Ipad 1, setting not opening,cant reset the ipad.
ipad 1, cant open setting,cant reset the ipad.
Try reset a few more times.
Hold the Sleep and Home button down until you see the Apple logo.
Similar Messages
-
I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks
>SystemPreferences>Network>DNS
-
my problem is my iphone 4s is connected to wi-fi with full signal(3 bars) strength but freezes when browsing and says
"Cannot Open Page"
"Safari could not open page because the server stopped responding"
I already reset the iphone to its factory settings and erase all contents but still the browsing speed freezes or not searching at all. Sometimes it will work and fast but then the problem uccors every now and then. Iv'e been using iphone 4 for two years and I still have it and works fine compared to this IPHONE 4S.Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
IF that does not work -
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Finally - if problem still present -
Go to Settings>General>Reset
Reset the network settings - you will need to add the password of your home WiFi in your phone once more
The device should turn itself off & back on then go into Settings>Wifi and join your network -
i cant reset the security questions i forgot them so what do i do? and i cant find the reset secuirty question to click on it
Alternatives for Help Resetting Security Questions and/or Rescue Mail
1. If you have a valid rescue email address, then use this procedure:
Rescue email address and how to reset Apple ID security questions.
2. Fill out and submit this form. Select the topic, Account Security. You must
have a Rescue Email to use this option.
3. This is the only option if you do not already have a valid Rescue Email.
These are telephone numbers for contacting Apple Support in your country.
Apple ID- Contacting Apple for help with Apple ID account security. Select
the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
set up a rescue email address in order to reset them. You must set up
the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
Apple ID- All about Apple ID security questions. -
Safari could not open page because the server stopped responding
"Could Not Open Page.... Safari could not open page because the server stopped responding"
....but it could worked just fine for the first 2 weeks of iPhone4 ownership.
WiFi network at home, working fine with MacBook, visiting friends' phones, my new iPhone4 - no problems. Had to power down the modem & router very briefly last night. Rebooted, MacBook connected fine, iPhone doesn't - it goes through the motions - shows all signs of full connection, full signal, password accepted etc etc - but web pages will not open, displaying after 30 secs the warning message above.
Tried at work on another wireless network - same response.
Have gone through all the FAQs, reset network settings, forgotten network etc - still nothing.
Anyone experienced the same and fixed it?
cheersI'm having a very similar problem, but it's with my 3G connection, not with wifi. The display tells me there is 3G connectivity, and I get the loading symbol, but pages stop loading a few seconds after I try to open them, and some time later I get the "server stopped responding" message. That happens with addresses I know are working, such as Google. Some times, restarting the iPhone or the internet connection (by switching plane mode on and off) solves the issue, but it has been happening often these days.
-
HT1923 My itunes will not open due to the Apple Mobile Device.
My itunes will not open due to the Apple Mobile Device. When i try and start it on control panel it says i cant. i unstalled Itunes and the components and then reinstalled it like the website says and the same problem occurs. can someone help me please?
Try updating your QuickTime Player to the latest version. Does that clear up the DEP errors in iTunes?
-
Telent:could not open connection to the host on port 23 connect failed
Hi,
How to run commands of OEL5 host OS from windows XPP virtual machine(Vmware Player) on standalone desktop PC?
While runing the telnet command on windows XPP virtual machine it's gives error
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>cd\
C:\>telnet 192.168.1.2
Connecting To 192.168.1.2...Could not open connection to the host, on port 23: Connect failed
C:\>
Thanks
Regard
GSMuser9230833 wrote:
Launcher means shortcut to execute any file which is inside folder in Linux.Launcher are created on desktop to execute by one click of mouse.You need to create a command file that contains the required instructions to run putty with whatever relevant command line switches in order to start the remote program/process on Linux.
For example, you have a trusted ssh connection (no password prompting) between your Windows account and the Linux vmware account. You need to execute command line +/home/vmware/bin/vmstart myVM+ on Linux.
Your command file in Window will look something as follows:
@echo off
"c:\program files\putty\pssh.exe" vmware@my-linux-server "/home/vmware/bin/vmstart myVM"Once you've create this command file (.cmd file extention), you can create a desktop shortcut for it and assign an icon to it.
However, first test the command file via an interactive console session to ensure it works. Also, I'm not sure you can script telnet using putty - but putty's ssh does support the standard ssh command line and one can execute programs/commands on the remote server in this fashion.
Setting up trusted ssh connections is also important as passwords is a weak security mechanism. It requires a secret to be used and coded into scripts/software that needs to be authenticated.
With ssh you generate a public/private key combination, and provide the public key as unique identifier for your o/s user and platform to a remote server (e.g. Linux). This now enables your platform and o/s user to be authenticated via the privatre/public key pair when your platform establishes a connection with the server.
In putty, generate a ssh key (RSA). Copy and paste the public key into the Linux server account's "+home/vmware/.ssh/authorized_keys+" file. Make sure that the +.ssh+ directory and key have user read/write permissions only. And that's it - no password needed by your account to ssh into the Linux server account. No secrets that need to be kept secret (and that can be stolen and used from any other platform to gain access). -
My iphone 4s stopped working and the flash light is on. I can not open or close the phone. What is going on?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?
-
Someone plz help me out with this problemm... My IPOD TOUCH 2G connects to the wifi network but could not open any of the web pages... i've tried SAFARI, FIREFOX, and OPERA.... nothing in wifi retrieves data!!! it makes me so angry...
possible reasons???? i've searched net.. and many of the people r having these problems... maybe with the ne iOS4.2.1
HELPPPPPPPPPPP????
...Fateh- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reser>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
- Does the iPod successfully connect to other routers? -
Create DC Failed: base-version-set-not-open
About a week ago, I created a new track BAMSPOC2. I imported a number of components into it from another track. Today, I'm trying to create a new DC on this BAMSPOC2 track. However, I keep getting a "Create DC Failed" error such as the following:
Mar 19, 2007 2:31:03 PM com.sap.ide.eclipse.component.core.DCController [Thread[main,5,main]] ERROR: Create DC failed: Unable to create remote path "ws/BAMSPOC2/myvendor.com_BAMSPOCSC/dev/inactive/DCs/myvendor.com/capabilities/_comp/" for component moint point: Could not create remote path /dtr/ws/BAMSPOC2/myvendor.com_BAMSPOCSC/dev/inactive/DCs/myvendor.com/capabilities/_comp/ (Conflict [(pre||post)-condition failed: x:base-version-set-not-open]).
Anyone have any ideas as to what this error is? what base-version-set-not-open means?
A local folder is created: DCs/myvendor.com/capabilities/_comp/
And, I can create DC's on other tracks just fine.
Using NW 7.0.09C:\nwds-extsoa-7.3-EHP1-SP14-PAT0000-win32\eclipse\workspace.jdi\1\DCs\XXXXXXX.com\home\chgemail\_comp\gen\default\deploy\XXXXXXX.com~home~chgemail.ear
can you find this ear in your local drive? -
I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!
Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.
-
Not able to reset the page number in XML Publisher based on each PO
Not able to reset the page number in XML Publisher based on PO
Hi,
I have created a custom purchase report and rtf template. In the rtf template, I have added the page number feature (i.e. Page 1 of 5) from Word in the template. When I run the report for a range of POs, I expect the results as follows:
I have given 3 POs on single request. (PO#1 has 3 pages, PO#2 has 2 pages and PO#3 has 4 pages), the page number on each PO should look like as follows:
PO#1 page 1 of 3, page 2 of 3, page 3 of 3
PO#2 page 1 of 2 page 2 of 2
PO#3 page 1 of 4, page 2 of 4, page 3 of 4 and page 4 of 4
But the page number displays on each PO as follows:
PO#1 page 1 of 9, page 2 of 9, page 3 of 9
PO#2 page 4 of 9 page 5 of 9
PO#3 page 6 of 9, page 7 of 9, page 8 of 9 and page 9 of 9
Here I have to reset the page number based on each PO. If anyone done this already, can you please share with me.
Thanks,
Ram.Hi
One clarification please.
Are you putting Page # of ## in the for-loop section? I mean it should be within For-each@section block.
Even if this doesn;t work, then try using Insert->Page Break after every PO.
Regards
Varun -
How can I have a Pages document that is shared with me under my Pages section and not open it with the link?
Try this.
Open the document and select and copy a few pages, say ten pages.
Open a new blank document and paste the pages you copied into that.
Save it with a new name.
Work on those new pages to see if the problem has disappeared.
If this helps, continue breaking up the large file in to smaller chunks and working on them
You can of course later reverse the process and merge the files into one new one.
This suggestion is based on my experiences with large Word files. Breaking it up in to smaller chunks does two things. First, if there is any corruption in the old file, the new copies might escape that. Second, the Mac is faster handling the smaller chunks. -
Telnet not working i need help : Could not open connection to the host !!
hello all im back today with big problem with telnet i dont know why !!
i have to computers one of them in my home and the other one in my office both of them use windows 7 so
home PC internet IP : 82.205.100.161
office PC internet IP : 82.102.237.175
so i go to control panel and then to windows features and i check Telnet Client and Telnet server
then i turn off my firewall
then i start telnet service
then i execute netstat -ab to know telnet port :
[tlntsvr.exe]
TCP [::]:135 Hacker-HP:0 LISTENING
is there anythink i need to do to get that damn connection over internet NOT LAN !! pleaze help me i still get this sucks error : Could not open connection to the host
peace
Dr.BL@CKDeaTHHi,
Telnet server use TCP port 23 by default.
Here is a screenshot of my lab server,
To verify if the TCP port 23 has been opened, we can use the portqry tool.
Here is the download link,
http://www.microsoft.com/en-us/download/details.aspx?id=17148
Best Regards.
Steven Lee
TechNet Community Support -
Adobe reader X will not open files on the web
Adobe reader X will not open files on the web. It works fine on off-line files.
Hello Ray,
Please try following steps:
1. Run the installed Adobe Reader X.
2. Click on Edit in the menu bar.
3. Then click on Preferences in the drop down menu list.
4. Click on the Internet category on the left pane.
5. Now, make sure that Display PDF in Browser option is checked.
If above steps doesn't work then let me know which Browser you are using, may be we have to do some settings there.
Maybe you are looking for
-
I have just downloaded and installed Thunderbird on a new Windows 8 omputer. I get the message in the headline when I press the Get Mail button
-
Using iWeb to Publish to Google Sites
Does anybody know if you can publish a site created with iWeb to Google Sites? I use me.com so i've never had the need for this and for anything else i use the iWeb FTP function. I have no experience with google Sites. I have a friend who cant afford
-
Hyperion Performance Scorecard Alerter Configuration .
Dears , In HPS Alerter Config File There Are The Following Entires : #Database connection settings hyperion.hps.main_data_store.name=halifax hyperion.hps.main_data_store.url=jdbc:hyperion:oracle://Localhost:1521;SID=Hyperion hyperion.hps.main_data_st
-
How to divide values to several columns
Hi I have a table including values that I want to display in 5 columns. Table structure is: Use_id number (primary key) target id number code number Values in a table are: 1 234 22 2 345 23 3 564 24 4 634 25 5 345 24 6 545 22 7 234 23 8 634 23 I want
-
Running a .swf (Flash file) in JMF
Hi, In my application i have to run .swf(Flash file) file. I have to do it using Java API. Can i do it using JMF.If so, how to do it. Is there any other API available to run .swf files in java. Thank you in advance.