Ip vrf " feature does not supported " on 3650

Hi Guys,
need help and suggestion
I am trying to using VRF for my company on serveal 3650 switches, after I input " ip vrf vpn1" command, the system pop up as " the feature does not supported "
I am using a 3650 IP BASE switch with cat3k_caa-universalk9.SPA.03.03.03.SE.150-1.EZ3.bin.
please someone advise and help how to resolve it

Hi,
To use VRF you need IP Services license.
HTH

Similar Messages

Installed graphics card does not support the opengl features recommended

I've installed FCP6 on my PowerMac (PPC G4 DP 1.25GHz), and when I run it, I get a warning ("...installed graphics card does not support the opengl features recommended...") and the program ends. The graphics card is the ATI Radeon 9000 Pro (64MB)
I'm looking for a definitive answer regarding my hardware compatibility with FCS2 (specifically, FCP6). I'm NOT looking for an answer along the lines of: your system is too old to run this.
I've checked the minimum system requirements from the apple website (http://www.apple.com/finalcutstudio/specs/
and http://www.apple.com/finalcutstudio/download/):
* A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
* 1GB of RAM
* An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
* A display with 1024-by-768 resolution or higher
* Mac OS X v10.4.11 or later
* QuickTime 7.3 or later
* DVD drive for installation
I have all that stuff. What I'd like is to know which component of my system is FCP6 complaining about (vis-a-vis the error message above), alternatively, if someone has had success with a similar configuration, I'd like to know anything they think might help.
Thanks in advance for any helpful advice you may have.

The minimum would probably be an nVidia Fx5200 or an ATI 9600...
Patrick

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

Preview does not support PDF features

I have generated a number of PDF files in Adobe Acrobat that are questionnaires. The intent is to have the users fill out forms, click radio buttons and check boxes within the PDF and using buttons embedded on the questionnaire email them back to me. I have run into many problems with my questionnaires by Mac OSX users. It turns out when they open my Questionnaire (PDF) Preview launches instead of Adobe Reader. Evidentially Preview is the default application for PDFs. Preview does not support "calculations" "actions" for buttons including "submit a form" and does not auto font size in the forms they fill out.
Is there something in Preview that causes this issue that preview users need to do? It clearly appears Preview is not a good substitute for Abode Reader that is free and the standard for PDF viewing.

Bobbbo wrote:
The issue I have run into is that Adobe has generated a way that you can distribute forms to a large group of people, they can in return send back the data that they filled out. Acrobat can then tabulate the data automatically. It is a very powerful tool.
I don't doubt it. However, it is a purely Acrobat solution. I'm sure there is other software that can do the same thing. Have you considered a web site instead? You could build an HTML page to distribute to people and it would have all the same features. Plus, it would work with any web browser.
The problem I have is Apple has decided to make Preview their default PDF reader application. When a Mac users opens the PDF file things may not work and they do not understand why. They get frustrated and quit filling out the form, therefore locking out getting data from all Mac users. This is an unnecessary burden to put on Mac users!
Then why don't you pick a method that would work with a stock MacOS X machine?
Adobe Reader is free so why compete with a free application??
Adobe Reader is free for end users to download. If Apple included it as part of MacOS X, the would have to pay Adobe many millions of dollars. Furthermore, while Acrobat Reader does have many nice features, it is a slow, bloated behemoth that fewer and fewer people want to use anymore. That is why there are so many other PDF viewers these days - people don't like Acrobat Reader.
I just think they should not have a fully functional PDF reader as the default application for PDFs.
Preview is fully functional. But Apple can't read Adobe's mind and support every new feature that Adobe throws in to try to keep customers. Your PDF solution is an Adobe solution. Adobe software just isn't as ubiquitous as it used to be. Times change. I suggest you look into some other method of form distribution, such as HTML and Javascript.

Cat0-3750 upgrade. Error: system number 1 does not support the same feature

I am trying to upgrade or rather downgrade from ipadvservices (inadvertently upgraded to) to ipservices on a stack of Cat-3750s, but I get the following error message:
Ios Image File Size: 0x00877A00
Total Image File Size: 0x00B04200
Minimum Dram required: 0x08000000
Image Suffix: ipservicesk9-122-37.SE1
Image Directory: c3750-ipservicesk9-mz.122-37.SE1
Image Name: c3750-ipservicesk9-mz.122-37.SE1.bin
Image Feature: IP|LAYER_3|PLUS|SSH|3DES|MIN_DRAM_MEG=128
Error: The image in the archive which would be used to upgrade
Error: system number 1 does not support the same feature set.
Any ideas?
Chris

I was having the same issue even with entering the following:
archive download-sw /overwrite /allow-feature-upgrade tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
I noticed the image which was running on the switch was correct without the ".bin" at the end:
3560#sh ver | i image
System image file is "flash:c3560e-universalk9-mz.150-2.SE7"
I uploaded a fresh IOS image from CCO and made sure the image name had ".bin" at the end. Seems trivial except the error is produced through a sanity check. See below (please excuse the extra unplugging in the output):
3560#sh ver | i image
System image file is "flash:c3560e-universalk9-mz.150-2.SE7.bin"
3560#$de tftp://172.18.108.26/c3kx-sm10g-tar.150-2.SE7.tar
Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!
Mar 30 01:33:35.480: %USBFLASH-5-CHANGE: usbflash0 has been removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Mar 30 01:34:15.636: %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding!!!!!!!!!!!
[OK - 24893440 bytes]
Loading c3kx-sm10g-tar.150-2.SE7.tar from 172.18.108.26 (via Vlan1): !!!
Mar 30 01:34:35.593: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 2 removed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!                             !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
examining image...
extracting info (100 bytes)
extracting c3kx-sm10g-mz.150-2.SE7/info (499 bytes)
extracting info (100 bytes)
System Type:             0x00010002
Ios Image File Size:   0x017BDA00
Total Image File Size: 0x017BDA00
Minimum Dram required: 0x08000000
Image Suffix:          sm10g-150-2.SE7
Image Directory:       c3kx-sm10g-mz.150-2.SE7
Image Name:            c3kx-sm10g-mz.150-2.SE7.bin
Image Feature:         IP|LAYER_3|MIN_DRAM_MEG=128
FRU Module Version:    03.00.78
Updating FRU Module on switch 1...
Updating FRU FPGA image...
FPGA image update complete.
All software images installed.
Worked for me, hope this helps.

HT3275 disk does not support the required AFP features.

i'm using seagate wireless external disk for back-up. disk does not support the required AFP features.

It's not compatible with Lion. The software/firmware needs to be updated. See #C16 in Time Machine - Troubleshooting.

The new 5.0 does not support the fox tab feature that I love and I need a similar compatible add on -- which do you suggest?

I just uploaded firefox 5.0, which does not support the top sites feature I've used so happily. Is there a similar add on that does work with 5.0? I feel like I'm blind!

The author of the Fox Tab extension has released version 1.4.3 which does, in fact, work with Firefox 5. It hasn't been formally reviewed yet, which is why you don't see it in the extension gallery by default. To get to it, click below:
https://addons.mozilla.org/en-US/firefox/addon/foxtab/versions/

What does your account type does not support the view account feature mean?

What does your account type does not support the view account feature mean?

In reference to what? Where are you seeing this message - iTunes? Do you use a credit card for purchases in iTunes or do you download only free content?

Network backup disk does not support the required AFP features

I have a mac mini with two (4T) hard disks each set as target in TimeMachine. Backups have been made on both for some time. This afternoon one of the disks is being rejected as target volume, with the "network backup disk does not support the required AFP features" error.
The sparse image on the disk that is the actual time machine target shows a modification tim of 13:09, time machine reports the last backup on that volume as made on 13:08. It seems the last successful backup was made at that time. The other TimeMachine target volume on the same min reports a last backup at 15:28
So why an error now? What has happend in the last hour, or so, to cause the disk to no longer be suitable? Why only on one virtual disk?
The mac mini runs OS X 10.9.4 (13E28), the disk with the failing backup volume is formatted with Case-Sensitive Journaled HFS+, the still working disk Journaled HFS+.
This may be related: A couple of month ago I lost the complete backup on that disk, when time machine conclude that the contents of the target volume was corrupt. At the time I blamed that at a failed backup when I had accessed the mini over ssh using SLINK when traveling. Maybe that conclusion is wrong and this is part of the same problem.
Any pointers on how to get my second backup disk working again would be much appreciated.
Eduard de Jong

The error message has disappeared!
Earlier this morning the disk has been used as target for a backup by time machine without triggering the error message. A backup 8 hours earlier has also been made to the same sparse image (looking at the folder names).

The network backup disk does not support the required AFP features.

I am trying to set up timeMachine on my new mac book pro over a regular home network on a shared network drive. I have tried everything but I keep getting "The network backup disk does not support the required AFP features." I am on lion with the lateset unpdate (10.7.4). I have even tried creating sparebundles on from tutorial that I have found online, but non of the hacks that I have tried seemed to work. Have anyone figured out a way around this? If so, can you share, it will be greatful. I could just buy the time capsule that apple sells but I already have a 2TB internal HDD in an old pc that's hosting my file server so no need for the time capsule hardware. Let me know if there is a way around this thank.

ookakaa wrote:
1) Apple time capsule
Or USB drive connected to a Time Capsule
2) NAS with the latest firmware
Not just any NAS. It has to support the communications protocols used by Time Machine (some involving security, some about error detection and handling). Some NASs never supported TM; some that worked on Leopard never got updated for Snow Leopard; and some that worked on Snow Leopard still haven't been updated for Lion.
4) Another networked mac (not a pc)
A Mac running Leopard 10.5.6 or later.
Are these the only options?
Those are the only options supported by Apple. Some other destinations may work, to some degree, in some circumstances. Some require "hacks" or other workarounds. Most are somewhat unreliable, and, may stop working at all on the next OSX upgrade.
Side note. I've been seeing some online post of how some people are setting up TM on a networked PC drive by setting up a sparsebundle like this site:
Any thoughts? I have tried some of these examples and it don't seem to work...
Some of those may have worked at one time, in some circumstances (2 are dated before Lion was released, the other is undated).
Wireless backups are tricky enough to a supported destination, with all the security and error detection and handling Apple has been able to employ. If your backups are important to you, don't trust them to a marginal scheme.
And, in any event, don't trust your backups to a single piece of hardware or software. See Time Machine - Frequently Asked Question #27 for an explanation and some suggestions.

AFP error for new hard drive for time machine The network backup disk does not support the required AFP features.

Purchased Seagate network drive, ethernet attached to wireless router, set up went well but attempts at backup with Time Machine failed. "Do I need to erase disk and reformat or is this error message "The network backup disk does not support the required AFP features" indicating some other error?

That means the NAS drive's OS isn't compatible with the version of OSX you're running. See if the maker has an update.
See #C16 in Time Machine - Troubleshooting.

Can anyone tell me what this Time Machine error means? The network backup disk does not support the required AFP features?

Can anyone tell me what this Time Machine error means? The network backup disk does not support the required AFP features?

AFP - Apple Filing Protocol
The Network Attached Storage (NAS) that you are pointing Time Machine at does not have the features needed by Time Machine in order to do its Thing. Time Machine needs some specific features that are not typically available on generic networked storage devices.
There are manufactures that support the Mac OS X HFS+ file system formats and implement all the needed AFP protocol packets necessary so that they can be used with Time Machine, but apparently yours does not.
If you are not using a networked mounted volume for Time Machine, then more information will be needed about your Time Machine setup.

HT3275 Time Machine gave me this message after updating to Mountion Lion "The network backup disk does not support the required AFP features."

After upgrading to Mountain lion, I got this message when it tried to backup to "MybookLive" network disk.
"The network backup disk does not support the required AFP features."
What are AFP features and why can I now not back up to my network disk?

I had a similar issue when I tried to do a network-share backup w Time machine when the share was on a Leopard OSX G5 Power PC.
I think Time Machine looks for a minimum feature set support from the afp mounted drives so they can be used with Time Machine.
Western Digital may have to update the firmware on your device to support the new afp features.
Hope this helps.

Lock screen does not support the new panoramic feature in iOS7

Lock screen does not support the new panoramic feature in iOS7.
You are supposed to be able to take panoramic photos and then set them as your lock screen background.
Then you can move your phone around to see the full photo.
My i5 doesn't !!!!!!!!!!!!!!!!

I believe this was removed in the later betas of IOS 7. It may make a reappearance in a future update.
It was mentioned at WWDC when iOS 7 was announced, but there is no mention of it on the Apple website.

Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

Team , Thanks for looking into this ..
As a last resort on optimizing my stored procedure ( Below ) i wanted to create a Selective XML index ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
Index feature is not supported for the current database version.. How ever
EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
Is there ANY alternative way i can optimize below stored proc ?
Thanks in advance for your response(s) !
/****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- EXEC [dbo].[MN_Process_DDLSchema_Changes]
ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
AS
BEGIN
SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
select getdate() as getdate_0
DECLARE @XML XML , @Prev_Insertion_time DATETIME
-- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
-- PRINT '1'
CREATE TABLE #Temp
EventName VARCHAR(100),
Time_Stamp_EE DATETIME,
ObjectName VARCHAR(100),
ObjectType VARCHAR(100),
DbName VARCHAR(100),
ddl_Phase VARCHAR(50),
ClientAppName VARCHAR(2000),
ClientHostName VARCHAR(100),
server_instance_name VARCHAR(100),
ServerPrincipalName VARCHAR(100),
nt_username varchar(100),
SqlText NVARCHAR(MAX)
CREATE TABLE #XML_Hold
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
BufferXml XML
select getdate() as getdate_01
INSERT INTO #XML_Hold (BufferXml)
SELECT
CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
FROM sys.dm_xe_session_targets xet
INNER JOIN sys.dm_xe_sessions xes
ON xes.address = xet.event_session_address
WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
--RETURN
--SELECT * FROM #XML_Hold
select getdate() as getdate_1
-- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
FOR
PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
--RETURN
--CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
--SELECT GETDATE() AS GETDATE_2
-- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
--CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
--USING XML INDEX [IX_XML_Hold]
---- FOR VALUE
-- --FOR PROPERTY
-- FOR PATH
--SELECT GETDATE() AS GETDATE_3
--PRINT '2'
-- RETURN
SELECT GETDATE() GETDATE_3
INSERT INTO #Temp
EventName ,
Time_Stamp_EE ,
ObjectName ,
ObjectType,
DbName ,
ddl_Phase ,
ClientAppName ,
ClientHostName,
server_instance_name,
nt_username,
ServerPrincipalName ,
SqlText
SELECT
p.q.value('@name[1]','varchar(100)') AS eventname,
p.q.value('@timestamp[1]','datetime') AS timestampvalue,
p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
FROM #XML_Hold
CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
SELECT GETDATE() GETDATE_4
-- SELECT * FROM #TEMP
-- SELECT COUNT(*) FROM #TEMP
-- SELECT GETDATE()
-- RETURN
-- PRINT '3'
--RETURN
INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
[UserName]
,[DbName]
,[ObjectName]
,[client_app_name]
,[ClientHostName]
,[ServerName]
,[SQL_TEXT]
,[EE_Time_Stamp]
,[Event_Name]
SELECT
CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
ELSE T.nt_username
END
,T.DbName
,T.objectname
,T.clientappname
,t.ClientHostName
,T.server_instance_name
,T.sqltext
,T.Time_Stamp_EE
,T.eventname
FROM
#TEMP T
/** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
-- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
WHERE ddl_Phase ='Commit'
AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
AND MN.[DbName] = T.DbName
AND MN.[Event_Name] = T.EventName
AND MN.[ObjectName]= T.ObjectName
AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
-- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
--SELECT GETDATE()
--PRINT '4'
--RETURN
SELECT
top 100
[EE_Time_Stamp]
,[ServerName]
,[DbName]
,[Event_Name]
,[ObjectName]
,[UserName]
,[SQL_TEXT]
,[client_app_name]
,[Created_Date]
,[ClientHostName]
FROM
[dbo].[MN_DDLSchema_Changes_log]
ORDER BY [EE_Time_Stamp] desc
-- select getdate()
-- ** DELETE EVENTS after logging into Physical table
-- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
-- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
-- SELECT @XML
SELECT GETDATE() GETDATE_5
END
GO
Rajkumar Yelugu

@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
   May 14 2014 18:34:29
   Copyright (c) Microsoft Corporation
   Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu

Ip vrf " feature does not supported " on 3650

Similar Messages

Maybe you are looking for