IPad 2 and HDMI adaptor - no sound

Hi,
I have an iPad2, IOS5 and an apple HDMI adaptor. Although I can get video on the TV (Schaub Lorenz sl 32-2 HD) there is no audio output. If I turn the iPad off and then restart it with only the HDMI adaptor attached it reports an error saying incompatible device.
Any suggestions.
Regards,
Andrew

Hi there,
I represent the company who developed the Word World app.
Please visit our support page below for help with the sound issue you are facing.
http://www.beancreative.com/content_1612.cfm
Thanks,

Similar Messages

  • I would like to share my ipad on my Windows machine. I got the Ipad to HDMI adaptor but nothing is displayed on the screen... Do I need any additional softwares?

    I would like to share my ipad on my Windows machine. I got the Ipad to HDMI adaptor but nothing is displayed on the screen... Do I need any additional softwares?
    Actually I would like to have the Ipad connected to pc and then run an application on the ipad (which is shown on my windows machine) and record it on the windows machine... Is this feasible?

    If you have an HDMI connection on your computer, it is most likely an output, it won't recieve a signal unless it's on a video capture card. Recording to the PC could be a difficlut task. HDMI is encrypted to keep you from copying but there are ways to do it. It would also depend on what content you intended on recording. If it's movies you have purchased or rented, it would be illegal.

  • I have a 3rd generation wifi iPad and there is no sound in the device. Can someone please help?

    I have a 3rd generation wifi iPad and there is no sound in the device. Can someone please help?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • When I hook my MacBookPro to HDTV using the moshi MiniDisplayPort to HDMI adaptor, the sound

    When I hook my MacBookPro up to TV using the moshi MiniDisplayPort to HDMI adaptor, the video & audio black out every few seconds. Is there a setting I missed? I read something about the refresh rate possibly causing this, but I can't find out how to see what it is and/or adjust it. I did pick 'best' for the connection...
    Thanks!

    hndatrx90 wrote:
    Get an Apple TV. That will work with your Mac for sure.
    You're kidding, right?

  • My ipad 3 doesnt have a sound on pandora or music

    Hi my i pad 3 doesn't have sound in pandora or music, i reset everything, i did the lock and mute thing, but nothing happened, even the little button that you can use to up and down the volume for music disappeared. Im really concerned because it was working well till yesterday that it muted. I have a piano app and it sound perfect, and i can use the volume from the side, but when i hit home, it just doesn't even show. Help please.

    Try quitting that piano app and if that doesnt work - delete it. Then reboot the iPad and see if the sound comes back. That piano app may be causing the problem.
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If you want to delete the app - tap and hold down on the app icon until it wiggles - then tap the X on the app icon. Tap the home button to stop the apps from wiggling.

  • I have a iPad and I connect it to my tv through hdmi but would like the sound to come out through the headphone socket, can I make this happen

    I have a iPad and I connect it to my tv through hdmi but would like the sound to come out through the headphone socket, can I make this happen.

    Go to System Preferences>Sound>Output  and make sure that you selected the right output. I think if yo use HDMI you might not be abe to select another output.

  • HT4108 Sound- HDMI adaptor Ipad 3

    I have an HDMI adaptor. I can see a picture but I can't heat the sound on my TV (only on my Ipad). Any suggestions.

    Why don't you try Apple TV instead
    http://www.apple.com/appletv/
    http://www.apple.com/appletv/what-is/

  • I would like to display Netflix on demand on my LG TV.  What cables and/or adaptors will I need to connect mp ipad to the TV?

    I would like to display Netflix on demand on my LG TV.  What cables and/or adaptors will I need to connect mp ipad to the TV?

    Thanks  for helping.  The TV has the following open slots:
    Video in
    R          L    video
    audio  image
    PC Sound
    DVI input
    RGB input
    Upgrade port
    Remote control
    I also have a Time Warner cable box (Scientific Atlanta     Explorer 4240HDC). 
    Do I need to go through that?

  • IPad 1 will it stream Netflix with the HDMI adaptor?

    Will IPad 1stream Netflix with HDMI adaptor? In HD.

    i believe it will play with the hdmi cable and all the out put cables
    but not 100 % sure about HD video, i would imagine so, its so hard to find real hd video on netflix, computer hd content can be different from set top box hd content.
    the one thing that netfix won't do is play over airplay they won't support it

  • Having problems connecting iPad 4S to monitor with Apple adapter and HDMI cable.

    Purchased an Apple adapter to connect to an HDMI cable.  The connections were secure and the image on the iPad was duplicated on the monitor; however, there was a lot of "snow" on the monitor.  I tried turning off the power to the iPad and then starting back up, but that didn't work.  Once when checking the connections the image cleared for a few seconds, but then the "snow" came back.  Any ideas?

    sounds like either an issue with the HDMi cable, or the connection at the TV possibly.
    Try another HDMI port on your TV if there is one, or a different cable.

  • Adaptor: MDP- HDMI. No Sound on Mac OS. It works on Windows. Why??????

    So i have an imac 21.5 (Late 2009), and i use a mini display port -> HDMI adaptor to connect it to my tv. The video is fine, but there is no sound! There is no option on the output menu in the system preferences.
    BUT
    if i connect it using windows on the imac (bootcamp) it works fine And it doesnt need configuration.
    Working on windows and not on OS, it *****!!

    Here's some trouble shooting tips for the built in iSight: http://docs.info.apple.com/article.html?artnum=93240

  • Old av/hdmi adaptor with new ipad

    Hi,
      This is probably in the forums somewhere but I can't find it.  So I have an old hdmi adaptor from my ipad2 and now I want to use it with my "new" ipad(3).  I'm getting an "Accessory not compatible" message.  Is this right?  Can I not use the old adaptor with the new ipad?  I'm hoping its just some setting, or there's a workaround for it.
    Thanks!

    It's works with the new iPad. It said "accessory not supported". I clicked OK and now it works.

  • IPad no longer working with projector and HDMI splitter after iOS 6.0.1 update

    I just installed iOS 6.0.1 this morning.  I use the iPad in my business tied into a projector via an HDMI splitter.
    My projector was working fine, I installed the new iOS, and now I can't get the projector to recognize the iPad output.  Just giving me a "no source" message.
    Anyone have any ideas?

    You can try these suggestions and see if any work for you. The first one is definitely an iOS 6 only suggestion.
    Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try again.
    Even though you are connected to the Internet, it might help if you reboot your router anyway. Unplug it for about 30 seconds and thenlug it in again.

  • Hi i upgrade from lion to mountain lion to day on my mini mac,Since the upgrade i am getting no sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever

    Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
    I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.

    Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.

  • On line banking for another person, my Mom, who I have power of attorney for heard ppffzzzttt while inputting Mom's sensitive id info in while trying to log in again? I've had the iPad 3/ 4 & 4.5 and never heard this sound before.

    I tried to access my Mother's bank for online banking. She has had a slow decline with dementia, I'm Power Of Attorney for her. When not being able to sign in, I heard through the iPad 4 Wi-fi 64 gig, a measured buzz sound, like ppffzzzttt. I've had 3  / 4 & 4.5 and never heard this sound before.
    I have had Power of Attorney for my Mom for quite some time. She has been suffering with dementia in a slow then sped up type after her last heart attack. I was the worst candidate for the job but no one else would take it.
    I set up banking on line so I could pay her bills. I am disabled and have trouble paying my own. The iPad again filled those shoes perfectly.
    I logged on yesterday, and the page said, user name not found. I figured it might have been server maintenance or poor typing but even with all personal details the server would not send my user name.
    I became concerned because today I received the Vudu letter that said their headquarters were broken into on March 25th, 2013, and a number of hard drives were stolen with all info they keep on me. They set up an all clear id free of charge for a year, if I wanted to take advantage of it which I did.
    The part that bothers me is when I was inputting my Mother's  sensitive id information my iPad 4 / Wi-Fi / 64 gig emitted a measured buzz sound 3 times. I have had the 3 / 4 / 4.5 / faster processor but did not go for the 128 gig 4.75, and in all that time I have never heard that sound.
    The question, was the bank computer or the FBI probing my iPad 4 and did it place something on it in the memory or damage it in anyway.
    I was on the phone for the next three hours with the good, bad and ugly at Citizens. After talking to an acquaintance bank manager who said she saw no problem and did not know why I could not log in. I spent the next three hours on the phone and ended up talking to a nasty tech who said, it was a rule that I could not do my Mother's banking on line anymore. A "rule" prevented me from acting in that manner. It all, from every party sounded so "hinky," Don Johnson, Miami Vice and wondered if there was a rule at all.
    I asked him why and what triggered the on line banking system to suddenly boot me? The fact I had set it up about one year ago to date and it has performed flawlessly since that time and a whole year later it flagged the account. He said it could have been anything, pressing the wrong key, etc. I knew he was getting edgy so I ended up getting off the line with him because nothing would be accomplished.
    I would appreciate any and all speculations, ideas, or suggestions as I look over banking law, rules, in the next few days. By the way, the money we are talking about is miniscule. A small SS check and an even smaller pension check.
    Thank you,
    halfcack

    That situation went from inconvenient to complicated quickly.  Wait for any pending orders to drop off, wait for things to clear up, wait till your upgrade comes up and then upgrade when your contract is fulfilled.  I would have suggested a replacement phone, I know, with only a month left why couldn't you just upgrade early, but these situations where people try to upgrade early always end horribly and once a phone order starts, it almost cannot finish until something winds up shipped received and returned.  Sorry this happened the way it did.  Definitely not efficient.

Maybe you are looking for

  • Corrupted image in applet from web cam

    Hi there I created a little webcam server application that listens to port 8080 for requests, then displays an image. The image is jpeg encoded frame grabbed from a logitech web cam using the java media framework. I got the code from this forum. I ha

  • How to improve the performance in AM level

    Hi, I am using Jdeveloper 11.1.1.2.0 and weblogic server 10.3.2. How to improve the performance in AM level. Actually i have approx 10 lacs Data but when search the record then it is taking more time. I have following the link.. http://www.gebs.ro/bl

  • Oracle IN clause with collection of elements

    Hi, I am using a IN clause in Oracle DB to pass a collection of custId to retrieve the customer details. If it was 10 or 50 custId's as a collection in IN clause it works fine. But if the collection grows bigger to 500 or 1000 then it is pretty slow

  • Need to upload the z table whenever vendor is created

    Hi all     I have one scenario in which I need to populat one ztable whenever a new vendor is created.     similarly whenver the vendor data is changed I need to downoad the changes in XL sheet.Can     you pls let me know how to proceed. Thanks in ad

  • Accidentally allowed trial to expire

    Worked on hundreds of pictures during trial period. Accidentally allowed trial to end without purchasing. I purchased last night but being a Saturday night, the order will not be processed until Monday.  Dying to know, will I see my pictures again wh