IPad 2 control center for music not working for iOS 7.0

I have downloaded iOS 7 on my iPad 2 and I cannot play music of control itune from the new control center. I have to play it by going to itune itself. Is there a bug on iPad 2 for control center? Other controls like wifi or airplane mode does work.

I have the same issue with the ipad 2, works fine on the iphone 4s, any progress in getting this resolved

Similar Messages

Substitution written under cost center accounting is not working for tcode MB1B but working for MIGO_GI

Hi All
Do you know why this behaviour different for subtitution written under cost center accounting.
We have written substitution using coding block table. Logic of substitution is in case of any GL maintained in a set is being used for posting , then we will replace the cost center with profit center vlaue. Reason being we have same naming convention for Cost center and Profit center.
Thanks
Sonia

Hi,
MB1B is t-code for stock transfer posting.
Stock transfer posting generate FI document using balance sheet account, not P&L account.
Because you don’t create cost elements using balance sheet accounts related to stock, I think that Substitution written under cost center accounting is not working for tcode MB1B is right.

Save for web not working for .PNG?

When I slice up a .psd file and then go file > save for web and select to save the images as .png it does not work for some reason. No matter what I select it only uses jpeg. I am using Photoshop CS2.
Any suggestions?

As Zeno said, file format selection is per slice, not a global override. Select al lslices, then pick the PNG options.
Mylenium

I have a MacBookPro running 10.6.8. I use Bluetooth to link to devices including keyboard and magic trackpad. I bought a Bose Wave III stereo and a bluetooth device. No problem with iPhone, iPad, wife's MacBook. Not working for me. Thoughts?

I keep receiving an errror message that "there was an error with the device." I use bluetooth for all sorts of things, no problem. Anyone have any suggestions?Because the stereo is connecting no problem to every other device, I'm assuming there's an issue between my laptop and the stereo. Thanks.

Apple might fix the problem with SL; they did release the 10.6.8 Supplemental Update, which fixed an HDMI problem. So we might get a fix.
Don't know if this problem affects Lion. I haven't read much about it, since I'm not upgrading for another few months.

Control center and camera not working on lock screen

On the lock screen my control center or camera sometimes doesn't pull up! Also the touchscreen doesn't work sometimes while just using the phone like when typing or in a game. I've tried resetting it and restarting it! Is this a software bug? Will there be an update To fix this?

Hi Trevor318,
Thanks for the question. If I understand correctly, the touchscreen does not respond sometimes and control center doesn't come up. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Use iTunes to restore your iOS device to factory settings - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

Gnome-control-center - User deleting not working,

Hi all,
Using gnome shell, I am trying to delete a user I created for test using the same gnome-control-center; but trying to delete it now but when I press the delete key gnome-control-center crash with the option to delete files - and if I choose to keep the file an error come up: "Failed to delete user - Method "DeleteUser" with signature "x" on interface "org.freedesktop.Accounts" doesn't exist"
See terminal output below:
[sweetth@myhost ~]$ gnome-control-center
libnm-glib.so.4: cannot open shared object file: No such file or directory
Failed to load module: /usr/lib/control-center-1/panels/libnetwork.so
(gnome-control-center:9733): GLib-GObject-WARNING **: gtype.c:4201: type id `1' is invalid
(gnome-control-center:9733): GLib-GObject-WARNING **: can't peek value table for type `<unknown>' which is not currently referenced
(gnome-control-center:9733): GLib-GObject-WARNING **: gvalue.c:191: cannot initialize GValue with type `(null)', this type has no GTypeValueTable implementation
(gnome-control-center:9733): GLib-GObject-WARNING **: gtype.c:4201: type id `0' is invalid
(gnome-control-center:9733): GLib-GObject-WARNING **: can't peek value table for type `<invalid>' which is not currently referenced
Segmentation fault

I didn't recompile it because frankly I do not know where to get the pkgbuild...
See output with 'bt full'
[sweetth@myhost ~]$ gdb /usr/bin/gnome-control-center
GNU gdb (GDB) 7.2
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "i686-pc-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /usr/bin/gnome-control-center...(no debugging symbols found)...done.
(gdb) run
Starting program: /usr/bin/gnome-control-center
[Thread debugging using libthread_db enabled]
[New Thread 0xb265bb70 (LWP 4926)]
[New Thread 0xb1cffb70 (LWP 4928)]
(gnome-control-center:4923): GLib-GObject-WARNING **: gtype.c:4201: type id `1' is invalid
(gnome-control-center:4923): GLib-GObject-WARNING **: can't peek value table for type `<unknown>' which is not currently referenced
(gnome-control-center:4923): GLib-GObject-WARNING **: gvalue.c:191: cannot initialize GValue with type `(null)', this type has no GTypeValueTable implementation
(gnome-control-center:4923): GLib-GObject-WARNING **: gtype.c:4201: type id `0' is invalid
(gnome-control-center:4923): GLib-GObject-WARNING **: can't peek value table for type `<invalid>' which is not currently referenced
Program received signal SIGSEGV, Segmentation fault.
0xb30bbe1c in dbus_g_proxy_begin_call () from /usr/lib/libdbus-glib-1.so.2
(gdb) bt full
#0 0xb30bbe1c in dbus_g_proxy_begin_call () from /usr/lib/libdbus-glib-1.so.2
No symbol table info available.
#1 0xb2dbdcf8 in ?? ()
from /usr/lib/control-center-1/panels/libuser-accounts.so
No symbol table info available.
#2 0xb2dcf600 in ?? ()
from /usr/lib/control-center-1/panels/libuser-accounts.so
No symbol table info available.
#3 0xb788ee23 in g_cclosure_marshal_VOID(int0_t) ()
from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#4 0xb7872eb4 in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#5 0xb78851a0 in ?? () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#6 0xb788e18c in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#7 0xb788e313 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#8 0xb7c449e2 in gtk_dialog_response () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#9 0xb7c44db6 in ?? () from /usr/lib/libgtk-3.so.0
No symbol table info available.
---Type <return> to continue, or q <return> to quit---
#10 0xb788eb2c in g_cclosure_marshal_VOID__VOID ()
from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#11 0xb7872eb4 in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#12 0xb78851a0 in ?? () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#13 0xb788e18c in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#14 0xb788e313 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#15 0xb7bfe14a in gtk_button_clicked () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#16 0xb7bff4b8 in ?? () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#17 0xb788eb2c in g_cclosure_marshal_VOID__VOID ()
from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#18 0xb787177d in ?? () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#19 0xb7872eb4 in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#20 0xb7884915 in ?? () from /usr/lib/libgobject-2.0.so.0
---Type <return> to continue, or q <return> to quit---
No symbol table info available.
#21 0xb788e18c in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#22 0xb788e313 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#23 0xb7bfe06a in gtk_button_released () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#24 0xb7bfe0b4 in ?? () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#25 0xb7ccda62 in ?? () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#26 0xb787177d in ?? () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#27 0xb7872eb4 in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#28 0xb7884fbf in ?? () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#29 0xb788df69 in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#30 0xb788e313 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#31 0xb7e106f3 in ?? () from /usr/lib/libgtk-3.so.0
No symbol table info available.
---Type <return> to continue, or q <return> to quit---
#32 0xb7ccd252 in gtk_propagate_event () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#33 0xb7ccd628 in gtk_main_do_event () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#34 0xb7b235fc in ?? () from /usr/lib/libgdk-3.so.0
No symbol table info available.
#35 0xb7b4a898 in ?? () from /usr/lib/libgdk-3.so.0
No symbol table info available.
#36 0xb77b4eff in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0
No symbol table info available.
#37 0xb77b5660 in ?? () from /usr/lib/libglib-2.0.so.0
No symbol table info available.
#38 0xb77b5d9b in g_main_loop_run () from /usr/lib/libglib-2.0.so.0
No symbol table info available.
#39 0xb7ccc945 in gtk_main () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#40 0xb7be8b44 in ?? () from /usr/lib/libgtk-3.so.0
No symbol table info available.
#41 0xb79432bc in g_application_run () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#42 0x0804c62f in main ()
No symbol table info available.
(gdb) quit
A debugging session is active.
Inferior 1 [process 4923] will be killed.
Quit anyway? (y or n) y

MSI Control Center Green Power not Working

Hey guys, Green Power in the MSI Control Center doesn't seem to report any power saving for me- see pic. I have Green Power turned on in the BIOS.

Quote from: NovJoe on 11-July-11, 15:27:19
The interface is to tell you at what speed and voltage that it is regulating from the stock numbers. That is the way of power saving readings.
How come it doesn't report the "Total Power Savings" in watts?

IPad Mini Retina 4G is not working after iOS 8 update

I have an iPad Mini Retina Cellular, and after the update to iOS 8 4G network data is not working any more. Near the carrier name 4G appears but when i try to access Internet i get this message: Could not activate cellular data network You are not subscribed to a cellular data service. On 3G Internet works fine.
Other problems: Multitask Gestures are not working always, only after i swipe down notifications

Hello WinGoWithBush,
Thanks for using Apple Support Communities.
In order to resolve this issue where your iPad is not charging, I'd like you to please ensure you are using the correct power adapter as depicted in the support article below, as well as making sure the cord and outlet you are using are both functioning.
iPad: Charging the battery
Take care,
Alex H.

Using iTunes Match, Show All Music not working for one playlist

I am using an iPhone 6 Plus with iOS 8.2. I just recently subscribed to iTunes Match and all of my music has been matched/uploaded.
When I turn on iTunes Match and Show All Music on my iPhone, all of my playlists show up but one of them is incomplete, and doesn't have an option to download the missing songs from the cloud.
So, for example, I have a playlist that on my Mac has 696 songs and they are all matched by iTunes Match, and they all appear as either already on my phone or downloadable. Most of the other playlists are the same: working as expected. But I also have a playlist that on my Mac has 58 songs and they are all matched by iTunes Match, but only nine of them appear on my phone (they were already there), and none of the remaining 49 are showing as available to download from the cloud.
Is it possible to fix this? I've had bad luck in the past deleting playlists on the phone with the goal of having them refresh during the next sync. (The bad luck involved my playlists being deleted in iTunes on my Mac after the sync.)

Hi Michael,
thanks for this, this helped me out as I just had the same issue but on my iPad lol.
Forgot about that setting even though I knew about it, just goes to show, out of sight, out of mind.
Regards,
Steve

Embedded glyphs for alpha not working for non-Latin letters

Even after reading through all the posts here, I'm still
confused about why embedding is necessary for alphas on text and
how embedding works, so maybe someone can sort it out and help me
with my problem:
I have a FLA that is trying to present the same script in
(the user's choice of) several languages -- including non-Latin
alphabets like Korean, Japanese, Russian, Chinese and Arabic. I'm
using the Strings library to load translations into my text movie
clips on the stage.
The language stuff works great except that alpha tweens
weren't working. So I selected the movie clip symbols (three of
them) in the library and told Flash to embed all glpyhs. Each of
these symbols is using Trebuchet MS, so my thinking is that I'm not
exceeding the 65K limit because I'm embedding the same glyphs for
each. (But I'm not sure if that limit is for the SWF or per
symbol.) I only have one other font in the FLA and for that one,
I'm just embedding English alpha characters.
(Perhaps as an aside, I also included these fonts Stone Sans
and Trebuchet MS as fonts in my library, but I don't understand
whether this is absolutely necessary or if embedding glyphs
eliminates the need for these.)
So with those glyphs embedded, my text alpha tweens work
beautifully. However -- and this is where I begin to shed tears --
all the Korean and Cyrillic text is gone. It's just punctuation and
no characters. I don't have Chinese, Japanese or Arabic text loaded
yet, but I imagine that these would suffer from the same problem.
What am I doing wrong? Do I need to create more than one
movie to achieve my multilanguage goal? (Or worse, render each
language separately? -- yuck!) In my old version of Flash (just
up'd to CS3) I could tween alpha text with no problem, so why is
all this embedding even necessary?
Thanks,
Tim

Is this just impossible? Or really hard?

Fallback for Spengo not working for Firefox even though it works for IE

Hi,
I am using firefox, 3.6.8. I am trying to connect to an AppServer which uses SPNEGO as an external user. I have a fallback set up so that if it is an external user and SPNEGO fails, the AppServer will revert to Applicate Security which is simple BASIC authentication.
The fallback works ok for IE but not for Firefox. If I try to access the site, firefox just tells me:
SPNEGO Authentication not supported on this client and the fallback never happens.
== This happened ==
Every time Firefox opened
== When I first tried it

Did you try any of this:
https://encrypted.google.com/search?hl=en&lr=&tbs=qdr%3Ay&q=%22firefox+SPNEGO%22&btnG=Search
Also, update your Java to the current version and clean out the old Java Console Extensions. See:
http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions

Office for mac not working for all users after migration

Recently purchased macbook retina display and used migration assistant to move everything over from a macbook pro 17" (late 2011). After the migration my login (admin rights) has no problem on the new macbook, but my wife login cannot use the Office for Mac without being asked to do an install.
Problem is, the version we have goes through the install and then asks to 'register' the product and the version is no longer supported so you cannot register, therefor the program will not run.
Am I missing something here? Everything still works on both of our sign in's on the old macbook pro, and on the new macbook retina, office works on my sign in only.
The original install was a download version, so there are no 'disks' to do a re-install.
Any suggestions?

You need Acrobat 7.1
Is your Office 2004 up to date?

Check for update not working for Patch 2???

I am running 1.0.0.14.67. When I run the Check For Update command it says there are no updates available even though Patch 2 is now on the OTN site. Is there anything I can try other than downloading the whole new zip and migrating my install?
Previously I have successfully used the update centre to install new patches for the various extensions, so I don't think it's a problem with my firewall settings.
Cheers, APC

Ok - one other thing. If you run check for updates, then the front "Help > About " will not change. So this will still show 1.0.0.14.67, but the Extensions tab will change. Can you just confirm that? Check out the screen shot in this FAQ. So the various extensions will show the 15.57 updates if patch 2 is already installed.
As far as I'm aware we do not have the patch set available as a separate bundle. I'll have to wake to for Kris to get in (west coast) before we can check that.
Sue

Upgraded Adobe Flash Player for Mac not working for Youtube

There was a similar question already asked today. I also tried to watch a video on Youtube from a Mac (OS X 10.5.8) and Safari (ver. 4.0.2). However, instead of the video a recommendation to "Go Upgrade!" comes up on Youtube with the following link: http://get.adobe.com/flashplayer/
I picked the right operating system, installed the player, restarted the computer, but am still getting the same message "Go Upgrade!" on Youtube.
Also, in the other message you recommend to go to http://www.adobe.com/software/flash/about/ but I cannot see a Flash animation on that page.
Can you help? Thank you!

There was a similar question already asked today. I also tried to watch a video on Youtube from a Mac (OS X 10.5.8) and Safari (ver. 4.0.2). However, instead of the video a recommendation to "Go Upgrade!" comes up on Youtube with the following link: http://get.adobe.com/flashplayer/
I picked the right operating system, installed the player, restarted the computer, but am still getting the same message "Go Upgrade!" on Youtube.
Also, in the other message you recommend to go to http://www.adobe.com/software/flash/about/ but I cannot see a Flash animation on that page.
Can you help? Thank you!

Hi, i have Ipad 4 the mic is not working skype account can you tel me what i can do to get it working.

Hi,
i have ipad 4 the mic is not working for skype account can u tel me what i can do to get it working?

No Japanese carrier provides unlocking services. Therefore, your phone must have been hacked to unlock it. That hack was removed when you updated the software. You need to be a legitimately unlocked phone.
Best of luck.

IPad 2 control center for music not working for iOS 7.0

Similar Messages

Maybe you are looking for