IPad 2 camera glitch
The front camera on my iPad works perfectly but when I try to switch it to the rear camera the camera application itself and the photo booth both freeze up and I have to restart my iPad?
What firmware do you have?? I have the same issue and I have restored and nothing happens ..
Similar Messages
-
after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it? thank you
Hello pichastos,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H. -
IPad 2 camera shutter won't open! PLEASE HELP!
The iPad 2 camera shutter won't open! I restored the iPad 2 and it still won't open. Any ideas?
I'm having the same problem as well with my U.S. bought iPad 2.
My problem occures when I try to switch from the back camera to the front camera, then the shutter will not open. I've tried everything: turning off, hard reboot, reset to factory, and re-applying firmware... still nothing.
I have not tried charging it overnight, will do and post results.
bummer! -
My ipad front camera doesn't working,cannot take a picture this moment,how to fix this problem?
Try closing the Camera app via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Ipad 3 camera shuttle is not working, ipad 3 camera shuttle is not working
My ipad 3 camera is not working; the shuttle doesn't open - any ideas on how to resolve this problem?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iPad has a glitch and I have to reset all the time.
My iPad has a glitch and I have restore it already. Also I've reset it as we'll. it seems like it is ten steps ahead of me sometimes. Is there anything that I missed that I could use to fix this problem.
Try a hard reset. You won't lose anything. If you need to do a restore, your computer should back your iPod up first. Instructions in link below.
Troubleshooting 101
Some topics covered
-Basic troubleshooting steps
-Hard reset instructions
-Manual restore instructions
-Hardware troubleshooting
-Preventive Maintenance
-Anti-theft & recovery tips
-Battery-saving tips
-Repair options
-Contacting Apple
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
My iPad air2 camera was so bad
it it have a lot of noise! Even if photo it in light room (even if in shop)
iis it normal? I expected for iPad air camera better than thisDId you see the noise on the screen? (it was HD movie)
it always happen in some bright scene
but in dark scenes it doEd not happen -
How can I get new iPad without camera?
Dear friends.
I need iPad without camera in my work place.
Can I get iPad 4 without camera? Where? How?
Can I change my iPad 1 softeware and put iPad 4 software?
Can I put iPad 4 inside iPad 1 case?First of all, you can't purchase an iPad 4th Generation without a camera. Second, iPad 4s won't fit into iPad 1 cases, (some may, but the majority won't), lastly, why would you need an iPad without a camera?
-
Can someone tell me how to delete photos off my iPad that came from my iPhone?
I can't delete photos on my iPad that came through iCloud from my iPhone. Can someone please help?
From http://support.apple.com/kb/HT4486 :
How do I delete photos from my Photo Stream in iCloud?
Individual photos cannot be deleted from your Photo Stream. You can, however, delete all the photos in your Photo Stream by clicking the Reset Photo Stream button in your account at icloud.com. The Reset Photo Stream button will instantly delete all Photo Stream photos stored in iCloud, but it will not remove any Photo Stream photos that have already been pushed to your devices.
How do I delete photos from my Photo Stream on my devices?
After deleting the photos from your Photo Stream in iCloud, you can remove the Photo Stream photos from your devices as follows:
On your iOS devices, go to Settings > iCloud > Photo Stream and turn Photo Stream off. This will delete all the photos from your Photo Stream album. If there are any photos you want to keep on your device, make sure to add them to an album or save them to your Camera Roll first. -
how can I delete photos from my ipad that came in when I connected for the first time to my pc? HELP
Photos that were synced from your computer using iTunes can only be deleted by de-selecting them from the folder from where they were synced - and then re-syncing.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Photos Tab on the right.
If you want to remove all of the Photos - uncheck the Sync Photos from Heading
Click on Apply in the lower right corner of iTunes
If you are using iTunes 11 - this will be helpful, Setting up syncing in Windows.
http://support.apple.com/kb/PH12313 -
Help! what is the equivalent focal length of ipad 4 camera?
what is the equivalent focal length of ipad 4 camera?
Your apps is not providing enough information.
I use ExifWizPro App.
http://i1224.photobucket.com/albums/ee374/Diavonex/51b4d31dae7f841332878c77bfe13 9f1_zpscc0bd8a4.jpg -
IPad mini camera pictures look like an xray
My mother just called and said when she is taking pictures they look overtly floresent and like an xray. I am 500 miles away from her and I cant provide a picture because well I don't want the headache.
Any idea what would cause this and in turn how to fix it?
Tried looking this up on google but all I get is links to how the iPad mini camera takes great pictures.
Thanks in advance.ipad was on invert colours no need to fix
-
Why iPhone, iPad, iPod cameras don't connect to desktops/laptops /macmini,
why iPhone, iPad, iPod cameras don't connect to desktops/laptops /macmini, why... ...
Mr. jobs would hv helped me
it it just so simple ...these people are working on icloud, photostream etc etc
think .....if we have a wireless link with the camera of iphone we can record movies and carry out editing at the same moment on desktops that too wirlesssly
its just like have a one way facetime with our desktops......wow
eventually apple people will come up with this same idea later some time
but the question is why it doesnt connect why?They do.
Standby = press the Power button
Power off = Press and hold Power button then slide the red power off slider.
Reset = Press and hold both Reset adn Home till you see the Apple logo.
This option will help to avoid pressing power button less number of times and gives better user experience.
Because it is better to not push the power button and more enjoyable to not push it? -
Why the Flash on my iPad 2 Camera doesnt work anymore After updating to IOS 7??
No iPad has ever had a built-in flash for the camera.
-
Camera Glitching Problem? Help!
I'm fairly new to AE and watched a tutorial on making a nebula thingy. I made it fine and have had no trouble, but for the last 2 days i have spent trying to fix my camera glitching problem. I have to keyframes for my camera, obviousl ythe start and the finish keyframe. But in the keyframes, my nebula thing, keeps glitching back to previous frames. Im not really good at discribing it, so i just screen recorded it so you could see. I have checked countless times to make sure there is no keyframes on anything else, there isn't. I lookoed it up, some say it could be the "boomerang effect" I tried to chhange the keyframes to linear keyframes (as they are at the time of the screen recording), obviously still glitching. I also tried to change the keyframes to "hold keyframes" as another suggested solution, i still get random glitching. So as a final solution, here i am. Not sure if you need to know the stats of my computer, but if you do here they are (iMac late 2012/early 2013, 3.7 Ghz, i7, 8gb of ram, NVIDIA GeForce GTX 680MX 2048 MB). I have also exported the project to a mov file, the glitches are still there. Also, it is supposed to stop abruptly like that at the end.
Here is the link to the screen recorded problem:
http://youtu.be/dmU0YSfI-Es
Also, im using After Effects CS6, Knoll lIght Factory, Trapcode Particular and Trapcode Shine.
Thanks, Hope someone could help.Turn off GPU mode in Knoll and/or in AE by setting the comp viewer to Final Quality. that's some sort of buffer curruption, most likely hardware related... also make sure you are not having other programs running. Even a simple notification pop-up from a messenger can cause such strange artifacts because it temporarily takes the reigns...
Mylenium
Maybe you are looking for
-
Error Message When Upgrading Firmware for BEFW114S
To all, I have a BEFW114S with a firmware 1.42.7 which I wanted to upgrade to 1.52.02 However, I got the following error message when I tried update the firmware: Message: Warning! Upgrade File Pattern Error Any ideas of what might be causing this
-
How to access the EmbeddedFontRegistry in actionscript only code?
Hi, My name is Zach and I am trying to push outside of the flex framework, but keep the advantages of RSL's. I created my own Component/Data Library where all UI objects inherits directly from Sprite. However, when I moved this out of the Flex envi
-
90% of pictures disappeared after adding Maverick. My Time Machine folders were in the right order but mostly empty so useless for restore. Repair and rebuild attempts were not effective. Downloaded my Carbonite file which is now sitting on my deskto
-
I am using a JTable to display tables from a mysql server and this is what happens Everything works fine except when in my views i have a collumn which is made fom a concatenation Here is an example: CONCAT_WS(':',SW.NAME,B.NAME,SP.PORT) this in my t
-
How to reset repeating subforms
hi, i have a table that allows the user to create new rows. It also allows deleting. Is it possible to let the user reset the table on a button click in a more efficient way than the one i describe below ?? Let´s say the user created 10 lines and now