Ipad 2 audio problem after updating to 8.1.2

Immediately after updating my ipad2 to version 8.1.2, the audio is distorted. Even the key clicks are distorted. I've reset the ipad, I've restored the ipad. No luck. Anyone else having this problem? Any suggestions ?
Thanks

Actually, I found out what to do: The mono button under accessibility needs to be toggled on and then off again.
I asked Siri who provided some good links from when the problem happened with version 7.

Similar Messages

IPad Audio Problem after iOS 4.3.2 Update

Had no problems with my iPad prior to iOS 4.3.2. Now, I have lost audio on most of my apps (ABC Player, HBO, Jumbline2,) but not on Netflix, iPod, uTube, etc. Restored device and deleted affected apps to no avail. Called AppleCare and they told me that since I had audio on other apps the problem most likely was that the affected apps were not compatible w/ the new iOS and to wait a few days for updates. It's been a week and still no updates. I don't see any posts talking about the problem I have. Anyone else having this problem?

I too had this problem. I had no idea why my audio quit working. I tried the troubleshooting here and figured out I had accidentially moved the switch by the volume control button on the side. I've been going 2 weeks without audio on most my apps. I changed the side switch to Lock Rotation, but still had to slide the side switch back and forth one time to get it to unmute. Yes, it was simple to fix, once I knew what I was doing wrong. oops : \

[solved] audio problem after update

hi, after the kernel update of yesterday i have a problem with my audio. after a reboot, my audio is totally absent. i have saw that the pulseaudio process is present and activate, and all graphically is ok (all indicators works well). the strange thing is that if i put headphones and then i releave them, all magically works normally!
Last edited by blauman (2014-06-19 17:12:06)

ok i don't need it...i have solved with
Load equalizer and dbus module on every boot
Edit the file /etc/pulse/default.pa with your favorite editor and append the following lines:
### Load the integrated PulseAudio equalizer and D-Bus module
load-module module-equalizer-sink
load-module module-dbus-protocol
on wiki of pulseaudio...i don't know why, i had already done it in past, but i don't know why on my default.pa there aren't these lines..seems now it works!

Solved ( Ipad charging problem after update IOS 7.0.4 )

Its already verified by me ( Technician ) problem solved.
We were working on my customers ipad for 2-3 weeks finally figured out whats the problem.
We replaced new battery, cable and charger did not work. Reseting your ipad also does not work.
Since we fixed customers Ipad. We tried the small charger, 10w charger and connecting to computer it works. Fully charge.
Its easy fixed. Here what you can do. You need to do fresh factory restore. Do not use restore / update
1. If your ipad is dead, slow charging. Find a way to have it charge get it at least 5-10 % charge so that your computer will detect it on Itune.
2. Open Itune, check if your detect it, you see it on top right coner.
3. If you have FIND MY IPAD app you have to turn it off otherwise it wont allow you. To turn it off go to PRIVACY then you will see LOCATION services turn it on
    You also see FIND MY IPAD if its on turn it off it will ask your Apple ID and password. If its off already your ready to go. NOTE: Ipad has to be connected
    on WIFI or 3G
4. Go back to Itune. On the top right corner you will see your IPAD NAME click that, you see another box ( restore / update and restores ipad ) select restore
   Ipad ( Factory restore with new IOS 7.0.4 ) let it finish the restore and your done. It will now Fixed your problem. It should charge using your original charge
or connecting to your computer.
NOTE: If you want to upgarde your IOS to 7.0.4 dont do the update you might have problem. You do fresh Factory restore it install new IOS 7.0.4 no problem.
          If you have data that you need to have to back it up this restore will earese all information on your ipad.
Good Luck, let me know if this help you and dont forget to share it.

The weird iTunes icon.... Does it also show the USB cord on the screen? If it does, that means that you have to restore your iPad using iTunes on your computer. Something went wrong and you have to fix it by restoring the iOS software.
iTunes: Restoring iOS software - Support - Apple

IPad mini problem after update

Since my iPad mini has been upgrade it crash often. I'm getting fed up,every new update supposed to fix bugs but also comes with a new failure.
I will think twice before to buy a iPhone 5 or give a chance to Samsung ?
Hope all get sorted soon.

Try this:
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down until you see the Apple Logo.

IPad password problem after update. Please HELP!

When I attempt to change to my Apple ID in Settings / Store / Apple ID, I am able to sign out and sign in with the new ID. The ID and password have been changed in ITunes also. However, when I attempt to update any apps in the app store, the pop up authentication box has the old ID on it. The ID on the IPad and in ITunes appear to be the updated version. When I go to the settings on my IPAD the correct ID shows up, but I cannot update any of the apps. I have been trying to correct this for 2 days now and I am getting really annoyed.
I don't know if it makes a difference, but my Apple ID and password is not the original ID and password I used when purchasing my Apps.
Any help would be greatly appreciated.

The Apps you bought with your old Apple ID are bound to that specific ID. If you've moved onto a new ID, you'll have to re-purchase the apps. This is why when you tried to update the apps, the Apple ID which you purchased said app with appears in the "password box"

I have Audio problems after 6.1.2 update. What do I do?

Is anybody else having audio problems after updating to 6.1.2? How do I Fix it?

No problems here.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Ipad Wifi problem after 7.1.2 update

Hey there! I noticed a big problem after updating my Ipad Air (Wifi Only) to iOS 7.1.2
When I put the device on standby It disconnects from the Wifi network, so I don't receive any push notification. Then when I start using the iPad again, the device reconnects immediately to the Wifi.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

HT6147 Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem?

Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem? I lost my notes, calendar, songs, games+ more. I've tried everything to restore these, but it won't let me. HELP!!!!'

Restore from iCloud Backup
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork

I have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

i have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

Hi all
Like to share that my AV Adapter problem is solved ... brought it to Apple Service Center as a last resort after the new iOS v5.1 did not solve mine like some others have theirs solved.
In fact, the Apple Service Center tried my AV Adapter and find that it does not work with their iphone and ipad too and flagged for a replacement.
Just this week collected the replacement and tested that the replaced adapter works !
So this "unsupported device" error msg could also be due to faulty adapter .... although it is unbelievable that a "simple" wired connector could so easily breakdown after 1 time use ! I never did believe that it can be broken so easily as we hardly used it after the first testing with our TV on HDMI.
Closing this chapter of mine finally.

Bluetooth problem after update to lollipop

Hi,I've recently updated my 6503 to Lollipop.Everything went smoothly and is working fine, except 2 issues - one solved, second NOT. FIRST (solved) - phone after update waked up and logged to 2G network, with no data transmission (despite it was turned ON). What was strange - my operator's network appeared in 'available network list' as separate 3 NETWORKS ( 2g, 3g and LTE) Switching manually to LTE solved it - now phone is switching between technologies automatically, data transmission is working fine. SECOND AND NOT SOLVED: I'm using the hands-free system built in my car ( mitsubishi lancer, 2008 ) . After update, phone failed to establish connection with it, even hands-free system remained as 'associated device'. OK ... I erased hands-free system from phone, as well as phone from car's memory. Paired devices again - starting procedure from car's side. Nothing better. Erased and paired starting from phone side. Nothing better.What I've observed more: phone after try to establish connection , phone in eye blink looses it. On list of available services of hands-free system (in phone menu ofc) , only 'phone sound' appears, while -as I remember but i'm not sure- before update more (2 or 3) services were detected . PLEASE HEEELP !

Re: Bluetooth problem after update to lollipop As above post, I am also experiencing problems with bluetooth on my Z2:- Phone connection is OK if Bluetooth is turned on the phone for " car is ready". Then I can make and receive calls.
- Playing music on bluetooth does not work after Lollipop 5.0.2 update on my car head unit. Previously connected and able to stream music on 4.4.4 Kit Kat with no issues, looking on web this is not a new issue with Bluetooth connection issues to devices since Lollipop came out so what the **bleep** is going on? I purposely bought a Sony TV, Car Head Unit and Soundbar to ensure everything worked together now the head unit that I only had fiitted in February does not connect which cost me £249!!! No issues connecting to TV or Soundbar but on HU it tries to connect then disconnects and BT Audio Icon on HU display greys out although phone is connected and icon highlighted as connected. I have cleared cache, unpaired and paired again, reinstalled 5.0.2 again through wifi instead of OTA but still the same. Car device: Sony XAV-602BTAndroid version 5.0.2Version: 23.1.A.0.726

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I have an IPad 4. After updating the system, when I try to look at picture on Facebook and make it larger, there is just a "circle" in the middle of the page instead of the picture. Can anyone help me?

I have an IPad 4. After updating the system, when I try to look at picture on Facebook and make it larger, there is just a "circle" in the middle of the page instead of the picture. Can anyone help me?

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

Photoshop CS2 problems after updating to 10.4.5.?

Anybody notice Photoshop CS problems after updating to 10.4.5.?

Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5)

Ipad 2 audio problem after updating to 8.1.2

Similar Messages

Maybe you are looking for