Ipad 1 and iTouch connection issues

Hello
I have just brought my first Mac (iMac) and I am slowly getting used to it, everything positive so far...except! I have an old iPad 1 that my son uses for his speech therapy and an old itouch (orginal itouch), when I try to connectthem to the new iMac they cannot connect, the screen on both just flashes, trying to connect and charge but without success. They connected perfectly on my Windows PC before I tried to move to the Mac.
Any ideas anyone please!
Thanks
G

No it's not jailbroken. I will never do that to any of my devices. I am talking about memory. I have plenty of storage. Just tired of apps crashing back to the home screen.

Similar Messages

I can not join the my home WIFI network. I have iPhone and iTouch connected as well as my windows laptop. I have trie power on rese, and network reset

I can not join the my home WIFI network. I have iPhone and iTouch connected as well as my windows laptop. I have trie power on rese, and network reset. What do I do next?

This is something else you can try.
Go to Settings>WiFi>Your Network Name (tap the blue arrow)>Forget this Network. Reboot your iPad, hold down on the sleep button at the top for a couple of seconds until the red slider appears, slide to shut down. Then press the sleep button again until the Apple logo appears and let go of the button and the iPad will restart. Try to join your network again.

I just get the new iPad air and when connecting it to my laptop, why the battery is not charging?

just get the new iPad air and when connecting it to my laptop, why the battery is not charging?

A lot of computers don't provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.

IPad and Itouch videos - issues

Question 1: I bought videos using my pc and downloaded to my itouch. Now when I click on some of the videos, I get the display "cannot connect to wi-fi". But I do have internet and am connected. I don't know why it is saying this. Some of them I can play. Also, how do I know i have the video on the itouch and not just in the cloud?
Question 2: I then purchased an Ipad. I tunes music transferred to Ipad but the videos are not transferred. How do you transfer videos to an Ipad?
Thank you.

Here's the master page for all of Verizon's apps. Right now only the Media Manager app is available for iPad.
In order to view your personal media, it must first be uploaded to your FlexView Library. This can be done using the Media Manager application on your PC or Mac.
The Media Manager iPad app also allows you to stream Flex View movies and TV shows you have purchased from Verizon, whether you bought it on your set-top-box, PC or phone. In other words, it also serves as the FiOS On Demand app.

IPad 2 is having connectivity issues since I updated to 8.0.2

My IPad 2 had connectivity for about 6 hours after I downloaded 8.0.2 last Saturday. Sunday morning I was back to NO SERVICE in the upper left hand corner. Yesterday I went to the Apple Store and they showed me how to reset the cellular data, and again I had my 3G back for 6 hours. Last night and again today we were back to NO SERVICE. Again I went to the Apple Store and they explained that there were a few phone models that were having cellular connectivity issues, but not IPads. Well, that's bunk, since I see the complaints that are exactly like mine all over the web. The Apple Store wiped my IPad clean and told me that if this is a software issue this should fix the problem. If this is a hardware issue then I will need to buy a new IPad.
Apple needs to own up to the problems that it caused with our devices. AT LEAST, we should be able to take the updates off of our IPads and go back to 7.0.
<Edited by Host>

If you can’t use a Bluetooth accessory or car kit

IPads/iPhone and Open Wifi Issue

Running Cisco wireless at a larger university and We're running into issues with ipads and iphones on our network. We run an Open guest network. No encryption. But are having difficulty getting ipads and iphones, of variying models, getting connected reliably. We get "error joining network" messages, but only for the Open networks. Also, it seems Random. 3 out of 4 times it fails and then it will connect a few times and then fail again. It makes no sense whatsoever.
Here is out network setup:
Wireless network enryption: None (Open)
WLC is a 5508 Running version 7.0.222.0
We also have 2-4400 models running 7.0.222.0
APs are 1131's (ABG) and 1142's (AGN)
We have run several tests to confirm that this seems isolated to our Cisco envirnoment and only Open networks. We have another vendors products on site (That we've been slowly replacing with Cisco) and have the same network configured there and are not having these issues. We have also tried putting a WPA2-PSK password on the network for testing purposes, and that elminates the issues, however, we need this network to be Open due to requirements on our end.
We've tested everything from iPad 1's up to iPad 3's all running the latest iOS 5.1.1 as well as iPhone4 and iPhone4S version running 5.1.1. All seem to have the issue.
I'm running out of ideas for testing and troubleshooting this issue. Any help or direction would be greatly apprecated.
Thank You.

I better explain this better:)
The session timeout will force a user to have to log back on the webauth. Idle timeout will allow the wlc to know of the iDevice even if it goes to sleep, or else it will timeout after 300 seconds which is default. Fast SSID change might not be needed unless you want the ability or devices to be able to switch to a different SSID or else the will have to wait for around 30 seconds.
Sent from Cisco Technical Support iPhone App

Ipad mini and bluethoot connection with pc

I have a ipad mini Model MD531C/A on version 6.1.3. It is named Caroline.
I want to connect the ipad Caroline on the internet using bluethoot with my PC (on windows 8). My PC is named Creator.
The PC detected the ipad named Caroline. The ipad dected the PC Creator.
The PC sent a code to the ipad. I clicked yes on the PC, they were matching.
Then I asked the ipad to connect to the PC Creator and it the ipad said (I do not remember exactly, but something like...) IT CAN NOT CONECT to that device.
The PC Creator disapeared from the list of bluethoot devices detectable by the ipad.
And I do not know how to go any farther with the ipad mini to detect the PC Creator again.
And I am afraid that if I delete the ipad Caroline from the list in my PC, that it is not going to detect my ipad again since the ipad seems to have blocked or erase the PC Creator from the list of detectable bluethoot devices.
Note:
I had not itune installed on my PC. But, as I am writting this, I am installing it.

Since you have a warranty, take it back.
 Cheers, Tom

Database link and remote connection issues..

We have a sql script... Large script that we would rather not post here. The script connects through a dblink to a remote site at the beginning and gets thousands of records. We then process these records locally which takes around 40 minutes. The link is unused for that time. Then the same script attempts to connect again through the dblink and set a confiirmation flag. But this final confirmation step routinely fails. The script used to work fine when the confirmation was at the beginning of the script.
My understanding is that when you go out through a dblink it creates a session on the remote computer. The session stays active until the local proc ends or the session times out. Successive calls through the dblink from the same proc will reuse the same remote session? Is this true?
So, Is the inactivity period possibly causing this dblink connectivity issue? We put some test sql select statements in the script here and there selecting from dual at the remote site to test the link inbetween major proc calls. Sometimes even these fail. What do I have to do to keep this link active? Is this even my issue?
Like I said this script worked fine when the confirmation piece was at the beginning right before we start downloading files and basically no inactivity period... Now we download files and confirm at the end with a 40min to 2 hour inactivity between.
The remote site as well as the network claim that they are not dropping us... The only piece of information I can provide is that on our side SQLNET.EXPIRE_TIME = 10 and on there side SQLNET.EXPIRE_TIME = 0. I've read that others solved this issue by manipulating this value.
Here are some of the errror message we get in our script...
ORA-03114: not connected to ORACLE
ERROR at line 1:
ORA-02068: following severe error from DMVAIS
ORA-03135: connection lost contact
Edited by: Mark Reichman on Nov 25, 2008 12:47 PM
Edited by: Mark Reichman on Nov 25, 2008 12:57 PM

What version of Oracle?
What are the values of the following database parameters?
open_links max # open links per session
open_links_per_instance # open links per instanceAny chance you are exhausting one or both these parameter values?
Have you ran a check on the network connection between the two machines?
HTH -- Mark D Powell --

Download and iTunes connection issues

As of recently, I have purchased numerous audio and video files from the iTunes store with no difficulty or connection issues of any kind. Though today, I attempted to download the Iron Maiden: Flight 666 movie, and had issues with my download. Though the file is downloading, it is taking an excruciatingly long amount of time. A 3.09 Gigabyte file, a file which might have previously taken me about an hour to download on my connection, now displays an estimated download time of 17+ hours. It has been downloading now for at least an hour, and only 9.5 Megabytes have been successfully downloaded. Now, I am experiencing difficulty accessing the iTunes store at all. An error message continually pops up saying that my connection has been lost and the download pauses, though I have checked my connection time and time again. I have even contacted my internet provider, Comcast, in hopes of solving my problem. My connection is good, though iTunes itself is the only thing giving me difficulty. I have gone through all of the steps that Apple has recommended, and have not had any success in attempting to download the file. Any help would be greatly appreciated.

Contact iTunes support.

BT Infinity and https connection issues

I have sporadic issues with https connections on my BT Infinity service.
I used to be on Virgin ADSL and had no issues.
I can also use a Orange mobile dongle with no issues if I switch to that when experiencing problems with BT.
Some example sites:
Dixons checkout pages
NatWest banking pages
Anyone else experience this?
Should I periodically reboot the HomeHub and VDSL?
Cheers,
Jason.

Can someone on Infinity kindly do me a test and visit https://upgrades.o2.co.uk/index.htm and tell me if it's darn slow for you too? It's not the site as I'm loading up VNC and connecting to a VPS in America and it's instantly loading. It'll definitely rule out traffic shaping if someone on Infinity can tell me either way.
Thanks you generous souls!!!

ATV2, iMac, Windows 7 Laptop, Iphone and iTouch Connectivity

Hi all,
I am frustrated as ****. Here's the deal.
I am running an Airport Extreme basestation (AEB) home wireless network with full connectivity from all devices to the outside world. I have my main iTunes (10.1.2) library on my iMac (OSx 10.6.6) and my son has an iTunes (10.1.2) library on his Windows 7 laptop. I have home sharing enabled on the iMac, ATV2 and Win7 Laptop all using the same Apple_ID.
My iPhone 4 and Itouch Remote Apps (home sharing also turned on) will both connect to the ATV2 and to the Win7 iTunes library. However, while both see the library on the iMac they will not connect to it. I can also stream from the iPhone and iTouch over Airtunes to the AVT2.
My ATV2 will see both the iMac Library and the Win7 library but will only physically connect to the Win 7 library.
My Win 7 library can see the iMac library but won't connect to it, similar to the iPhone, iTouch and ATV2.
My iMac library can't see the Win7 library at all. However I can connect my iMac to the windows laptop for simple file transfer between the iMac and the windows laptop and I can also play music from the iMac library over Airtunes to the ATV2.
With all this connectivity going on I am at a loss as to why iPhone, ATV2, iTouch and Win 7 Laptop can all see the iMac library but won't make the connection to it when each one of those devices all work together perfectly fine and all devices are on the same AEB wireless network.
This must be something very small on the iMac/Itunes side?
Help Please......

Hi,
No, Windows 7 Started edition only support USB connection. any network connection with your HP device is not supported due to limitations of the operating system:
For Windows XP Starter Edition, Windows Vista Starter Edition and Windows 7 Starter Edition
• Is supported for USB only
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108842-3&cc=us&dlc=en&lc=en...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

WAP2000 and iPhone connectivity issues?

I have several WAP2000 (Firmware 2.0.0.5), and while they work fine for PC's, iPhones, iPod touches cannot connect to them.
Well, they connect briefly, get an IP address from the router, and immediately drop the connection to re-connect again.
I have tried changing channels, eliminating all but one of the AP's, and so forth.
Has anyone else had issues with this firmware? I see posts where people are saying their iPhones connect up fine. This happens on versions 3.x and 4.x of the iphone O.S. It's not limited to one iphone or ipod touch; we've tried several.
If anyone else is running 2.0.0.5 of the firmware and they are having success with an iphone, can you please tell me your settings?
Thanks in advance!
--Greg

Greg,
I think I have the same problem but with a Blackberry Storm 2. (I posted in the last two days--Look for WAP2000 and Storm 2) I see the Storm 2 connect successfully to the WAP2000 but then never establish a connection to the Blackberry Enterprise Server (BES)...Necessary to do anything useful with a Blackberry device. A few months aga (Before I had my Storm 2) I had borrowed an iPhone for a week. During that time I tried to use my WiFi but it never seemed to work (ie Established a WiFi link but then couldn't do anything else with it.). Since I didn't have it long and WiFi wasn't the object of my testing I ignored the problem. Now troubleshooting my Storm 2 problem and realizing that other WiFi devices on my network have been experiencing issues (the Storm 2 appears to have been most impacted) it is very likely that the iPhone I borrowed was experiencing the same problem.
You can read my previous post but a quick summary--> When I used a packet analyzer (Wireshark) I saw that my router was issuing ARP address discovery broadcasts to the Storm 2's IP address but the Storm 2 was not responding. I had tested the same setup with a different wireless access point (Linksys WAP54G) and saw the Storm 2 properly respond (and the Storm 2 worked perfectly when connected to the WAP54G). I concluded that the WAP2000 was either not forwarding the ARP broadcast to the Storm 2 or it was not forwarding the Storm 2's response back to the LAN.
I created a work around the now allows my Storm 2 (and multiple other devices) to function successfully on the network. I have a Cisco ASA5505 firewall that has a ststic ARP table and is capable or proxy-arp (ie. It can respond to ARP requests on behalf of devices on the network). I simply created an entry for my Storm 2 and now it functions properly. I also had a laptop and an IP security camera that had intermittent connectivity issues. When I added static ARP entries for these items their problems disappeared as well.
I don't think this is a settings issues so I am hoping Cisco confirms this as a bug and issues a firmware update.
I hope this helps.
--Gerhard Wittreich

IPad mini and itouch storage filling up daily problem...similar to many post but only fix is restart and last about 1 day and fills up with "other" no new downloads very few apps...waiting for software fix since so many having same problem. Help

Similar to many others storage mystically filling up everyday with nothing new being put on. Only solution is to testers ipad then get totally free storage until later that day or next day. Hoping for a software fix.

How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
What is Stored in iCloud and What is Not
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/what-is-s tored-in-icloud
 Cheers, Tom

HT4108 iPad 2 and HDMI converter issues

Does anyone have an ipad 2 and find that most mirroring works fine EXEPT video (sound, but no picture) and Keynote (I can see the slides up until I try to play my show, then TV goes black)? I have a presentation in a week; please help!

Jakobus-
Do you happen to have an HDTV-to-Standard TV converter box? If so, check to see if it has alternate inputs that you can try with either of your cable/adapters. You may find a combination that does what you need.
Fred

FMS3 and FCS Connectivity Issue

When FCS and FMS3 connection takes place, i get following
error in FCS's Machine regarding the FCS crash.
"Macromedia Flash Comminication Server MX 1.7.1 r98 has
encountered a problem and needs to close. We are sorry for the
inconvenience.
Error signature
szAppName : FlashCom.exe szAppVer : 1.7.1.98 szModName :
js32.dll szModVer : 0.0.0.0 offset : 000033c1"

This is just a guess as I'm not a Transall user. My first guess is that your DSN will need to be made using the 32-bit ODBC driver. As a default, using Windows 7 or later, you created a 64-bit source.
To create or modify a 32-bit DSN on 64-bit Windows, you must run C:\WINDOWS\SysWOW64\odbcad32.exe. You may find it useful to create a shortcut to this on your desktop or Start menu if you access it frequently. I believe the interface is exactly the same after that.

Ipad 1 and iTouch connection issues

Similar Messages

Maybe you are looking for