Ipad 2 has no sound, no bar, and side buttons don't work.

my sound cut out randomly yesterday and I suspected that it was on mute but it wasn't and nothing I try listening to/watching even has a volume control. It's like volume never existed in the first place.
I Reset the factory settings, had it off for 4 hours, and cleaned the ports....nothing.

Try a device reset:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

Similar Messages

  • My sound won't work on my ipad even though the sound is up and the button on the side is on volume? Any ideas ipad 2

    My sound won't work on my ipad even though the sound is up and the button at the side is on volume? Any ideas. For ipad 2

    They will replace it with a refurb of like kind if the problem is deemed to be hardware related and not caused by misue. They will probably try restoring the device and troubleshoot it on their own before they replace it for you .... And I'm talking about an Apple Store here.
    You should probably try this next.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.

  • IPad 2 Rotation, Sleep, and Volume Buttons Don't Work.

    I have an iPad 2 running 7.1.1 (11D201) and just yesterday the sleep sleep and volume buttons don't work, and the screen won't rotate at all.  I have already tried the following:
    Switched the Lock Rotation/Mute settings in General
    Power cycling it
    Held the sleep and menu button to reset it (the button worked for that at least)
    Done a network reset
    Reset All Settings and restored from backup
    Reset All Settings and restored from iCloud
    Erase All Content and Settings and restored from backup
    Erase All Content and Settings and restored from iCloud
    If anyone has any OTHER suggestions besides what I've already tried, I am all ears.  Thanks.

    Go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again.  Also, if you have IOS-7, read this.

  • My earphones mic and volume buttons don't work ever since the iOS 8.1 update! Please help me. One discussion person says they bought a new pair and THEY don't work either. What do I do? I'm about to have a breakdown!

    I rely heavily on my earphones because well... I'm lazy but they don't work. They work on my friend's iPhone who hasn't updated yet but I've updayed and the mic and volume buttons don't work. Please make a correct update!

    Nope, still same problem. I did an install, didn't work. Then I completely removed my IDT driver, restarted, installed the driver, restarted, same problem.
    When I troubleshoot my audio it always asks me which one to troubleshoot. It only works if I do one of the "Speakers / HP - IDT" but I don't know why it has so many devices listed with the same name.
    Also, after I troubleshoot and I can hear audio, if I go to "Manage audio devices" it still shows that no audio device is installed, which is why the webinars won't work.

  • Volume and brightness buttons don't work anymore

    I did a complete restore from factory DVD and since then the volume and brightness buttons don't work anymore.  I have an All-in-One AE1900.  Anybody can help me fix this problem?  Since I do not have the original keyboard anymore, I can't use the hot key combination to do it.  Thanks for your help.

    I've had this same problem, but when I am using "Parallels" to run windows programs on my new Macbook Air, with an external Mac LED Cinema Display, the brightness keys on the external apple keyboard do not work.  Sound seems to work fine.  They work fine in Mac mode. 
    Any solutions?

  • Iphone 4S - Wifi and bluetooth buttons don't work

    Wifi and bluetooth buttons don't work in my Iphone 4S. I have tried all the suggested possible solutions, but nothing seems to work. Can anybody help?

    This is the only support document there is regarding the problem. If this does not help, you would need to make an appointment at the Genius Bar. http://support.apple.com/kb/TS1559

  • My Microsoft Intellimouse back and forward buttons don't work in Firefox, but they do in IE and in Windows Explorer. It used to work, now it just stopped. Why and how can I fix this?

    Forward and back buttons don't work in Firefox but do everywhere else.

    Make sure that you set those buttons to the default action in your mouse driver software (Control Panel > Mouse or specific Intellimouse driver software).

  • My-space-bar-and-delte-button-have-stopped-working

    My-keyborad-spacebar-and-delete-button-have-stopped-working.Any-suggestions

    I don't suppose you have an external keyboard. If you do, test it. If not, try booting in safe mode (shift key down at startup.)

  • Satellite U500-1F5: eco and FN buttons don't work after BIOS update

    Hi everyone,
    I hope i can find a solution for my problems in here.
    I bought a new Toshiba Satellite U500 (PSU9ME),
    I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.
    Last week I received an alert to updat the BIOS and i did it. since then i noticed the following problems:
    1. eco utility is not working, and when i tried to uninstall it it says (BIOS unsupported)
    2. the on screen funtion buttons that appear on the top of the screen when you press the Fn button does not apear anymore
    3. the touchpad lock and unlock button does not work and even pressing Fn+F9 doesnot lock it
    I hope u can give me an answer regarding my problems,
    I already downloaded the latest updates for the eco and value added packege from toshiba site and installed them,
    BUT
    didnt solve any of my prob
    still eco utility is not working. The msg (unsupported BIOS), appear when i run the update.
    The function buttons bar on the top of the screen not working ( even after i uninstall the toshiba value package and re-install the latest one) and the touch back lock/unlock button also is not working.
    I hope Toshiba can find me a solution, coz I dont have the time to go the service center
    Model U500-1F5 PSU9ME00D00XAR
    Windows 7 (64)
    Thanx in advance

    Hello
    At first just one comment:
    *I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.*
    Thats nice but definitely not necessary. When the system runs well, don't touch or change anything. Maybe sounds stupid now but I recommend you to remove TEMPRO from the system. Believe me you don't need it. I have 2 years old Satellite A300 and still original BIOS. It runs perfectly and I don't want to make risk and change anything. Since last month I have Satellite U500-1EX and will do the same. Tempro is already removed and I am happy with factory settings.
    All you have done is OK but at least you can try to reinstall whole OS now using HDD recovery option (F8 at start-up) to see if everything will works well again. sorry but if this will not help I think you need BIOS downgrade to old version.

  • "Archive" and "View" buttons don't work after folio update

    Hi all,
    I have a subscription to the professional edition and I have built a custom viewer app for Android. I have built about 10 folios and at first download all is ok, the folios are displayed without problems and the app works fine except for one issue: "Archive" button don't work, when I tap on it, near folio cover, nothing happens, the folio does not disappear from folios list.
    But the serious problem occurs when I perform a folio update from Folio Producer ('Update content' from adobe dashboard DPS): both "Archive" and "View" buttons stop working, nothig happens when I tap tap on them and I am forced to uninstall and reinstall the application on tablet (.apk file) to see folio changes in my custom viewer.
    This is very annoying as well as time expensive.
    Tablet is Samsun Galaxy Tab SII with Android 3.2.
    Any help is appreciated.

    To the best of my knowledge, the SII is a smartphone and not a tablet device, and the official claim is (correct me if I'm wrong) that DPS on Android is corrently tablet only.
    Anyway, it seems strange to me so checked and found out that even though the DPS apps are not available when you search for them in the Play Market of a smartphone you can still force load them to the phone and run them.
    I've done it on both a Samsung SIII running Android 4.0.4 and a Samsung GT-I9070 running Android 2.3.6 (I currently don't have a device running Android 3.2)
    The interface is so small that it's hardly possible to use it, but it works.

  • MSI GX620 the turbo and eco buttons don't work

    Hi Guys!
    The eco and turbo buttons don't want to work anymore.When this problem appeared,I have had an other.When I push the button of camera, wireless or bluetuth,it dosen't appear a sign in the right corner of the monitor...I have windows Vista.What should I do?Should I reinstall the system?
    Thank you for the answer in advanced...

    You removed SCM from your system, install it again.

  • Satellite U400: Need Vista install order and Control buttons don't work

    I bought an Satellite U400-11T model with french windows Vista.
    I want to change the french Vista to hungarian Vista.
    Of course I bought a legal vista HUN and downloaded the drivers etc.
    I am interrested in about the install order called installation instruction like at the XP models.
    My second problem is; I have already installed the new Vista HUN and the 6 easy key touch buttons don't work anymore.
    Where can I switch on it or wich program must i reinstall?
    Thanks
    Schmid

    Hi
    The installations order for Satellite U400 should be as follow:
    Windows Vista SP1
    Intel(R) Chipset Module
    Intel(R) Robson(Intel iMSM Driver)
    Intel(R) Crestline-GM / UMA Driver or AMD M82XT /M86 Driver V8.452.2
    Conexant CX20561 Audio Driver
    Marvell 8040/8055 LAN Driver
    Synaptics Touch Pad Driver
    Alps Touch Pad Driver
    Conexant Modem Driver
    Netwaiting
    Modem Region Select Utility
    Wireless LAN Driver
    Chicony Camera Software
    Bluetooth Stack for Windows by Toshiba
    CIR Port Driver V7.1.62.2012
    TOSHIBA Value Added Package
    TOSHIBA Hardware Setup Utility
    TOSHIBA Supervisor Password
    TOSHIBA SD Memory Utilities
    Authentec AES1610 Fingerprint Utility
    TOSHIBA ConfigFree
    TOSHIBA WPS Library
    TOSHIBA Assist
    TOSHIBA Speech System
    TOSHIBA Extended Tiles for Windows Mobility Center
    TOSHIBA Remote Control Manager
    CD/DVD Drive Acoustic Silencer V2.02.00
    Toshiba HDD Protection
    TOSHIBA Face Recognition
    TOSHIBA TRS Driver
    Broadcom
    HDMI Control Manager
    Please do not ask me about single tools. Install all offered stuff following this list and I hope everything will work well.
    Bye

  • Scroll bar, back/forward buttons and home buttons don't work

    I use Windows 7 and Firefox 6.0.1. The navigation buttons don't respond to mouseover and work only if the menu bar is selected.
    I don't want the menu bar because it reduces screen space. How can I get those buttons to work without the menu bar?

    Sounds like you have a corrupt '''places.sqlite''' file or corrupt '''localstore.rdf'''. Please see these articles which explain how to resolve the problem:<br><br>
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox<br><br>
    * http://kb.mozillazine.org/Corrupt_localstore.rdf<br><br>
    If this answers your question, please click the '''Solved it''' button next to this post after you log in into the forum. This will help others searching for a solution to the same subject.
    Thanks.

  • Spamming has made app reviews pointless and report button no longer works

    The app reviews have become useless to me because of all of the spamming.  And to make matters worse, the report button no longer works so the spamming posts can't be reported.  Who do we contact to report spam?

    My guess is that you have a scope problem. By putting the button inside a movieclip you have made the buttons scope the same as that clip.
    So if you add a trace inside the release event handler, what do you get?
    trace("My current scope is: "+this);
    I'm guessing it is "_level0.mc_anim_backdrops_menu," right?
    So since you are using the global function of gotoAndPlay() it is looking for that label in the current timeline and not finding it.
    You should probably use the MovieClip method and specifiy which timeline it should look in.
    _root.gotoAndPlay("Why");
    _level0.gotoAndPlay("Why")
    _parent.gotoAndPlay("Why");
    both would probably work. I would never use the first two, other than to make sure that there wasn't something else going on...

  • X230t and Windows 8 - tablet rotate and control buttons don't work

    I am the proud owner of a new x230 tablet and I couldn't resist the tempation to load up Windows 8 on it.  Overall I have found the operating system to work fairly well on the system as installed "out of the box"; however, I have noticed that when the computer is put in tablet mode the screen doesn't rotate, even if the rotate hardware button is pressed.  Has anyone else encountered this and if so is there a solution other then waiting for the official release of the operating system and windows 8 certified drivers.
    Thanks

    This is for win7 but should also work in win8 because it is a simple configuration thing:
    http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/how-torotate-screen-in-windows-7-...
    similar:
    http://answers.yahoo.com/question/index?qid=20070808054356AAufqKb
    Using x230t (i5-3320M, 8GB RAM, 256GB SSD, 80GB mSata-SSD) and loving it!
    "I may not own the world but I own my mind and therefore the world is at my feets." (me)

Maybe you are looking for

  • Safari and Firefox not loading pages

    Safari and Firefox are now selectively not loading certain pages. Sites like penny-arcade.com and staffingnow.com give me a ... Safari can't connect to the server. Safari can't open the page "http://www.staffingnow.com/" because it could not connect

  • LaserJet P2055DN - will not print via network

    Set up the printer last night as a network printer (replacing an older LJ 2300dn). It would not print a test page. To verify that the printer was good, I loaded the drivers into my laptop and connected via usb.  Was able to print a test page via usb.

  • Remove Child and Event.SOUND_COMPLETE not working inside movie clip. What's the problem?

    I have a movie clip that is called to the stage. The user then clicks a button and music plays. As the music starts, another movie clip is called, a simulation of  an equilizer. There are several things that should happen: 1) When the user closes the

  • Https pdf links won't open in IE8

    https pdf links won't open in IE8 but do in Firefox.

  • Should I place a weblogic server outside my firewall?

    I am looking at setting up an app server running an HR application. I want employees to be able to access it from home and internally at work. One option is to set up two app servers one internally and one externally outside the firewall. Another opt