Ipad 2 4013-as es 21-es hiba szoftverfrissites utan

Szisztok!
Sulyos gondok vannak az ipad 2-mel, miota megprobaltam friss iteni a szoftvert. Eloszor sikerult a frissites, de magatol kikapcsolgatott a keszulek. Kesobb probaltam visszaallitani a dolgokat, hatha akkor javul a helyzet, de mar be sem tudom kapcsolni az ipad-et, a kepernyojen az iTunes-hoz valo csatlakozast keri, de amikor probalom iTunes-on keresztul ujraeleszteni (visszaallitani), 4013-as hibat kapok, de mar 21-re is volt pelda. Mar mindenfele hibaelharitast probaltam amit a neten talaltam es semmi! USB nem hibas, mert mas keszuleket (iPhone-t) tudok csatlakoztatni, ugyhogy vegkepp nem tudom mit evo legyek.
Kerlek segitsetek, ha tudtok megoldast.
Koszi

It appears to be a security issue addressed in the security patches with the new release today.
Owning a machine that was clean and going to 6.1 will be clean. But on a machine already compromised, will installing 6.1 fix the issue, cover up the issue, not identify the problem and just keep chugging along. Ie. is is time for a new lock of the door of the house, or time to move into a new house?

Similar Messages

HT4623 error 4013 and 21 on my ipad 2 after the new software upgrade. ipad is not usable anymore. please help!!!

Hello There,
please help, I have been trying to get my ipad to work again for hours without luck.
After running the new software update on my ipad 2, I started having issues; device turned off by itself, apps couldn't be downloaded, etc (however it was at least working).
Being frustrated with the newly born issues, I decided to restore the ipad, hoping that would solve the issue, however I ended up with the black screen telling me to connect to iTunes and when I connect and go for restore, I get error message 4013 and 21. I tried re-installing iTunes, upgrading my opp system, but nothing,
Please help!!! Very annoying!!!
Thx

You say "USB can't be the issue...". I disagree. There are thresholds, etc. Maybe the iPhone passes some threshold, but the iPad does not.
You might reboot all devices. If that does not cure it, then check the TS3694 article I attached above.

HT4623 i cannot restore my ipad...it keeps saying error 4013..any suggestions?

my ipad 2 crashed and I was able to get it to the restore phase, connected to itunes and went through the procedure. When done, it said connot restore er

Have you tried the troubleshooting on this page : iOS: Restore errors 4005, 4013, and 4014 ?
If you get the same error with a different cable and a different computer :
If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.

IPad 2 iOS 7 update error 4013

So I was updating my boyfriend's iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have even tried updating in DFU mode and no luck. Anyone git any solutions?

All Apple servers are undergoing a huge number of hits. I think tomorrow or even the next day, all upgrade and activation servers will be in much better shape.
I know this is a pain . . .

The iOS 8.1.2 update bricked my 4th gen iPad. I can't even do a DFU mode restore - error 4013. The iPad worked perfectly before the update and is 16 months old. Any suggestions anyone - except to shout loudly at the Apple support line?

I set my iPad to do the latest iOS update as per usual - over the air and while on charge. When I returned to it, it was non functional the screen was blank. I reset multiple times and at one point got a red screen. I connected it to iTunes on my Mac and tried to force a restore, but this didn't work - even in DFU mode. I have gotten a 4013 error every time. I've tried different cables and different USB ports etc, but no success. It's a brick.

I have multiple Macs around the house and have tried all of them - all with the same results alas. I've restarted, ensured iTunes is up to date etc too.
On DFU mode - yes - that's it. I have no idea what DFU stands for, but it this mode is often referred to as this. I get the 'connect to iTunes' picture and can begin the restore, but the process times out waiting for the iPad. Apparently, 4013 is associated with a cable problem,, but I know the hardware is all fine.
What I want to avoid is just being told to buy another iPad. That would be totally unacceptable for an error caused by an update to a 16 month old device. There has to be some solution!

Can't restore my bricked ipad getting error 4013

HELP. My Ipad has been stuck in a reboot loop. Have tried to restart and resore but keep getting Error 4013. Ipad now useless.
Please help.

Hi, error 4013 could not restore ipad/iphone
I had the same issue as you what I did to reslove the issue was to:
1.   Make sure the ipad is in DFU recovery mode (waiting for you to plug into itunes symbol)
2.   Use an original ipad cable that came with it our from another ipad
3.   Do not use any type of extension cable between the ipad and the pc/mac
4    Before you plug in your cable to the ipad move it to another USB port on your pc/mac one that you have not tried before or normally use
5.   start itunes by right clicking on itunes run as administrator.
6.   when itunes detects in recovery mode start the recovery.
7.   Your pc/mac now detects the ipad hardware again and installs the driver properly again.
8.   sit back and voila.
hope that helps.
regards,
LaCalaTech.

My Ipad air continue to see error 4005, 4013, or 4014 when I try to restore . Although I did all the instructions in the help page , and I changed many computers and I still get same errors . Please help.

My Ipad air continue to see error 4005, 4013, or 4014 when I try to restore . Although I did all the instructions in the help page , and I changed many computers and I still get same errors . Please help.
Ipad air crushes and stuck in loop of apple logo then blue screen.

If you get the same errors on different computer and with different computers then contact Apple : iOS: Restore errors 4005, 4013, and 4014 :
If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.

HT201210 The ipad "ipad" could not be restored. An unknown error ocurred (4013). How do i resolve the problem? Thanks ElroyD

The ipad "ipad" could not be restored. An unknown error ocurred (4013). How do i resolve the problem? Thanks ElroyD

Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
The above comes from here:
http://support.apple.com/kb/TS3694#14

TS3694 iPad can't boot up, error shown 4013

My iPad 2 cant't boot up via iTune, it shown error 4013.
Care to advice?
Thanks

Try another cable or USB port. If you're using a USB port on a hub, disconnect and plug in directly to the computer. Use a port in the back rather than the front. Post back if you still have problems.

No restaura mi ipad 2 marca error 4013

quise actualizar el sistema operativo del ipad 2 al sistema 8.
me podio conectarlo al ituns
actualice mi i tuns y mi sistema operativo de mi macbook tal como me lo indican
reinicé la maquina y desconecte ubs
todo iba bien y ya empezaba a restaurarse el ipad y empezó con el error 4013
y ahora me dice que contacte a uds. empero me puedan ayudar
que hago?

Intente desactivar temporalmente el firewall y software antivirus hasta que la descarga se ha completado
Try temporarily turning off your firewall and antivirus software until the download has completed

Ipad froze, restore error 4013

My iPad Air was in "frozen" mode when I tried to turn it on yesterday morning. I have tried multiple times to re-boot via on/off and home button combinations as well as the iTune restore.
All updates have been installed on my Mac laptop - (latest iTunes and OS). I've tried the "restore" 6 times and continue to get the same message "iPad could not be restored, unknown error (4013)". I have the Restore error instructions to install latest iTunes, restart computer, update OS, use differ USB cable....(I don't have a different PC to restore to). Lastly, use another USB power/cable.
no change.... still no boot or restore, or recovery.
ANY suggestions!!??

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

HT201444 my ipad is stuck on itunes kees saying error 4013

my ipad is stuck on itunes start to restore then comes back with error 4013

Try the suggestions here -> Resolve specific iTunes update and restore errors
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.

So I was updating my boyfriend's iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have ev

So I was updating iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have even tried updating in DFU mode and no luck. Anyone git any solutions

Are you following these instructions?
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

IPAD 2 Restore errors 4005, 4013

I have tried three different computers ( W7 en W8 ), fresh install itunes on one computer, latest version update on other two, different cables.
After reading some forums:
Running Itunes as administrator.
Also manually downloading ipsw files and with shift key trying to restore from file.
Itunes continually gives errors 4005 or 4013.
Sometimes I get a screen:
(FTL:MSG) APPLE NAND DRIVER (AND) RW
(FTL:MSG) FIL_INIT            OK
(FTL:MSG) BUF_INIT            OK
(FTL:MSG) FPART INIT            OK
read new style signature 0x43313141 ( line:389 )
(FTL:MSG) VSVFL REGISTER        OK
(WMR:MSG) METADATA WHITENING IS SET IN NAND SIGNATURE
(FTL:MSG) VFL INIT            OK
(FTL:MSG) VFL_OPEN            OK
(FTL:MSG) YAFTL REGISTER        OK
(FTL:MSG) FTL_OPEN            OK
(NAND) _publishServices:642 FTL capabilities: 0x00000000

If you are getting the same error codes with different cables and computers then contact Apple, it may have a hardware problem : iOS: Restore errors 4005, 4013, and 4014 :
If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.

HT201210 i am restoring my ipad and get error 4013 please help

i am restoring my ipad2 and get error 4013 please help

In case you don't know this, when you open iBooks, click the "Books" button on top and then click "PDFs" to see them.

Ipad 2 4013-as es 21-es hiba szoftverfrissites utan

Similar Messages

Maybe you are looking for