IP Temp Monitor in Lookout 5.1

I am trying to use Lookout 5.1 to communicate with an IP based Temp. Monitor from Sensatronics. The device sends data over TCP on port 80. Any suggestions on how best to set up this device to be monitored by Lookout? An unformatted string is produced when http://ipaddress/temp is entered into a web browser. The string looks like this: Office Temp|67.2|Garage Temp|-99.9|Probe 3|-99.9|Probe 4|-99.9

Hi neilius77,
I'm glad to hear that you decided to use the IPASCII object. Instructions for how to send commands to your device are included in the object help file. To access the help file:
1) Add an IPASCII object to your process.
2) Right click on the object to access the properties.
3) Click on help.
The help file will detail how to use Request, RequestFormat, and Send datamembers which should allow you to send the /get command to your device.
I hope this helps you get the communication working properly.
Thanks for contacting NI,
Marcus G.
Applications Engineer
National Instruments

Similar Messages

  • Recommendations for server rack temp monitoring?

    Our server room isn't large, we only have one rack with two Xserves, an Xserve RAID and a few other things. But temperature is obviously a concern and I worry about the day when the portable AC unit kicks the bucket and I'm away from the office.
    Does anyone have recommendations some kind of temp monitoring device with email notifications, maybe web monitoring?

    At work, we use a rack-mount Senturion Environment Monitor, it monitors the temp, humidity, etc. It can send SMS and email alerts, and you can monitor it on the web, it just needs power and a network connection. We got it when our AC actually did kick the bucket and 50 servers overheated. :-/

  • It ALL works (mostly)!!! CPU Temp Monitor??

    Just finished assembling my new system and loading it up this weekend, and amazingly, it works. Even with CL3 ram it runs much faster than a P4 1.8A on SiS 645/DDR333 board I had. I am amazed at how big a difference there is in the way XP Pro loads and retrieves data and how smooth it sets up. I did not have to load ANY drivers! A huge step forward from 98SE.
      The only issue appears to be that the temperature monitor is out to lunch (So was my last board the SiS645 one, it did the exact same thing) for both CPU and Case. I installed a seperate case system to monitor temp and it gives me 22 deg C after I rearranged the airflow from the fans. I am thinking of drilling out the stock heatsink and inserting one of these temp monitors to real time monitor the CPU.
      Has anyone come up with a good way to really monitor CPU temps with this board??

    Hey,
       I loaded up MBM (after I figured out what it was and where to find it). It seems pretty good: The case reads 37 deg C (my independent sensor reads 27 deg and bios says 47) and CPU reads 47 deg (bios says 57).
       The real questions is : My -12 volts reads -6, and I have played with the settings to find the right sensor, and every sensor I select changes all the voltage readings. Is there a specific selection for readings that sets this up right?
       Also, I found a Lian-Li temp sensor with thin tape probes that is designed to be set between CPU/Heatsink to provide real time accurate monitoring for chips (theres two, so I plan on doing CPU and NB), so I will have real data instead of hoping it is right. (19.00 US). Nice little 3.5" or 5.25"  models avail in black, silver or beige.
    Nick

  • Core temp monitor program for hp touchsmart 610-1250

    Hi,
    Re: HP TouchSmart 610-1250, 64 bit, Win 7.
    This is a new computer, my first all-in-one, and I want to monitor core temp. My CPU gadget tells me this has no core temp monitor system. Is it possible to download a monitor?
    As an all in one, I'm concerned about heat build up, since I'm using it all day.
    Any info is appreciated.
    Thanks
    A
    This question was solved.
    View Solution.

    Have you tried SIW? (System Information for Windows by Gabriel Topala) I highly recommend it. Go to the sensors page after you open it, and then It should tell you.
    Please give Kudos. What other kind of recognition could I get?
    Have I solved your problem? Mark solution as accepted.
    I try to hate Macintosh. I really do. But I can't bring myself to hate any electronic device.

  • MSI GeForce 6600GT temp monitoring

       Hi, i was just wondering if there was a pre-modded / tested bios available that enables temp monitoring in MSI's 6600GT VTD-128. I didn't think i could hex it myself so i just wanted to know if anyone had success doing it.
    Thanks,
    ~Snikkle

    Hi you could check those sites like this :  Enabling Temperature Monitoring on the nVidia 6600GT
    but I wont recommend you to do that if you are don't know a lot about computers and updating/editing bios.
    kind regards
    and remember do it at your own risk.

  • Temp monitor for ppc?

    what cpu temp monitor can be used for ppc mac mini or ppc mac?
    using http://www.bresink.com/osx/TemperatureMonitor.html the widget one and i think that it is reporting the harddisk temp and not the cpu temp since it has the only option of "SMART Disk hardisk model here" and gave me a 45C-49C temp

    I don't think there is a CPU temperature sensor on the PPC mini.

  • Best temp monitor program for K8N and 6800GT?

    I'm looking for a temp monitoring program that will display the following temps:
    CPU
    Chipset (system)
    GPU
    Core Center is ok but it doesn't allow for precise history and it doesn't display GPU temp.

    The only thing I can suggest is a hardware thermistor and display, I have a GMC X-21 case which has a small temperature display on the font, and you can place the thermistor anywhere you like. I have it in between 2 fins on my CPU heatsink and it reads the temperature exactly the same as corecentre.

  • Preferred cpu temp monitor softy?

    what is the good cpu temp monitoring softy for 875pneo? i mean the accurate one. I've used aida and core center but yield different result. dont know which one to use... thnx!

    I have been using motherboard monitor for years and is simply the best freeware monitor around.  It even does OSD scripts with xml coding.
    Motherboad Monitor
    G16aByT3

  • Help enabling temp monitor on VGA

    i have an MSI G4TI4200 working perfectly for sometime overclocked to 310/640.not bad.....after taking off the heatsink on the VGA i found a temp diode next to the GPU so i wandered why it never worked.........any way i want to know how to enabled the temp monitor on my VGA so i can see it on my nvidia applet.......can i use that trick fo G6600 by altering the bios using the HEX editor and reflashing......i mean does that tirck work for all nvidia card.........any idea are appreciated thnx
    P4 2.6C OC to 3.2
    2xA-data ddr500 dual
    seagte sata hdd 80GB
    MSI G4TI4200 64mb 8x
    NEO 2 -PLS plat
    Vantec 400W psu

    i am using the 71.84 the latest one from Nvidia website...........but nothing shows in the tab plus i have the latest coolbits registry ..........that didnt help ether.........one could this mean.....that the temp diode on the VGA is just for decoration    .........or it doesnt work. I think it could be a Bios problem.....my Bios right now is A0 for the VGA maybe i need to flash it. Any ideas of how to do that thnx alot 

  • MSI 6600 GT question...Temp monitor on 6600GT?

    I'm about to return my XFX 6600GT because of problems. How is the MSI version of the card? Is the temp monitor available under Nvidia properties?

    Just my copy to another reply:
    I have the same card but use nVidia drivers to give me a temp read on the GPU.  I have loaded from scratch and like the nVidia settings screens because they give you more options.  Below is my overclock with MSI drivers and nVidia drivers.  The overclock is about the same so it depends on your use of the card...automated with MSI & DOT, manual with nVidia.  My GPU Temp read is around 47c to 48c.
    K8N SLI - winni 3000+ oc 220x3=660 HTT
    MSI 6600GT x1 oc 560/1.12 Ghz = nVidia Drivers only
    Corsair value RAM 512x2 oc 200:200 2.5,3,3,7 prime95 stable 2.7v 220 memspd
    3DMark05 = 3949  PCMark04 = 4052
    K8N SLI - winni 3000+ oc 218x3=654 HTT (MSI level 5 maxed DOT) with CnC enabled
    MSI 6600GT x1 oc 555/1.11 Ghz = MSI Drivers only (MSI level 6 maxed DOT)
    Corsair value RAM 512x2 oc 200:200 2.5,3,3,7 prime95 stable 2.7v 218 memspd
    3DMark05 = 3833  PCMark04 = 4023
    To get accurate temp reads on your CPU and system and much other stuff, I use Everest (www.lavalys.com) and with quick reboots it seems fairly accurate.  My CPU core is usually between 35c and 37c and my system temps are around the same.....................

  • Temp Monitor issue

    I just did a clean install on my blackbook, and reinstalled the temp monitor 3.9 version.
    Now the issue is that it does not read the processor temps but just the harddrive temp. Also it prompted me that I needed to install some intel drivers.
    Problem is I clicked NO by accident. Is there anyway I can get the drivers again??
    Does anyone know what these drivers were, or where I can download them??
    Any input would be apreciated.

    In the Temperature Monitor menu named "Monitor", there are two choices called "Install driver for extended x86 support" and "Uninstall..etc". If you haven't installed the driver, the install option should be available (with the other grayed out). Click to install.
    It 's a kernel extension needed to read the CPU temps.

  • Temp. monitor for Neo4 SLI?

    Can anyone recommend me a program that's like Motherboard Monitor for the Neo4 SLI?  I'm looking for a program that will display the temps in the system tray.  Too bad MBM is discontinued 

    the current system temp monitor program i'm using is Systool. it autodetects your mobo and videocard. it has a whole bunch of other stuff too. it even detects videocard temps. check it out @ http://www.techpowerup.com/systool/
    there's ALOT more you can do with it too. but that's for you to find out.

  • How can I set up two control panels in two seperate monitors using Lookout version 4?

    I have Lookout version 4, and dual monitors and i am trying to make it so two seperate control displays come up at the same time upon opening in the different monitors.  The guy at tech support said it is not possible, so Iwas wondering if anybody has a possible creative solution to this problem?

    Run two instances of Lookout (not possible in LO6+)
    You would need to manual put each process on each display
    Mike
    Mike Crabtree - Lead Developer
    Destek of Nevada, Inc. / Digital Telemetry Systems, Inc.
    (866) 964-6948 / (760) 247-9512

  • 1090T Temp monitoring question

    Hey all..Got a question..In my BIOS my CPU temp is 41c to 42c..And in windows when I run Core Temp 0.99.8 its telling me its 20c to 24c...and its the same with CPUID hardware monitor 20c to 24c..So really what do I believe??
    My CPU is overclocked to 4.3ghz and running fine..with 1.53v..Just would like to know its real temp..I can touch the heatsink and it is cool..

    What does hardware monitor and Core Temp state when you run all the cores full tilt using Prime95 or some other CPU(all cores) stressing program?  When you're in the bios, the cores are running full tilt.
    BTW, the finger is a poor heat sensor.

  • Motherboard and temp monitoring tool.

    looking for motherboard monitoring tool like core center.
    system specs.
    msi 790gx-g65
    amd phenom 2 x3 720 be
    nvidia gtx 260 graphics
    wd 250gb sata2 hd
    4gb kingston hyperx ddr3 memory
    cool max 600w psu
    windows xp x64
    system is stable and running fine , just like to have something like core center that will run in the background to give me a quick temp check.
    tia

    look here:
    https://forum-en.msi.com/index.php?topic=107133.0

Maybe you are looking for

  • Setting Permissions for a BMP

    The home interface lookup is successful. However the following error is thrown when I attempt to execute a method on the home interface: CORBA NO_PERMISSION 0 No; nested exception is: org.omg.CORBA.NO_PERMISSION: minor code: 0 completed: No Is there

  • Certificates to 802.1x LEAP ethernet and wireless clients

    Hello guys, I have just configured a radius server, active directory domain controller and certificate server on one windows 2003 pc. I have generate a self-signed digital certificate and used certificate server to generate a root certificate from it

  • Data Upload for Transaction KE51 through LSMW/BDC

    Dear All, I have a requirement where in i have to upload the customized data for Transaction KE51 and KS01 using LSMW or BDC or BAPI. Please let me know the best possible procedure to achieve this task and how to do it. What are the validation we nee

  • Safari crash when opening top sites

    hi i need help, does anybody else have this problem? for the past 2 days, everytime i try opening my top sites, safari crashes. i keep sending the crash report but nothing happens. i already tried reinstalling the safari application but i still have

  • Pleeeaaseeee Help - Basic authentication with Servlet

    All, A user from my site is allowed to access another site that requires Basic Authentication(apache). This is what I have done in my servlet, but does not work: String userpwd = "username:pwd"; response.setHeader("Authorization", "Basic " + userpwd)