IPad 1 no reaction on USB Connect - Charging Plug works

Please help me. My used iPad 1 i bought 1 week before is going crazy. When i connect my iPad 1 to my Mac or PC it shows no reaction and plays no sound. When i connect it to Charging Plug it will charge. The iPad is also not seen by iTunes in Revovery Mode. Any Ideas? - Thank you!

Sorry, one more Information! The iPad was working a few days ago on my Mac.

Similar Messages

How can I use Active Print on my Ipad and print to my usb connected HP officejet 6110 all in one

I was previously able to use Active Print on my Ipod to print to my usb connected HP officejet 6110 all in one. Now, however, with my Ipad version 2 I can no longer get this to work. Can anyone help? Thanks.

Hi,
HP do not provide any USB connection solution for iOS.
As Active Print is a 3rd party application which provide this functionality, i believe you may find a better help within Active Print support as they more familier with their application requirement and functionality:
http://www.activeprint.net/support/
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

USB connectivity policy not working on 1st connect of device

Hi,
I have an problem concerning my USB connectivity policy. My endpoint zone is blocking all USB devices. Users do have access for known USB devices (USB storage devices) I have put into another USB connectivity policy which is attached to the User objects. In general everything is working fine, unknown devices are blocked and registered devices are allowed.
But I have weird behavior when a new,unknown USB device is connected the very first time. Then Windows starts detecting it, installs the driver but does NOT deactivate them. The device is displayed and accessible through the Windows Explorer. It seems something is blocking the Endpoint agent from deactivating it. Windows Autoplay and Autorun Function already HAS BEEN disabled. No Antivirus is installed on that system.
The ZES log files contain many of these messages:
""USB-Massenspeichergert"(USB\VID_0781&PID_5151\0775131 B33009E3D) failed
[09.04.2012 10:45:19.692][14] Component: Always: ZES Component Manager: Reboot Requested by: Device Watcher (Suppressed)"
Same behavior i had when Autoplay was still active: Once the Windows Autoplay did automatically open a folder or file on a new stick, the Endpoint agent was unable to deactivate the device. This seems not to be a very reliable method to block devices...!
When I disconnect and insert the device again, everything is fine (blocked). Problem only appears on very first use of a device!
My questions:
Can I somehow prevent that Windows displays new devices in the Windows Explorer before they are blocked? I would prefer that they FIRST are evaluated and THEN will be accessible for the User?
Is there another place in ZCC (except by adding USB connectivity policies to the zone) forcing the endpoint agent to block devices?

What version are you using? If you're not using the latest 11.2.1 MU1, then please upgrade.
For autoplay, you can block this with a policy setting as well (disable autorun and/or autoplay).

Usb connection doesn't work for hdr-cx260v on my computer

This is a (mostly) on and (sometimes) off issue. I have previously worked with Sony and have occasionally succeeded. Using the 'extra' 16gb card works to connect and load. My problem is when I'm using the video stored in internal memory and using the usb connection. If/when I ever actually load the internal memory data (I actually have already loaded most of it, but not the most current), I intend in the future to use only the 'exernal' memory card. My most recent call to Sony indicated that I don't have any support since the camery is 2+ years old - they send me an e-mail to a site that gave instructions, but the instructions don't seem to solve my problem. I don't seem to have any problem connection other 'devices' to my USB ports.

When I connect the camcorder usb to my desktop pc (using different USB drive connections), my computer does not seem to recognize any of the connections. When I use another usb memory card to the same usb connections, the computer does recognize the drive. There have been a few times when the camcorder has recognized the camcorder connection (most recently about June 12) - but it does not at thie time. If I take the extra 16gb memory card from the camcorder and connect it to the memory card connection, the computer has always recognized it. My problem is trying to get the video from the camcorders internal memory through the USB connection.I expect if/when I can get these files loaded, I intend to no longer use the camcorder's internal memory, and insted always use the extra memory card. Pierre I realize that If I could have the laptop recognize the usb connection, I could manually copy the video files myself, although I believe PMH would also have worked in this case.

USB connection doesn't work on Vista?

Hi all,
I have a problem that PC Suite just doesn't see the phone via USB under Windows Vista, but it worked just fine under XP. The only difference I see is that PC Suite installed along some "cable drivers" for XP, but for Vista.
I've seen some people complaining about problems under Vista about a year ago, but that was supposedly fixed in new PC Suite versions. Has anyone heard anything about connectivity problems under Vista?
I tried the latest PC Suite version, 6.85.12.0,
my phone is E70, Windows Vista Home Basic
Andre

When I connect the camcorder usb to my desktop pc (using different USB drive connections), my computer does not seem to recognize any of the connections. When I use another usb memory card to the same usb connections, the computer does recognize the drive. There have been a few times when the camcorder has recognized the camcorder connection (most recently about June 12) - but it does not at thie time. If I take the extra 16gb memory card from the camcorder and connect it to the memory card connection, the computer has always recognized it. My problem is trying to get the video from the camcorders internal memory through the USB connection.I expect if/when I can get these files loaded, I intend to no longer use the camcorder's internal memory, and insted always use the extra memory card. Pierre I realize that If I could have the laptop recognize the usb connection, I could manually copy the video files myself, although I believe PMH would also have worked in this case.

Ipad–external hard drives and USB connected devices

Is there anyway to hook up an external hard drive to the iPad?
are there any programs which allow working in layers on images?

This is a question I would also ask. I have a Canon pro camera with 8Gb Compact Flash and I would like to be able to connect my camera via USB2 through an iPad to a portable HDD as a solution for downloading in the field. Why on earth did Apple not include USB functionality in this device. Even cheapo $300 netbooks all have multiple USB ports. Sure the current config is ok for most users, but why not have options on a more expensive model such as USB ports and an internal HDD for those needing such. My same gripe with the iPod. I have the 120Gb Classic. I really wanted an iPod touch with 120Gb HDD, but Apple don't make it. Sigh

HP Laserjet USB Connection Does Not Work with Gigabit Airport Extreme

I have set up my Airport Extreme Gigabit edition. It works well for wireless internet. BUT, I connected my HP Laserjet 1300 via a working USB cable, and it doesn't print properly at all. This Laserjet uses the HP Universal Drivers in Vista, which should work with the Extreme if anything should. I have set up and located the printer in Bonjour as instructed.
With the PCL6 driver, I get one page that prints out portions of the test page text, but with most of it missing, and then a second page saying:
PCL XL error
Subsystem: KERNEL
Error: UnsupportedProtocol
Operator: 0x0
Position: 0
The PCL5 driver prints out "a" page, but the text comes out as solid black lines instead.
I have tried turning the printer on and off, the router on and off, and deleting the printer and re-creating it in Bonjour, as suggested by Apple's technical support document. Nothing works. I have downloaded the latest Windows software and router firmware for this product, both of which were released recently. Same result. I also tried connecting my laptop via a Gigabit port instead of wirelessly to see if that would help. Nope.
I have seen a few postings in other forums (not here) saying that the Airport Express (Gigabit) firmware has problems with HP printers connected via USB, which seems hard to believe given their ubiquity. If that is the case, I'd appreciate a straight answer from somebody on when it will be fixed. Some have suggested just using Ethernet, but I purchased this product (and therefore paid extra) for the USB print server, and expect to get that working.
Thanks very much.

I have an HP laserjet 4L with a usb adapter connected to the airport via a usb hub, and have had little trouble, except for last night it kept printing 1 partial page over and over. I printed multiple pages at once, I figured the printer just OD'd, after all its an old printer. I have one laptop that uses Vista, and its always giving me grief. Vista

Teamviewer on ipad-3 via usb connection

Hi Guys,
I wanna use teamviewer or any RD (remote desktop) App on my Ipad-3 using only "USB" or wired connection without connecting through wi-fi or internet. The reason is obvious as it's far too slow to use remote applications using wifi then it will be using direct connection. I got windows 8.1 on my pc and wanna use it on my ipad-3 via teamviewer through usb connection. Any ideas or suggestions appreciated.
Regards.

If you typed in the redeem code, then it's in your store credit.
Click on the app you want to buy... it will be removed from your store credit.

It show USB connection screen after update my iPad

Hello everyone
I have updated my iPad to the latest software this morning and during the updating it suddenly show a USB connection screen. I have following the solution instructions from internet but this does not solve my problem. My iPad does not show the red line when I hold the sleep/ wake bottle. No matter what I did for my iPad, it always show a USB connection to my iTunes. Anyone can helping me solve this problem? Thanks a lot!

You are in Recovery Mode. Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You need to be patient and repeat the above many times to recover your iPad

Acura USB Connection Problems After iOS 8.2 Update

I have a 2014 Acura MDX and prior to the iOS 8.2 update, I could play music either via Bluetooth or the USB connection through the iPod "source" (though the USV connection had far superior sound). After the update, the USB connection doesn't work anymore. Same cables used and the iPhone picks up a charge so it is not a bad connection. Anyone else having the same issue?

this happens also to me. Opel Astra / GM version in Europe.
8.2 totally killed audio via USB cable. Connecting results in "no supported audio files found"

HP 8630 print from USB connection and wirelessly

I have my HP 8630 set up with a USB connection to my PC. How do I also set it up to print wirelessly from my laptop or IPAD while still retaining my USB connection? Is that even possible to have two different methods for printing?

Hi,
You may keep both USB and network conenction with no issues.
From the printer front panel click the Setup icon and then click on network and follow the Wireless Setup Wizard to connect the printer to your router.
Once you are done the printer should now be accessible on the network and can be used on the iPad.
On your PC open teh HP Officejet Pro 8630 software and open the Utilities tab.
Click one Printer Setup & Software and select Connect a new printer.
Follow the steps by selecting Wireless connection, at the end you should find two print queues of the pritner, one include Network in its name and then other one doesn't.
Please let me know if you may experience any problem,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Nokia c5-03 usb connecting error

hi i have nokia c5-03.there is no memory card present in my phone.but when i connect my phone to pc through cable the erroe comes in there (memory card not present usb connection may not work as expected) anyone know what's the reason is this... plz help!

Answered your question in the other forum mate.

Camera connection kit not working with ipad2

I have had no problems using my camera connection kit, and have downloaded plenty of pics and films, but it now seems that since I have updated to recent IOS it now no longer works and just comes up with the 'this accessory is not supported by ipad' message.
Anyone got any ideas? I have tried several SD cards and several cameras, so it is a problem with the ipad itself by the looks of it. I have tried a soft reset, turned on/off etc.
Many thanks in advance.

I have a 5 in 1 (not Apple) connection kit and like most others was pulling what little hair I have out trying to use the SD card reader on my IPAD 3 (probably the same with the Ipad 2), it simply does not work since the recent software upgrades. However I have just discovered that my camera USB connection lead DOES work when connected to the USB socket of the 5 in 1 connector. You will need to move the little black switch on the connector to the USB position. Once connected it shows an import icon which then allows scroilling through every photo on the camera. I can now import selective or all photos and it saves spending out £25 plus on an 'official' connector. Hope this helps.

Since upgrade to IOS 10.9 and associated iTunes 11.1.3, I can no longer WiFi sync iPad (IOS 7.0.3) nor iPhone (IOS 6.1.3). USB connection is required. Formerly I could sync both devices without locating them physically (not necessarily charging).

Since upgrade to OS 10.9 and associated iTunes 11.1.3, I can no longer WiFi sync iPad (IOS 7.0.3) nor iPhone (IOS 6.1.3). USB connection is required. Formerly I could sync both devices without locating them physically (not necessarily charging). I have restarted both devices, turned off and on "Sync with this iPad/iPhone over WIFI" and restarted WiFi. WiFi is operating (iPad has no SIM). What next?

I'm also affected by this bug in exactly the same way as you.
Some users have had success by closing iTunes, enetering (on OS 10.9) settings --> network --> edit locations, then create a new location with the same wifi/network settings. Then restarting iTunes.
Others have had some success by editing settings --> iCloud --> de-selecting keychain
neither of these fixes have worked for me.
It appears that the iPad can "see" iTunes running on my iMac because when I open settings --> general --> 'iTunes wifi sync', "sync now" is greyed out if iTunes is not running. When iTunes is started, "sync now" is enabled but just doesn't work. Nor does the iPad appear in iTunes.

TS2634 When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

Well ... the charger is the original charger and just checked and confirmed it is a 5.1V charger. How come? Next is why when i connect my iPad via original usb cable, no response from macbook pro? used to sync with iTunes now totally dead.

IPad 1 no reaction on USB Connect - Charging Plug works

Similar Messages

Maybe you are looking for