Ip sla operations with different keys for the same destination

  Hi all,
the customer wants to use different ip sla operations for the same destination (ip sla responder). From the first source router he uses key key1 and from the second source router he uses key key2. The ip sla responder responds only for the first router which uses the key key1.:-( Is it a normal behaviour? Can I use different keys for different ip sla operations for the same ip sla responder?
See the configuration on the responder:
key chain test
key 1
  key-string 7 *key1*
key 2
  key-string 7 *key2*
ip sla key-chain test
ip sla responder
He tried to use ip sla responders on:
Ciscu 2911
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M3, RELEASE SOFTWARE (fc2)
Cisco 881
Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Thank you.
Roman

Thomas,
Have a look at:
http://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-2mt/sec-conn-dmvpn-share-ipsec-w-tun-protect.html#GUID-2B448241-FD10-4F3B-BFF8-DFD44982D235
If you're using one tunnel source you need to use one ipsec profile, unless you're running (a) p2p tunnel which you're not in this case.
While you MAY have some luck with sharing/unsharing among different interface I'm afarid it will not be ever mentioned as supported.
The situation will change with upcomfing 3.10 and 3.11 IOS XE releases (and corresponding IOS releases).
M.

Similar Messages

  • Invoice posting with different currency for the same PO

    Hi,
    Can we post the the Invoice with different currencies for the same PO.
    For example.
    PO has Qty 100 pcs.  amount 100 USD
    GR   Qty 100 pcs.
    Is it possible to post Invoice of 50 pc with 50 USD, and 50pcs with some other currency.
    Any sugggestions pls.
    Thanks,
    Satya

    Hello
    As per my knowledge, that is not possible.
    And in whjat scenario, we need to do that?
    In MIRO header itself we have the vendor currency, so it is not posbile to maintain different currency in different line items in MIRO.
    If you want, you can do MIRO in different currency that what is in PO.
    In the example given, you have o post 2 invoices, one for 50 qty in USD and the other 50 in different currency in other invoice transaction by giving the currency in basic data-invoice header and then only press ENTER after giving the PO number.
    Hope this helps
    Regards

  • Several layered effects of the same kind but with different adjustments for the same layer

    Hi,
    I wonder if it there is an easy way to have several different instances of e.g. glow or bevel and emboss on the same layer.
    I know I can achieve this by using smart objects or a duplicate layer with zero blending.
    I just wondered if there is a way to do this directly in the layer effects.

    Hi emil emil,
    thx for your answer!
    I wasn't even refering to different objects on the same layer, btw. it would be enough if I was able to layer e.g. different bevel and emboss on top of each other (With different colors, softness  and size.)  But I guess the answer remains the same.

  • Schedule parallel activities on different resources for the same period

    Hi,
    I am trying to create a PPM where I need to define parallel activities on different resources for the same time period.
    For example:
    Input prod: P1
    Output prod: O1
    Now I define a dummy activity A1 to define this consumption i.e. 1 PC of P1 gives 1 PC of O1.
    Now I have got 3 resources R1, R2, R3.
    I define 3 activities A2, A3, A4 for these resources.
    Now I have to arrange activities A2, A3, A4 such that they start simultaneouly after activity A1 and also end simultaneouly.
    The Fixed duration for all the resources is 1 week.
    My requirement is that out of these resources system should plan for demand considering the resource with minimum capacity
    i.e. kind of bottleneck resource.
    I am using CTM engine for planning.
    I have defined A1 as predecessor for all the 3 activities A2, A3, A4 and after completion all the activities have a dummy successor activity  S.
    But this setting is not working and PPM is not getting exploded, If I use a normal linear relationship between activities it works fine but my requirement is not getting satisfied.
    Can anyone please help me in this case or suggest some alternate method.
    Thanks & Regards,
    Sanjog Mishrikotkar

    Hi,
    You cannot use the old solman key as systems are on different server.
    I think you have to delete the old Dev system and then generate new solman key.
    Thanks
    Sunny

  • Mix source data with different granularity into the same fact table?

    I have two transaction tables "Incident (157 columns)" and "Unit (70 Colums)". For every "Incident" that happens there could be one or more records in the "Unit" table.
    As part of my data mart design, I have merged both the tables into a single Fact "Incident Fact (227 Columns)" and inserted the records from both the tables with a join condition between them [incident.IN_NUM = Unit.IN_NUM].
    Is this correct, is my question? or am I mixing source data with different granularity in the same fact table. Appreciate your help.
    Best Regards
    Bees

    Bees,
    Are the measures from 'Incident' , repeated for a given incident where it has more than one record in the Unit table ? If so, then the sum(indicent.measure) will give an incorrect result, no ?
    What requirement is there to physically merge the tables together outside of OBIEE? With OBIEE you could have one logical 'fact' table to present to report users, which sourced from seperate Incidents and Units tables and would stop the incorrect aggregations occuring. A common modelling piece in the same way would be Order Headers and Order Lines, quite common in OBIEE to have a logical 'Orders' fact which contained both Order header measures and Order line measures, this translates to your Incidents -> Units relationship.
    To do what I've mentioned, is relatively straight forward, you need a 'Dim - Incident' with two levels, Incident and Unit, mapp the unique identifiers in as the level keys and then use these levels to set the content levels correctly in your 2 logical tables sources for logical 'Fact' , ie Incidents LTS at incident level, Units LTS as units level.
    Hope this helps, let us know if you get stuck.
    Cheers
    Alastair

  • How can I share the home folder with different accounts on the same mac?

    Hi, here's a question:
    How can I share the home folder with different accounts on the same mac?
    The whole point being not to have to install all my apps, and move all my files each time between users.
    The second thing would be to be able to modify one document on one account, and have it changed on the other account without having to copy it.
    I would like to have a pro and a private account on my mac.
    Thanks for you answers,
    Doug

    Your apps should not be installed in your home folder--they should be in /Applications where every user can access them.
    If you want to share things between users on the same Mac, use the /Users/Shared folder. Keep your home folder private. Trying to defeat the protections on the home folder subfolders just gets messy. I've never bothered to figure out all of the problems associated with it so I can't explain how to do it.
    Even with using Shared, you would need to alter the ACLs on the shared folder in order to allow both users to modify the documents.
    You must create a Group in Users & Groups and put each user in that group. Then create a folder inside /Users/Shared where you want to share the various files.
    Then, add an ACL to the shared folder that gives the group special permissions. on that folder.
    sudo chmod -R +a "<sharinggroup> allow delete,chown,list,search,add_file,add_subdirectory,delete_child,file_inherit,directory_inherit" /Users/Shared/<sharing folder>
    Replace <sharinggroup> and <sharingfolder> with the name of your group and your folder. Then, run the command in the Terminal.
    With that ACL, each user in <sharinggroup> will be able to alter the files created by any user in the group in that <sharingfolder>.
    Essentially, the client OS is not designed for true file sharing among the individual users. It is designed to isolate each user account from the others.

  • Lost my playlists when I tried to share libraries with different accounts on the same MacBook computer

    lost my playlists when I tried to share libraries with different accounts on the same MacBook computer

    Hi dprette,
    When setting up iTunes to share a single music library between multiple user accounts on one computer you should follow the steps in this article -
    iTunes: How to share music between different user accounts on a single computer
    http://support.apple.com/kb/HT1203
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • [JAXB] Several different prefixes for the same namespace

    Hi!
    I have generated some code from 2 schemas using JAXB. One of them (the main) defines some elements and the other one defines values for those elements. Then, when runring my code, I get an XML document with elements from the main schema an elements from the other one. However, elements from the second schema are qualified with different names. That is:
    <party>
    <ns3:uid xmlns:ns3="http:/schema1.com/schema1">CN=User1 - RSA/RSA,OU=IAIK,O=TU Graz,C=AT</ns3:uid>
    <ns4:role xmlns:ns4="http:/schema1.com/schema1">client</ns4:role>
    </party>
    As you can see, I get two different prefixes for the same namespace.
    Could you be so kind as to tell me if there is a way of getting only one prefix for each namespace, please? Do I have to modify JAXB compiler's properties???
    Thanks a lot in advance.

    No, I don't know how to do that. I also don't think it should matter. Are these multiple prefixes causing you any problems other than offending against Occam's Razor?

  • Unable to copy database with different name in the same instance

    I had a huge database and wanted to try some change optimization changes.
    So wanted to make a copy of the database along with data in the same instance.
    I have tried copy database wizard several times but always see the error as in attachment.
    Can someone let me know how to troubleshoot further?
    If this is not the correct way please suggest how do i copy a database with different name in the same instance along with data.

    Hi Nandu,
    From the screenshot, the error 1813 happens when corrupt database log is attempted to attach to the SQL Server. To work around this issue, please preform the following steps, for more details, please review this
    blog.
    1. Create a new database with same name which you want to recover. Make sure that the MDF file and LDF file have same name with previous database data and log file.
    2. Stop SQL Server. Move original MDF file from old location to new location by replacing just created MDF file. Delete the LDF file of new location just created.
    3. Start SQL Server. At this point, the database is in suspect status.
    4. Make sure that system tables of Master database allows to update the values. Please note that you will be performing this in query window.
    Use Master
    go
    sp_configure 'allow updates',1
    reconfigure with override
    go
    5. Change database mode to emergency mode.
    SELECT *
    FROM sysdatabases
    WHERE name = 'DatabaseName'
    BEGIN
    UPDATE sysdatabases
    SET status = 32768
    WHERE name = ' DatabaseName '
    COMMIT TRAN
    6. Restart SQL Server. Then execute the following DBCC command in query window to create new log file.
    DBCC TRACEON (3604)
    DBCC REBUILD_LOG(databasename,'c:\yourdatabasename_log.ldf')
    GO
    7. Reset the database status using following command.
    sp_RESETSTATUS yourdatabasename
    GO
    8. Turn off the update to system tables of Master database running following script.
    USE MASTER
    GO
    sp_CONFIGURE 'allow updates',0
    RECONFIGURE WITH OVERRIDE
    GO
    9. Reset the database status to previous status.
    BEGIN
    UPDATE sysdatabases
    SET status = (value retrieved in first query of step 5)
    WHERE name = 'DatabaseName‘
    COMMIT TRAN
    GO
    Make sure that you have done all the steps in order and restarted SQL Server where it is mentioned. Also run SQL Server Management Studio as administrator.(Right click-> Run as Administrator)
    Thanks,
    Lydia Zhang

  • Can we get a output in different languages for the same configuration

    Hi All,
    Can we get a output in different languages for the same configuration done in NACE. or it is language specific.
    They have symbols which have values both in german and english. But when we run the transaction we are getting the output only in german language.We want the out put in english
    language.
    Thanks in Advance.
    Rajesh

    A Smartform can be maintained in many languages other than the language that it is created. Translations for the texts have to be maintained for this purpose.
    To maintain the translations:
    Go to transaction SE63 in R/3.
    Go to menu Translation->R/3 Enterprise->Other Long Texts
    Select the object type in the pop up. Smartform(SSF) object type is found under Forms and Styles(FS).
    Enter the name of the Smart form and choose the source and target language. This would open a screen with the Smartform code in Source language on the top and an editor with the same code in the bottom.
    Find the text for which you need to maintain the translation and insert the translation in that place. As usual after required texts are maintained Save and Activate.
    To see the translated Smartform create an output type and assign the smartform and the driver program to this output type. In the transaction that sends output to this smartform, select the output type and select the language in which the smartform has to be displayed (translations have to be maintained in this lanuage).This will give the smartform in the required language.
    Madhavi

  • Java-puzzlers...Why 2 different outputs for the same line

    Here, why it is giving 2 different outputs for the same set of lines
    Line-1 and Line-2 are both same.But giving 2 different results ???
    /*java-puzzlers*/
    public class Elementary {
        public static void main(String[] args) {
             System.out.println(12345 + 5432l);  /*Line-1: Original statement- didn't modify*/
          System.out.println(12345 + 54321);  /*Line-2: I wrote - I delete 12345 + 54321 and wrote the same thing again*/
    }

    kjshikal wrote:
    one of them is a longkjshikal,
    For the third and final time. Please stop resurrecting old threads like this.
    Thank you for your co-operation.

  • If I already have a particular app under one apple Id and I purchase the same app under a different Id for the same device, will it overwrite or replace the previous or will I have two of the same app on the same device??

    If I already have a particular app under one apple Id and I purchase the same app under a different Id for the same device, will it overwrite or replace the previous or will I have two of the same app on the same device?? 
    I'm asking because I purchased an app with an id that has been cancelled so I cannot update that particular app. I can purchase the app with my new id but I don't want to do so if its going to erase all the data I have with the previous purchase...

    Figured it out. Thanks.

  • Different authorizations on different cubes for the same characteristic

    Hello,
    Is it possible to implement different authorizations on different groups for the cubes characteristic?
    For example a user should be authorized to see just the data of company code 101 on Cube A but he should see the data of all company codes on Cube B (Cube B also contains the company code. ":"-Authorization is not an option)?
    In transaction RSECADMIN it is possible to insert the "special characteristics" Acitivty, InfoProvider and Validity into an authorization. But standard setting for InfoProvider is * and I get an error message if I want to modify for just 1 Cube because the characteristic "InfoProvider" (SAP Content) isn't marked as authorization relevant.
    Can you please answer:
    1) If it is possible to implement different authorizations on different cubes for the same characteristic?
    2) What is the function of the special charactristics if I can't maintain the values?
    Thank you
    Johannes

    Hi there,
    Yes it is possible.
    The new authorization concept created union also based on InfoProvider Characteristic.
    You have to change in rsd1 transaction the characteristics 0TCAACTVT, 0TCAKYFNM, 0TCAIPROV and 0TCAVALID to be authorization relevant.
    So you can do this:
    Create two authorizations in rsecadmin like this:
    Aut_1:
    0comp_code: 101
    0TCAACTVT: 03 (activity of display)
    0TCAKYFNM: * (all key figures)
    0TCAIPROV: Cube A
    0TCAVALID: * (authorization valid for ever)
    Aut_2:
    0comp_code: *
    0TCAACTVT: 03 (activity of display)
    0TCAKYFNM: * (all key figures)
    0TCAIPROV: Cube B
    0TCAVALID: * (authorization valid for ever)
    Now in rsecadmin give both authorizations aut_1 and aut_2 for the user.
    If the user opens a query built on cube a he will be having authorizations only for company code 101. If the user opens a query for cube B he will be having authorizations for all the company codes.
    Diogo.

  • Outlook-2 different entries for the same person (but not the same email)

    i was asked to switch from outlook 2007 to outlook 2013 as a trial.
    For some reason, I get two different entries for the same person (but not the same email), one which is the name as normal and one where the name has ' around it. In the below example:
    I have 24 emails sent to Ciaran and then a further 14 sent to 'Ciaran'
    The email address for both is exactly the same and it does not seem to matter if I create a new email or reply to an incoming one.
    I switched back to Outlook 2007 and the issue is still the same.
    any suggestions?

    I would say that there is no way to prevent Outlook from doing it, it dependents on how the sender formatted the sending address, not the recipient who replies.
    To fix this:
    Open the message and double click the address and view source
    Just replace the generated Display As with the Display As you want
    Thanks,
    Ethan Hua CHN
    TechNet Community Support

  • Can two peeps use iChat with different accounts on the same computer?

    What do I do to REMOVE an old AIM account and replace it with a new account in IChat?
    Can two peeps use iChat with different accounts in the same computer?
    (Actually, two people share a laptop, but one of us cannot use her AIM account cuz mine is in iChat already... And, when traveling, I have the computer - and I would like to use iChat on the computer...)

    In iChat 4 you can have more than one AIM Valid name logged in at once.
    AIM valid = AIM, @mac.com or a MobileMe name.
    What you are then stuck with is that iChat is linked to one Buddy Picture and The one Mac User Account's Address Book which may or may not have Full Names, emails details, or a Nickname in iChat 4 linked to the Screen Names.
    Whilst it does let you both log in whilst using one Mac User Account there are drawbacks about who uses the keyboard and reading meesages from the other persons Buddies.
    8:50 PM Sunday; November 30, 2008

Maybe you are looking for