IP Reserved for Internal Usage?

Perhaps I'm missing something obvious, but what does the following LAN setting in a Router do/refer to?
"IP Reserved for Internal Usage:"
Thanks,
Malcolm

Perhaps I'm missing something obvious, but what does the following LAN setting in a Router do/refer to?
"IP Reserved for Internal Usage:"
Thanks,
Malcolm
Hi Malcolm,
Networking address space for the IP protocol is broken into classes — A, B, and C. (There is also Class D for multicasting and Class E for a small set of very reserved,“don't ever touch these” addresses.) In each of the Class A and Class C spaces, there are address ranges reserved for internal, non-Internet use (or a non-Internet routing space for IP traffic). There are two ranges in the Class A space: the 10.0.0.0 to 10.255.255.255 range (also represented as 10.x.x.x) and the 172.0.0.0 to 172.255.255.255 range (172.x.x.x) You may be using one of these spaces in your networks for internal addresses assigned to various hosts (network devices).
Hope to Help !!
Ganesh.H
Remember to rate the helpful post

Similar Messages

  • Iphone for international Usage

    I'm heading to Ireland in a couple weeks and would like to know about international usage.  Anybody know how I go about this?  I have AT&T.

    NittanyAgent wrote:
    I'm heading to Ireland in a couple weeks and would like to know about international usage.  Anybody know how I go about this?  I have AT&T.
    FIRST you must have your phone account enabled for International roaming. You call them to do this. Then you add a voice roaming package, that reduces your call costs from $1.29/minute to $0.99 per minute. For data it's a little better.
    I suggest adding the data roaming package, but when you get to Ireland go to any phone store and buy a cheap phone (~ £20) and a pay-as-you-go SIM and use it for voice calls. You can add and remove the data roaming package, however, it must remain on the phone for 1 billing cycle.
    Almost forgot the link to roaming package options: http://www.wireless.att.com/learn/international/roaming/affordable-world-package s.jsp#data

  • Automatic reservation for Internal in VMS

    Hi,
    I have a requirement to enhance in VMS for " automatically assign an internal reservation to a vehicle object once a sales order has been cancelled".
    Please suggest me the possibilities for enhance the request.
    Thanks

    Hi Hemanth,
       You must be performing an action for cancelling the sales order. You can write a code for that action with the help of ABAPer to do that.
       If you are doing standard credit process where you create credit memo then you can use interlinking action for RECM and code for that. else you can also use BADI's available in SPRO VMS setting.

  • NOTICE: Keys beginning with // are reserved for internal use

    If you're currently developing an application using NoSQL DB, or designing your schema for a NoSQL DB application, please take notice.
    In an upcoming release of NoSQL DB, there will be a new restriction on keys: no key may have an empty (zero length string) first component. An IllegalArgumentException will be thrown when attempting to use a key with a KVStore method, if the first component of the major path is empty.
    Using the standard Key.toString format, this means that any key beginning with // will be prohibited and the empty key / will also be rejected. For example, the following keys will be prohibited:
    //a
    //-/a
    //a/-/bThe reason for this restriction is to allow the NoSQL DB implementation to store internal information or metadata using key-value pairs. These internal key-value pairs will begin with an empty component and will not be accessible via the API. For example, these internal keys will not be returned by the KVStore.storeIterator method. This capability will be used internally in an upcoming release.
    If your application currently uses keys with an empty first component, please reply to this post and we will suggest alternative approaches.
    Thanks,
    --mark                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    Greg,
    Oracle does not follow the road for abstraction using views for it's E-Business suite.
    In general it's better to use the tables. It's faster and in case a table changes or becomes obsolete a view is provided anyway (i.e. RA_CUSTOMERS used to be a table prior to 11i, now it's a view).
    There are some exceptions (of course ;-):
    1. Multi-Org tables (_ALL suffix).
    If possible you should use the views if you run your reports from Oracle Applications. If you want to extract data for your datamart then the using the tables would be
    your preferred option.
    2. Multi-language tables (_TL suffix)
    For tables that have a "_TL" peer table the view with the _VL suffix should be used.
    If you are using Discoverer with 11i it may be good to have a look at the BIS end-user-layer that Oracle provides with 11i. This will give you the data abstraction you were seeking.
    Regards,
    Diederik

  • How to reserve material for Internal order

    Hi,
    How to reserve material for Internal order?
    Please reply ASAP.
    Thanks & Regards,
    Pankaj

    Hi Eli,
    Thanks for the reply.
    I was asking for the integraing of automatic creation of reservation of material.
    please revert back if i need to give more details.
    Regards,
    Pankaj

  • 'The Business Add-In is reserved for SAP internal use' message

    Hi all
    The Business Add-In is reserved for SAP internal use...
    I got this message when I tried to create a new implementation to BADI EQUI_SCR_01. I'm trying to add new tab to Iq01/02/...
    Does this message mean that this BADI is not modifiable? 'Coz this is the only BADI appropriate for my requirements.
    please help me on this
    Regards
    Rajan

    HI Rajan,
    You cannot use this badi as it is used by SAP for internal use...Check for other badis which is not internal use.
    Regards,
    Nagaraj

  • Manual Reservation for Maintenance Order

    Hi,
    Can anyone suggest some procedure so that I can stop automatic reservation creation from Maintenance Order (Transaction:IW31, type PM01, Category 30) and create manual reservation for the same.
    Presently Manual reservation is not allowed for Maintenance Order.
    Thanks
    Satadal

    To the best of my knowledge this is possible. To the best of my knowledge G/L account determination for every material happens after a series of checks are done internally by SAP. By checks I mean the sequence of steps as customized by the consultant in the configuration. Now at the end of the sequence if SAP has not succeeded in identifying a G/L account it will open up a tab in which u can manually enter the G/L account. For non-stock item you can anyway enter it.
    I would suggest that you post this query in the MM forum also.
    thanks
    Bala

  • Query about Manual Reservation for Maintenance Order Category 30

    Hi,
    I have a problem. Generally from Maintenance Order type PM01 under Order Category 30, when we give some materials requirement, SAP automatically generate reservation for those materials and take the GL as Consumable Item.
    But in my case, that GL has to be changed depending on what perpose we are using the material. But Manual reservation is not allowed for the order category 30 and no GL can be changed for automatic reservation.
    Can anybody suggest any way-out so that we can give our desired GL No. for the reservation for Maintenance order (say Order type PM01 under category 30 which is SAP internal).
    Thanks in advance,
    Satadal

    To the best of my knowledge this is possible. To the best of my knowledge G/L account determination for every material happens after a series of checks are done internally by SAP. By checks I mean the sequence of steps as customized by the consultant in the configuration. Now at the end of the sequence if SAP has not succeeded in identifying a G/L account it will open up a tab in which u can manually enter the G/L account. For non-stock item you can anyway enter it.
    I would suggest that you post this query in the MM forum also.
    thanks
    Bala

  • WebGate Error Report - The URL /access/sso is reserved for use by Oracle...

    We are getting a 500 error on the web gates when logging in.
    They have been working before, but are now reporting the error below.
    2010/01/27@07:09:25.632239 18521 33 WEB ERROR 0x0000151F /export/build40/Oblix/coreid1014/palantir/commonlib/src/apache2_req_info.cpp:170 "WebGate Error Report" Message^The URL /access/sso is reserved for use by Oracle Access Manager and has been used with incorrect parameters. ReqReq^POST /access/sso HTTP/1.1 ReqProto^HTTP/1.1 ReqHost^p1uawbsv1.portal.internal ReqStatLine^ ReqStatus^200 ReqRawUri^/access/sso ReqUri^/access/sso ReqFilename^/u01/app/oracle/product/11.1.1/ohs1/instances/instance1/config/OHS/ohs1/htdocs/access ReqPath^/sso ReqArgs^
    The configuration uses form based login
    Details for Authentication Scheme
    Level           1
    Challenge Method           Form
    Challenge Parameter           
    creds:userid password
    form:/oamsso/login.html
    action:/access/sso
    passthrough:no
    SSL Required           No
    Challenge Redirect           
    Enabled           Yes

    thanks,
    the login post goes to /access/sso, but now i am getting 404 error /access/sso
    Below is what I currently have the following in httpd.conf, which is the same as in a working environment.
    The web gate policy resources include /portal and /public, but no mention of /access. How does web gate know how to intercept /access/sso?
    [2010-01-28T10:50:42.9609+11:00] [OHS] [ERROR:32] [OHS-9999] [core.c] [host_id: p1uawbs02] [host_addr: 10.252.16.223] [tid: 18] [user: oracle] [ecid: 0000Pa_5qz3BP9s5Gj0Fyf0001rV00009_] [rid: 0] [VirtualHost: main] File does not exist: /u01/app/oracle/product/11.1.1/ohs1/instances/instance2/config/OHS/ohs1/htdocs/access
    #*** BEGIN WebGate Specific ****
    LoadFile "/u01/app/oracle/product/11.1.1/ohs1/oam/webgate/access/oblix/lib/libgcc_s.so.1"
    LoadFile "/u01/app/oracle/product/11.1.1/ohs1/oam/webgate/access/oblix/lib/libstdc++.so.5"
    LoadModule obWebgateModule "/u01/app/oracle/product/11.1.1/ohs1/oam/webgate/access/oblix/apps/webgate/bin/webgate.so"
    WebGateInstalldir "/u01/app/oracle/product/11.1.1/ohs1/oam/webgate/access"
    WebGateMode PEER
    <Location /access/oblix/apps/webgate/bin/webgate.cgi>
    SetHandler obwebgateerr
    </Location>
    <Location "/oberr.cgi">
    SetHandler obwebgateerr
    </Location>
    <LocationMatch "/*">
    AuthType Oblix
    require valid-user
    </LocationMatch>
    #*******Default Login page alias***
    Alias /oamsso "/u01/app/oracle/product/11.1.1/ohs1/oam/webgate/access/oamsso"
    <LocationMatch "/oamsso/*">
    Satisfy any
    </LocationMatch>
    #*** END WebGate Specific ****

  • Error message when doing settlement for Internal order

    Hi,
    Can someone please help me to resolve the following error:
    When trying to run settlement for an internal order, following error message is generated:
    Item 001 Order xxxxx budget exceeded
    Message no. BP603
    Diagnosis
    Budget was exceeded by xxxx amount in document item 001 Order xxxxxx.
    Also following points may be relevant:
    - System status ISBD for Internal Order is active
    - There is no PR/PO for the order, direct invoice from FI is created through tcode FB50
    - Availability control: Activation Type 1, Overall field ticked in customization
    - Tolerance  Limits:  Availability control action .... Usage 85 % - Warning message, Usage 100 % - Error message
    Thanks,
    Ankita

    Hi Loong,
    Thanks for reply.
    I have already tried drilling down the report S_ALR_87013019 , however following are the only things available from the report.
    1. There is a year independent overall budget for the order of 92500 amt.
    2. Actual in 2009 is 7870.41 and in 2010 is 77980.24. So the total actual amt is 85850.65 overall.
    3. The available budget is 6649.35. i.e Over budget minus actual utililized amounts.
    Since, in the report it shows that the budget is available then I am unable to figure out why does it give error for exceeding budget by amt 50100.65 at the time of settlement.
    Regards,
    Ankita

  • Is there a reservation for iphone 5 for tourist ?

    is there a reservation for iphone 5 for tourist ?

    There's no way, at least at this time, that you can schedule a future date for pickup. If you're not going to be in Hong Kong until November, you'll have to submit your reservation at that time.
    Please be aware, if you are not already, that the warranty on the iPhone is not international. So unless you live in China, I would strongly suggest that you buy your iPhone in your country of residence, waiting until the iPhone 5 is released there if it has not been already.
    Regards.

  • International usage charges

    I'm just a little confused about how international usage works. If you don't sign up for any kind of plan and take your iPhone (to say India, where I'll be headed), will the phone still work and if so, what charges will apply? I will be using the call and voicemail feature little to none and I won't be getting incoming calls, but what about text messaging and safari? How much will those cost me if I don't agree to any plans? Or will none of it work at all?

    Alice K,
    You will want to enable International Roaming with AT&T before you leave to allow you to make/receive calls internationally. AT&T would be your best source for international charges for calls and text messages. You can read the following article for more information about international travel with your iPhone:
    http://support.apple.com/kb/HT1686
    International data charges can get fairly expensive. The new iPhone 2.0 software will enable you to turn airplane mode on (which disables cell networks, so you will not receive calls or use the cell data network) but also turn Wi-Fi on, so you can still access local Wi-Fi networks and hotspots. Therefore you can still browse on Safari when you are within range of a Wi-Fi network without being worried about data charges. In this mode, you will not receive calls or missed call notifications, however. You can find out more information about the iPhone 2.0 software by watching this guided tour:
    http://www.apple.com/iphone/guidedtour/
    Hope this helps,
    Jennifer B.

  • Overhead Calculation for Internal Order

    Hi Gurus,
    I have created one internal order and made the reservations.
    I have configured all Overhead Keys and Overhead Groups. I have also maintained the rates for the same.
    Now while i m running the overhead calculation for internal order, I am getting below stated result:
    Y141  Machine Cost 5000 INR 100 KG Rs. 555.27
    Y142  Labour            60    INR 100 KG Rs. 1110.54
    Y143  Utility              60    INR 100 KG Rs. 2221.08
    Y144  QC/QA Exp     5000 INR 100 KG Rs.4,442.16
    Now u can see that overheads are doubled evrytime. I have made the configuration perfectly. I m demn sure abt it.
    But i think i m lacking somewhere because such kind of ridiculous overhead should not come.
    Pls help me in this regard.
    Hope to get back u frnds!!!!!!!!

    hi
    check work center settings. i.e capacity calculations
    regards,
    sreekanth

  • No price could be determined for internal activity LABOUR 0000005006

    No price could be determined for internal activity LABOUR 0000005006
    Costs of cost element 7500001 cannot be assigned to any cost component
    Message no. CK578
    Diagnosis
    In preliminary order costing or a confirmation, costs for cost element 7500001 were calculated that could not be assigned to any cost component of cost component structure 01.
    These costs are from the usage of an internal activity (activity type SETUP) for cost center WORKCENTER.
    System Response
    The costs will be treated as fully relevant to stock valuation, and debit the order and credit the cost center with the full amount when a confirmation is entered.
    Procedure
    If necessary, assign cost element 7500001 to a cost component in cost component structure 01.

    Dear,
    You need to check this calling your cost component structure using OKTZ.Your Cost Element must be assigned to one of the components.
    Please closed your previous thread also by assigning relevant points.
    Regards,
    R.Brahmankar

  • International Usage - WARNING - Outrageously expensive!

    I bought a iPhone the day it was released, absolutely love it, and a week later went to Europe. The phone works great over there and so does EDGE, i.e just as slow as here..
    Got home, received my first AT&T bill: THEY CHARGED ME $940 FOR INTERNATIONAL DATA ROAMING - TOTAL USAGE WAS 40MB.
    I called AT&T and complained - I didn't recall the promo for "unlimited data" clearly excluded international - was told "they happen to have a $24.99/month international data plan for the iPhone with 20MB of data" - no unlimited data plan was available, even though you can get one if you have a 3G card for your laptop.
    Also, while international roaming IT WILL COST YOU 50 CENTS PER SMS YOU SEND AND 15 CENTS TO RECEIVE ONE - NO PLAN IS AVAILABLE!
    The end of my story was I got 20MB for $24.99 but I had to pay $470 for the other 20MB.......
    So if you plan to use your iPhone internationally:
    - Tell everyone not to send you SMS's and don't send one yourself
    - Don't use Google Maps, Safari or Mail, unless in Wi-Fi zone
    - Alternatively get the 20MB plan
    I can only conclude current AT&T policies is a total rip-off when it comes to international usage. Maybe it would be cheaper to get an account with the European carrier later this year. AT&T surely needs some competition.

    I am sorry to say that I told everyone so (among others who did the same). The iPhone is NOT a good international device. I posted several comments on this. Be aware that it is not just downloading items yourself, Internet use or email/messaging. The iPhone has a serious operational deficiency in that constantly updates the weather, clock and stock Widgits throughout the day. Over a week or two this can add up to hundreds of KB and you have no control over this. (I bet at least 30% of your charges are foir this, Check your datalogs and look for weird data access times such as in the wee hours of the morning).
    Message was edited by: Host

Maybe you are looking for