Ip tunneling --Video Conferencing

I am doing video conferencing project...For systems behind firewall and proxy,
i planned to use ip tunneling....But i am very new to this concept....Please help me how to do it.....please help me to find materials also

Also cisco CCME support video conferencing using Cisco VT advantage or the videostation 7985. Interoperate with other vendor should not be a problem. It is a feature of IOS and runs on all the routers so you can chose from the 2801 and upward.
Hope this helps, if so please rate post!

Similar Messages

  • Video conferencing between CCM and CCME

    Hi,
    We are having CCM4.1(3)at central location.In branch location we are having CCME 4.0(2).Both the locations are connected through leased circuit. We enabled Video on IP Phone which is registered to CCM and also we configured CCME for video. When we start doing video conferencing between these two location, it's not happenning. In VT advantage it is showing local image on Local & Remote screen. I don't know what is the problem.
    Can you guys please tell me wheather Video Conferencing will work between CCM & CCME over the leased circuit using VT Advantage.
    If it works, please tell me what are configuration parameters i need to configure on CCM & CCME.
    Thanks & Regards

    By default all IP traffic is permitted through a VPN tunnel except broadcast and multicast traffic. It basically is a matter of how the video software you are using works. If it is a multicast application then it will not work through an ipsec tunnel, if it is a unicast application then it should be able to work.
    Also if this video is on the Internet tries to enable split tunnel on the VPN endpoint. Now if the issue is with a video that is on the PC, this might be because a software corruption of the OS, so try reinstalling the VPN Client software

  • Video conferencing in training and event management.

    Hello experts,
    My client wants to configure the video conferencing facility in the training and event management module. Can somebody advice me on that part as in how to do so?
    Thanks and Regards,
    Kanika Talwar.

    Hi
    In Table V_T77TNM_DC
    We need to have the below entries
    TNM                                              CL_HRTNM_VALO_COMPUT_GUI_FR
    TNM       HRTNM00_REPMOD        CL_HRTNM_VALO_COMPUT_GUI_FR
    TNM       MP168400                       CL_HRBAS_INFTY_1684_GUI_FR
    TNM       RPCTNM9S_REP            CL_HRTNM_INFTY_1036_GUI_FR
    Regards
    Kenu

  • Trying to bypass CAC for Video Conferencing using EnableBWPolicyOverride

    Scenario:
    CAC enabled and bandwith policy defined for all company sites. Video bandwidth very restricted (250 Kbps).
    VIP users were granted a Voice Policy with EnableBWPolicyOverride=TRUE (VIP users must bypass CAC).
    Test:
    P2P Video Calls between VIP users bypass CAC, allowing high video resolutions (Ok!).
    Video Conferences between VIP users don't bypass CAC, limiting video to low resolution (NOT ok).
    Is this expected, that Video Conferencing will not respect the EnableBWPolicyOverride=TRUE from the Voice Policy? (I know, it's a VOICE Policy and I'm tlaking about VIDEO. But remember, on P2P video call the bypass worked.
    Any ideas?

    Hi,
    Bandwidth policy override enables administrators to override call admission control policy decisions for a particular user, however, the policy will be overridden only for incoming calls to the user and not for outgoing calls that are placed by
    the user. So I think the policy does not apply to video conference.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Video Conferencing Application Help

    hi all,
    i am planning to devlop a n-user video+audio conference in LAN. what i plan is having a server,and all user logged in will send stream to server and recieve stream from server.Is this approach can be done and more importantly is this the way it should be done? i mean is there any better way around ?
    any help will be appreciated
    thanks in advance
    Gaurav

    hi!
    i am trying to develop a video conferencing application to run on WAN. i am new to JMF and just can't guess how much time it will take. do u have any opinion or experience on this?
    thanks...

  • Says my computer does not support video conferencing?

    Just recently whenever i tried to do video chats it tells me my computer does not support video conferencing? How can i fix this?

    In the Video Menu open the Connection Doctor and go to the Capabilities tab.
    This may give you more info about which things iChat currently thinks it can do and will tell you why It thinks it can not do certain things.
    If it says Low Bandwidth against some items you will need to do as Defcom says and alter the Quicktime > Streaming speed (System Preferences > Quicktime > Streaming) to 1.5Mbps and restart iChat to see the new Speed.
    Also check in iChat menu > Preferences > Video section that the Bandwidth Limit drop down is not set too low. (Ideally here it should be set to NONE unless you are Comcast or Road Runner) Certainly don't use 100kbps.
    8:50 PM Thursday; December 4, 2008

  • HT4534 Mac Mini HD Video Conferencing

    I am considering purchase of a mac-mini for video conferencing.  This article (http://support.apple.com/kb/HT4534?viewlocale=en_US) refers to "built in camera".  Of course, the mac-mini has no built in camera.  I would be using my HDTV for a monitor.  Can I use the Logitech c910 & the mini for HD Facetime?

    I also have a mac mini and am using the Logitech C920.  At the beggining, I had issues with its built in mics not working with FaceTime, but I found a solution for the problem and now all the programs that interface with the camera work great (FT, Skype, iMovie, etc).  If you do buy the C920 run into the same issue that I had with the mic not working, here is the quick solution for the problem:
    Cause of Problem:  The Logitech C920 camera/mic operates on a 2ch-16bit integer.  You can verify this by opening "finder + Utilities + Audio MIDI Setup" and then select the HD Pro Webcam C920 and look at the "Input" Default values.
    The Mac Mini's "Built-In Output" and "Buiilt-In Input" formats were set for 2ch-24 bit integer.  Therefore, the default input and output were out of sync with the C920 default format.
    Solution:  Change the Mac Mini's default Output to "2ch-16 bit integer".  You don't need to change the default Input but it doesn't hurt to do so.  Once you do this, the camera and it's built in mics work on facetime and all other video chat applications.

  • Secure Video conferencing with the ability to record

    Hi,
    I am looking for a flash based secure video conferencing app which has the ability to record conferences.
    I need it to enable a series of helpdesk type sessions and would prefer to use Flash so that the users do not have long set-up times.
    Does anyone know of any off the shelf or open source apps that are out there?
    Thanks

    Well and If you look at any thing by blackberry you can see that it does not match up on its features versus the iPhone. iPhone users and those of us who use it for it's amazing abilities aren't caught up on the fact that it lacks video, or picture messaging. There are other things that are more important to worry about with this phone. Play around with it and you can see that this is a very powerful tool. I switched to AT&T just to get the iPhone. Blackberry's phones have nothing on the iPhone, the way i look at it is the iPhone can only blow your mind away in the next model and until then get used to it's functions. I'd rather know how to use it at it's "simple" state as opposed to it high tech overly advanced possibilities.

  • Newb- Video conferencing with Windows possible and with what Win app?

    Giving video conferencing a shot for the first time. Is it possible to video conference with my (mostly) Windows using friends? If so, what program do they need?

    No Problem.
    For the points
    8:03 PM Monday; October 5, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Video Conferencing with IOS Homogeneous Video Conference Bridge

    Dears,
    I have CUCM 8.6 and 3945 Cisco router with 2 x PVDM-256
    I configured the IOS Homogeneous Video Conference Bridge. and I did the required configurations in the router. and I can see the conferencing bridge is registered.
    I put the conference bridge in the existing MRG and MRGL. But I am not able to do video conferencing. I can get only the audio.
    is there any thing missing ? any reolad should I do ?

    Sure.
    So on the gateway that you have the video conference configured, in which we have guranteed voice as the configuration, you will also add in an MTP profile.  The MTP profile will be configured as software and have the appropriate codec configured that you may be using because of your regions.  We have g722-64 and passthrough on one because we saw the E20's requesting MTP resources from the logs. 
    We also have additional MTP profiles configured for other codecs to include G729r8, etc.
    Register the codecs to CUCM.
    It depends on what you are trying to accomplish but we were shooting for w448p thus made sure that the "Region" for the device pool associated with the Media Resource Group for each MTP was set to 1MB for the video bandwidth.
    I hope this makes since if not I will try to pull down a config for you

  • Video conferencing w/apple tv

    I would like to know if I can do the following.
    1. Get an Apple TV
    2. Get a tv with a video camera (like the Skype compatible ones)
    3. Have a Mac with AirPlay
    And with these three things do a google hangout where the tv would act as the screen and also the video and speakers.
    Basically I want to use it for video conferencing.
    Would this work?
    If so is there a specific tv that's good for this? It seems like to good a solution, to easy...

    airplay mirror is a 1 way push of what is shown on the device
    no commication from the tv goes back so the webcam working is off the table
    but you could connect a webcam to the mac my imac works perfectly fine with both it's internal webcam and my old logitech usb webcam can chooses which one I use
    with a long cable it could be placed on top of the tv

  • Video Conferencing using JSP

    I am working on a interactive application whereby i can communicate with my peer for the purpose of elearning. Some of the functions i need to do is to interface video conferencing, live chat, live application sharing. All this to be real time.
    Anyone any advice on how to go about do it?
    Urgent advcie needed! Thanks!

    I don�t know about the video stuff, but I think that it is possible to use an applet for the chat, and filesharing.
    Andreas

  • Pc-to-pc audio/video conferencing

    I've been looking into the ability of a direct (secure) connection from one Linux machine to another for the purposes of audio/video conferencing.  I know there's stull like ekiga but that requires an account and a third party server.  I'm looking for a solution that would be completely maintained between the two or three linux machines directly (webcam/mic).  What's out there that I'm not seeing in google?

    Also interested, been meaning to move away from Skype for a time now. I've looked/asked around and found opensips. You'll still need a client to manage calls though, I'll probably try out Twinkle. I'm going to spend some time trying to set it up myself. Hope it helps.
    Edit Note: I quickly moved from twinkle to linphone.
    Last edited by milso (2010-12-24 22:48:49)

  • Designing Cisco Video conferencing solution

    Hi All,
    I need to design a single site Cisco IP Video Conferencing soultion which should support web, chat, ISDN and email etc support.
    there will be one conferencing room which will be communicating with other remote or traving users.
    the requirement is that remote or travelling users should be able to have the video conferencing facility with the Headoffice(single site) and vise versa.
    Any help will be much appreciated.
    Regards,
    Waqas

    I would recommend Cisco unified presence server for your deployment with MPX. That will give you chat, voice and video conferencing. If you dont use MPX then you can only do point-to-point video CUPS on its own doesnt support video conferencing.
    YOu can also intergrate with exchange to view meetings and unity to listen to voicemails.
    You can use VTA for the remote clients and 7985 for central site or some sort of tanberg phone if you want a larger screen.
    The remote users are going to have to have a pretty low latency connection to get good quality video/voice.
    HTH
    Matt

  • IP Video conferencing best practice - Tanberg/Cisco hardware

    We are currently experiencing intermittant issues with our Video conferencing internal and external network with intermittant screen fragmentation. We have separate VLAN's configured on our internal network for the Video traffic only.   We use the movi client on the with the majority of our remote users.  I'm wondering what is the best practice based in setting up and support a Video conference network.

    Have you set up QoS policies for video?
    I have a very good network readiness document you are welcome to, if you want to ping me your email address?
    I can't seem to copy it properly into the tech support app on my iPad, drop me an email to [email protected] and I'll send over the info - should help!
    Sent from Cisco Technical Support iPad App

Maybe you are looking for

  • Exporting Frame content to Word?

    Hi, I am working on manuals that have been done in both Frame 7.2 and Word 2003 and am hoping to migrate to a newer version of Frame some day. Right now I'm trying to update a few Word-based manuals with some content from Frame docs but it's slow and

  • Accessing images from shared components

    I am having problem finding out images from shared components. After loading my images from my desktop to shared components folder, when i try to create an image item, and click the browse button, it pulls out my hard drive for selection. i don't kno

  • SVG display problem

    There is a big bug in this version. When I import my SVG in a block into a menu. The images do not appear in "active" mode on the final page. I set an example. Just play with it to understand the problem. It really hurts !! https://www.dropbox.com/s/

  • Process Chain Running Twice

    HI!! I ran by error twice the same PC, now in the maintenance log, I found 2 logs, in the first one the Start step is in green and the others steps are in gray, in the second log the start step is in yellow. In the Displaying messages in found this:

  • Hi... SAP HR expertise advice needed

    Hi, I have 1yr of work experience in SAP field. Basically on support / maintenence projects. in HR module Would like to knw if I could take up the SAP certification in HR. Plz do advice.