IPad 2 front and back camera is not work after update iOS 7.0.4 it gives like the resolution is not adjusted

After updating my ipad 2 to iOS 7.0.4 , front and back camera is not working it gives like very small dots or dash. I did restore from iTunes and reset by holding on the home and sleep button, I also tried to close the app from the task bar but still all trials didn't solve the problem.

I haven't heard of this before so I doubt it's a bug. Probably something happened during the 7.04 download.
Backup your iPhone to iTunes and restore it as a new iphone, then restore from the backup. This will give you a fresh copy of iOS 7.04.

Similar Messages

  • IPhone 5 with ipodcable/30pins adapter not working after update IOS 7

    iPhone 5 with ipodcable/30pins adapter not working after update IOS 7. The car radio is not responding when I connect the iPhone. iPhone 4s with IOS7 without the 30 pin adapter is working. So I think that the 30 pin adapter is the problem.

    No no dear this is not my problem
    My problem that i mean i say when i on my
    Cellural data my gprs not working and not work my internet

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • My front and back camera won't work, and my flash will not either.

    I took some picture in the rain, my iPod 5th gen wasn't affected, then my iPod was dropped in a parking lot and found later. Other than that, nothing has really happened to it, but both the front and back camera do not work. When I open up a camera, it's just black. The flash doesn't work either. Can anyone help me?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar
    Unless you purchased the optional AppleCare+ extended warranty,
    Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 4Gs. They do not fix yours.
      Apple - iPod Repair price             

  • What do i do if my iphone 4 front and back camera doesn't work

    what do i do if my iphone 4 front and back camera doesn't work

    gordonw26 wrote:
    Do you have a crack in the screen
    What does this have to do with the camera not working?

  • My mail icon is not working after update ios 6.1.1 ????

    dear sir please give me soluction.
    my mail icon is not working after update of ios 6.1.1

    You can only purchase apps and other media for the county's sore in which yu are located. You account, included payment method, also must be associated with that country.
    Sam applies for updating apps. Note that not all apps are available in all country so y will not be able to update an app if you are in another country and that app is not available in that country or your account is not associated with that country.
    You can change the country and other things by:
    iOS: Changing the signed-in iTunes Store Apple ID account

  • I need help.. My front and back camera suddenly stop working.

    Few days ago, my front and back cmaera stop working. I tried all the possible options but still having the same problems.

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    * No data is lost due to a reset

  • Apple av adapter does not work after updating ios 5,01

    apple av adapter does not work after ios 5,01. no video on vga monitor. sound goes out on iphone 4 also.

    Thank you for your interest. Last night i tried again. It worked. there is still problem, so i could find out it that monitor is going to power saving mode then voice goes out and no view on monitor. I changed the power saving settings. And worked well. Thnx again.

  • Volume button not working after update ios..

    My iphone 4s volume down button not working after i upgrade to ios 6.0...and then i update to ios 6.0.1 its still not working...plz help...what happen...???

    Settings > Sounds > Change with Buttons... Make sure this is set to ON.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If none of the above resolves the issue, take the device to Apple for evaluation or possible replacement.

  • Torch won't turn off and back camera won't work after dropping it in a pool. What can I do?

    I put it in rice as soon as I got back, and left it for 36 hours as instructed by a website and friends. Ever since dropping it the torch hasn't turned off and the bac camera won't work.

    Water and electronics do not mix well.  Your device may not ever work properly again, and probably needs to be replaced.  Unless you have the AppleCare Protection Plan Plus, then it will cost $199 USD to replace an iPhone 4S.
    The rice trick works best if you leave it for at least 4-5 days, not 1.5 days.  But even that is no guarantee.

  • Wifi not working after updating iOS 8.2 on I phone

    been facing since updated new ios 8.2 wifi connected but unable to use Internet when I disconnect wifi and connect again so it works for very
    short time please help me I have tried everything resetting network resetting I phone off locatin service renew licence but not working

    Good Afternoon Smsf,
    It sounds like you may have tried some, but not all of the steps for troubleshooting your Wi-Fi connection with the iPhone.  I'm curious to know if the issue is happening just in one location (home or work), or if you've tried to get on the internet from a different wireless network.
    Give these steps a try in the order given, and let us know if the issue persists.
    If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
    https://support.apple.com/en-us/HT204051
    Regards,
    - Judy

  • IMessage not working after updating iOS 6.1

    My 4s is not working with my wife's iPhone in iMessage after update.My wife's is not working either.Ive tried turning cellular off and on,been through the settings etc.whats the story with this bug?

    I think I have fixed the problem. I tried resetting, etc. I also tried turning off iMessage and then reactivating. it would work for a short time and then lose it.
    I noticed that I could not iMessage to my personal email address, which is set up in iCloud. When I tried, the Send button stayed grayed out.
    So I edited my contact record, changing the order of two email addresses in the contact record. I had an email address custom labeled iPhone email, and that one was first in my contact record. I changed the order first, making my home (primary) email address the first email in the record. Then, I reentered my phone email address as the last email in the record, and relabeled the phone email address label to read phone emai. Voila! I got a lovely blue talk bubble next to my home/personal email address (the one that is set up with iMessage). Morevoer, I could then direct an iMessage to it. It now syncs my conversations on all devices (iMac, iPhone, iPad 2).
    FWIW, iPad is still running iOS 6.0, but if this fix holds, I will update that later today.

  • Video streeming not working after update ios 6.0.1

    Hello,
    today i have updated my phone 4S from 5.1.1 to 6.0.1 , I have web based tv on my network. which i was easily able to see when i was in 5.1.1 . when i go to play tv from safari its goes stuck and loding and loading . i have attached image.
    now its very big problem for me. can anyone please help me with this ? its really need for me.
    best

    I couldn't use my iphone. it's not working. not restoring

  • IPod touch 3G displays white skin not working after update iOS 4

    During update ios 5  my iPod touch displays white blank skin and not working at all. How can I solve this problem.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Firefox does not work after update, all troubleshooting has been completed. Nothing can be clicked, not even the options in firefox.

    I am unable to use firefox after the latest update. All troubleshooting methods listed on the website has been tried. I am unable to click anything in the firefox, tabs don't work, options don't work, unable to launch diagnotics, help or anything from firefox. Basically, I am unable to access anything within firefox.

    Did you try a new profile?
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 23: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Maybe you are looking for

  • MSI 975X PROBLEM WITH INSTALLATION ON WINDOWS VISTA

    I have MB MSI-975X PLATINUM v.1 withbios ver 1.3,processor Pentium D940 (3,2GHz/800/2x2MB),2X512MB DDR-2 667MHz,in the beginning when I start the installation on WINDOWS VISTA  the computer is bloked od it is restart.This problem I solved when I put

  • Mini Dvi to HDMI to LCD in windows 7

    I have a macbook (2008, 2.1 C2D, intel 965 GMA) and i use a mini dvi - hdmi adapter to connect to my sanyo lcd, which is basically a plug and play process under snow leopard. However, say i want to use windows 7 to play a game through the tv - fail.

  • Workflow for P.O release process.

    Hi Guys, As per the one of the thread I have done setting as per the below. Ref last 10 line for the details of the problem. Hi, 1) Work flow: - Work flow is standard functionality of SAP. I give one example to u. In the case of purchase order creati

  • Custom theme

    I created an custom theme using TinyLaF 1.2 tool, when I save that theme it is saved with .theme extension. Can any one help me how can I use this theme in my java application.

  • Hp pavilion dv7-1451nr caps and number flashing once. Black screen

    HP Pavilion dv7-1451nr: caps and number flashing once. Black screen. I took out top memory card then laptop booted. Shut off and booted about 5 times no problem. Shut off overnight. Now same problem reoccurred. Thanks for any advice, Stan