IP status is in Yellow but job is finished

Hi ,
I am working on BW system in which I am loading the data from IP to Data Target directly without PSA.
Here I am facing a problem that load is failed but If I go to IP Monitor, I am able to see that request is in yellow color.
I have gone to ST22 but thera is no dump.
Would you please tell me what could be the root cause fo this one.
Regards,
K.Krishna.

Hi krishna,
What is the source system? -- ecc or flat file?
from the load monitor screen check the below options...
First check if the source system job finished or not?
Check if there are any HUNG TRFC from source to BW system which did not processed.
if the source system job is finished , check for the TIDs from the job log and go to TRFC screen and try to manually flush the hung TRFCs...the load will goto green.
Regards
KP

Similar Messages

  • Technical Status is in yellow but total status is in Red

    Folks,
    My Init load failed due to RFC errors, in the monitor Total is showing Red Status but the Technical is still showing yellow status and I am unable to delete the failed PSA request to re-start my Init load, please let me know how to resolve this issue.
    Thanks,
    Kumar

    Hi ,
    did you cancel the job in source system .. first cancel that job  and the delete that request ..
    request might take long to delete due the more no of records ..
    check the deletion job in source system wether its progressing or not .. In general you can follow this if you face this kind of issue further ..
    regards,
    shikha

  • Job completed but status showing still yellow

    Hi Experts,
    One of full load status tab showing yellow, but the job completed when i checked in SM37.
    I am loading from ODS to Cube there is no PSA. we are using 3.5 version.

    Hi David,
    Check the load in the details tab weather all the data packets are in green status.If at all the idocs are hung or TRFCs are hung you may face this issue. try to manually flush the hung Idocs and TRFCs.
    If everything is fine wait for the PID  process to finish- some times it happen the PID might be running at the background.
    If everything is fine n the status of the request is yellow -try to change the status of the load to green.
    Regards
    KP
    Edited by: prashanthk on Oct 5, 2010 2:22 PM

  • How to stop the process chain showing status as yellow but no process step

    Dear Friends,
    How to stop the process chain showing status as yellow but no process step is running in that process chain.
    We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
    Please guide me.
    Thanking you in advance.
    Regards,
    Shubhangi

    Hi,
      At times even I have faced this situation.  During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
    Regards,
    Raj

  • All mappings completed, but job in status 'busy'

    hello,
    we have a process flow that is scheduled to run every day; when i check the execution all the steps / mappings are executed fine, and have status 'completed';
    however the main parent process i.e. the scheduler job stays in status 'busy' (object type: scheduled job)
    is this normal?
    at first i thought it would not restart becuase of that, but no, i can see that the next day it restarts and runs fine as well;
    id appreciate some tips
    thx
    rgds

    hello
    i recieved confirmation from oracle, thats exactly what is happening
    so you were right about that
    thanks for your reply
    rgds

  • Data load status stay in yellow

    Hi,
    My BW platform is BW 701 with SP 5.  I am loading ECCS data hourly with 3.5 method which include transfer rule and update rule.  Most of the time the data load are successfully completed.  The total number of records is about 180,000 records and extracted in 4 packets. Once in a while, randomly one of the data packet stay in yellow could not complete the load.  But, in the next hour data load, the data loaded successfully.  We know it is not data issue.  Does anyone know why the data load is not consistently?  Any suggestions are much appreciated.
    Thanks for your suggestions,
    Frank

    HI Frank,
    This might be because some of the TRFc or Idcos might got hung.
    Check the source system job got finished or not.
    If the source system job got completed check the TRFCs and IDOCs if there are any hung TRFCs and IDOCs.
    in the monitor screen --> menu bar environment > select job overview> source system (enter id n pwd ) check the job status.
    once its done to check the TRFCs
    Info package>Monitor->Environment> Trasact Rfcs-->In source system --> it will diplsay all the TRFCs check for your hung TRFCs and try to manually flush the TRFC(F6).
    If idocs are hung change - process the IDOCs manually.
    Regards
    KP

  • Status remains as Yellow, for no data

    hi ,
    in our master data load process chain, a datasource which has 0 records in the sourcesystem returns 0 records in BI. but the status remains as yellow , instead of green.
    since the status is yellow the next process is not getting triggered. only if we manually change the status to green, the process chain continues. wht shall we do to change the status to green automatically.

    Hi DOLLY,
    you need to cofigure  a small setting at Infopackage for this.
    RSA1-> infopackage -> scheduler -> Trafic light color for Empty request -> select green and save it.
    for 0 to 0 records load will show as Green.
    Regards
    Daya Sagar

  • My Airport Extreme is flashing yellow, but I still have internet connections and iPhone access to the network.  Does this mean that my network has been hacked or something else?

    The light on my Airport Extreme is flahing yellow, but I still have network access to the internet with no issues.  PLus, I can still get into the network with my iPhone, too.
    DO I have a problem (such as net work being hacked)?
    Was going to shop and don't want my cc number scattered all over creation.
    Thanks.

    Suggest the following:
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click directly on the word Status (2nd line on the summary page)
    A window will open to explain why the amber light is blinking and offer suggested actions to remedy things.
    If everything seems to be working OK, it might simply be a message that an update is available for your AirPort Extreme.
    Now you know what to do next time the amber light is blinking.

  • HTTP Status Code 200 Received But Error During Response Parsing

    Hi Experts,
    We are testing a simple Proxy(ECC) to File scenario in QA. This interface was working fine in Dev but we are getting the following error here in QA:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    <!--  Call Adapter  -->
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">OK_BUT_NO_XI_MESSAGE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>HTTP Status Code 200 Received But Error During Response Parsing: No XI Response Received XML element Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    We searched other threads but could not get any solution. Please provide suggestions.
    Thank You.
    Regards,
    Anandan

    the problem was due to high volume message (247 MB ) ...Java stack was not able to process this huge message ,that is the reason ,it started automatically  and as a result  , "HTTP Status Code 200 Received But Error During Response Parsing" due to unavailability of AFW during Call adapter step in the pipeline processing...
    We have done the following activities in order to solve this problem....
    increase the value of  icm/HTTP/max_request_size_KB to 512MB
                                        icm/wp_roll_timeout   to maximum
                                        HTTP TIMEOUT to 1800 sec
                                       icm/wp_roll_timeout   to maximum
                                         mpi/total_size_MB  to maximum
                                       mpi/buffer_size  to maximum
    and then increased the maxthreadcount ,maxcontentlength using config tool...
    and also increased the java heap size to maximum....
    After doing everything ,the file has been successfully processed....
    the problem has been resolved...

  • PO workflow showing status as APPROVED.. but in Oracle status is"IN PROCESS

    In Our 11i , one of the PO workflow showing status as APPROVED.. but in Oracle Still showing the status as "IN PROCESS".. could you Please suggest solution...?

    Hi,
    What is the application release?
    Please see if these docs help.
    Troubleshooting Purchasing Approval for Documents in "IN PROCESS" or "Pre-Approved" Status [ID 225017.1]
    How To Diagnose An Issue In Requester Change Order Processing [ID 453551.1]      
    How To Reset a Document From In Process or Pre-Approved To Incomplete/Requires Reapproval For Isolated Cases [ID 390023.1]
    Thanks,
    Hussein

  • JTA Transaction :status should be active, but it is STATUS_COMMITTED = 3

    Hi,
    I have query how to have the JTA transaction in SEI(Service endpoint interface) generated by WSDL.
    I have a MDMListener (using MDM API) which looks for a recordchange in MDM repository which needs to be send to PI7.1 via soap request.
    1) I had imported the WSDL from ESR(PI) and generated outside-in proxy.
    2) Created ejb3.0 stateless session bean using NWDS
    3) Created web service client application by generating the WSDL again (by Generate client)
    4)Added a method callPI()with Service and i set the context with endpointaddress property as the soap location of the sender agreement configured in PI7.1.
    The damean thread listener(EventDispatcher) looks for MDM record change and it calls the method callPI() from ejbsession bean by lookup to transfer the record to PI7.1 system via webservices(web method). I hit the below error.
    Exception com.sap.engine.services.ts.exceptions.BaseIllegalStateException: Status of ( SAP J2EE Engine JTA Transaction : 06223ffffffa20048fffffffe ) should be active, but it is STATUS_COMMITTED = 3.
    at com.sap.engine.services.ts.jta.impl.TransactionImpl.registerSynchronizationWithoutStatusChecks(TransactionImpl.java:672)
    at com.sap.engine.services.ts.jta.impl.TransactionImpl.registerSynchronization(TransactionImpl.java:641)
    at com.sap.engine.services.ts.transaction.TxLevelSynchronizations.addSynchronization(TxLevelSynchronizations.java:118)
    at com.sap.engine.services.ts.transaction.TxManagerImpl.registerSynchronization(TxManagerImpl.java:829)
    at com.sap.transaction.TxManager.registerSynchronization(TxManager.java:303)
    at com.sap.engine.messaging.runtime.j2ee.sapengine.SAPTransactionManager.registerSynchronization(SAPTransactionManager.java:126)
    at com.sap.engine.messaging.impl.util.tx.TxController.<init>(TxController.java:83)
    //Method in the ejb stateless session bean
    @WebServiceRef (name="DistributeMasterDataService") DistributeMasterDataService service;
    @RelMessagingNW05DTOperation(enableWSRM=true)
    public void callPi(DistributeMasterDataRequestType req) {
    port.distributeMasterDataOutA(req);// the distributeMasterDataOutA is the method available in SEI..Here is the issue on JTA
    For the first time the message(req object)transmits to the PI successfully,but for the second call i hit this JTA Transaction :status should be active, but it is STATUS_COMMITTED = 3.
    I tried chanding the transactionmanagement from container to bean.
    @TransactionManagement(value=TransactionManagementType.BEAN)
    @TransactionAttribute(value=TransactionAttributeType.REQUIRES_NEW)
    I wanted to know how can i have the JTA transaction status in SEI(service enpoint interface)java method distributeMasterDataOutA.Since it is an interface i dont know what annotation can be used.
    If its possible i can try this UserTransaction,
    http://help.sap.com/saphelp_nw04/helpdata/de/f6/7a8df922db4ab79342b46c48dac7d0/content.htm
    ut.begin() & ut.commit(),so that everytime this method is called it will treat as a new transaction..
    Let me know if you need more details??,Any idea provided would be great.
    Thanks
    Sabarinathan
    Edited by: Sabarinathan Selvaraj on May 7, 2009 12:31 PM
    Edited by: Sabarinathan Selvaraj on May 7, 2009 12:32 PM

    Hi,
    May be i have not mention the issue clearly.Let me know mention the issue with details.
    I have a MDMListener (using MDMPI) which looks for a  recordchange in MDM repository which needs to be send to PI7.1 via soap request.
    1) I had imported the WSDL from ESR(PI) and generated outside-in proxy.
    2) Created ejb3.0 stateless session bean using NWDS
    3) Created web service client application by generating the WSDL again (by Generate client)
    4)Added a method callPI()with Service and  i set the context with endpointaddress property as the soap location of the sender agreement configured in PI7.1.
    @WebServiceRef (name="DistributeMasterDataService") DistributeMasterDataService service;
         @RelMessagingNW05DTOperation(enableWSRM=true)     
         public void callPi(DistributeMasterDataRequestType req) {
    port.distributeMasterDataOutA(req);// the distributeMasterDataOutA is a method available in SEI
    For the first time the message(req object)transmits to the PI successfully,but for the second call i hit this JTA Transaction :status should be active, but it is STATUS_COMMITTED = 3.
    I tried chanding the transactionmanagement from container to bean.
    @TransactionManagement(value=TransactionManagementType.BEAN)
    @TransactionAttribute(value=TransactionAttributeType.REQUIRES_NEW)
    I wanted to know how can i have the JTA transaction status in SEI(service enpoint interface)java method  distributeMasterDataOutA.Since it is an interface i dont know what annotation can be used.
    If its possible i can try this UserTransaction,  ut.begin() &   ut.commit(),so that everytime this method is called it will treat as a new transaction..
    Let me know if you need more details??,Any idea provided would be great.
    Thanks
    Sabarinathan

  • Airport express with my MacBook Pro flashes yellow but . . .

    is working. It normally always went to green when the signal locked but for some reason now it continues to flash yellow but is working.
    I looked for another area to post this but couldn't find where it is covered.

    It should actually be in you Applications/Utilities folder. Part of the system install. If it is working okay, it is not a great problem the light flashing. But some things will not work right at some point. If you are moving soon, why not wait till you get there and set it up again. I am pretty sure it is a software thing. Have had it myself.

  • "Waiting for iPhone... " alwayz stuck at this stage...Already tried using DFU mode and many times...but always stuck at this stage. However in iphone APPLE LOGO and Status bar is coming but not processing ahead!

    "Waiting for iPhone... " alwayz stuck at this stage...Already tried using DFU mode and many times...but always stuck at this stage. However in iphone APPLE LOGO and Status bar is coming but not processing ahead! Even my device is not jailbroken.
    iTunes recognize this device and giving option for Restore. i go for it and in the continue process WAITING FOR iPHONE /// at this stage it stuck.. and keep serching like for something and in the iPhone APPLE LOGO and Status bar showing..but not processing further.

    Shaishel,
    Did you resolve this?  I am having the same problem!  Let me know if you have any suggestions.
    Thanks

  • Time capsule blinking yellow but working?

    It's blinking yellow, but I'm online and the latest backup was an hour ago.  What goes on?

    Find out as follows:
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the amber dot
    A window will appear with a message to explain why the amber light is blinking.....along with suggestions to remedy the "issue"

  • Run status is still "processing" but the distribution status is "posted"

    Hi all,
    We have run a process yesterday.
    The process' run status is still "processing" but the distribution status is changed to "posted". what could be the reason for this? i have never seen such thing in process monitor.
    Please help me.
    Thank you,
    Bye.

    And does the report posted and accessible from the monitor ?
    Peopletools version ? OS ? Database ?
    Did you try to refresh the page (not through the refresh button but with your web browser) ?
    Did you try to disconnect and reconnect ?
    Nicolas.

Maybe you are looking for