IP SLA Not enabled

Hello friends,
In IPM i have discovered all devices fron CS but only 4 are IP SLA enabled,It is showing for 3switches 3560 POE switch
Model              SW Version              SW Image
WS-C3560G-48PS     12.2(35)SE5             C3560-IPBASE-M
and for 1 No's 2960
c2960-lanbasek9-mz.122-44.SE6/c2960-lanbasek9-mz.122
-44.SE6.bin"
It is not showing me on my core switches,Can u tell me which version of IOS is needed to support IP SLA or i missing something to enable it. The SnmP Read/write credentials are correct

Hello,
Some of the IP SLA features are supported on 6500 IOS listed below:
s3223-ipbase_wan-mz.122-18.SXF16.bin
Still it is not showing me in the IPM  as a IP SLA feature enabled ?????
Awaiting ur replies friends.

Similar Messages

  • Mercury CUDA not enabling when using NVIDIA GeForce GTX 285 on Apple Mac Pro after Mavericks install

    Been using the same setup since CS5 with the Mercury CUDA running perfectly. After recent upgrade of OS X to 10.9 Mercury CUDA is no longer available and only lets me run with the OpenGL or software options. Im using a NVIDIA GeForce GTX 285 for apple computers. Here are the results for the GPUSniffer program in the latest Premiere Pro 7.1.0 files. The LAST line make me chucle because it the first on the list of supported card in the "cuda_supported_cards.txt" file. Anybody else seen this?
    --- OpenGL Info ---
    Vendor: NVIDIA Corporation
    Renderer: NVIDIA GeForce GTX 285 OpenGL Engine
    OpenGL Version: 2.1 NVIDIA-8.18.27 310.40.05f01
    GLSL Version: 1.20
    Monitors: 1
    Monitor 0 properties -
       Size: (0, 0, 1920, 1080)
       Max texture size: 8192
       Supports non-power of two: 1
       Shaders 444: 1
       Shaders 422: 1
       Shaders 420: 1
    --- GPU Computation Info ---
    Found 1 devices supporting GPU computation.
    OpenCL Device 0 -
       Name: GeForce GTX 285
       Vendor: NVIDIA (Apple platform)
       Capability: 1.2
       Driver: 1
       Total Video Memory: 1024MB
       * Not enabled by default because it did not match the named list of cards.

    found a link from a couple of days ago on a creative cow forum post one of the poster saying they are from adobe stating this
    Re: Mercury Playback Engine MacPro
    by Peter Garaway on Nov 12, 2013 at 9:49:16 am
    Hi Wendell,
    Sorry for the inconvenience. NVIDIA is currently working on drivers that support CUDA on Mavericks 10.9 with some of the older NVIDIA cards such as the GTX 285 and the Quadro 4800.
    For others interested, the Quadro 4000, K5000 and GTX 680 ect... work with CUDA in 10.9.
    Best,
    Peter Garaway
    Adobe
    Premiere Pro
    I have latest CUDA drivers, so i guess i am just waiting till a proper update that have the fixes to support my card.

  • Why is the 'Choose icon...' button in the Options tab of the field property dialog box not enabled?

    I am using Adobe Acrobat Professional XI running on Windows 8.
    This “feature” has been bugging me for some time now. I remember it happening when I used Acrobat 9 Professional (Windows XP) and it is still happening in Acrobat XI Professional. I think I figured out a situation when I can reproduce this “feature” conistently and I hope someone fixes this.
    Try the following and see what happens:
    1. Acrobat Professional is not open.
    2. Launch Word and start editing a document (or some other authoring tool that can generete PDF document).
    3. After editing the document, generate a PDF version of the document.
    4. Launch Acrobat Professional and edit the PDF document generated in 3.
    5. Add a button.
    6. View the button's properties.
    7. Change the Fill Color property in the Appearance tab to none.
    8. Change the Layout in the Options tab to Icon only.
    Now here is what bugs be. Shouldn’t the 'Choose Icon ...' button be enabled? It is not enabled after step 8. It is possible that 'Choose Icon ...' button is enabled for some of you. I this case, it would be nice if at least one of you who experience the same bug say so in this thread so that Adobe doesn't think I am sending them on a wild goose chase.
    I can enable it by selecting a different tab and then returning to the Options tab. A similar thing happens when reverting back from 'Icon only' to 'Label only' but I am not sure how to reconstruct a scenario for this one.
    Here is the dialog box for one instance when I noticed the bug.
    Regards,
    John

    You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

  • BitLocker not Enabled on HP ElitePad 1000 G2

    I have an HP ElitePad 1000 G2 that I am using MDT to apply our 8.1 x64 Update image.  This task sequence works fine on all other systems on which it has run.  On the ElitePad, when the task sequence completes, BitLocker is not enabled.
    Running manage-bde-status returns:
    Disk volumes that can be protected with
    BitLocker Drive Encryption:
    Volume C: [OSDisk]
    [OS Volume]
        Size:                 115.58 GB
        BitLocker Version:    2.0
        Conversion Status:    Used Space Only Encrypted
        Percentage Encrypted: 100.0%
        Encryption Method:    AES 128
        Protection Status:    Protection Off
        Lock Status:          Unlocked
        Identification Field: Unknown
        Key Protectors:
            TPM
    If I look in the BitLocker applet on the control panel, it says "OSDisk (C:) BitLocker is waiting for activation"
    the ZTIBDE.log just stops at:
    Attempting to intiate ProtectKeyWithNumericalP@ssword
    <Message containing password has been suppressed>
    A successful system shows:
    Attempting to intiate ProtectKeyWithNumericalP@ssword
    Success protecting Key with numerical p@ssword
    If I click Turn on BitLocker in the control panel applet or run the following commands:
    manage-bde -protectors -add c: -recoverypassword
    manage-bde -on c: -recoverypassword
    The recovery key protector is created and uploaded to AD and BitLocker shows as enabled.
    Any ideas to why this is happening?

    after some more investigation, I found the following article
    http://netecm.netree.ch/blog/Lists/Posts/Post.aspx?ID=80 and adding the registry key referenced in the article fixed the issue.

  • Drill by is not enabled in BO 4.0 WebI report

    Hi,
    In one of my report I have to do Drill by. But when I right click on the dimension I am able to see only Drill Down that is enabled.
    Drill by is not enabled. Please let me know how to enable Drill By in BO 4.0 WebI report.
    Thanks in advance
    Lavanya

    Hai
    Enable drill mode right in BOE 4.0
    http://www.sdn.sap.com/irj/scn/web-intelligence40-elearning-all
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0e40af9-0d6a-2e10-b58a-c4ecde511a6e
    Thank u

  • Firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result.

    firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.

    Glad you seem to have sorted things out.
    The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

  • Why firefox 3.6 downloads all of the files again after restartarting the browser from a website if the "clear history when Firefox closed" is not Enabled?

    We have a corporate website, we officially support FF3, FF4, IE8 and IE9. Our web site is quite big, so we really need browser caching, first time page load is around 15 seconds. With files in the cache getting new page is less than a second.
    Everything works perfect except with FF3. With FF4, IE8, IE9 if we are on the website, clicking everywhere is fast, the page is in the cache. If we restart the browser, it is still fast, it loads files from the cache.
    But with FF3 we have a problem. Every time we restart the browser, it is loading the files again from the server, instead of using the local cache (checked with Firebug). I can reproduce the problem anytime, it is the same with every FF3 instances. I double checked, the "clear history when Firefox closed" option is not enabled.
    Could you advise please how to use the local cache either after browser restart?
    Thank you!
    Chris

    Just read that the default memory storage on FF is set to 5 mbs. You can up that by clicking on tools, advanced and overriding the default and set it to 50 mbs (if you use lots of tabs) or 10 mbs (if you use just a few).
    I open a blank tab and clear the cache periodically, while I am working. I can have several tabs open and watch videos on Youtube, by doing this. Have you cleared your cache?
    Since I have an older computer, I've also used CCleaner for years. I use it often, but always before signing off. You can get it free...search for CCleaner, download from Pirifoam free. I didn't change any of the settings and it clears crap left behind from uninstalling programs, clears all browsers at once of: cookies, history, passwords, etc. I love it!
    I had freezing, before using the "open blank tab, clear the cache" thing. Now I have no problems. Plus, as I said...you can change the default memory usage for FF and that should help too.
    Hope this helps! Good luck! :)

  • I can't use home sharing because it says Bonjour is not enabled.  So I went to administrative tools and started it.  Restarted my computer and home sharing still isn't working

    I can't use home sharing because it says Bonjour is not enabled.  So I went to administrative tools and started it.  Restarted my computer and home sharing still isn't working

    I have also tried repairing Bonjour in adminstrative tools and still a no go! Frustrated!!! Looking for another idea

  • Remote Desktop Connection - cannot proceed because authentication is not enabled

    Hello,
    I try to connect via RDP from a Windows Server 2008 R2 to another 2008 R2 Server.
    I always get the error message.
    The connection cannot proceed because authentication is not enabled and the remote computer requires than authentication be enabled to connect.
    On the target machine the Remote Settings are set to:
    Allow connections from computers running any version of Remote Desktop.
    Firewall is disabled on both servers.
    Therefor I do not understand why I get an error message, that authentication is required.
    The target box is a nearly fresh syspreped machine with all current Hotfixes installed.
    I already found a lot of people having that problem by using XP (old RDP client), but no one seems to have this problem when connecting from 2008 R2 to 2008 R2.
    Thank you very much in advance for every hint.
    BR
    Matthias

    Hi Matthias,
    First I would like to confirm if you have deployed RDS (Remote Desktop Services) and you got the error, if so, please check this option
    TS Configuration, >> RDP-Tcp Properties >> change the Security Layer to "Negotiate"
    Then Recycle the TS Gateway service.
    Refer to:
    Unable to connect to Server using the Remote Web Workplace (RWW) Small Business Server 2008
    If this issue has nothing to do with RDS, and I suppose you used the cmd "mstsc" to remote access. This issue may also occur because of the version of mstsc, please make sure it has been upgraded to the new version.
    In addition, Did you have another newer server available like Server 2012? So we can test and try to use Server 2012 to remote access Server 2008 R2, and check if the issue persists.
    If there is anything else regarding this issue, please feel free to post back.
    If you have any feedback on our support, please click here.
    Best Regards,
    Anna Wang
    TechNet Community Support

  • Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

    # Question
    Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

    Same PC as I used to post the question. When I go to the "plug in check" page, it shows I am up to date and it is not disabled.
    Java(TM) Platform SE 6 U24
    Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers 1.6.0.24

  • Got error: Location Code is not enabled in the XML Gateway Server

    Hi,
    When I perform Compliance rule screening on GTM - Globel Trade Management,that I defined GTM as an Trading Partner on EBS R12.1.3,
    GTM can send response to EBS,but I see the following error message via Transaction Monitor on EBS workflow:
    [The Standard:OAG, Transaction Type:ITM , Transaction SubType:EXPORT_COMPLIANCE and Location Code GTM6.2 is not enabled in the XML Gateway Server. Pls check your Setup.]
    On EBS,I defined an ITM Partner for GTM,named 'GTM6.2',according to the document created by you: ITM Setup.doc
    and I also finished the following steps:
    1. ITM Application Users
    2.ITM Partner Service Types
    3.ITM Parameter Setup
    4.Order Type Creation: ITM Only
    5.Customer Creation: create a customer named 'GTM6.2', also enter 'GTM6.2' as EDI Location
    6.Define Transactions on XML Gateway as following:
    <Header>:
    Party Type: Customer
    Transaction Type: ITM
    Transaction Sub Type: EXPORT_COMPLIANCE
    <External Transactions (Lines)>:
    Standard Code: OAG
    External Transaction Type: ITM
    External Transaction Sub Type: EXPORT_COMPLAINCE
    Queue: APPLSYS.ECX_IN_OAG_Q
    7.Define Trading Partners on XML Gateway as following:
    <Header>:
    Trading Partner Type: Customer
    Trading Partner Name: GTM6.2
    <Trading Partner Details>:
    Transaction Type: ITM
    External Transaction Type: ITM
    External Transaction Sub Type: EXPORT_COMPLAINCE
    Map: WSHITEIN
    Source Trading Partner Location Code: GTM6.2 (same as the value what defined in EDI Location for customer)
    I think the combination of External Transaction Type, External Transaction Subtype, Standard Code,Source Trading Partner Location Code
    should be existing once done above steps, I have no idea why the error prompted.
    Does someone can tell how to trace the error?
    Thanks,
    Rambler

    user12254038 wrote:
    Can you send any supporting documents on ITM Setup? My client is implementing ITM for the first time and I wanted to know more details on how it works in R12.1.3 version of EBS?Oracle International Trade Management (ITM) Partner Integration: Specifications [ID 572524.1]
    International Trade Management Integration [ID 259691.1]
    How Can I Tell if International Trade Management is Installed or Not? [ID 742539.1]
    What are the Required Setups for International Trade Management (ITM) Flows in Shipping Execution? [ID 782861.1]
    What Patches Provide the Latest Fixes and Enhancements for ITM Adapter? [ID 465122.1]
    How to Generate Debug Information From ITM Adapter for XML Processing [ID 738925.1]
    How to Generate Debug File for International Trade Management (ITM) [ID 1294853.1]
    Thanks,
    Hussein

  • Why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?

    Hi All,
    Does anyone know why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?
    I just found this out after I installed bootcamp and Windows 7 on my Macbook 13" with P8600 2.4Ghz CPU 2GB RAM and 250G HDD after more than a year of using it.
    After I installed the CPU monitoring widget on Windows 7 and CPUZ, I noticed that the lowest Freq that my Macbook operates even with <5% CPU load is only 1.5Ghz and VID @1.0V.
    I installed Coolbook on OSX to confirm what I saw on Windows. I was surprised that SLFM is not visible in Coolbook which is the same result I got from Windows 7 CPU monitoring widget and CPUZ.
    I checked with our local Mac support and they got the same results for all of Macbook 13" Aluminums late 2008 model. SLFM is not visible on Coolbook which means, it is not enabled.
    I tried to install Coolbook on my wife's Macbook Pro 13" 2010, which has the same spec, P8600 2.4Ghz CPU and 250G HDD. The only difference is the memory which is 4GB RAM. There, SLFM is enabled and works just fine, running at 798Mhz @0.875V.
    Can anyone please help confirm if this is really the case for Macbook 13" late 2008 model?
    Because I checked the Intel P8600 Datasheet and SLFM should always be enabled. Otherwise, it will affect battery life as well as long term reliability of the CPU.
    I would appreciate if the Macbook and Macbook Pro owners in this forum can help confirm using Coolbook the status of SLFM in your own Macbooks. You may use any other tool in checking the SLFM and share it with us if you believe it is more reliable and better than Coolbook. Thanks.
    Message was edited by: jespada

    BTW, Here is what I got from Coolbook for comparison. As you can see the late 2008 Macbook has no SLFM info.
    Legend:
    SLFM - Super Low Freq Mode
    LFM - Low Freq Mode
    HFM GV - High Freq Mode (Geyserville/Speedstep)
    HFM - High Freq Mode
    Macbook 13" Aluminum late 2008 P8600 2.4Ghz 2GB RAM 250GB HDD
    Freq VID
    SLFM -- --
    LFM 1596Mhz 1.0000V
    HFM GV2 1862Mhz 1.0500V
    HFM GV1 2128Mhz 1.1000V
    HFM 2394Mhz 1.1375V
    Macbook Pro 13" Aluminum 2010 P8600 2.4Ghz 4GB RAM 250GB HDD
    Freq VID
    SLFM 798Mhz 0.8750V
    LFM 1596Mhz 1.0000V
    HFM GV2 1862Mhz 1.0500V
    HFM GV1 2128Mhz 1.1000V
    HFM 2394Mhz 1.1375V
    Message was edited by: jespada
    Message was edited by: jespada

  • I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

    I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

    More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

  • XP Mode in Windows 7 on T400, CPU virtualization not enabled (but it really is) error

    I installed Windows 7 Pro 64bit on my T400 this week. I'm trying to get the XP mode VM to run because the VPN's for work aren't compatible with Windows 7 yet. When using the tool to verify compatibility of the T400 with Microsoft's new VM software it says that hardware virtualization is not enabled. According to microsofts help page that means the laptop is compatible but the CPU virtualization needs to be enabled in the bios. I followed their instructions to enable it but there was no change. I returned to the bios to verify & sure enough, it's on. I installed XP mode vm & vm software but it wouldn't run stating the above problem.
    Has anyone else run into this or know how to fix/get around it?
    Thank you,
    Chad
    Solved!
    Go to Solution.

    I found the answer in another forum. Apparently just restarting isn't enough to make the switch work properly. The computer needs to be shut down & left off for a few seconds then started for each change to CPU virtualization to be applied.
    So, I disabled it again. Turned it off for a few seconds. Re-enabled, turned off for a few seconds. Then it worked after booting to windows.
    Cheers,
    Chad

  • ACL is not enabled for this user  OSX 10.5

    I am running OS X 10.5 on a Mini Mac.
    It was a clean install, everything went smoothly except for configuring the mail server.
    I created my users as I normally do using Workgroup manager.
    However 2 out of 3 of users I created can not log into the IMAP server.
    You get the error message ACL is not enabled for this user.
    What is the ACL and how do I enable it ?
    Thanks
    Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
    Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user
    Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
    Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user

    Hi there
    I had the same problem and I found this post which fixed it:
    http://discussions.apple.com/thread.jspa?threadID=1244694&tstart=0
    Hope it works for you too!
    Chris

Maybe you are looking for