IPad 2 does not find or pair with Apple bluetooth keyboard - waiting -

When I turn bluetooth on on the iPad 2 it keeps searching with the words 'Searching' and 'Now Discoverable' as it searches. the A1314 keyboard is on and is the same keyboard I use for my MacBook Pro, which it pairs perfectly with. The iPad simply never stops searching and never connects or offers connection. The keyboard is turned on and batteries are good and also it works every day with the MacBook Pro.
Any ideas for a solution?
TIA,
Ken

David.Austin.Allen wrote:
According to the keyboards user guide, the keyboard is discoverable when the indicator light is flashing. Are you trying to pair the two while both are discoverable?
Try resetting the iPad before trying to pair with the BT keyboard. Press and hold simultaneously the Home and Power buttons for 10+ seconds, ignoring the power off slider, until the Apple logo appears.
Dah•veed
I did all of that but not sure that any of it did as much as simply turning off the computer to make sure that the keyboard was not being used by it. I now find that I could have turned off the bluetooth on the computer or made the keyboard 'unselected' by bluetooth to allow the keyboard to be free to be selected and paired by the iPad.
Thanks for you help on this.
Ken

Similar Messages

  • HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    hi
    could you tell us what the other app is please

  • Hi I am unsuccessful in pairing my iPad 3 with my friend'sGT 19070 phone.  Her phone says we are paired but my iPad does not see the pair; it says it is unsupported.  Any suggestions?

    Hi I am unsuccessful in pairing my iPad 3 with my friend'sGT 19070 phone.  Her phone says we are paired but my iPad does not see the pair; it says it is unsupported.  Any suggestions?

    The iPad message is correct, it is unsupported. You cannot pair your iPad with your friends phone. Bluetooth on the iPad is designed for the use of headphones, keyboards, speakers and some peer to peer gaming.

  • Ipad does not find printer

    I have new Epson printer with airprint possibility. Printer is on wifi and iphone can see it and print files. but ipad does not find printer at all?

    Apple has some troubleshooting tips at the bottom of this page that may help:
    http://support.apple.com/kb/HT4356
    Regards.

  • My ipad does not find my micro sim card? Whats wrong?

    my ipad does not find my micro sim card. Whats wrong

    Where did you get the phone? If it was hacked or jailbroken prior to the update, this is pretty typical. If that's the case, it's now a brick.

  • I m coming from linux platform ... now need my g   to work with vim ... how to install g   which supports C  0x ... why does  not it has repository with apple ... its so easy rather than going to UI ...

    i m coming from linux platform ... now need my g   to work with vim ... how to install g   which supports C  0x ... why does  not it has repository with apple ... its so easy rather than going to UI ...

    tom i have been using ubuntu for c++ project
    i use lambda and atomic (c++0x) but now as I am working on MAC not able to use them
    installed xcode(4.3) and changed compiler settings to LLVM3.1 but still both features are not available
    to compile wanted to have g++ which supports c++0x features ...
    new to MAC (2-3 days) so was in rush to solution
    let me know if you have some suggestion ...
    else will try with eclipse cdt .... 

  • I paired my apple Bluetooth keyboard with my iPad but when trying to connect back to iMac it shows paired but I cannot connect to it

    I paired my apple Bluetooth keyboard with my iPad.  Now I paired it with my iMac it shows paired but I cannot connect to it?

    Hello:
    Try this on your iPad:
    Unpairing a Bluetooth accessory
    If you've paired iPad with an accessory that you no longer wish to use, you can unpair the accessory.
    From the Home screen choose Settings > General > Bluetooth. If Bluetooth isn't on, turn it on.
    Choose the accessory and tap Unpair.
    Barry

  • My ipad does not wanna work i bought a new keyboard magnets can it be the problem the magnets, my ipad does not wanna work i bought a new keyboard magnets can it be the problem the magnets

    my ipad does not wanna work i bought a new keyboard magnets can it be the problem the magnets, my ipad does not wanna work i bought a new keyboard magnets can it be the problem the magnets.  it was still working just before i test the magnet case
    i allready try restart and nothing and in try to connect to itunes it does not pick up my ipad what can i do

    How are you resetting the device? I presume you're doing something like this?
    Press and hold the Sleep/Wake button (on the top of the ipad) and Home button together for at least ten seconds until the Apple logo appears.
    What happens after the device resets? Does the Apple logo appear to be replaced by the home screen? Does the iPad respond to any of the buttons or the screen at all?
    tt2

  • Why won't my new mac mini pair with my bluetooth keyboard or mouse

    I bought a new mini in December. I've been fighting with getting it set up since. It refuses to see/pair with my bluetooth keyboard or mouse. How am I supposed to proceed with setup if I can't even get off the start-up screen???
    1.4GHz
    1.4GHz dual-core Intel Core i5 (Turbo Boost up to 2.7GHz) with 3MB on-chip shared L3 cache

    The Bluetooth devices were probably paired with another computer. You need to "unpair" these Bluetooth devices before pairing with another.
    Try reading this:
    http://davemeehan.com/technology/how-to-reset-an-apple-wireless-bluetooth-keyboa rd-mouse-or-trackpad
    Good luck...

  • Iphone and ipad does not find the airprint printer

    After I upgraded my iphone and ipad I lost my airprint function. Ipad and Iphone does not find the airprinter. The printer is a HP Photosmart 5520, and it does work wireless with my Windows PC that is on the same nettwork.

    In our case the Airprint printers could not be found after IOS upgraded to 7.1.2, all was fine before then.  I have scoured the forums and many people have suffered the same problem.  All the solutions given are aimed at a domestic network with just a Wireless router.  They all involve restarting all the devices and rejoining the IOS devices to the wireless network.  Some people have had to do it multiple times before they regained use of the printers.
    In my case none of these work because I am talking about a business network with two wireless access points, several switches and a router.  To prove it is the IPads I have installed Bonjour onto a Windows PC (Bonjour is the technology used by Airprint).  This finds the printers perfectly so it is definitely something that was changed in the version of Bonjour on the IOS 7.1.2 that is causing all the problems.
    I was hoping that Apple would release another upgrade to IOS to fix this problem but it has been several weeks so far and nothing has emerged.
    So something that worked perfectly a few weeks ago is now dead in the water because of an update on the IPads!!!!!!!!

  • IPad does not find iphone hotspot

    I have iPhone 4S and an  iPad2 WiFi both running iOS5.1
    I use the iPhone hotspot function to get the iPad on the internett when not at home. This workes great, I had to type inn the WiFi password the first time i connected the iPad, later the iPad connects without having to type the password.
    Since iOS 5.1 the iPad sometimes have problems finding the iPhone hotspot. I turn on the "shared internet" function of the iPhone, open the smartcover on the iPad, but it does not connect (the two attached rings does not appear). If I go to Settings>WiFi on the iPad, the iPhone WiFi hotspot does not show up, the iPad just keeps searching. Then after a little while, the iPad suddently connect, ususally after I open Safari or Mail or something on the iPad. If I then close the smartcover, and leave the iPhone hotspot on, reopen the iPad smart cover, again the iPad does not seem to find the WiFi hotspot. I have to turn the hotspot function off/on on the iPhone, and then after a little while it works. When first connected,everything works OK.
    Is this a problem with iOS 5.1?

    Just going to the hotspot screen on the iPhone puts it in host mode where it's easy for the iPad to find it.
    You lose some speed due to bandwidth bottleneck of Bluetooth, but I found bluetooth tethering had fewer headaches and was more persistent.

  • I activated my ipad, used iCloud & Find my iphone with Apple ID named: A@.... But now I've changed address of Apple ID from A@... to the new one: B@... Which Apple ID will be asked to re-activate 7.0.4 ipad - A or B?

    Hello everybody!
    I'm using ipad mini and the iOS is 7.0.4. I used an Apple ID (called: A), and I activated my ipad, used iCloud & Find my iphone with this A account. But now I've changed address of Apple ID from A@.... to the new one: B@.... (just changed email address of Apple ID, not create a new ID), and then I signed out iCloud, old Apple ID, etc... on my ipad and signed in with new id B@.... Everythings seem OK, I can sign in/out iCould, turn on/turn off Find my iphone as well with the new one (B@...)
    But I still have a question (and still confusing with it): What will happend when I restored my ipad? I mean my iOS is 7, so which Apple ID will be asked to re-activate my ipad after I restore it, old id A@.... (this one cannot be used now) or the new one B@...., please?
    Thank you very much for your helpful informations!

    If you've succesfully changed the ID for iCloud and Find my phone, it will be your new ID you use if you need to restore it.

  • HT4111 Does anyone know how I can restore spell correct, auto correct and auto cap which was lost when I paired my Apple Bluetooth keyboard with my iPAD3?

    Lost AUTO CORRECT, AUTO CAP and SPELLING CHECK after connecting my Apple Bluetooth keyboard to my iPAD3, updated to iOS 6.1.3, didn't I?. The lost features are in the on  position in settings, aren't they? Anybody out there with a remedy?

    Read this ASC discussion that I found by using Google. I don't know if you have seen and if you haven't, it's worth a look.
    https://discussions.apple.com/thread/4683321?start=0&tstart=0

  • Mac Mini 2014 with Apple bluetooth keyboard and Magic Mouse

    Hi all,
    I'm currently in the process of moving from my old MacBook to a Mac Mini 2014 and I have a couple of questions regarding functionality of the Apple bluetooth keyboard and Magic Mouse with the Mac Mini.
    As these are the only keyboard and mouse I have available to me as I currently only have the one computer in the house, I'm wondering how I will pair them with my new Mac Mini (arriving next week for Christmas) without a wired user input device (keyboard or mouse). When I paired them with my MacBook, I of course had its trackpad and keyboard to navigate through the various steps, but as the Mac Mini does not have these, how does the pairing process work? Will I have to get my hands on a wired mouse/keyboard? I'm asking in advance because I need to get my new system up and running to start work on 27th December and so I need to know if I should pick up a cheap wired mouse/keyboard in advance.
    My second question relates to the Mac Mini, Apple bluetooth keyboard and Boot Camp. Usually, when I want to boot into Windows on my MacBook, I hold down the Option/Alt key on my MacBook's built-in keyboard to be given the choice of operating systems. Sometimes when I do this using the bluetooth keyboard, it hasn't paired in time and it boots straight into OS X, so I have to wait until that has booted, shut down and then try again. Clearly, this might be a problem on a Mac Mini if I have urgent work I need to complete in Windows, so rebooting over and over until my keyboard finally pairs in time isn't desirable. Any tips here would be greatly appreciated!
    Thanks in advance for your help!

    If you unpair your BT KB and mouse from the old computer they should pair during the initial setup of the Mini. However, sometimes they donot a wired KB and mouse is required. You can use any USB PC KB and mouse.
    Once you get the BT KB to work you can use the Option key on the BT KB while booting to get your choice of OS to boot into.

  • My ipad mini does not find my Nokia bh-111 Bluetooth headset, yet all other devices do and pair without issue

    I use my bh-111 with my windows phone, my laptop and my wife's android jellybean phone without issue but the ipad mini will not find it, any ideas?

    Hello Jamessm,
    I would try the troubleshooting steps in the following article about Bluetooth and iOS devices.
    iOS: Third-party Bluetooth headsets, headphones, and keyboards
    http://support.apple.com/kb/ht1664
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for

  • How Do I Move A Table in DW8?

    In DW8 I want to be able to move tables around. Currently I'm drawing them on layers, then moving the layers around, but a layer position in DW is different when you preview in browser whereas tables seem to be the same. This makes designing a lot of

  • BAPI : TO SEARCH BAPI MAPS TO THE GIVEN SCREENS

    Hai friend yes... its CIF he also said the same .... He asked me to look the BAPI for CIF SEARCHA and CIF CREATION.... please give ur mail id i will forward the scanned screen shots given by them... please help... Iam very New to BAPI.. so iam worryi

  • XML Element Byte Offset - Help!

    Hello. I have an xml file of the format: <TAG> <SUB> <DATA>DDDD</DATA> <DATA>DDDD</DATA> </SUB> <SUB> <DATA>DDDD</DATA> <DATA>DDDD</DATA> </SUB> </TAG> I need to find the byte offset for each <SUB> tag. Any suggestions?

  • Help fixing a huge windowserver_last.log file

    While using Omni Disk Sweeper, I discovered that my windowserver_last.log file is in excess of 8GB in size. I'm not very unix command savvy, but I am trying to reclaim the space without wiping something important. I'm unable to open the file using co

  • Struts support in portal

    When is portal going to properly support Struts based applications? Jdev 903 has support for Strust (well sort of it's somewhere between Strust 1.0 and 1.1) - thanks Jdev team! but Portal in 9iAS 902 does not support struts apps at all! One can deplo