IP SLA duplicate trap messages received
Hi
Refer to the attached screen capture from a trap receiver program, it seems that there are duplicate traps received from an IP SLA sender which is a Cat6509. Is it normal?
Configuration of the IP SLA sender attached also.
Thanks!
Hi Deepak,
I can say from my personal experience that whenever we use same multicast ip address and port for the purpose of multicast utility then we will get the duplicate messages.
If that is not the case, then I can say the following are the reasons for duplicate packets and it is better if we can contact your network team to check the following :
***Duplicate multicast packets are symptoms of several things:***
1. An ethernet-level device (e.g. bridge) that doesn't understand multicast so reforwards it. This is easy to track to the right subnet using mtrace's packet statistics, but hard to track to the final device because it doesn't change the ethernet source address.
2. The design of the PIM protocol accepts multiple copies periodically; when there are multiple paths to a multi-access link the default state is that all routers on the link forward; PIM Assert messages elect a single router as the forwarder but periodically time out.
3. Forwarding loops. This is often due to a misconfigured router.
Please cross verify the same but I am agreeing partly with Jay as most of the times we consider that the multicast test is passed even if there is any duplicate messages. But reconsider the above reasons and trace it out along with your network team..
Thanks,
Sreedevi
Similar Messages
-
Multiple Duplicate Text messages received repatedly
Quite often I get several duplicate Text messages of the same message. Drive my message count way up
booyadan16 wrote:
Ever sice the latest update I've been receiving at least 3 duplicates of every text that gets sent to me. Anyone else experiencing this or have any ideas on how to make it stop?
It's actually been going on since well before the update. I have friends with other phones who have the same thing happen to them. One actually has a 'pre-smartphone' phone and they get multiples all the time. The problem is with some setting within Verizons network, which apparently they don't feel is that big of a deal. Only thing I've heard is to contact Verizon and tell them and they supposedly do someting to correct it for that user, but that's about it -
JMS - PI - IDoc scenario: possible to disable check for duplicate JMS message ID?
Dear all,
we have a scenario JMS - PI - IDoc. We are on 7.4 SP 7 AEX.
Once and again we get this error in PI Logs
com.sap.aii.adapter.jms.core.channel.filter.InboundDuplicateCheckFilter.filter(MessageFilterContext filterCtx)
Duplicated and already processed JMS message with JMSMessageID ID:414d512053415050523120202020202053f0f4852000fb39 and XI message id b0beffdbcee64c2605779eaacf27b335 detected.
We are currently investigating the error and it seems that the duplicate message IDs already exist on the JMS (MQ) side. The messages with the same ID reside in the same queue but have different payloads, so really are different messages
While it's certainly true that we need to get rid of those duplicate IDs in the long run, I'd like to ask if it is possible to tackle the problem from both sides.
My sender JMS Adapter looks like this:
Transactional JMS Session = Checked
Set PI Message ID (MessageID) to = GUID
Set PI conversation ID (ConversationID) to = No Value
Enable Duplicate Handling = Unchecked
Prefix Channel ID = Unchecked
--> Is there any way to tell PI to just ignore the duplicate JMS ID and continue processing?
Many thanks
Kind regards
JensHi Jens - Please have a look at the below note if it helps.
If you want the duplicate messages received from different channels (that is JMS Messages with the same Message ID) to be processed as a distinct JMS messages and not as duplicate messages, select Prefix Channel ID to JMS Message ID
Reference :
Configuring the Sender JMS Adapter - Advanced Adapter Engine - SAP Library -
Hello,
I currently a droid x running android 2.3.3 in the Royersford, PA area. I updated to Android 2.3.3 2-3 weeks ago. After this update I started receiving a noticeable amount of duplicate text messages. The duplicates can number anywhere from 2 to 11 and are received over a ten minute period. As I am sure you can imagine this is extremely frustrating. It is also not restricted to one contact. I have received duplicate texts from 4 different carriers and the majority of types of phones available ranging from iphones to android to non-smartphones.
In an attempt to resolve the issue I visited my local verizon store and after spending about 20 minutes of being asked over and over if i had tried taking the battery out (which I had) I was finally told to perform a factory reset on my phone. I did and after 2.5 hours of redownloading all my apps (apparently they haddn't backed up to google's servers yet) I started receiving duplicate messages again (it actually started before I redownloaded all my apps). I returned to the verizon store in the next few days only to be told that since they could not get the problem to replicate itself in store (this after waiting for 45 minutes for the clerk to go around the store and use every display phone to text my phone) there was nothing they could do to help me, even though I still had duplicate messages in my inbox.
After waiting about a week I grew frustrated enough to try again and they agreed to give me a new phone (which I currently have). I didn't receive a duplicate for about 2 days and then it started again and has gotten progressively worse ever since. I even tried switching from the stock messaging app to handcent but it did not help (and yes I disabled the default messaging app).
Is anyone out there capable of fixing this issue? Is it an android problem, a droid x problem, or a verizon problem? Any help would be greatly appreciated.
A few more bits of information. My mom also has the droid x running 2.3.3 and has recently started experiencing the same problem but not to the extent that I do. My brother has a htc incredible running something other than 2.3.3 (I'm not sure what) and experiences the same problem as myself (this leads me to believe it is either an android problem or verizon but since it is on two different versions of android I am leaning towards verizon).
Thanks for any help anyone can give, and if there is already a topic about this I apologize, I could not find it anywhere on this site.Hey all back from ice cream break them good Nuttie cones Hi geri you little burger glad you back on here i missed them Gerio O
post . Now on to the subject in hand i've got both Gmail an yahoooo on Birtha. an just Gmail on The Dinc. havent named her yet
got any sugestions throw it my way. But all the way back to when i had my BB i never got a Duplicate MSG unless some one
stupid sent two at my phone wich i asked do u have ants in your shorts. Now i've have had some weired text msg's come to one
of my No.s but i called Ver. an had that stopped they were those pay msg were you pay 1.99 up 9.99 i told teck i dont need phone
S** Block these Turkeys Now so i don't have pute up with that crap any more an the teck said the block is on your Acc. but if want
to use that type of text like what was sent to you your have to call an unblock it again I told him that will never happen . Now for the
record i was'nt going out looking for this crap it was sent to our phone an i had it stopped. But it sounds like his issue is app
related or maybee its something on his acc. that could be triggering something. does.nt hurt to call an check. -
Weblogic Message Bridge Producing Duplicate JMS Messages
We have a message bridge that we use to integrate with TIBCO. The message bridge is deployed on a WL cluster. We see duplicate JMS messages produced by the bridge when it is deployed on the cluster. We don't see this behavior when only one ManagedServer in the cluster is active,.
TIBCO version: 4.4.3 V5
WLS: 10.3.3 with patch for bug BUG8732539 (BQC6)
java -version
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Oracle JRockit(R) (build R28.0.0-679-130297-1.6.0_17-20100312-2121-linux-x86_64, compiled mode)
We are also seeing a lot of exceptions related to
<May 27, 2011 4:11:57 PM PDT> <Warning> <Connector> <BEA-190032> << eis/jms/WLSConnectionFactoryJNDIXA > ResourceAllocationException thrown by resource adapter on call to ManagedConnectionFactory.createManagedConnection(): "javax.resource.ResourceException: Failed to start the connection ">
However the bridge is active. We are monitoring the message-out count on TIBCO and we observed that we see duplicates whenever there a message is re-delivered. We opened a case with Oracle support and they suggested patch 10258751 which didn't help. The next suggestion was a patch for "Bug 11852771 - [WLS10.3.2]MISSING AND DUPLICATE IN JMS QUEUE MESSAGE MONITORING" but I don't think it will help since our JMS consumers are getting duplicate messages and this is not just a UI issue.
Here is the message behavior when we send a single message:
Timelines
11:34:17 --> Message sent to TIBCO EMS queue
11:34:17 --> WL MS3 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
11:34:17 --> WL MS1 says it got the message and committed the transaction
11:34:17 --> Message is visible in the JMS queue in the admin console
11:34:17 --> TIBCO EMS has still not received an ACK from WL for the message
11:34:31 --> TIBCO EMS resends the same JMS message to WL
11:34:31 --> WL MS2 says it got the message and committed the transaction
11:34:31 --> WL MS1 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
11:34:31 --> Message is visible in the JMS queue in the admin console (At this point there are two messages in the JMS queue)
11:34:31 --> TIBCO EMS has still not received an ACK from WL for the message
11:34:54 --> TIBCO EMS resends the same JMS message to WL
11:34:31 --> WL MS4 says it got the message and committed the transaction
11:34:31 --> WL MS2 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
11:34:31 --> Message is visible in the JMS queue in the admin console (At this point there are three messages in the JMS queue)
11:34:31 --> TIBCO EMS receives an ACK from WL for the message
MS04
####<May 27, 2011 11:34:54 AM PDT> <Debug> <MessagingBridgeRuntime> <> <MS04> <[ACTIVE] ExecuteThread: '109' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-6A59E8FE76C4FC4CA149> <> <1306521294611> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
JMS Message Class: TextMessage
JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
JMSCorrelationID: null
JMSDeliveryMode: PERSISTENT
JMSDestination: Queue[SourceQueue1]
JMSExpiration: 0
JMSPriority: 4
JMSRedelivered: true
JMSReplyTo: null
JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
JMSType: null
Transaction Id: BEA1-6A59E8FE76C4FC4CA149
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
####<May 27, 2011 11:34:54 AM PDT> <Debug> <MessagingBridgeRuntime> <MS04> <MS04> <[ACTIVE] ExecuteThread: '109' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-6A59E8FE76C4FC4CA149> <> <1306521294611> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
JMS Message Class: TextMessage
Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
New JMS MessageID: ID:<193654.1306521294611.0>
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
MS03
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257342> <BEA-000000> <Bridge MessageBridge1 Successfully got connection to the target destination>
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1: both source and target adapters support XA = true>
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 supportsMDBTX = false supportsXA = true async = true>
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 WorkMode = Exactly-once>
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntimeVerbose> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 Entering processMessages() ------ >
####<May 27, 2011 11:34:17 AM PDT> <Error> <MessagingBridge> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-3AA29116A4CA622834EA> <> <1306521257343> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: javax.resource.ResourceException: Failed to setup the Resource Adapter Connection for enlistment in the transaction, Pool = 'eis/jms/WLSConnectionFactoryJNDIXA', javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable
javax.transaction.xa.XAException: Internal error: XAResource 'eis/jms/WLSConnectionFactoryJNDIXA' is unavailable
at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:948)
at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:634)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1227)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
at $Proxy62.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:200)
at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
at $Proxy62.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
at $Proxy62.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable
javax.transaction.xa.XAException: Internal error: XAResource 'eis/jms/WLSConnectionFactoryJNDIXA' is unavailable
at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:948)
at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:634)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1227)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
at $Proxy62.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
... 8 more
).>
####<May 27, 2011 11:34:17 AM PDT> <Warning> <MessagingBridge> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257344> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
.)>
MS02
####<May 27, 2011 11:34:31 AM PDT> <Debug> <MessagingBridgeRuntime> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-679AF074F381152F047C> <> <1306521271386> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
JMS Message Class: TextMessage
JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
JMSCorrelationID: null
JMSDeliveryMode: PERSISTENT
JMSDestination: Queue[SourceQueue1]
JMSExpiration: 0
JMSPriority: 4
JMSRedelivered: true
JMSReplyTo: null
JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
JMSType: null
Transaction Id: BEA1-679AF074F381152F047C
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
####<May 27, 2011 11:34:31 AM PDT> <Debug> <MessagingBridgeRuntime> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-679AF074F381152F047C> <> <1306521271392> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
JMS Message Class: TextMessage
Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
New JMS MessageID: ID:<196075.1306521271386.0>
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
####<May 27, 2011 11:34:54 AM PDT> <Error> <MessagingBridge> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521294610> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: weblogic.transaction.RollbackException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
... 14 more
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1871)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:330)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:225)
at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:293)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1534)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
... 14 more
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
... 2 more
).>
####<May 27, 2011 11:34:54 AM PDT> <Warning> <MessagingBridge> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521294610> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
MS01
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-72BC818FE2BB8C2655C6> <> <1306521257536> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
JMS Message Class: TextMessage
JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
JMSCorrelationID: null
JMSDeliveryMode: PERSISTENT
JMSDestination: Queue[SourceQueue1]
JMSExpiration: 0
JMSPriority: 4
JMSRedelivered: false
JMSReplyTo: null
JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
JMSType: null
Transaction Id: BEA1-72BC818FE2BB8C2655C6
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-72BC818FE2BB8C2655C6> <> <1306521257542> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
JMS Message Class: TextMessage
Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
New JMS MessageID: ID:<195581.1306521257536.0>
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
####<May 27, 2011 11:34:31 AM PDT> <Error> <MessagingBridge> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521271384> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: weblogic.transaction.RollbackException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
... 14 more
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1871)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:330)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:293)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1534)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
... 14 more
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
... 1 more
).>
####<May 27, 2011 11:34:31 AM PDT> <Warning> <MessagingBridge> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521271384> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
.)>@Tom, thanks for your hints and sorry for my delayed response. Here are my answers to your queries…
-- Does messaging work, without any exceptions, when only one bridge is active?
It works fine when only one node of the cluster is active. -- I'm not familiar with Tibco monitoring, but I suspect that the "message-out count on TIBCO" stat doesn't always imply that there's a duplicate message. It could mean that an initial message delivery attempt failed, it's transaction rolled back, and the message was redelivered. Redelivery after a failure is normal - the original delivered message, if one actually made it onto a WebLogic queue, should be discarded by WebLogic when its failed transaction eventually rolls back (before its ever handed to a consumer application).
You are absolutely right. The mismatch in count was due to redelivery attempts. We could see that as soon as we turned on trace in TIBCO-- The posted stack traces look like they may be JVM stdout/stderr scrapes, which are often automatically truncated, for example, see the "... 8 more" listed at the bottom of one of the stack traces below. There might be more information in the full stack trace for the "Resource manager is unavailable" exception. Full traces are logged in each WebLogic Server's log files.
I tried redirecting the output and even set "stdout Stack Trace Depth:" to -1 but I am not albe to see the complete trace.-- The setTransactionTimeout NullPointerException error message looks like it is collateral damage from the original reported "Resource manager is unavailable" exception that's thrown earlier during the enlistResource() step. If you are truly getting duplicates, then I think this is a clue that the bridge is somehow (stupidly) trying to proceed with forwarding the message despite the fact that there's no current transaction on the thread...
I have a case open with Oracle support and we have extensive debugging turned on. Here is what the engineer came back with. There is an issue with XA transactions in JCA adapter when it talks to third party providers like TIBCO. Since the resource names are not unique across the cluster, a XA transaction is started on multiple nodes in the cluster for the same message. All transactions abort but the message is persisted and TIBCO redelivers the message since the connection is severed when the transaction aborts. We were able to reproduce this scenario at will with our setup and Oracle was able to reproduce the issue too. -- Can you check the state of the message on the WebLogic Q? The fact that a message is shown on the WL console doesn't necessarily mean that the state of the message is visible (it could be waiting for the transaction to commit - something that apparently never happens). On the console: Services -> Messaging -> JMS Modules -> [module name] -> [destination name].
Our consumer was getting duplicate messages. This confirms that the console was not giving us incorrect information. The console showed that 2/3/4 messages were in "current" state when we expected only one message. -- Make sure that the bridge's Tibco destination is a Tibco queue not a Tibco topic (it's happened).
Yeah we made sure it was a Queue. -- Can you post your bridge and destination stanzas from your config.xml?
Will try to do this shortly but have to strip out lot of information. -- I vaguely recall that there was a problem with untyped connection factories in Tibco at one point (not sure). You might want to try changing the Tibco configuration to spin-up "XA Queue Connection Factory" instead of just an "XA Connection Factory" (plus modify the bridge configuration accordingly).
We tried this but it didn't eliminate this issue. One thing we did notice however was that the number of rollbacks were greatly reduced.
Here is the workaround that Oracle is suggesting: Create pinned destinations and assign it to a distributed queue. This will keep the transactions local and hence eliminate the duplicate transactions and rollback. We tried it and it eliminated the dups issue. However I discovered another bug during my testing. Our cluster messaging mode is "Unicast" and message forwarding from zero consumer queues to queues with consumers fails. We have four/five nodes in the cluster and two consumer threads. I observed that the zero consumer queues always forward to one queue in the cluster that has consumers. The forwarding stalls when I bring down the node that has consumers. Again, we were able to reproduce this issue at will and Oracle has acknowledged that it is a bug. They've reported that Unicast fails without any warning whereas Multicast fails with a warning in the log. We have observed this message forwarding stalling even with UDQs.
I have another case open for an issue where our message bridges that transfer messages from TIBCO to WLS stalls after sometime. The status is shown as active but it is not doing anything. The server instance shows stuck threads trying to roll back a message. TIBCO logs indicate that it is receiving a request to rollback a transaction but it is not finding the transaction to rollback. The only way to recover from this condition is to restart the cluster. I am fairly confident that he root case for this issue is again the XA transaction issue. I changed our UDQ to pinned destination in one environment and we are no longer seeing dups or bridge stalling there. Hopefully Oracle can resolve the message forwarding issue.Thanks again…. -
Duplicate text messages in messages+
I am receiving duplicate text messages when using messages+ as my default app. A msg I send is sent twice & I receive messages twice. This just started about two weeks ago. I have had my galaxy5 for two months. I turned off the stock app yesterday & I am still getting & sending duplicate texts. Cache has been cleared without success. Help please!
Try the stock app in safe mode. You may need a factory reset
-
Duplicate Text Messages - Pantech Crux
Hello, I began receiving duplicate text messages once I upgraded to a Pantech Crux. The duplicates are not labeled *duplicate message* like others, rather they are just received about 30 seconds after the original.
This happens regardless of sender but does not always happen. It will also happen regardless of whether or not I read the first message before the duplicate arrives.
Is there any solution to this? Will I be charged for all the duplicates?
Any help is appreciated.
Thanks,
Brandonjmm823 wrote:
Are you still receiving duplicate txt msgs? I've been having the same issue since May and I keep getting the run around. My husband and I have the same phones and first they told me they had to do a "network" update that was supposed to take place on June 27. I've still been receiving them. I called again last friday and the gentleman from tech support told me to do a device software update on my phone. I did that and I'm still getting double txts! Very frustrating!!! I've called around 7-8 times! Not getting anywhere with my problem! During the month of July I had gone over my txt limit and the lady I talked to gave me a higher text package and wasn't going to charge me the difference. But when she did that she canceled my text messaging package and I got billed $180 for text messaging! Not very happy with Verizon right now! We are debating if we should cancel our service thru them and go to another company!
jmm823,
I definitely understand your frustrations and would like to assist with correcting this for you! Our Product Development Team is aware of the issue and are working diligently to provide a permanent fix. In the meantime, I would be happy to review your account and correct the text package and billing for you. We definitely do not want you to have to consider leaving Verizon Wireless! I will send you a message, and you can reply with the requested information.
Thank you again for your patience, and for choosing Verizon Wireless! -
Hi All,
I am trying to confirm if our HP Openview team have installed the correct MIB for IP SLA. They have informed me that they have installed the CISCO-SYSLOG-MIB and CISCO-RTTMON-MIB mib's but in the output from the an alert I am seeing the following information
rttMonNotification: to router01 |0x0a fd 65 0c|1|1|258|240|220|0x00 00 00 00
rttMonNotification: to router01 |0x0a fd 65 0c|1|1|205|240|220|0x00 00 00 00
I have nothing to compare if this correct message format I should be seeing, and have been unable to find anything via Google. Does anyone have any examples for the type trap message.
The version of IOS is "Cisco IOS Software, 2800 Software (C2800NM-SPSERVICESK9-M), Version 12.4(15)T10, RELEASE SOFTWARE (fc3)"
Thanks
IanIt does not appear they have loaded the CISCO-RTTMON-MIB correctly as this trap is defined in that MIB. What you're seeing are the following varbinds:
rttMonCtrlAdminTag : (empty)
rttMonHistoryCollectionAddress : 10.253.101.12
rttMonReactVar : rtt(1)
rttMonReactOccurred : true(1)
rttMonReactValue : 258 (or 205) ms
rttMonReactThresholdRising : 240 ms
rttMonReactThresholdFalling : 220 ms
rttMonEchoAdminLSPSelector : 0.0.0.0 -
When iMessage is turned on, it greys out my phone number (used to be stuck at "Verifying..." but now it just says "Phone"). Only my Email is clickable but it won't let me remove it. When I go to my Message app, only Text Message-ing is an option (showing green instead of the usual blue). This applies to all my friends who are iPhone users. I've tried Network Restart, phone restart, phone hard restart, shutting down Settings, shutting down Messages, ... now what else can I do? Please help. Much appreciated.
"Anyway, look at Settings > Messages > Receive At
I assume you mean a row that says "Phone" and your number is grayed out there. That is normal."
Check. Good that it's normal
"Now go down to "Caller ID". There you should see your phone number, probably checked, as well as your Apple ID (alternate message ID)."
Check. My phone number has a check mark next to it.
If all that's true and you have iMessage "On" in Settings > Messages, you're good to go!
Nope. My texting is still stubbornly green and it says "Text Message" in the field rather than "iMessage." -
I've done it 6 times the steps you mention to get this thing to work but still it doesn't work for me. I've downloaded iTunes, installed it, and again the same message it's going on Error message received - Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
I've deleted iTunes, Apple Mobile Device Support, Apple Software Update and Bonjour, restart my computer and downloaded again (6 times) and still doesn't work for me. What should I do?I deleted all Apple products you mentioned above (iTunes, Apple Mobile Device Support, Apple Software Update and Bonjour), deleted the prior downloads I had previously tried to install and then emptied my recycle bin. Then I started with a new download of iTunes before the problem was solved for me.
It really ***** that Apple does not give any direct support for its own products.
Good Luck -
Is there a way to view messages received on another phone in my plan?
Is there a way to view messages received / sent on another phone in my plan?
There are ways. The easiest would be to look at the phone.
Another way would be if Verizon Messages were installed on the phone in question and you could log into the MyVerizon account for the line in question to view SMS/MMS messages to/from that phone. Of course any messages sent via iMessage would not show up in Verizon Messages as they are not SMS/MMS messages. For those, you could possibly log into the Apple ID account on another Apple device to view those, but then SMS/MMS messages would not show up there.
This is why I prefer to disable iMessage on my iPhone so that I don't have to look in multiple locations to read my messages. I prefer to have all my messages sent/received via the same messaging platform so that I don't have to look in multiple places to view/manage them. -
BPM: System_Error" SOAP fault message received
Hi,
We upgraded SAP system from 4.7 to ERP2004 on 09/17/05.
We have XI-3.0 version from last 9 months and this BPM was working good so far. We have not changed anything in it except we upgraded the SAP system.
We are using ABAP proxy from SAP to send "userid"
message to XI-BPM and then it would make a Synchonous call to SAP system to get roles of those "usrid".
In the first step when it is sending data to XI an exception is raised and in the second step when it tries to make synchronous call to SAP we are getting error:
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="System_Error">SOAP fault message received</Trac
<Trace level="3" type="System_Error">SOAP fault code: Client</Trace>
<Trace level="3" type="System_Error">SOAP fault string: Error during c
I noticed that the XML name tag looks different now
Before upgrade when message was successful.
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:MT_ECA_USRID xmlns:ns1="http://bcm.edu/common"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<USRID>CLARKSON</USRID>
<USRID>2_MA140016</USRID>
</ns1:MT_ECA_USRID>
After upgrade when message is failed
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:MT_ECA_USRID xmlns:nr1="http://bcm.edu/common">
<USRID>AABULIMI</USRID>
<USRID>AB147899</USRID>
<USRID>ACHALL</USRID>
</nr1:MT_ECA_USRID>
You would notice that
" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
missing after upgrade.
I would appreciate if anyone could help me.
MrudulaHi,
Can you paste the full error message. Also take a look at the default trace log in Visual Admin. Set the logging for soap to debug.
Naveen -
How do I enlarge the font in messages received and sent? I have the font set at "13", but the appearance on my screen is very, very small. When I try to "customize the toolbar" to look like the tool bar above this message, I am unable to do so. Please advise. Thank you.
Thanks MartinR, yes the Toggle bars can be adjusted so that I can see all the tracks - just in the smallest setting - however this also creates a huge area of grey which serves no other purpose than to "use up screen space". If this is deliberate then there is nothing one can do - since presumably the additional profit made on screen sales is more important to Apple, than the combined annoyance to those working on a 13" laptop. Of course a 15" screen or even 17" screen may make this wastage less obvious. Please indicate that this is all incorrect and explain why it is important to have space waiting "for additional tracks", even if I have no intention of making additional tracks. If that is the answer then perhaps additional space to the left and right of the timeline would be useful in case I wish to make a 30 minute film, so that it could be placed there without having to drag anything. It may be that I am expecting software than can be tailor adjusted, each parameter to the desired level as in professional items and since this is a cheap consumer program it is not possible.
I bought Final Cut Pro for a lot of money (when it first appeared it was thousands and not just hundreds) but never used it since it was too complicated and tedious, but maybe there, this problem of screen wastage does not occurr, perhaps someone can advise! I could go back and reinstall it, but it was made for 10.2.8 and not 10.6.8 so it would not run on this macbook. I recently bought an old 15" TitaniumPowerbook (from 2005) and despite running at 1MHz the response time on it is "instantaneous" - amazing to not have the almost half second delay on many commands - graphics appear nearly immediately (just 5 milliseconds delay) and this makes working so much more enjoyable, not having the (350ms) stutter of 10.6.8 which we all get used to after our initial disappointment.
Thanks for your help! -
Error Message received when trying to edit page
I have received this following message when trying to edit a site page in SharePoint or in SharePoint designer. I haven't ever seen this error message before and am not really sure what the issue is. I am not the owner of this
particular site but merely an owner of a specific page on this site so I am limited in my ability to troubleshoot but the actual owner is stuck on what the potential issue is and how to resolve this. I manage and own three seperate sites myself and have never
seen this issue so I am trying to assist in any way I can. Any ideas whats the issue?
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(),response filters, HttpModules,
or server trace is enabled.
Details: Error parsing near '
<!DOCTYPE html PUB'.Hi,
We need more information of the issue page. As suggested by Mokhtar, you could check if the issue is related to permission.
The issue might also occurs to the page which is developed based Ajax registration. Then it might be caused by AAM configuration.
And you could also refer to the link below if the issue is related to SSRS:
http://blogs.msdn.com/b/sowmyancs/archive/2012/07/10/ssrs-javascript-error-sharepoint-sql-reporting-services.aspx
Regards,
Rebecca Tu
TechNet Community Support -
Have recently updated Adobe Reader and now unable to open downloaded documents - Message received is could not open 'file name.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). When I check the file it shows Zero KB downloaded but the file appears - any suggestions?
Obviously your download was not successful.
What is your operating system? How exactly do you download such files?
Maybe you are looking for
-
On this Mac, I have access to the company network (and Internet) via the Ethernet port (gateway 192.168.1.1). At the same time, I have a second (backup) Internet link via Wi-Fi, to a different ISP (gateway 192.168.3.1) At the least, I would like to v
-
What's the best type file to export to?
Please help. I am simply making training video's and am no expert in FC. My problem is... If i export to just straight .mov the file is Way to big. If i try to export to mpeg4 then it's way to crappy looking. isn't there some sort of medium? is there
-
Hi, I would like to know if its possible to have the data dictionary of PCM. To help us understand the PCM database structure. Thank you!
-
Ok.. Miriam.. help me out here.. I need the number to apple customer relations again.. My imac g5's sleep light has messed up again.. System isnt crashing yet though.. all i have done lately is burn like 5 dvd's and encoded them.. that should not dam
-
Transfer G4 Address Book to new Imac
Hi! Please tell me where my address book is located on my G4. I will transfer it using firewire to my Imac but not sure where it is. Once found do I just copy it to the new Imac location? Thanks, Mike