Ipad 1 slows down after installing IOS 5

Adter installing IOS 5 my Ipad 1 slows down considerably. Apps take time to start and especially the writing is so slow that I actually I cannot use the Pad anyomore. I udgraded only because I could not update imoorstant apps (keypad, pages) anymore with the old operating system. But this is no solution. Anyone elseexperiencing this problem or am I the only one?

it just doesn't work...
I used Pages and Keynote and Garageband extensively in ios4, with few problems. now, in ios5 they take quite literally several minutes to load, if they don't crash (usually a 50% chance).
I have been to my local Genius Bar and they suggested "restoring as new", as opposed to "restoring with backup". i took this advice, and did both (post ios5 upgrade) and performance is still just awful.
really loved this device up until now, and could even reliably use it for work. at the moment i have an expensive paperweight and am not at all pleased.
seems i have company here. are you listening apple?

Similar Messages

  • Slow down after installing Lion OS

    My Macbook pro later than 2009 model slowed down after installing the new OS Lion
    any suggestions to speed it up

    First suggestion ,there have been a number of identical user questions like yours, in the Lion Community. If you want to talk to other MacBook Pro owners, try the forum they have.
    http://www.apple.com/support/macbookpro
    What you do not need is some gizmo to "speed up" or clean caches etc.
    Maybe you need to make more room on your hard drive, or add more RAM.
    For now, hold down Command-R and run Disk Utility to check the health of your system drive (Lion Recovery Mode)
    http://www.apple.com/support/lion

  • Has anyone noticed MacBook Air slowing down after installing Maverick

    Has anyone noticed MacBook Air slowing down after installing Maverick?

    Activity Monitor - Mavericks
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy

  • SAP GUI slow down after installed Eastern Asian Language Package

    Hello,
    Have any idea what happened to SAP GUI after installed Eastern Asian Language Package on Windows XP ?
    I am working on smartforms translations in SE63 and during entering the japanese or chinese text my working area is slowing down(problems with scrolling), like missing memory or sth?
    How to overcome it?
    Regards,
    Mateusz.

    There is a known performance problem with certain SAPGUI patches in certain constellations:
    Note 1460669 - Performance problems in SAP GUI for Windows
    You may try to install the newest patches or downgrade to a patch that does not have that problem.
    Markus

  • System slows down after installing AirPort Extreme Update 2007-001

    my macbook's internet related performance has been significantly slowed down recently. i have windows xp installed on my mac from where i can compare the performance of ie and safari or ie and firefox on mac. the result is ie on windows xp is much faster. the wireless connection is even more reliable and has more signal strenth under windows. these "slow" situations of mac only happens recently, and the only thing that i can think of to mark the change is the installation of AirPort Extreme Update 2007-001. please advise what i can do to bring back the good performance of mac. (i.e.:if i type in www.google.ca in the address bar of safari, the blue bar will just be stuck around "http://" for a long time before the simple page gets loaded while the status bar of safari is showing contacting google.ca)

    Same scenario here, though I'm running 10.4.9. on a Mac Pro. I've tried every known fix, but Safari still stalls every few minutes - taking upwards of a minute to continue loading whatever page I was browsing to.
    Other apps, including Mail, Firefox, and Remote Desktop screen sharing aren't affected - I can ping away without issue while Safari is choking, and there is no unusual Safari CPU consumption in Activity Monitor
    Mac Pro Mac OS X (10.4.9)

  • Imac slowing down after installing citrix and Office

    Hi
    I have noticed a slight slowing down in the responsive of my imac (surfing net / carrying out tasks).
    I have plenty of storage space and the only changes made recently are installing Citrix and MS office.
    Does anybody have any suggestions?
    Many thanks
    Paul

    Launch the Console application in any of the following ways:
    Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • IPad apps crash after installing iOS 4.2

    After i installed iOS 4.2 almost any app crashes after a few minutes to the home screen and changes arent saved yet. Some apps handle it a bit longer, some crash right after a minute or so.
    Any idea why or what to do?

    Try the recommendations on page 170:
    http://support.apple.com/manuals/#ipad

  • Major slow down after installing mountain lion

    ....just my bought my new Mac last Christmas ,coming from Windows was a major change,everything was fast,
    then a few days ago I upgraded from OS Lion to Mountain Lion and now everything slow down a lot.
    Everything a try to open from internet browsers to apps,it takes from 30 seconds up to 1 minute and a half.
    Is there anything I can do to return to OS Lion and have the same speed as before?

    Did you run a Time Machine back up before you updated?

  • Internet slow down after installing airport extreme.

    I would like to know if there is a reason this slow down occurred. I have tried a locked setting and now have an unlocked setting. Unlocked because that was the only way I could get nintendo ds to work online. Any suggestions would be appreciated.

    Beanziez, Welcome to the discussion area!
    Unfortunately the Nintendo DS only supports WEP and not the much more secure WPA2 or WPA.
    What slow down? You gave no information on this except asking the question.

  • System slow down after installing Mountain Lion OS

    I recently purchased a MacBook Pro for school, and upgraded the OS to Mountain Lion.  I noticed a slight slow down in the computer.  Is this normal, or is there something I can do to speed it back up?
    SW

    Your processor is alright however the specs on your machine are lackluster.  It has a slow drive and not enough ram.  Your first problem is that with that little ram the computer will use the drive for paging.  Since the drive is 5400 (the slowest hard drives in the world) your going to be waiting.. a lot.  Up your ram and upgrade to a 7200 rpm hard drive youll be happy.  If you really want a gem system upgrade to 8gb ram and get a swift SSD drive. 
    Its a technology problem, not an OS problem.  Newer OS's have extra features that capitalize on modern tech.. 5400rpm tech are like.. 90s tech...   Cant believe they were selling those right up to 2011 or whenever.. criminal...

  • Why has my mac book pro slowed down after installing lion?

    How do I get my mac book pro back up to seepd after installing lion?

    How much free space do you have on your system drive?
    Allan

  • IPad 1 unresponsive after installing iOS 5?

    Not even a week ago, I downloaded the new iOS 5 for my ipad 1. At first it was fine, but after a bit of usage, it would suddenly turn itself off or restart for no reason. Eventually it kept happening more frequently and more quickly. Now it won't turn on at all, it doesn't register in my itunes when i try to sync it to my computer, it is unresponsive when i charge it and it doesn't respond when I attempt a hard restart. I'm pretty sure it's due to iOS 5 because it only started happening after I installed it, so what should I do to fix it? It's still under AppleCare warranty, should I go instore?

    I had the same problem and was ready to throw It in the trash. Last night I erased my iPad and set it up as new iPad instead of restoring. I didn't turn on iCloud until after I deleted my iCloud backup and turned off contact syncing with it. Since then it hasn't crashed and it has had about 4 hours of use. 5.0.1 didn't have an effect on it. Just happy I got my iPad back!

  • Why did my mac slow down after installing 10.4.11?

    I updated from 10.4.9 to 10.4.11. Since then my computer has slowed to a crawl and the spinning beach ball appears every time I click on anything, from attempting to launch Firefox to trying to Force Quit. Is there a way to solve this problem?

    General advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
    The 10.4.11 Combo Updater for PPC Macs is here:  http://support.apple.com/kb/DL170
    And for Intel Macs:  http://support.apple.com/kb/DL172
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.4.11 update here:  http://support.apple.com/kb/TA24901?viewlocale=en_US
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    [b]If you are updating Safari (or just have):[/b]
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up.  If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
    Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
    [b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for  problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    /Library/InputManagers
    ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • IPad randomly freezes after installing iOS 7 - in the middle of watching a video. Touchscreen often very sluggish.

    Updated iPad to latest version of iOS7 and really wish I hadn't.  touchscreen suddenly very sluggish ... I can press something several times for it to "take", some apps suddenly close for no reason, video is doing strange things too - audio will keep playing but the picture isn't keeping up with audio. All videos streaming from latest version of iTunes. is anyone else having these sorts of issues?

    Try This...
    Close All Open Apps... Sign Out of Your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
    If the issue persists...
    Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    More Tips here...
    http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/

  • Imac slows down after installing os/x lion

    Since installing Lion on my iMac a couple of weeks ago, everything on my computer seems to be running slower. It's not unusual to sit and watch the spinning rainbow wheel for 5 minutes at a time, waiting for something to happen. This rarely happened before the the new OS. Even within applications like Safari, Mail and other apps, things do not act like they used to. I find myself having to click on action buttons 2 or 3 times before I get a response. For example, sorting my mail from "by date" to "by contact" rarely works without having to go to the main menu. I backed up my hard drive before the install, so I could revert back, but I hate to go backwards. Does anyone have any suggestions on what might be causing this? Anyone know how to fix it? 

    Try this:
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Maybe you are looking for

  • Document is not a valid PDF file

    Hi, I need help! Iøm trying to upload a visa paper using Adobe-Reader XI and when I upload, it keep saying "document is not a valid PDF file" - what to do now? Maliha

  • Safari wont open - not a new topic but offered fixes dont fix

    like an earlier post on the exact same subject, i tried to launch safari, got the window (empty) and then safari just closes down. i get a report to apple option with an impenetrable message which i send. it's been a couple of months now and i've pre

  • Form Based Authentication in SharePoint 2013: Getting The remote server returned an error: (500) Internal Server Error

    Hi  I configured forms based authentication mode in Sharepoint 2013 site. When i tried to log in with windows authentication prompt it throws the following error The remote server returned an error: (500) Internal Server Error [WebException: The remo

  • Undefined property data in inline itemrenderer

    I get:- 1120: Access of undefined property data. in the following code:- <?xml version="1.0" encoding="utf-8"?> <s:View xmlns:fx="http://ns.adobe.com/mxml/2009"                     xmlns:s="library://ns.adobe.com/flex/spark"                     title

  • User exit when save production order

    Hello, I have to fill the OVERHEAD KEY field value in production order header at runtime based on some calculation. So I need a user exit which can be used to save the value of overhead key. I already tried the exits PPCO0001, PPCO0007, PPCO0006, PPC