IP profile increase/decrease

My internet IP profile was 77.4mb was stable, on the 7 day i turn my modem off as i bought a new computer so had to switch it off to move it about, the profile when dropped to 64.2mb then i turn if off again to see if the profile would increase back as it was stable at 77.4mb and it dropped to 57.51. My 10 day stabilisation is up in 1 day how do i increase the profile back to a higher speed? do i leave the white modem off for a certain time? and router?
Solved!
Go to Solution.

just leave them on and dont turn them off and the profile will eventually return over the next few weeks or months

Similar Messages

  • Hp pro 4300 all in one pc - the brightness increase/decrease button to adjust the screen

    Dear all ,
    I have bought a new PC, It's Hp Pro 4300 all in one PC. I already installed all driver which public on Hp website correctly. However I can not use the brightness increase/decrease button .
    Could you please help me to solve this problem? 
    thank you very much and look forward to hearing from you.

    Hello novacom,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with you Hp Pro 4300 and adjusting the screen brightness using the button on your keyboard. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Business PCs - Compaq, Elite, Pro.
    I hope this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • My speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

    my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

    Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

  • Volume buttons on side are not increasing/decreasing the volume on my iphonr

    The volume buttons on side of iPhone are not increasing/decreasing the volume on the iPhone 4s

    Hello Chloelovescole,
    I'm sorry to hear you are having these issues with your iPad. If you are having issues with the side buttons either not responding or appearing to be stuck in a pressed state, you may find the information and troubleshooting steps outlined in the following article, up to and including contacting Apple Support for service if necessary:
    Get help with buttons and switches on your iPhone, iPad, or iPod touch - Apple Support
    Sincerely,
    - Brenden

  • Is it possible to increase/decrease the number of sort columns in Advanced Sort dialog?

    I am using Panel Collection and a Table. When I visit View->Sort->Advanced, I get Advanced Sort dialog with 3 column choices. Is there any setting exists which will allow you to increase/decrease number of columns presented for sorting?

    Hi,
    this cannot be changed and always is 3
    Frank

  • Is it possible to increase/decrease pages based on a number selected from a dropdown?

    I need to the end user to fill out information on between 1 and 5 properties.  Is it possible to increase/decrease the number of identical forms pages based on a dropdown from page one?  For example, if the local property manager decides there are 3 competing properties being developed, they will select 3 from a dropdown on the first page and three identical pages will be generated.
    Thanks

    This might be usuful to you : http://forums.adobe.com/message/5638520
    See this example : https://adobeformscentral.com/?f=dCixP9gCn9BlK72%2AKla92w
    Gen

  • Bracket keys for increase/decrease on brush size don't update display settings - any workaround?

    I’m a PS user new to Illustrator (CS6). In PS, using the bracket keys [] to increase/decrease brush point size will simultaneously update the data displayed in the tool panel at the top.
    While I can use the bracket keys in Illustrator to change the appearance of the brush stroke, it is not being updated in the tool panel input or in the stroke window…so I can essentially have (2) 3 pt strokes created with the same brush that don’t visually match but whose display properties DO match. Because I will be doing lots of editing I certainly don’t want to work this way.
    Is this just one of those glitchy things? Anyone know an alternate method that works?
    TIA,
    Kim

    Hi Kurt-
    Not the blob brush, just the basic 3 pt round paintbrush tool.
    Kim

  • Increasing/Decreasing "Gain" to a microphone in the FlexiJack.

    HIncreasing/Decreasing "Gain" to a microphone in the FlexiJack.y I have the problem with my Xfi Titanium, that it has too much gain so when gaming, people hear me typing and I get weird echos while recording, there needs to be a gain control for the Flexiport, cause if this was at a lan party no one would be able to hear me over the noise of hundreds of desktops running at full power, with monitoring on I can hear each key stroke at any volume rate for my headset and the "mixer" doesn't help, just decreasing the output volume does not equal gain. In the next version of drivers make the mixer more like an actual mixer and include a gain knob or check box. SOMETHING!
    Below is an example of an actual mixer channel strip, gain is refered to pre-amp and disregard the aux sends unless you guys want to have the ability to send through different outputs on the card and other hardware.
    If you guys truly pride yourself on audio quality add gain, please. Then will this be the ultimate audio solution.
    P.S. Should I actually send this to someone other than a mod?

    LRe: Increasing/Decreasing "Gain" to a microphone in the FlexiJack.x Ok, forget the gain for right now, I do I stop the echo when I have the line in/Mic in monitor mode? It is not just a delay or something, I hear two separate signals one that is real time, desired output, and one that is delayed just enough to be noticeable so like 5ms at least. Does any one know how to fix this?
    Current setup: Headphones plugged into the Front left and right and I have my mic plugged into the FlexiJack with the Microphone option checked. Enhancements make no difference and everything is default, besides FlexiJack. the only time I can get it to stop temporarily is by changing the Speaker Configuration between 2/2. and Headphones this only works for about an hour before the echo returns no settings were changed no application was launched, nothing.
    Thanks in advance. Tell me if I should just go to the real tech support.

  • How to wrap a Column (Increase/Decrease column width) in Interactive Report

    Hi,
    I have a Interactive Report and I want to wrap the column values.
    Also want to increase/decrease width of the columns..
    I have 2 columns say.. Description and List
      List  - aaaaaaa, bbbbbbb, hhhhhhh, nnnnnnn, 222222, 55555555, 77777777, ..... // list of values are seperated by ,
             // 1. want to wrap the values ..I mean to decrease the width       
      Descriptiopn - sdgssdjkllkkkkkkkk  // -- here I want to increase the width of column
                     dgdggdfgdfgdgg
                     dfgdfgdfdfggfdg
                     dgdgdgdgdgdf2ndly for the List Column, can I put the sepearte values in each Line (values are seperated by , here) - ROW will only one.
    For each ROW, I want to display List column as shown below.
          List  - aaaaaaa
            bbbbbbb
            hhhhhhh
            nnnnnnn
            222222
    IS this possible in Interactive Report??
    Thanks,
    Deepak
    Edited by: Deepak_J on Feb 23, 2010 4:14 PM

    Actually, I want to increase/decrease the column width in Interactive Report.
    As shown the in the example of Description field...it's coming in 4-5 lines.
    I want to increase the width of Description column..so that it should come only in 2 lines..
    thanks,
    deepak
    Edited by: Deepak_J on Feb 23, 2010 4:32 PM

  • How we will settle "Increase/Decrease of stock account"

    Hi Friends,
    How we will settle "Increase/Decrease of stock account" while receiving Finished goods from production order.(PRD transaction key)
    Urgent...
    Regards,
    Ramakrishna

    Hi,
    Generally The Finished Goods always maintained with Standarad Price.When Goods recieved with 101, the stocks are updated automatically.
    Also go through this:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/42/ef768694106a1ee10000000a114cbd/frameset.htm
    Regards
    Rahim

  • Photoshop Liquify Brush Size increase/decrease with alt+crtl drag don't work anymore...

    Hi :-)
    I have installed the last Update to Photoshop CS6 13.0.4...
    Now I can't increase/decrease the Brush Size in the Liquify-Dialog anymore (before I installed the update, it works fine with alt+crtl and drag)...
    If I press alt+crtl, the "Cancel"-Button is shown as "Revert", but the Brush resizing don't work... :-/
    I use a Mac on OS X 10.6.8...
    But it seems it has to do with the system... beacause at home I use 10.8.3 and there works everything fine with the 13.0.4 Update!!!

    Files has been uploaded here:
    http://soloporhoy.1free.ws/test/soluperguei/index.php

  • Formula for arriving at percentage of increase/decrease

    Does anyone know the formula in Numbers '09 to identify sales increase/decrease percent from one cell or date period compared to another? In Excel it is quite simple, i.e. =(B-A)/A and ENTER. This formula doesn't work in Numbers. I'd like to get deeper into Numbers but this is a stumbling block for me.
    Thanks

    Actually, this is the classic textbook manner in which we are trained to arrive at the value of a sales increase or decrease. If, for example we wish to compare December 2008 sales to December 2007 sales, the formula is =(DEC 08-DEC 07)/DEC 07. Then of course you would format the cell to % function and you're good.
    The glitch in Numbers is, as you noted, one cannot click the (DEC 07) cell at conclusion. Your work-around in which one simply types it in solves the problem. Another poster offered advice but it was somewhat different, and that formula works perfectly but is used for a different purpose. That is a formula that seeks to identify the percentage of value or relationship between two cells, NOT the increase or decrease. THAT formula is =DEC 08/DEC 07.
    Thanks all!

  • Time stretch: ramp increase/decrease

    Is it possible to gradually increase /decrease the % of a video?
    I have TGA footage that I’d like to begin at normal speed then gradually increase this to about 50%.
    I’m fairly certain the built in Tim Stretch functionality isn’t capable of this, but was wondering if there was perhaps an expression, or clever workaround?
    Any ideas?
    Thanks
    Jeff

    Wow, you’re right..
    I’ve been using Time Remapping as a method of simply jumping between time intervals.. 
    …forgot it can be used for slow motion effects and such.
    Thanks
    Jeff

  • Text that responds to the Increase/Decrease font size buttons

    How do I create text that responds to the Increase/Decrease Font Size buttons in the browser? None of the pages respond to these buttons.

    I'm not sure iWeb produces text that responds to the size change buttons. I check some of my pages and none respond. And these are text boxes that have not been converted to images.
    Message was edited by: Old Toad

  • Audigy 4 Pro - Trouble increasing/decreasing the volume using remote (RM 1500)

    NAudigy 4 Pro - Trouble increasing/decreasing the volume using remote (RM 500) As the title says, I'm having troubles with increasing/decreasing the sound volume using the remote controller unit - RM 500 on my Audigy 4 Pro.
    The sound volume inc/dec works just fine if I do it via the keyboard buttons, Audigy's External Hub or any other "software method", except when i'm using the remote.
    If i press + or - on the remote, only the left channel reacts.
    I'm using the latest drivers/apps (via AutoUpdate) over a fresh Win XP Pro / Audigy drivers (from the original CD).
    It does not have this strange behavior with the drivers/apps from the original CD, but only after installing the updated drivers. The reason i'm not keeping the original drivers is that a few years ago, when the original CD drivers were the only ones available, they caused the BSOD to my ex-system several times. It was something related to the fact I was using (and I still am) 4 DDR memory bars...
    I would really need some help on fixing this issue.
    Thanks in advance!

    R Thanks for the fast answer Loi.
    I downloaded the "ECUP_XPPCAPPBETA_US_3_40_2.exe" file but at installation start it gives me the message:
    "Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this Setup program. Setup will exit."
    PS: I just tried to install this beta app over the one i already have installed.

Maybe you are looking for

  • Help ! ! !Oracle 8.1.7, Linux, JDBC problem

    We have been troubleshooting a problem with our recently installed Linux (mandrake 8.0) Oracle DB Server. Everything seems to run fine, except JDBC connections. Whenever we connect to the server with one of our Java applications, JSP, Servlet, etc...

  • Sun Application Server 8.2

    When I try to debug my enterprise application in netbeans 5.0, I get the following errormessage: Deploying application in domain failed; Could not rename C:\Sun\AppServer\domains\domain1\applications\j2ee-apps\entityautocomp to C:\Sun\AppServer\domai

  • Not able to open a downloaded file - paint??

    I cannot open a file downloaded in Adobe.  This is the error message:  "Paint cannot read this file.  This is not a valid bitmap file, or its format is not currently supported."  I get the same message when I try to open saved adobe files or files th

  • IWeb can't open file "/~/sites/welcome.html"

    when ever i open iweb '08 this error message pops up and when i click ok iweb quits.

  • Ringtones for each contact in N900

    Is there any way to assign a ringtone for each contact in N900. Any tutorial or application for this is appreciable.