IPad 2 hangs up while trying to upgrade to iOS8

I'm trying to upgrade the OS on my iPad 2. The installer seems to have hung up with less than 1/8" left in the progress bar. It has been that way for about an hour. I'm not sure what to do from here. Any suggestions?

I Have suggested this to some other users in your situation and it has worked for them, so you might want to give it a try. Reset your iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple Logo appears on the screen. Then let go of the buttons. See if that kick starts the download again.

Similar Messages

Getting error message on iPad(3) & iPhone (5) while trying to upgrade to iOS 7

Love to know why this is failing

The entire planet Earth is trying to download the same thing at the same time.
Give it some time.

IPhone 4S stuck in recovery mode while trying to upgrade to iOS 7.0.4

I ran into the issues with my iPhone 4S while trying to upgrade it it iOS 7.0.4 OTA and I have tried everything I can to recover it but no luck. I have tried different USB ports, different PCs altogether with av tuned off, and finally a MAC Pro this morning. I am stuck and miserable. I did everything that a number of forums have mentioned in terms of switching off anti-virus, clearing off host files, checking windows and mac firewall settings, setting the phone to DFU mode and trying over - you name it.
The error I run into most half way through the upgrade is "Unknown Error (29)". According to Apple (http://support.apple.com/kb/TS3694), it has to do with anti-virus but last night I spent 2 hours building an image with no av or firewall running and tried and still ran into the error. Even tried "Fix it" from Microsoft to clear off the host file configurations as prescribed.
Any help is welcome. Much needed.

Hi, sorry for my late reply.
FIXED!!!! For me anyway, and I hope for you!
So I tried to update to ios 7 and after downloading the software itunes tried to update my iPad 3. I recieved the error 3004 and was stuck in the "Connect to iTunes" screen and
could not get out of it. Completely annoyed!
But then I remembered something from when I used to fiddle with iphones. I opened a program I had called TinyUmbrella, which can be used to force boot out of recovery mode (the
"connect to itunes" screen).
My ipad was still connected to itunes and in recovery mode. I opened TinyUmbrella, selected my ipad (which was just shown by the serial number), then clicked "Exit Recovery" and
BAM!!! It immediately kicked my out of the recovery screen and started my ipad back up to my home screen.
Now, my ipad was still on 6.1.3 since the update to ios 7 had failed. But I didn't care, my ipad was fully functional again just like I left it before. Thank God for
TinyUmbrella! Here's the CNET link for TinyUmbrella if you need it:
http://download.cnet.com/TinyUmbrella/3000-18545_4-75766724.html

What do I do now that Photoshop CC has encountered an error while trying to upgrade. Suggesting retry does nothing. The numbers (49) appear, but I don't know what that signifies. Help?

What do I do now that Photoshop CC has encountered an error while trying to upgrade. Suggesting retry does nothing. The numbers (49) appear, but I don’t know what that signifies. Help?
It is recommended that I ask for help, which put me here. What I really need is some customer service — not a chat room!

If Windows :
Quit Creative Cloud desktop application .
Launch Photoshop cc 2014 application from C: > Program Files > Adobe Photoshop CC 2014 .
Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
It should update.
If Mac:
Quit Creative Cloud desktop application .
Launch Photoshop cc 2014 application from Applications folder:
Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
Let me know if you face any error .
Error 49 occurs while updating the application , when Creative Cloud app does not have reference / Access to installed CC app, so that it can apply updates for the same .
You can try to update from CC app like Photoshop itself and check.

Hi i don't no if anyone can help me, i have a ipad 1 and have been trying to upgrade it to the latest version and cant find anywhere to do so? on my phone it is in the settings to upgrade, iv been online and looked but cant find any link.

Hi i don't no if anyone can help me, i have a ipad 1 and have been trying to upgrade it to the latest version and cant find anywhere. on my phone it is in the settings to upgrade, iv been online and looked but cant find any link. can someone send me a link or direct me the right way many thanks.

Upgrading the iOS "over-the-air" was introduced with iOS 5. If you are currently running an iOS version < 5.0 you can only update through iTunes. Connect your iPad to your PC or Mac. Open iTunes and click on "Check for updates"

IPad Music app crashes while trying to choose my shared Mac music library

IPad Music app crashes while trying to choose my shared Mac music library. Only a few of the artists show up and if I try a search, the App crashes.

Thanks. This got all of the artists to show up but the music app still crashes when I search the shared music library.

Hung up with my Quicken while trying to upgrade to Maverick

While trying to upgrade to Maveric we ran into a snag. It seems that my Quicken 2007 is not compatable with the new operating system. This is a show stopper since we use it to balance several checking accounts and keep tabs on savings and other accounts. Balancing the check book it's its primary function and we do not need to pay bills, track investments, or perform other acts of high science.
Quicken has a very clever way of not having to deal with it's customers. When you call in for help you must have an incodent number, but if you can't speak to anyone how would you come buy such a number. Anyway it is clear that they are not the least bit interested in supporting anyone with a Mac. Reviews of there new software demonstrate that. They do have some software that would upgrade my Quicken to work with the new OS, but I have yet to discover how you can contact some one to order it. So now it it time to find some new software.
It needs to:
Open or import the current Quicken Files (from Quicken 2007)
Work with our current IOS OSX 10.6.8
Work well with Maverick
Balance several checking accounts
Provide reports of tax related information.
Reside on the computer and not have my information floating around in some cloud somewhere.
You would think that there would be an abundance of software out there that would meet this criteria. However when I find something that looks like it might work it either has very poor reviews or there is not enough information for me to determinf if it will work.
I have been very impressed with the information I have recieved from this forum so once again I shall go to the well. Any assistance would be appreciated.
Have a great day !!!

jimfromkeyport wrote:
Please don't misunderstand, I appreciate all who chimed in on this discussion. I some how missed the reference to facetious, but I am not sure that was germain to the issue.
Follow with me here:
jimfromkeyport wrote:
Yep! That would be a great solution, however seeing it and trying to successfully order it are two different things!
If you have a source where I can order the software I would welcome that!
MlchaelLAX wrote:
Perhaps Keyport is not in the United States?
I repeat:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
I had already given you the link to purchase the downloaded version from Intuit. Since that link was offered by Intuit in February, 2012, you are the first person to suggest that it does not work for you. I facetiously suggested that you were not in the United States and obtained a somewhat snarky geography lesson...
jimfromkeyport wrote:
One other question, just what does "Level 4' mean?
Thanks for trying !
I do not know; I just continue to try to help and sometimes the OP (Original Poster, in this case YOU) acknowledges that help and/or claim responses are their solutions. Both responses from an OP awards points to those recipients. As points accumulate, members acquire a higher Level status, which grants certain privileges not awarded to holders of lower levels. Personally I just mostly ignore it!
As Woody Allen might have said: "I am only in it for the eggs!"

TS3694 I am getting "An unknown error has occurred (3014)" on my iPad2 while trying to upgrade to iOS6. What do I need to do to fix this?

I am getting "An unknown error has occurred (3014)" on my iPad2 while trying to upgrade to iOS6. What do I need to do to fix this?

Hi apiccolo5,
Thanks for visiting Apple Support Communities.
See these articles for steps that can help you resolve the issue you're seeing:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Best,
Jeremy

Error-19 while trying to upgrade to v.7.4.1

In Airport Utility, when trying to upgrade to the 7.4.1 firmware (from 7.3.2), I keep getting an Error-19 message: *An error occurred while reading the configuration*. Make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again (-19)".
This is despite that it is in range and it is connected and working properly. I have not tried with a direct (wired) Ethernet connection. But after reading the many problems with v.7.4.1, I'm not sure I want to update to this version. Now, everytime I turn on the MBP or switch user accounts, the Airport Utility turns on and I get an an annoying message that there is a problem with my base station requiring the update. The green status light on the on-screen advisory has now turned to amber. Working off an Airport Extreme/ 1Tb TC.
Any clues to returning to a green status light display in my Airport Utility dialogue box?

I had the same problem, ended up just resetting the cable modem and Airport by unplugging both and letting them boot up again. The green light is back and it is still running with the old firmware.

Error while trying to upgrade ODI repository using export/ import

Hi,
I am getting below error while trying to import an ODI project from dev environment into my QA environment which has an older version of project.
com.sunopsis.core.SnpsNotConsistentSynonymImport: ODI-10013: This import action has been cancelled because it could damage your repository. This is due to an SNP_COL object that has object identifier 13712007 that is greater than that for the current SNP_COL id sequence. Importing this object would lead to primary key violations in the future.
at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java:6041)
at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java:5781)
at com.sunopsis.repository.manager.RepositoryManager.importObjectsUsingDoImport(RepositoryManager.java:5194)
at com.sunopsis.repository.manager.RepositoryManager.treatObjectListGeneral(RepositoryManager.java:3587)
at com.sunopsis.repository.manager.RepositoryManager.workRepositoryImport(RepositoryManager.java:4002)
at com.sunopsis.repository.manager.RepositoryManager.workRepositoryImport(RepositoryManager.java:4174)
at com.sunopsis.graphical.dialog.SnpsDialogImportWork$1.run(SnpsDialogImportWork.java:519)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:656)
at java.lang.Thread.run(Thread.java:619)
Did anyone face this error? What is causing this error? What should be done to resolve this error?
Edited by: 854415 on Oct 18, 2011 4:51 AM

Hi
Did you follow below approch
Goto Topology> File Menu>Export>Export Master Repository in ZIP format
File Menu>Export>Export Logical Topology in ZIP format
In Designer, go to File menu>Export>Export Work Repository in ZIP format
Quit from old ODI instance
Login into New ODi instance
Goto Topology> Import>Import Master Repository in ZIP format (please select INSERT and UPDATE Mode option from dropdown list)
Import>Import Logical Topology in ZIP format (please select INSERT and UPDATE Mode option from dropdown list)
In Designer Import>Import Work Repository in ZIP format (please select INSERT and UPDATE Mode option from dropdown list)
Note: Once it is done please change the Work repository ID on New ODI instance
Regards,
Phanikanth

Error while trying to upgrade SQL 2008 (SP2) to SQL 2012: There was a failure to calculate the applicability of setting LICENSEPATH.

Hi,
I am trying to upgrade one of our SQL Server Enterprise (2008 (SP2)) to 2012. I am using the upgrade option but it gives me the following error:
Error Code 0x85640002: There was a failure to calculate the applicability of setting LICENSEPATH
We have downloaded the image from our Volume Licensing account. Also, the same image was used to install SQL 2012 on Windows Server 2012 R2 servers without any issues.
Below is the install summary.txt. I have tried everywhere but no go. Would really appreciate any assistance.
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2057043966
Exit facility code:            1380
Exit error code:               2
Exit message:                  There was a failure to calculate the applicability of setting LICENSEPATH.
Start time:                    2014-02-28 10:58:49
End time:                      2014-02-28 10:58:58
Requested action:              RunRules
Exception help link:           http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x0BA02FC6%400x294A9FD9&EvtType=0x0BA02FC6%400x294A9FD9
Machine Properties:
Machine name:                  xxxxxxx
Machine processor count:       2
OS version:                    Windows Server 2008 R2
OS service pack:               Service Pack 1
OS region:                     U.A.E.
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Package properties:
Description:                   Microsoft SQL Server 2012
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
SPLevel:                       0
Installation location:         D:\x64\setup\
Installation edition:
User Input Settings:
ACTION:                        RunRules
CONFIGURATIONFILE:
ENU:                           true
FEATURES:
HELP:                          false
INDICATEPROGRESS:              false
INSTANCENAME:                  <empty>
PID:                           *****
QUIET:                         true
QUIETSIMPLE:                   false
RULES:                         GlobalRules
UIMODE:                        Normal
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140228_105848\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file:               The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingApplicabilityException
    Message:
        There was a failure to calculate the applicability of setting LICENSEPATH.
    HResult : 0x85640002
        FacilityCode : 1380 (564)
        ErrorCode : 2 (0002)
    Data:
      SettingId = LICENSEPATH
      WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingApplicabilityException@2
      DisableWatson = true
    Stack:
        at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateApplicability()
        at Microsoft.SqlServer.Configuration.BootstrapExtension.ValidateChainerSettingAction.ExecuteAction(String actionId)
        at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
        at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
    Inner exception type: Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingValueException
        Message:
                There was a failure to calculate the default value of setting LICENSEPATH.
        HResult : 0x85640001
                FacilityCode : 1380 (564)
                ErrorCode : 1 (0001)
        Data:
          SettingId = LICENSEPATH
          WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingValueException@1
        Stack:
                at Microsoft.SqlServer.Chainer.Infrastructure.Setting`1.CalculateValue()
                at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.CallQueuedSubscriberDelegates()
                at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.Publish(Publisher publisher)
                at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateApplicability()
        Inner exception type: System.ArgumentException
            Message:
                        Culture ID 3072 (0x0C00) is not a supported culture.
                        Parameter name: culture
            Stack:
                        at System.Globalization.CultureInfo..ctor(Int32 culture, Boolean useUserOverride)
                        at System.Globalization.CultureTable.GetCultures(CultureTypes types)
                        at Microsoft.SqlServer.Configuration.SetupExtension.LcidUtilities.GetLangPackParentFolderForLcid(String lcid)
                        at Microsoft.SqlServer.Configuration.SetupExtension.LcidUtilities.GetLcidFolder(ServiceContainer context, String baseFolderFullPath)
                        at Microsoft.SqlServer.Configuration.SetupExtension.LicensePathSetting.DefaultValue()
                        at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.CallFunctionWhileAutosubscribing[T](SubscriberDelegate
subscriberDelegate, Int32 priority, AutosubscribingFunctionDelegate`1 function)
                        at Microsoft.SqlServer.Chainer.Infrastructure.Setting`1.CalculateValue()
Regards,
Mohammed

Culture ID 3072 (0x0C00) is not a supported culture.
                        Parameter name: culture
This appears to be the root problem. It seems that the regional settings on this machine is messed up. 0x0C00 is an unusual LCID, they do not normally not end in two zeroes.
is there a custom culture installed on this machine?
Review the regional settings and also check the System locale. If it looks spooky, set it to Arabic - U.A.E. if this is where you are located.
Erland Sommarskog, SQL Server MVP, [email protected]

While trying to upgrade to mavericks I received the following error during download "OS 10.9 has not yet been approved for software upgrade. Thanks! -SWN IT"

Hello, I am trying to upgrade an iMac to Mavericks. At the end of the download phase, a message pops up that says
"OS 10.9 has not yet been approved for software upgrade. Thanks! - SWN IT"
The download stops, and I cannot resume. Made several attempts to start the process of downloading again and receive the same message/error.
I am not familiar with any software that has the intials SWN or have SWN in the title.
Does this error look familiar to anyone?
Any clues as to how to find out the what application could be sending this message would be greatly apprciated.

Is this on a Mac that belongs to a company or did you buy it used?

Phone crashed while trying to upgrade to 4

tried to upgrade to 4 but phone crashed after the download, now the screen has an itunes icon with a arrow poiting to it with a usb cacble under, any idae how to restore? I can only power down & power up now, that image stays the same.

I am stuck with the same problem.. I hope the folks in Cupertino, CA wake up early!

Error while trying to upgrade my iPhone, message reads "iTunes could not contact the iPhone software update server beecause your are not connected to the internet.

Hello,
I am trying to upgrade my iOS to version 5 but receive the message noted below ("iTunes could not contact the iPhone software update server because you are not connected to the internet"). I click update on iTunes. My internet works fine. Does anyone know what may be causing this error?

Try disabling firewall and virus scanning software

My iPad 2 lost its mail after I upgraded to IOS8. It crashes every time I click on mail. Yet, I can send photos and forward things in outgoing mail.

Lost my mail
after I upgraded to IOS8. It crashes every time I click on mail. Yet, I can send photos and forward things in outgoing mail. how to restore?

Answering my own question here. It's fixed! Another user recommended I switch to another wireless network then back to mine. And it worked! Mail is sending again with no problem.

IPad 2 hangs up while trying to upgrade to iOS8

Similar Messages

Maybe you are looking for