IP2700 Cuts off right edge

I have been using this printer with my desktop with no problem, but now with my new laptop, the 'scale to fit media' function always leaves me with my imagery cut off on the right hand side. I am printing from photoshop with an 8.5x11 inch canvas, and am printing on an 8.5x11 inch sheet, i have scaled to fit media checked, and the bounding box shows that the entire image is fit in with nothing cut off, yet when i print it always cuts off a couple millimeters off the right side. Is there a setting I'm missing, I've done a side by side comparison with my desktop and the laptop's printing screens and they look the same.

I am having the same issue with my iX6520. Margins are set to zero, borderless printing is on, it's scaled to fit, and it still is cutting off. It does this when I try to print from photoshop, and also when I tried to print from Preview. Attached is an image of the problem... I am also on a relatively new laptop (a mac).

Similar Messages

How to make pdf of IE page without cutting off right edge or getting illegible font?

If I create a PDF from the Acrobat Pro X toolbar, it cuts off lines, instead of wrapping them as they are displayed and printed. Actually, it looks like they are folded back upon themsleves at the right side, as if there is no "new line" along with the "C/R". If I print to PDF, I get illegible weird characters, almost as if it were a windings font. I already did a repair reinstall, which is when the weird font started. The cutting off started before then.
All PDFs I make from Office documents are still normal. A PDF made either way from FireFox is still normal. If I print from I.E. to paper it looks normal. Must be some weird interaction with I.E. 8.0.60001.18702. Using XP.
Cannot find a similar topic that discusses this. Using Acrobat Pro X; no updates are available so I must be current at 10.1.4 This is on a corporate PC, so I am limited as to what system changes I can make by policy. It's also a major deal to reinstall from disk, as the techs have the CDs and keys and must do it. On the other hand, they are clueless about the problem. Have not heard complaints about this from anyone else.
Can anyone help?

Still have not heard from anyone. I think there is something wrong with the forum pages at Adobe; this is the site where I have the problem. If I use the PRINT ICON on the site or use F8 and print to Adobe printer, I get garbage. If I use PRINT PREVIEW at the right, on the site, it is OK and it prints to Adobe OK. If I use VIEW AS PDF on the site at the right, it is OK. If I use the CONVERT ICON in I.E. 8, it cuts off everything on the right, from the REPLIES SECTION on down.
So the work-around is to either use the VIEW AS PDF command at the right or the PRINT PREVIEW command at the right. It still worries me that the CONVERT icon in I.E. 8 and any PRINT to Adobe printer command will mess it up.
There are some places at adobe.com where things still work correctly.
Thanks,
Jeff

Print out cut off right hand side

Hi All,
We configured network printer in production system,print out cut off right hand side
user giving print out e-recruiting web based system.i had made all changes in SPAD.
It seems to apply some SAP note Can anyone suggest me please.
Thanks in advance
Jalandar Reddy

Hi,
One note, addressing same problem as you have: 1226913.
<removed_by_moderator>
Do not ask for points.*
Read the "Rules of Engagament"
Thanks & Regards,
Sujit.
Edited by: Juan Reyes on Oct 1, 2009 10:55 AM

Exporting to PDF cutting off right side of the page.

I am exporting a Crystal Report to PDF. This works perfect on our development and staging server. However, on the production server the PDF is cut off on the right. Like, instead of being 8.5" wide, it looks to be about 7.5" wide? It just cut off the right side of the PDF. Very weird. Republished the site but did not change anything.
But here's the odd part. We have another Crystal Report on the production server that exports to PDF just fine. Just this one report, "invoice2.rpt", is having issues. "invoice2.rpt" was originally copied from "invoice.rpt" so all of the settings (that I have looked at) are exactly the same. This report was formatted a little differently than the original.
Does anyone have any thoughts about what might be causing this to happen?
Thanks,
Randy

Hi Randy,
I have seen a similar issue in the past and the problem was due to the fact that some fields and or objects were placed in part or completely outside of the margins of the report. This can be checked opening the report from Crystal Reports > Design view.
I would suggest opening the report from Crystal Reports, select the option 'No printer' from File menu>Page setup and double-check that the report has been created inside the report margins (From Design View, the report space should be white except if the background colour has been modified).
If this does not help, please clarify if the issue is faced from Crystal Reports or from Business Objects Enterprise/Crystal Reports Server and the version you are using.
Thank you,
Selenia

Converting DWF to PDF using right click option cuts off right side.

I have 24x36 dwf files that I need to convert to PDF. (Printing Landscape)
When using the right click option in explorer, "Convert to Adobe PDF", the conversion cuts off about 6" on the right side of the page.
(I can "Print" inside my DWF viewer to Adobe and it works fine and I can set my default printer to Adobe PDF and select multiple at a time and it prints fine)
I currently have Windows 7 and Acrobat XI version 11.0.06.
How do I fix this?

You might check the preferences in Acrobat and see if there are settings for DWF files.

Pie chart drop shadows not printing properly.. cuts off right hand side of pie chart...???

Every time I go to print a pie chart that has a drop shadow applied to it, it cuts off the right hand side of the chart along with the shadow itself. It looks HORRIBLE!!! I went through and created a bunch of reports using that method, and now ALL of them have this problem. It makes ZERO sense to me, and it appears that nobody else is experiencing this. Does anybody have any ideas?

It may be a good idea to read :
http://support.apple.com/kb/TA23140
Yvan KOENIG (VALLAURIS, France) mardi 19 juillet 2011 19:10:01
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

HP Envy 4500 cuts off right side of page

When I print a Word 2010 document, the right side of the page is cut off.

Hello Yonniehere,
Welcome to the HP Forums.
I see that you are having an issue with the printer cutting off the right side of the page.
Does this only happen when printing in Word or does it happen with other programs?
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

The title I'm trying to create using text tool is cutting off right side

I've looked at all the settings and can find no reason for this.
While I'm still a bit of a novice, I have done titles before and never had this problem.
An additional green box shows up in my canvas, showing me exactly where this it cutting off. I don't know what this is. Is there a way to readjust this?
Under the Motion tab in my Viewer, the Center is set to -55 and -100, because this is where I want the text positioned. It is also aligned left under the Control tab. I can see where, if I were to align center, it would all fit, but then the text isn't appearing where I want it to.
Can anyone help?
Thanks a lot.
J.

Well, now I'm feeling even more stupid.
I cannot find the generator button you describe, even after consulting the help manual.
I THINK I know which one it is - the button in the lower right corner of the viewer - the same one that has Text, Crawl, etc....?
But it's not there.
I'm using FCP HD. is that the problem?
Also, Boris is familiar to me - I think I've used it or seen it in the past - but I can't find it. I'm wondering if I'd seen it previously while using Final Cut Express, but somehow, since upgrading to Pro, I don't see it any more.
If you can clarify any of this, i would be vrey grateful.

4500 envy cuts off right hand side of pdf document when I print to letter size paper

This is a new printer for me. It is connected to my laptop with a USB cord. I am attempting to print an e-mailed PDF document . When I preview, I see that the right-hand side of the document is cut off by more than an inch. How do I get the printer to format the document to fit on letter-sized paper? Reducing the document size to under 100 % does not help.

Thank you for your response! Try the steps below in order, and try printing your email again. Let me know what happens! Reset the printing systemRepair disk permissionsRestart the MacClick here to download and install the printers Full Driver: HP ENVY 4500 e-All-in-One PrinterTry printing your email and also from Text Edit. Good luck!

Image cut off at edge

I have inserted a logo with a registered trademark symbol in
the upper right corner and the right side of the circle on the
circle R symbol is cut off. The logo was created in Illustrator CS
and exported as a PNG file.

Please re-read my first reply. I said, "Link please". The
code you posted is
of no help because, guess what?, until we can see the image
in question we
can't tell what is going wrong.
Walt
"oldbologna" <[email protected]> wrote in
message
news:[email protected]...
> Thanks Walt.And ... the question is: how do I make the
rest of the circle
> R
> appear on the page? The whole page is now attached.
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <title>Home Page</title>
> <meta name="description" content="Official home for
Misticks Home
> Fragrance
> Products, Reed Diffusers, Incense, Sachet Sticks, Soap,
Fragrance Mist,
> Room
> Perfume, Incense Cones, Incense Burners, Cone Incense
Burners," />
> <meta name="keywords" content="Misticks incense
sticks, reed diffusers,
> sachet
> sticks, room perfume, lamphuggers, soap, fragrance mist,
sachet scent,
> jazzberries, indian summer, delicious vanilla, vorange,
lavender rosemary,
> sandalwood, nag champa, ginger sutra, ecoscenter,
incense burners, " />
> <link href="misticks.css" rel="stylesheet"
type="text/css" />
> <style type="text/css">
> 
> </style>
> </head>
>
> <body>
> <div class="logo" id="logo">
> <div align="center"><img src="logo Misticks RGB
10.png" alt="logo"
> name="logoMisticks" width="360" height="69" vspace="30"
align="middle"
> id="logoMisticks" longdesc="logo Misticks RGB.ai"
/></div>
> </div>
> <div class="productsNav" id="prodNav">
> <p>Fragrance Mist<br />
> Incense Sticks
> <br />
> Reed Diffusers<br />
> Room Perfume
> <br />
> Sachet Sticks<br />
> Sachet Scent <br />
> Soap<br />
> <br />
> </p>
> </div>
> <div class="horizNav" id="Layer6">wholesale buyers
</div>
> <div class="horizNav" id="Layer7">about us
</div>
> <div class="horizNav" id="Layer8">contact us
</div>
> <div class="horizNav" id="Layer9">find a store
near you </div>
> <div id="Layer10"><img
src="photo-RA-collection.gif" alt="rainforest
> collection" width="400" height="400" /></div>
> <span class="productsNav"><br />
> </span>
> </body>
> </html>
>

Printing window from Grab-always cuts off right side

I am wondering why Grab (Capture Window) captures the window perfectly, only to have it distorted when I go to print that window. Every time I use Grab for a window that I want to print, no matter what I do, the right side of the window (text/graphics) is cut off in the printing process.
Doesn't matter if I change Page Layout to Horizontal, the right side is never there in Print Preview. What is Grab intended for, if not to capture the whole window so someone can print it out? I don't get it.
I normally use the command, shift, 4, drag sequence which always works perfectly. So my question, is why is Grab there in my applications, if it doesn't do what I need it to do? I'm sure it has some good use that I am unaware of.
Can anyone tell me if I am doing something wrong with Grab? Thanks.

Hi, Jane. I have no idea why, but the same thing happens for me. A clumsy but effective workaround is to use the Save As... command in Grab, then open the resulting TIFF file in Preview, and print it from Preview instead of printing it from Grab.
Command-Shift-Option-4 has always worked so well for me that I think this is the first time I've ever opened Grab, and it may well be the last.

RH 7 print from toolbar cutting off right margin in IE

Topics printed with the Print button in the toolbar are cutting off the right margin in IE 7 & 8. It seems independent of the printer. This doesn't occur in Firefox.
Anyone encounter this before? Any documented fixes, or is it a known issue?

Hi there
I'm hopeful Willam will have an easy CSS fix for folks that insist on printing that which is intended to be presented on the screen.
Probably involves some @Print incantation or some such... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

Safari cutting off right side of web pages.

I have been using Safari on iPad to view web pages from my company's schedule bidding system. I have had no problems viewing these pages in the past, however now the right side of the web page is being cut off, I am unable to view information or use control buttons that are on the right side of the web page. I have several colleagues using safari on the iPad that are not having the problem so thinking it is a setting on my iPad and not the company website.
Any Ideas?

The Canon A630 ... (mainly because of the outstanding picture quality which you were able to show me, the variety of zoom levels, not to mention it's nearly half the cost). Although the other camera is a higher MP rating; that in itself didn't sell me on a newer model).

PDF cutting off right side

When I save an MS Word document to PDF - the right side of the page is cut off... How can I stop that from happening?

You'll probably want to ask in an MS forum. It's their product being used to create the PDF.

Hp printer cuts off right side of paper

Hello,
I am new to this but I have a problem that needs to be answered pretty quickly please, when I try to print out an email the right side of the email gets cut off, I checked the printer setting and even the preferences but everything is alright, nothing wrong there, but every time I print I happens. Also when I go to print out a picture the picture turns out yellow, please I tried everything I could think of.
This question was solved.
View Solution.

Hi - Can you provide the model of printer you're using? That will help determine what steps to take to troubleshoot. Typically though, when the print out is being clipped or cut off, it has to do with a paper size mismatch between the printer driver software and the settings in the software you're using (i.e. MS Word). Make sure that the paper size settings in the sw (typically under page setup) match those of the printer (typically under printer setup).
As for the color issue, the first step will be to run a self test page on the printer to determine whether it is an issue with the ink cartridges. How to run the test page from the printer is dependant on the printer model.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

IP2700 Cuts off right edge

Similar Messages

Maybe you are looking for