Ip was going to dump
Hi All,
When iam double click the existing infopackage in dev it was going to dump.
Can some one help on this .
Thanks,
chella.
Hi ,
Plz try to run this program RSSM_OLTP_INIT_DELTA_UPDATE .it will set all the delta & init updates.
Regards,
Sai
Similar Messages
-
Depot Sales -J1IJ while choosing excise invoice going to dump
Hi Gurus,
In Depot Sales: while doing excise invoive from T-code J1iJ Go to delivery -RG23D selection select the delivery number XXXXX Excise Group 51 and series Group: 50 ENTER - select the line item and click on F6 and here we have to click on excise invoice Button for capturing the Input excise duties for taking the reference.
we are facing issue in J1IJ, when we click on the Choose button (first button below select Excise invoice for delivery statement), we need to get the Excise Invoice number reference which is captured at Plant. When we tried to click on that Choose button, we are not getting any excise invoice numbers and instead itu2019s going to dump .
Dump analysis says:
Runtime Errors SYNTAX_ERROR
Date and Time 14.09.2009 16:43:01
Short text
Syntax error in program "SAPMJ1IK ".
What happened?
Error in the ABAP Application Program
The current ABAP program "????????????????????????????????????????" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPMJ1IK " in include "MJ1IKF01
" in
line 38:
"Field "IT_FILTLIST[]" is unknown. It is neither in one of the specifie"
"d tables nor defined by a "DATA" statement. ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "????????????????????????????????????????" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program SAPMJ1IK :
"Field "IT_FILTLIST[]" is unknown. It is neither in one of the specifie"
"d tables nor defined by a "DATA" statement. ."
Trigger Location of Runtime Error
Program ????????????????????????????????????????
Could any body help me out to come out of this issue.
Thanks&Regards
SreekanthHi Sreekanth,
If this is first time you are doing look for OSS notes, Please escalate this issue to your basic and apap consultants.
R u following the following flow in case of stock transfer from mfg plant to depot plant.
PlantA:
ME21N
VL10B
VL02N
VF01
J1IIN
Plant B:
MIGO - (Goods Reciept & Excise Capture)
VA01
VL01N
J1IJ
VF01
Here at goods reciept you need to capture excise inviove same will populate when you make a sales from plant B using J1IJ transaction.
Thanks,
Swamy H P -
Function module going for DUMP
Hi ALL,
I have import request and i got sucess .My 3 function modules are import to client system.2 FM are working properly but 1 function module is going for DUMP.
When iam Executing this FM through SE37 F8 its running but iam not able to display or change this ZFM.
In our DEV sytem it is working properly.but Client system it is going for DUMP.
I have gone dump analysis its saying
An exception occurred. This exception is dealt with in more detail below
. *The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR',
was neither caught nor passed along using a RAISING clause, in the procedure
MO_IMPORT_MODIFICATIONS" "(METHOD
Length error occurred during the IMPORT statement
*The system found when importing that the target object was longer or
shorter than the object to be imported*
Thanks in Advance,
Madhu.
Edited by: madhubabu rao on Apr 23, 2009 10:34 AM
Edited by: madhubabu rao on Apr 23, 2009 10:36 AMHi sekhar,
I did not transport individually.I have transport 3 FM in a function group and it is assigned to a Package.
First i have 2 FM in my function group after that i have copied one more FM from another Function group.
in SE80 right click -->copy it asked me function group name only .not transport number.
After copy the FM i have transport total package.2 FM are working properly .The FM which i have copied it is not able to display or edit.
Madhu -
Hi All,
I have import request and i got sucess .My 3 function modules are import to client system.2 FM are working properly but 1 function module is going for DUMP.
I have gone dump analysis its saying
"Length error occurred during the IMPORT statement."
"The system found when importing that the target object was longer or
shorter than the object to be imported."
where did i mistake while import ? or while transport?
That FM is working properly in our DEV.
Thanks in Advance,
Madhu.Hi Madhu,
Suggested to post this in logistics forum for better answer.
Software Logistics
Regards,
Debasis. -
Call for adobe form is going for dump for multiple users
hi,
i am calling an adobe form in a program i.e. for multiple users. now my problem is.....
3 people are using same tcode to generate the adobe form output for different data. but when they click at a time on the button to generate the adobe output, then adobe form is coming for only one user and it is going for dump for other users.
and this dump is coming because of exception "CX_FP_API_INTERNAL" in funtion module FP_FUNCTION_MODULE_NAME which i am using to get the function module name of the adobe form in my program.
can u please give me some solution to rectify this issue....That's nothing!
An engineer and I contacted Adobe technical support by phone to ensure the PC I was having custom built was configured to its optimum. They advised XP64 as the best operating environment. After that discussion we had to completely revise procurement, etc to get the bits and compatible XP64 compatible software, putting the build project back a few weeks as well, Imagine how I laughed when I found out on one of these forums that XP64 is the worst choice and totally unsupported by CS4!
I have written to Shantanu Narayen, Adobe CEO and didn't even get an acknowledgement I raised this last week on the Adobe stand at BVE and was told they'd get someone to contact me asap but guess what, niet...! To be fair there has been one Adobe executive that recognises the problem and the damage poor customer support is causing the company; he has been as helpful as he can. Unfortunately, it seems the overall Adobe culture at the top is "get the money and run". If your problem goes beyond what's already on their web pages, tough luck!
Regards,
Graham -
When I pre ordered my iphone 6 i was told I was going to get an additional 1 gig of data per month for a year. It even shows it on the receipt i received with the phone. When will I see that reflected on my account. I have had my new phone for a week and used tons more data than usual and am hoping that will save me this month.
concretedonkey, I'm glad you were able to take advantage of this offer when you ordered your new iPhone 6. I can certainly review your account to ensure this was added for you. Please reply to the direct message I have sent you.
AndreaS_VZW
Follow us on Twitter @VZWSupport -
How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can't find in any of the tutorials.
The steps would be :
- Add files from file menu > select pdf > add to site
- Select the content (rectangle,text etc) and click on hyperlink dropdown > it should show you the added files list
- Select the file you want to link
Thanks,
Sanjit -
i have a friend who was going to sync her phone with my computer to get the new update.. how do i add her phone with out her losing everything on her phone and not getting all my info on her phone..
First, create a separate login on your computer for your friend. Do this BEFORE you do anything else. Next, make sure iTunes is up to date. Then:
1. Disable auto sync when an iPod/iPhone is connected under Preferences>Devices in iTunes.
2. Make sure you have one contact & one event in the supported applications(Address Book, iCal) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect her phone, iTunes running, do not sync at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on her phone will be in her itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore her itunes content, which you select from the various tabs, You'll get a popup regarding her contacts & calendars asking to merge or replace, select merge.
You should be good to go. -
I changed my Apple ID but on my iPhone 4S w/ iOS 7.0.4, when I go into settings > iCloud it still shows the old Apple ID. How do I change this? I was going to delete the iCloud account from my phone then add it back with the new Apple ID, but I'm not sure...help!
http://support.apple.com/kb/TS5223?viewlocale=en_US
Peace, Clyde -
Had to change Apple ID/Password recently now cannot access iCloud. In settings when tapping iC, log in screen appears with old ID and request for (old) password.
In Settings Mail, Contacts etc iCloud does not appear. I was going to delete account.
Trying new ID/Password message appears "maximum no. of free accounts have been activated".
Using old ID/Password message apperas "you can,t sign in because account was disabled for security reasons ......reset password at iforgot.apple.com which i did.
Can anybody help please??Hi,
I tried to log in to iCloud but a message appears telling me I "can't sign in because my account was disabled for security reasons....reset password at iforgot.apple.com". I don't know why this happened.
I reset both my Apple ID and password.
When I tap Settings iCloud is listed on the left side between General and Mail, Contacts etc.
Tapping iCloud brings up a log in screen for iCloud which shows my old Apple ID and requests the password. If I put the password in I get the message as above.
If I use the new Apple ID/Password I get the message "the maximum number of free accounts have been activated....
In settings there is no option to "Delete Account"
Any suggestions?? -
I attempted to update my iPhone 4 from ioS 5 to ioS 6 from iTunes on my laptop using Windows 7 OS, I had downloaded the new ioS 6 and started the update on the iPhone 4 and everything seemed to be going routine until the phone had been going thought what I though was the update process, when an error window opened up and it said that an error had occured and the iPhone 4 could not be updated. I have never had a problem like this before and it caught me off guard and I did not note all the information in the error window, but it did not appear to indicate anything other than that I would have to abort the update and did not think it would be that big of a problem. I tried to disconnect the phone and was going to do the update at a different time when I could investigate what the problem was. However I could not get iTunes to recognize the iPhone 4 after this and still cannot. After rebooting the laptop a few times and also trying to reset the phone a few times as well, I just have a dead phone. The iPhone 4 just has the image of a USB cable with an arrow pointing to an icon for iTunes. I have tried to get iTunes to recognize the iPhone, but cannot get it to. I am unable to do anything else with the phone. It seems like the phone is in a state where it does not have enough software loaded to do anything or I don’t know how to get it to. Any suggestions how I can get my iPhone 4 back into service. Note: iTunes still recognizes my iPad and iPods, so iTunes seems to be okay to me. Craig
I had this problem on my iPod Touch 4g. Just press the home and sleep button. Wait and it will give an iTunes and cable logo. Now you can put in DFU mode (Hold Sleep and Home button 10 seconds and then release the power button kand keep pressing on the home button.) Now you will be able to restore it in iTunes.
If you didn't sell it in al this time -
I was backing up my MacBook with Time Machine and using my new (correctly formatted) external hard drive. All was going well when my 2 yo knocked the disk leading to a "failure" by time machine (Latest Backup: Failed). Now the MacBook will not even recognize the hard drive. I have rebooted, tried all I can think of, but no acknowledgement of the drive. The drive itself makes noise and vibrates as if working, but nothing from the Mac. Please help or $100 down the drain... Thank you.
You may have already done these resets in the "tried all I can think of " portion of your post.....if not then here they are.....
PRAM
support.apple.com/kb/HT1379
SMC
support.apple.com/kb/HT3964
.....hopefully that is all that is required..... -
i was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?
I can't say personally since I never used AW, but see if these articles help:
http://www.macworld.com/article/1166370/open_old_docs.html
http://www.cultofmac.com/248546/convert-system-os-9-appleworks-6-files-to-os-x-p ages-files-os-x-tips/
I suggest that you clone your current drive with 10.6.8 to an external drive. If you have any issues after upgrading to Mavericks, you can boot back into 10.6.8.
Both of these applications can be used to create a clone. If you need help creating your clone, let us know.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html -
I recently rented a movie using Apple TV and it said it was going to take 7-14 hours to download so I let it run. I also received a message from apple telling me that there was a request for this movie and they took the funds. But when I tried to find it on my purchases it was not there and when I went back to that movie it was asking me to purchase it again is this common and how do I get it back.
Not sure what happend there. But ATV only streams, no HD so if you leave it too long, the whole download gets lost.
Check with iTS.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
I was going to install Rosetta Stone Spanish onto my Macbook 10.6.7 but am concerned about it taking up space on my 2GB hard-drive. I have an external WD hard-drive, and I was wondering if it is possible to put the application onto the external hard-drive to save space on my Mac?
I think you're confused about how much hard drive space you have. You probably have 2 GB of RAM... there hasn't been a Mac shipped with only a 2 GB hard drive in a while. At the bottom of any Finder window, how much space is available?
If you're actually running low on space, you should move documents to the external drive, since many applications want to be on the system drive.
Maybe you are looking for
-
I signed up for an "Apple ID" and an "Apple Support Communities username" separately using the same e-mail address. Is there any way to merge the two accounts? I signed up for "Apple Support Communities" several years ago to get help with Apple prod
-
Filling the entire screen in Photoshop Elements 10
I don't know how to fill my screen with the image as I can in regular Photoshop.There's all these editing tools taking up much of the screen.Any help would be appreciated.
-
Web Galleries from before MobileMe missing from iPhoto
All of my web galleries from before the MobileMe upgrade are missing from the iPhoto left panel. They all show up online at gallery.mac.com and gallery.me.com and in iPhoto under Preferences>Web Gallery>"Albums you published as. The one gallery creat
-
For the past few days I'm getting emails on my Iphone 3GS, with "No Sender" "No Subject" "No message" on them, like 50 at a time, and I can't delete them. When I go into "Edit" there's no little circle to click on. This doesn't appear on my Imac or
-
Audio playback issues; Macbook Pro OS X 10.6.8 Intel Core Duo 2007/2008 model
Hiya, I cannot fully remember when this issue started but recently it has made listening to music, watching videos impossible. Whenever i play audio via iTunes, QuickTime, YouTube, Streaming via Chrome/Safari after about 5-10 seconds the sound w