Ipad 2 in recovery mode and will not connect to itunes after trying to install ios5.
tried to update to ios5,finished d/ling and when about to install, syncing-related(don't quite rmb) popup showed up and interrupted the installation,asked to continue or cancel, I cancelled, finished syncing ipad, clicked update again, installing but recieved error 1602, now ipad = recovery mode,BUT wont connect to itunes. help!
EDIT: this is what happend
so I tried using a differnet computer, restoring it to the ios4.3.3, then once my ipad is out of recovery mode, i went back to original computer, connection worked, then i tried to update to ios5 again, success.. but when restoring, got stuck at "preparing ipad for restore" for 10 min, then got error 1602, then back to the same problem, ipad is in recovery mode, and wont get detected by computer. HELP
Similar Messages
-
After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server. I have already tried the resetting with power swich and home button and plugging into computer but it says the "iPhone software update server cannot be contacted." I am locked out of my phone. Does anyone have any idea how to resolve this issue and get the phone working again. I will add that I am now trying to restore it on a different computer with a lower version of itunes, but the computer that it initially happened on had the updated itunes and gave me the same result ... nothing. Thanks for your help in advance.
Try going to recovery mode as described here. You may have to try this more than once to succeed.
Use the original iTunes that the iPhone synced with.
http://support.apple.com/kb/HT1808 -
Iphone 4 stuck in recovery mode and will not restore in itunes. HELP!
Hey Guys
I tried to jailbreak my iphone (bad idea obviously) and ever since, its been screwing up.
At first, it was stuck on the apple logo- Then I followed some videos on Youtube and it was stuck on the Pineapple from Redsnow..
NOW its stuck in restore mode (the screen with the USB and the Itunes symbol) I have tried to restore it 3 times and it gives me an error message (1604) or it doesn't even restore.
HELPP! It's been like this all day. What could I do?FIRST, edit your hosts file (which was corrupted by the jailbreak process) and remove any references to gs.apple.com; delete the whole lines and save the file. If you don't know how to do this you will have to get help, and it shows that jailbreaking was a bigger mistake than you thought.
Next, connect to a USB port directly on the computer, not a hub and disconnect all USB devices that consume power or bandwidth (like USB drives).
Put it into DFU mode to restore. With the phone disconnected hold HOME and SLEEP until a black screen appears. Immediately release SLEEP and continue holding HOME. While holding connect to iTunes and continue holding. After a while (perhaps several minutes) iTunes should recognize the phone. When it does release the HOME button and hope for the best. -
I dont know what to do . Like.. Am i supposeto put it in "disk mode?" idk how to . What is the pause and play botton on an ipod touch... ??
What happens when you try to restore via iTunes? Error message?
-
I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.
RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
After trying to download ios 7, iPad will not charge, will not open and will not connect to itunes. Sometimes, screen will switch from Apple logo to low battery notification, but doesn't look as if battery is charging.
Connect with cable to computer. Your ipad is in recovery mode.
Follow directions to fix
http://support.apple.com/kb/HT1808?viewlocale=en_US -
Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes
Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes to do a restore. I have tried to do a reset using the sleep button and home key and all I get is a white band across the screen and then it boots into the main system but it is just a series of white lines going across the screen, how can I do a restore on this?
Hey dbwithers,
Thanks for the question. I understand that you are experiencing issues with your iPad after attempting to update to iOS 8. To isolate these issues, let’s try placing your iPad in recovery mode and attempting a restore with iTunes:
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
My ipod is in recovery mode and will not do anything
my ipod is in recovery mode and will not let me do anything i have tryed to reinstall but still nothing
Just what happens when you connect it to your computer and restore via iTunes?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
How do i fix my 3gs that is stuck in recovery mode and will not restore?
how do i fix my 3gs that is stuck in recovery mode and will not restore?
well if it's in recovery mode, all of the data is already gone. this article mey help you get it working again: http://support.apple.com/kb/HT1808
-
What does it mean when my Ipod shows me an itunes icon but doesn't let me go to my home screen AND when I plug it into my Macbook it tells me my Ipod is in recovery mode AND will not be restored!?!?!?! HELP!!!
. . . sparse bundle could not be accessed (error -1)
-
HT201210 my ipod is in recovery mode and will not restore
my ipod is in recovery mode and will not restore
What happens when you try to restore via iTunes? Error message?
-
i tried to up date my i phone 4 to iOS 5 then it wiped my phone and now it tells me to connect to iTunes and that the iPhone is in recovery mode and when i connect it goes to preparing to install to iPhone but never goes any further how do i restore the phone
by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update. -
my phone goes in to recovery mode and flash logo connect to itune, when i connect to itune the msg disply update software and i click that than dwnld software to itune, when software dwnld and installing to my phone after sometime msg disply "errore no. 21" and software not install to my phone
From TS3694:
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart. -
My iphone 5 is in recovery mode and won't connect to itunes
I was trying to update my phone using itunes but now my iphone 5 is stuck in recovery mode and won't connect to itunes.
Hello nancarter97,
Thank you for the details of the issue you are experiencing with your iPhone 5. I would be concerned too if my iPhone was stuck in recovery mode and not recognized in iTunes so that you can restore it.
I recommend the following article for the issue you described and specifically this step:
5. Use iTunes to restore your device.
If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
Find the full article here:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I try to update my iphone 4 to ios 7.1.1. But now my iphone stucks in recovery mode and can't connect to itune. i use windows 7
Try the iTunes troubleshooting advice here:
Windows - http://support.apple.com/kb/ts1538
Maybe you are looking for
-
Depreciation error - Unplanned posting run allow for future period
Dear , Need urgent advice for depreciation error happen in our production system. FYI, our fiscal year variant 2013 = Feb 2012 - Jan 2013 ( We are now at month-end close for Pr 1 2013 ).And fiscal year close 2012 AJAB and Carry forward ARJW have succ
-
TS3212 Problems installing iTunes
I have a series of errors when trying to install iTunes on a Windows 7 64 bit system with a2.8Ghz cpu. The error msgs are as follows:C:\Users\Vince\AppData\Local\Temp\IXP733.TMP\iTunes64.msi cannot be found. Verify you have access to this location. A
-
Repalcing Obsolete command STOP in ECC 6.0
Hello all, I am working on the upgrade from 4.6 to ECC 6.0. Can any one of you tellme the replacement for the command STOP in ECC 6.0 as it is obsolete in ECC 6.0. <REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN> Regards, Arun Edited by
-
How to print draft of AR invoice by making query
Hi, do you know how I can make query of AR invoice draft so that the UDF, header, row items can be showed in it? Thanks. Raymond Edited by: Rui Pereira on Aug 6, 2008 4:11 PM
-
Labview 2014 DSC install error
Tried to install the new DVD's and received an error trying to load the DSC module SQL server 2005 backwards compatability 64 bit wrapper on windows 7 64 bit enterprise version. Picture attached is the install error. Second picture is the error when