IP settings for PC connected to SPA942

My SPA942 is connected directly to ITSP ( a cable modem) using DHCP. It gets the IP and VoIP part works fine.
However, the PC with DHCP client on connected to the SPA942 PC port does not get an IP and I can not use internet.
Questions:
1. The PC port of SPA942 - does it features a DHCP server so all devices connected to it will get IPs? If yes, what is wrong and why my PC does not get an IP?
2. Or: the PC port of SPA942 is just a bypass and my PC should get IP from the ITSP modem (which has a limit of one IP only and this is why PC is not connected)?
3. Will my PC get on-line with manual IP settings? If yes, what it should be when SPA942 gets this:
IP 24.84.40.148
Sub net: 255.255.252.0
DNS: 64.59.144.90
4. When I set my PC to manual mode with IP 24.84.40.150 and same subnet mask and DNS as SPA942 I can get to the web settings of SPA942 but still can't get to the web. Not completely sure what I am doing here...
Please help and thank you!

Basically what you need is a router for you to use both Phone and PC to work with the internet. The Ports that you are seeing underneath the device is use for VLAN which separates voice and Data. The Phone doesnt have a router functionality so you wont be able to share the internet with your computer.

Similar Messages

System Landscape settings for EP connecting to SAP Webdisp to ess/mss

We have external facing portal . for reverse proxy we are using sap webdispatcher.
sapwebdispatcher->ep->sapwebdispatcher--->HCM(ess/mss)
EP connects to HCM(ess/mss) via sap webdispatcher.
What should be my system landscape defination in Portal and JCo destinations for webdynpro where ep and webdynpro is connecting to backend(ess/mss) via sap webdispatcher.
My guess is instead of message server I should point to sap webdispatcher url then what should be my port for connectors,ITS settings and WebAS settings in system landscape.
Thanks very much in advance for your help.

Something like that, with Firewalls and additional web dispatcher for external access to HCM:
FW                   FW
FW sapwebdispatcher1-FW-->ep--->sapwebdispatcher3--->HCM(ess/mss)
FW                   FW            ^
FW                   FW            |
FW sapwebdispatcher2-FW----------->|
FW                   FW
The reason is that EP iview with ITS content requires browser to have direct visibility of ITS backend. You can see it if you trace HTTP requests.
Regarding system definition in PCD:
Michael is correct about Connector part - you can do direct HCM.
The more important issue is what you will put in "ITS Connection" (and SAP Web AS Connection). It is important to put public hotname/URL of sapwebdispatcher2, otherwise external web browser will have issues.
Another thing: no protocol mix for external URLs. If your EP is accessed via HTTPS, you will have to put HTTPS in ITS connector definition. Otherwise users will see browser warnings. You can do SSL termination on web dispatchers if you want and use HTTP from DMZ web dispatchers, but definition of external URLs should be protocol consistent.
Regards,
Slava

FTP adapter settings for SFTP connection

We are trying to connect an FTP adapter to a SFTP server.
After solving the license problem with Maverick/3SP class, the error we get now is:
"The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server."
Have done all steps required, set up the oc4j-ra.xml file, adding the license file to the jar, etc. The settings are as usual (following the instructions in the manual): password authentication, port 22, etc.
Taking a look at the SFTP/OpenSSH server log, we can see that OAS tries to connect, but the last log entry is "fatal: Read from socket failed: Connection reset by peer.". Of course, if we try to connect through the SFTP client from the OAS machine to the SFTP server, we can do it with no problems.
What can we do?

Log a Service Request with Oracle. We are working with Oracle to resolve SFTP related issues as well.
Good luck, Sjoerd

SQL 2008 settings for remote connections

Hi
I am unable to connect to my SAP B1 instance from a client PC. I am using SQL Server 2008 for the first time. The error message on the client PC implies that remote access has not been enabled on the SQL Server 2008. I am not sure how to do this and have so far found nothing from SAP.
Hope someone can help since I need this working for tomorrow!
Ian

SQL 2008 needs new SQL Native Client. Have you install that client on the PC successfully?
Thanks,
Gordon

WRT310N: Help with DMZ/settings (firmware 1.0.09) for wired connection

Hello. I have a WRT310N and have been having a somewhat difficult time with my xbox 360's connection. I have forwarded all the necessary ports (53, 80, 88, 3074) for it to run, and tried changing MTU and what-not.
I don't know if I have DMZ setup incorrectly, or if it's my settings.
Setup as follows:
PCX2200 modem connected via ethernet to WRT310N.
The WRT310N has into ethernet port 1 a WAP54G, and then upstairs (so that my Mother's computer can get a strong signal) I have another WAP54G that I believe receives its signal from the downstairs 54G.
In the back of the WRT310N, I have my computer connected via ethernet port 3, and my Xbox 360 connected via ethernet port 4.
Now, I first figured I just have so many connections tied to the router and that is the reason for being so slow. However, when I unplug all the other ethernet cords and nothing is connected wirelessly, except for my Xbox connected to ethernet port 4, it is still poor. Also, with everything connected (WAP54G and other devices wirelessly) I get on my PC and run a speedtest. For the sake of advice, my speedtests I am running on my PC are (after 5 tests) averagely 8.5 Mbps download, and 1.00 Mbps upload, with a ping of 82ms.
Here is an image of the results:
http://www.speedtest.net][IMG]http://www.speedtest.net/result/721106714.png
Let me add a little more detail of my (192.168.1.1) settings for WRT310N.
For starters, my Father's IT guy at his workplace set up this WRT310N and WAP54G's. So some of these settings may be his doing. I just don't know which.
"Setup" as Auto-configurations DHCP. I've added my Xbox's IP address to the DHCP reservation the IP of 192.168.1.104. This has (from what I've noticed) stayed the same for days.
MTU: Auto, which stays at 1500 when I check under status.
Advanced Routing: NAT routing enabled, Dynamic Routing disabled.
Security: Disabled SPI firewall, UNchecked these: Filter Anonymous Internet Requests, Multicast, and Internet NAT redirection.
VPN passthrough: All 3 options are enabled (IPSec, PPTP, L2TP)
Access Restrictions: None.
Applications and Gaming: Single port forwarding has no entries. Port Range Forwarding I have the ports 53 UDP/TCP, 88 UDP, 3074 UDP/TCP, and 80 TCP forwarded to IP 192.168.1.104 enabled. (192.168.1.104 is the IP for my xbox connected via ethernet wired that is in DHCP reserved list)
Port Range Triggering: It does not allow me to change anything in this page.
DMZ: I have it Enabled. This is where I am a bit confused. It says "Source IP Address" and it has me select either "Any IP address" or to put entries to the XXX.XXX.XXX.XXX to XXX fields. I have selected use any IP address. Then the source IP area, it says "Destination:" I can do either "IP address: 192.168.1.XXX" or "MAC address:" Also, under MAC Address, it says DHCP Client Table and I went there and saw my Xbox under the DHCP client list (It shows up only when the Xbox is on) and selected it.
Under QoS: WMM Enabled, No acknowledgement disabled.
Internet Access Priority: Enabled. Upstream Bandwith I set it to Manual and put 6000 Kbps. I had it set on Auto before, but I changed it. I have no idea what to put there so I just put a higher number.
Then I added for Internet Access Priority a Medium Priority for Ethernet Port 4 (the port my xbox is plugged into).
Administration: Management: Web utility access: I have checked HTTP, unchecked HTTPS.
Web utility access via Wireless: Enabled. Remote Access: Disabled.
UPnp: Enabled.
Allow Users to Configure: Enabled.
Allow users to Disable Internet Access: Enabled.
Under Diagnostics, when I try and Ping test 192.168.1.104 (xbox when on and connected to LIVE), I get:
PING 192.168.1.104 (192.168.1.104): 24 data bytes
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
--- 192.168.1.104 data statistics ---
5 Packets transmitted, 0 Packets received, 100% Packet loss
Also, when I do Traceroute Test for my Xbox's IP, I just keep getting:
traceroute to 192.168.1.104 (192.168.1.104), 30 hops max, 40 byte packets
1 * * * 192.168.1.1 Request timed out.
2 * * * 192.168.1.1 Request timed out.
As for the Wireless Settings, it is all on the default settings with Wi-Fi Protected setup Enabled.
To add, I have tried connecting my modem directly to the Xbox and my connection is much improved. I have no difficulty getting the NAT open, for it seems my settings are working for that. Any help with these settings would be VERY much appreciated.
Message Edited by CroftBond on 02-18-2010 01:09 PM

I own 2 of these routers (one is a spare) with the latest firmware and I have been having trouble with them for over a year. In my case the connection speed goes to a crawl and the only way to get it back is to disable the SPI firewall. Rebooting helps for a few minutes, but the problem returns. All of the other fixes recommended on these forums did not help. I found out the hard way that disabling the SPI Firewall also closes all open ports ignoring your port forwarding settings. If you have SPI Firewall disabled, you will never be able to ping your IP from an external address. Turn your SPI Firewall back on and test your Ping.
John

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.

When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.

If you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa

What are the default settings for ethernet, shows connected but no internet

What are the default settings for ethernet ? shows connected but no internet via ethernet.
It used to work fine but I think i have changed something getting my airport to work.
Now i only get internet via wifi.
Thanks in advance

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.

I have lost the correct proxy settings for the ethernet connection using Safari. How do I get back to the original ethernet proxy settings?

I changed the ethernet proxy settings for Safari on my Mac Pro, when I was in a particular place that required extra security. Now I cannot get the ethernet connection to work when back home. The wireless connection works fine. What are the original ethernet proxy settings. How do I make the changes?
Thanks

From your Safari menu bar click Safari / Preferences then select the Advanced tab. Click Change Settings next to Proxies. Select Automatically from the Configure pop up menu.
You may also have to select the Proxies tab. If any of the boxes are selected, deselect then click OK.

TS2753 I have ipad 3 iOS 7.1 last update when connect to my macbook osx 10.8.5 get the following error "iTunes could not check for an update to the carrier settings for your iPad A unkown error occurred 1651"

I have ipad 3 iOS 7.1 last update when connect to my macbook osx 10.8.5 get the following error "iTunes could not check for an update to the carrier settings for your iPad A unkown error occurred 1651"
any help please

If you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa

Good Morning, this morning I received the following error message when the iPhone connected to iTunes: itunes could not check for an update to the carrier settings for your iphone. an unknown error occurred (1635) iphone 3gs with IOS 5. any ideas? thx

Hello,
this morning I received the following error message when the iPhone connected to iTunes: i
tunes could not check for an update to the carrier settings for your iphone. an unknown error occurred (1635)
any ideas? thx

I get the same error (although in Dutch ;-)).
It also says something like (I'm translating): "Make sure your network settings are correct and your networkconnection is active or try again later." Is there a way to find out these "correct networksettings"?
I now get it for a week, eacht time I connect my iPhone to itunes...

Not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi

Solution may be found if you search in the "More Like This" section over in the right column.

N95 connection settings for Cingular Media Net

Hi @ all,
does someone know how I have to modify the settings for the N95 to be able to connect to the Cingular MEdia Net in Michigan or somewhere else in US?
Due to Cingular doesn't sell this phone, they don't support this trouble shooting.
Thanks,
Alex

The Cingular settings should be populated automatically if you have a cingular SIM card in the phone. If not run the Settings Wizard application in the Tools folder.

Asking for data connectivity for settings and Photo gallaery. Why?

Asking for data connectivity for settings and Photo gallaery. Why?

sounds good to me. suggest it here!
apple.com/feedback

Error while creating data source in bi for uc connect

Hi Experts,
we have using ud connect to pull the data from ms sql server using jdbc,we have maintained all the settings in the j2ee engine and also we performed the smoke test which showed the tables content in the ms sql data base.
and also we have maintained the rfc connection between the j2ee and sap bi,and performed the test connection which excecuted great.
but while creating the data source in sap bi administration work bench(rsa1)>sourcesytem>udconnect>create
we have maintained the following parameters
rfc destination----
we have maintained the rfc destination,which we could see in sm59 for the sap bi client
logical system name----
we have mentioned a generic logical system name(here we are not sure)
type of connector----
jdbc
name of the connector------ sdk_jdbc
sourcesystemname----
it has taken the logical system name description when we enter the logical system name.
once after maintaining the setting.when we performed the check.
it showed us the error
check failed rfc connection:check destination

Hi,
Check the gateway settings for
Gateway Host
Gateway service
Also check the UDC connection information.
Check these links:
1 - http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
2 - http://help.sap.com/saphelp_srm40/helpdata/es/54/ddfb3ff778ed28e10000000a1550b0/content.htm
3 - https://encrypted.google.com/url?sa=t&source=web&cd=7&ved=0CCwQFjAG&url=http%3A%2F%2Fwww.bi-
expertonline.com%2Fdownloads%2FSchroeder0604.doc&rct=j&q=ud%20connection%20in%20sap%20bi&ei=WMDnTdm_E4ruvQOEzZWcDg&usg=AFQjCNGvqKuoTq9kypNMNGhis8WrZ-gFCg&cad=rja
Let us know in case the issue still persists.
Debanshu

IP settings for PC connected to SPA942

Similar Messages

Maybe you are looking for