IPad 2 - did an erase and reset and now it will not respond

I did an erase and reset on my iPad 2 and now it will not respond, not even by plugging it in to a computer.
I attempted to do this last night before 10pm and it is after 1pm and is still "cycling".  (The little circle in the middle of a black screen that just goes round and round)
I've tried to power off with side and front buttons and I have plugged it into the computer as well.  Computer is not recognizing it is even there.
HELP!

Powering Off by using the two buttons? Did you reboot it this way?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Similar Messages

  • Printed photos on my HP Photosmart Plus B210 from my iphone a few times, but now it will not respond

    Printed photos on my HP Photosmart Plus B210 from my iphone a few times, but now it will not respond.  My phone still recognizes the computer, but nothing happens.

    Hi @maka4868
    Welcome to the HP Support Forums.  I understand that you are no longer able to print to your Photosmart Plus B210 printer from Microsoft Word.
     I am presuming that you are using a Mac Operating System as indicated at the top of your post.  I have done some research and found Microsoft’s document titled Troubleshooting damaged documents in Word for Mac.  It has the steps when printing from Microsoft Word 2008 for Mac.
    Please let me know the outcome.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • I open Acrobat X Pro and it open and shut down, now it will not open at all what can I do to correct the problem?

    I open Adobe Acrobat X Pro and it open but shut right down and now it will not open at all what can I do to correct the issue?

    Hi shortydm1964,
    Please follow the steps given below:
    1.Delete all the files from following folders:
    2.C:\ProgramData\Adobe\SLStore
    3. C:\Program Files (x86)\Common Files\Adobe\SLCache
    4. And, delete all files from following folder except cache.db
    5. C:\Program Files (x86)\Common Files\Adobe\ Adobe PCD
    Now, launch the product and activate again with a new serial number.
    I hope this would resolve your issue.
    Regards,
    Anubha

  • Computer crashed had to uninstall everything and re-install now it will not let me activate my photo

    computer crashed and had to re install photoshop CS2 and CS# it installed but will not let me activate them

    Mfarmer73 you will need to contact our support team to resolve your activation issue. For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6.  Our chat representatives can provide a personalized experience to resolve the issue you have described.

  • We installed Windows XP net framework KB982524 yesterday, and ever since then mozilla will not respond when we try to open it.

    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    We had a Windows XP net framework update yesterday KB982524, and ever since than when we try to log on to mozilla the program will not respond. We tried re-starting a couple of times with no luck.
    == This happened
    ==
    Every time Firefox opened
    == yesterday June 23, 2010
    ==
    == User Agent
    ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; GTB6.4; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 1.1.4322; PeoplePal 6.2; PeoplePal 3.0; .NET CLR 2.0.50727; IEMB3; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; yie8)

    I have a similar problem. I updated Firefox to 3.6.4 a few days ago. Then I tried to load Microsoft update KB982524. KB982524 would not load correctly. After that Internet Explorer will not start. I get a very brief flash of Internet Explorer running, then the window closes. So now I cant run Microsoft Update.
    Windows XP SP3
    Firefox 3.6.6
    Internet Explorer 8

  • I upgraded my iPAD 1 and now it will not connect to my wi-fi.  It does not ask for password.  It does recognize wi-fi name.  I have rebooted, unplugged router, 'forget network', and reset network.  Still will not connect.

    I have no idea what to try next.  Please help!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT201442 I removed the 3g module from my ipad 2 3g and wifi. Now it will not restore. Error (1)  How can I fix?

    How can I restore my ipad 2 wifi+3g cdma when I have removed the 3g module. It stops about midway when installing firmware and never finishes with an error (1).

    I'll ask again, what do you mean you tried to "remove the 3G Module"? Are you just talking about the SIM card? or did you physically open the device and attempt to extract the cellular radio chip from the iPad?
    If just the SIM, then this is normal behavior. It doesn't even need to be a working SIM so long as you have WiFi. But it is necessary to activate the iPad.

  • I have installed photoshop elements 13 on my computer, I have window7. It says this computer does not support this. I have had it on here and it worked i had to un install it and re install now it will not work??

    I have photoshop elements 13, It did open up till I had to un install it and re install it, now it is says I need windows 7 or later and I do have windows 7. Can you please help me?

    uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • After working fine for years, this morning lost homepage, settings and themes. Now, Firefox will not open at all.

    I've had Firefox for years. This morning, my theme, homepage, and settings were gone and I could not restore them. Now I can't open Firefox at all, no matter what I try.
    == This happened ==
    Every time Firefox opened
    == This morning

    Firefox keeps that info in a separate folder called your "profile". It's possible that a new profile was created. But does your original still exist? Try starting Firefox in the profile manager to see if there are other profiles listed. See [[Managing profiles]]

  • I recently updated Adobe Flash and Adobe Shockwave, now Firefox will not load. I have uninstalled and reinstalled and still nothing. Help

    Firefox never opens. It is trying but nothing seems to change, no matter how much time is allowed.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls
    See also:
    *http://kb.mozillazine.org/Browser_will_not_start_up

  • My new i phone isnt recognising my apple id, I have been on line and reset every thing but still not responding .

    My new iphone wont recognise my apple id . I have been to apple home page and updated my details, still not responding

    Try making a new Apple ID? I don't really understand what you mean.. Make a new apple ID, log in with that one and then when you are on your phone log out of it and THEN log in our old ID? If you still can't log in the old one then it's most probably a bug or something.. Anyway.. Good luck with your problem!!

  • Pearl 8100 Screen goes blank and Red flashing LED then will not respond.

    Hi,
    This is my first post here (however I'm on other forums as well) I wanted to see if anyone has come across this. 
    Briefly here is the low down...
    * We have BES 4.1.038 (will be updating soon to 4.5 or 5)
    * Platform Version is 2.7.0.66
    * Blackberry Version is 4.5.0.52
    It's also showing on the BES as having communicated with the unit within the last 10 mins.
    any ideas?
    Paul Croker

    Hello Paul_Poker and welcome to the forums!,
    I think in your situation you should look into reloading the software on the device. Just make sure you back up your data before proceeding so you can have a copy of it. Of course the application loader will take of this for you by default. 
    1)  Here is how you back up your device. 
    2)  Here is how you reload the software cleanly on the device (Alternatively, Here is an article on how to use the Web-Based software loader) 
    3)  Here is how you restore your data to the device if it is not backed up automatically
    -tg
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Lightroom keeps crashing.  First I had to keep restarting the program, then my pc. Now LR5 will not respond at all.

    I don't want a discussion. I want support from Adobe.  Can someone from Adobe assist or do they just not support users?

    Contact Customer Care is the weblink for customer support. This is a User-to-User forum.  We will help you but it will be a discussion.  We will want to know things like your hardware configuration, Windows version, Lightroom version, etc.

  • HT201270 My ipad is displaying the carrier settings update box but does not respond to either the "update now" button or the "not now" button and has totally frozen. The ipad cannot switch off as I need to clear this box before I can "slide to shut down".

    Can anyone help me with carrier settings??? My ipad is displaying the carrier settings update box but will not respond when I press "update" or "not now". I have tried to switch the ipad off, but cannot "slide to shut down" as I need to clear the carrier settings box first!! HELP PLEASE!!!!

    Have you tried a reboot? Hold down the power and home buttons simultaneously. Ignore the Slide to Power Off prompt if it pops up. The display should go dark, and the Apple logo should appear as it begins a reboot. This is a soft reboot - it does not erase data.

  • Trying to download latest operating system update for iPhone4. Received error 2001 and now iPhone 4 will not respond. Is there a fix?

    Trying to download latest operating system update for iPhone 4. Received error 2001 and now iPhone will not respond. Can anybody suggest a fix?

    tried restoring?

Maybe you are looking for

  • The app store says i have Angry birds but do not, how do i get read of it?

    This is not my email, how do i get read of this app?

  • Upload of AUC through AS91

    Dear All, we are uploading the asset master data through the T.code AS91, there is no problem. But while uploading Asset under constuction through AS91 , it is aking capitalisation date. we check the screen layout rule for asset master data it is rig

  • Difference between noise margin and noisy line

    Hi This issue has always bugged me. Am transferring to BT Infinity next week from Sky and have mixed feelings. We live a fair way from the exchange so line attenuation is a problem but we mange to get 3.5-4Mb with absolutely zero outage using the Sky

  • Problem while creating assets using BAPI

    Use table enhancement BAPI_TE_ANLU Diagnosis :The BAPIs for creating and changing assets currently support only those customer enhancements that relate to the user fields created using SAP enhancement AIST0002. Can anybody give the appropriate soluti

  • My subscription is not renewing

    My subscription is not renewing. It says it will renew on 25th.but still nothing I'm not not being able to make calls.  Thanks.