Ipad 2 ios 6 airport networks not working

I have around 19 ipad2 that i supervise with apple configurator.
Today i programmed approx 16 of the using configurator, it automatically upgraded then to ios6 even though i told it to use ios 5.1.1
Now when i connect them to any of our airport express's its says its connected on the wifi page, but i get no connection shown in the satus bar at the top. i know they are negotiating with the airports because its assigns them a IP address. But i cannot connect with the vnc devices i have connected to the LAN port of the airport.
I know the airport is functioning as i still have a few ipads running ios 5.1.1 and they connect fine.
Someone help.

What iOS do you have? The iOS only has limited backwards compatibility and that could be part of the issue. It's quite common for mac computers, iTUnes mac programs, iDevices to all have a limited range of total intercompatibility....in other words, they only go 'back' so far. If you upgrade one part you have to upgrade the rest (even if 'rest' is nothing but a PC, iTUnes and the iDevice)
If your 2 is up to iOS6 then it's very possible that you have to upgrade to iTUnes 11.

Similar Messages

Help - Airport network not working - confused!!

Hello, I wonder if anyone out there can help. I have got a problem with my airport network that doesn't make any sense and I havent seen another post with the same problems.
I have an imac G5 with 10.3.9. I have a wireless network set up, with an airport wireless card and two ax boxes (the second was bought later to boost the signal when we moved the Mac to another room). Initially it set up fine and worked for about 8-9 months. Then I noticed the second ax started behaving strangely. It would occasionally turn from 'green' to flashing amber for no reason - often after it had been on for a while. Turning it off and on did not change anything. Usually though it would work again the next day after being off all night. This continued to happen randomly until a couple of months later it switched to flashing amber continually.
I thought it had 'lost' the network so I tried using the airport set up assistant to reconnect it. However the set up assistant does not recognise ax number 2 any more, so I am not able to reconnect it. At the moment I am running off a faint signal from ax number 1.
I also tried setting up a completely new network from scratch. Again the new network is fine from the base ax bx but ax number 2 is still not recognised by my mac.
I also have a wireless printer connected to the network which does not work any more. This is where things became more confusing. The printer needs a boost signal to operate so when my booster ax went wrong the printer would not work. So I moved the printer and mac nearer ax number 1 to ensure it would pick up the network. However it still didn't work. So I attempted to set up the printer as wireless again, thinking it had become 'disconnected' somehow. However during installation you have to select the network to connect to. The computer would not pick up the apple network at all from ax number 1, yet it easily recognises our neighbours network from the flat above us. Strangely when I tried turning on the faulty ax box, the printer set up program picked up the faulty ax and not the original ax. But obviously I can't use the printer from the faulty ax box because it doesnt connect to the rest of the network.
So now I am confused. I am not sure what has gone wrong and what I need to replace. Originally I thought it was the second ax box that had gone wrong. But as the printer software can identify the second ax box I am not sure that this is the problem. Could there be something wrong with the airport card? I have checked that the card is properly connected and there is nothing visibly wrong there.
If anyone can help - please reply as I am going crazy here with things not working and don't know what to do next.
Thanks, Wrenster

Hello Wrenster,
I understand why you are confused, I was too while reading your post. However I have the solution for you. I believe you are a victim of environmental interference. Someone in your neighborhood just moved in with a another network, someone had a baby and is using a baby monitor, or maybe a local ham radio operator just got his license. Who knows!
This is what you need to do. Get all the devices in the same room and preform a hard restart on each one them per http://docs.info.apple.com/article.html?artnum=108044. Remember to preform a hard restart! After performing a hard restart on all three devices check the wireless networks available. You should have 3 ( one main and 2 airport expresses) ( or two depending on how many airports you own, I am not sure from your post). If you don't have the correct amount you may a bum base station and it may need to be replaced. But if you have the correct number of wireless networks ( Apple network XXXXXXX), use the airport admin utility ( inside of the utility folder ) to locate the main base station and configure it.
You will know when you are on the configuration page when you can read Name, Contact and Location.
First change the name to the location of the main base station, ie; it is the den so name should read DEN. leave the contact and location alone. On the bottom half of the page is where you create your network, so under network name change it to your desired network name ie; when others come over to my house I have them select COWSWEAT from the network list.
Second click on the change wireless security and set the security to WEP 128 BIT and make your password. Once you have configured a successful password be sure to click on the lock on the main configuration page ( the one with password under it) to get the HEX password for your PC friends.
Third ( we are almost done ) Select the WDS tab at the top and enable this base station as a main station. Select allow other wireless client on this base station as well. Now on that empty list box below click the plus sign to the right to add other base stations to this WDS network. From here you should be able to select the other 2 base station that we have not configure yet ( but preformed a hard restart on). After you have added them ( be sure the check box for auto configure is selected) they should read in the list that was empty on the WDS page.
Now update this should start the update process and may take 5-10 mins, it should provide a summery pop-up when with each station is done.
( Also you may get a message that there is update for the base station, please preform the updates for the selected base stations)
Now when it is completed check to see how many networks you have available ( it should only be one ). Select the network and confirm that all of your base stations appear under the select a base station in Airport admin utility, then move them back to their homes around the house. Giving them 45 secs to restart they should turn green if not , they could out of range of each other or the environmental interference could be affecting them. So you my need to rearrange them until they all green.
Good Luck,
Cowsweat

Timed access on airport network not working

I've set up a schedule on my airport extreme/express WDS network as accurately as I can. But my daughter on a windows machine can still access the internet through this???
Please tell me what I've done wrong.

No I have the AP extreme set up as a WDS main and the AP express as the participant.
I have the MAC address of both the laptop I wnat to limit and the APexpress limited on time. The Laptop doesnt have the range to reach the APextreme base station.
When I look at the access control in the AP express there is no option for timed access.

My iPhone 6 (iOS 8.2) not working in AirPort & AirPrint

My iPhone 6 (iOS 8.2) not working in AirPort & AirPrint

Hello ivanwutw,
Thanks for using Apple Support Communities.
It's not exactly clear what the issue is here with your AirPort Express or Extreme, but if you cannot connect to Wi-Fi on your iPhone, please follow the directions in the article below.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Take care,
Alex H.

Installed ios 6 on new iPad and siri will not work.

Good morning, I installed ios6 on the new iPad and siri will not work. Each time I try to use siri she says "uh oh, I'm having a problem. Please try again. I have tried turning siri off and back on again. Resetting the iPad, resetting the network, turning Airplane Mode off and on again. All to know avail. My iphone 5 works great and so does my wife's iphone 4s with ios6. I have called Apple support but there only suggestion was that the servers were busy. If that was the case my other devices would not work either. Plus the servers wouldn't be busy for four days. Any help anyone could provide would be greatly appreciated. I was looking forward to using siri on the new iPad and other folks don't seem to be having a problem.
Thanks, and have a great day.

Then you need to change your device details as this still says iPad2.
It's very possible Apple's servers have been busy for 4 days as not everyone downloaded iOS 6 on the day it was announced. I downloaded it last Friday, myself, as an example.
There are a millions and millions of people using Apple iDevices.
Just because everything went fine with the iOS 6 updates of your iPhone 4 and 5 doesn't mean something couldn't have gone wrong with an update to your iPad3
If the iOS update missed something during the download, I am not sure how to go about re-downloading iOS 6 to fix the issue you are having.

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas?

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas? I have tried unplugging, restarting, and resetting. No luck! Thanks!

You should probalby contact Netgear

IPad (iOS 4.3) not syncing. No recommended fixes work

iPad (iOS 4.3) not syncing. No recommended fixes work. Cant install new ios version. Cant use wifi or icloud to sync. I think the only way forward is to buy a new iPad - but don't want to lose all the books purchased, as well as the apps, on this one - any suggestions on how to save these/transfer to new device?

If you can't use iCloud or you can't sync with iTunes, you can't backup the device or transfer the content to anywhere.
You can download much of your purchased content again for free - and recover your apps, books, music and so on that way.
Download previous purchases - Support - Apple
Did you try restoring using recovery mode as on of the "recommended fixes"?
iPad: Unable to update or restore

Auto-Brightness on iPad mini Retina is not working properly.

Hello! Noticed that the Auto-Brightness on iPad mini Retina is not working properly.
It works correctly only when such a dark place, then unlock the iPad brightness will be at a minimum. Likewise, if unlock iPad in a room with light, the brightness will adjust to the surrounding space.
If I turn light into a dark room, the brightness slider does not move, and stands on the site. Checked on the iPhone 5S, there problems are not present. Auto Brightness is working correctly.
P.S. Sorry for my bad english!

Godly19 wrote:
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

IPad audio output is not working properly, except on Siri. Any ideas on what is wrong and how to fix it?

iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help. The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
my iPad is a 3rd gen, 16GB wifi only model, if that helps
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!

Godly19 wrote:
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

Airport express not working since today's itunes update

Since updating iTunes today, Airport Express not working. More specifically, the Airport software will recognise the device exists, but iTunes cannot connect to it, just getting error message.

Ray Dio wrote:
Since updating iTunes today, Airport Express not working.
try this:
go system preferences > network > airport > advanced > TCP/IP and set *configure IPv6* to off. click on apply.
now have iTunes connect to the remote speaker again.
JGG

My iPad's mic is not working what should i do

My iPad's mic is not working what should i do

Hey Khaled zaki,
Thanks for using Apple Support Communities.
The article says iPhone, but the same troubleshooting steps apply.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Follow these steps, testing after each.
Make sure nothing is plugged in to the jack connector.
Make sure nothing is blocking any of the microphones (refer to the pictures below to find your device's microphones). Check for these:
Dirt or debris
A screen protector or case
When you're holding your phone next to your ear, make sure you don't block the microphone with your fingers or shoulder and make sure to speak into the microphone
Turn the iPhone off and then on.
Update to the latest version of iOS.
If necessary, find general iPhone hardware troubleshooting suggestions.
For further assistance, contact Apple Support.
Have a nice day,
Mario

I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud acount.

I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud accountedge

Did you set up different email addresses for each device?
iOS: Using FaceTime
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems

Exchange mail after iOS 8 upgrade not working

exchange mail after iOS 8 upgrade not working.
I can not get email from my exchange account.
Any suggestion?

Just had this issue. I turned WIFI off and it connected fine. Then turned WIFI back on and working as always.
It had something to do with the WIFI conflicting with the exchange server.

My ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working. i have a a windows PC please help thanks

my ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working.
ive tried everything and ive been to the store which was when i was given a new ipad mini. i have a a windows PC please help thanks

Are you attempting to sync music from your iTunes Music Library on your PC?
What options do you have set on the Music Tab for your iPad in iTunes?
What happens when you sync?
Any error messages?

Ipad 2 ios 6 airport networks not working

Similar Messages

Maybe you are looking for