and How? I can't live like this!!! All this since I upgraded!!! Bloody A

  • Attempting to copy files fails(i can't add files to the media folder)

    I am using Itunes 10 on windows 7 64 bit and my problem is : I changed the default storage directoy (because my first HDD is too small ) to the second disk of mine , by going to edit,advanced preferences and changing the path and clicking "Copy files

  • Change IDOC Control Record in Receiver system

    Hi Guys, I want to change the inbound IDOC control record,is there any BADI or F.M available ? My scenario : XI to SAP and its a custom application. Regards, Rajesh.

  • Lenovo Miix 2 8 brightness

    I bought a miix 2 8 inch the last week, i really like it. There is something strange about the brightness level. It seems that using the windows slide bar, it reach the maximum level at 50% of the bar. From the 50% to the 100% of the bar it doesn't c

  • Import invoices that have already been paid.

    Hi. I am trying to importing invoices through the Oracle Payables Open Interface that have already been paid. I understand that it is not possible to import invoices this way and have them marked as paid. Can anyone help me figure this out? I just ne