Ipad 2 ios 8 update stuck on Apple with progress bar

Hello,
I'm from Paris and I didn't find any solution around me.
So, I hope you'll help me to find something. Sorry in advance for mistakes. My english isn't perfect.
Yesterday, I tried to update my Ipad 2 to iOS 8 in OTA way.
Everything was going fine until the Ipad rebooted. Since this step, the Ipad stucks on the famous Apple with a progress bar under. The progress bar is 30% filled.
I tried to put my Ipad in DFU mode and it doesn't works.
The Ipad switch off few seconds and it switch on back in the state describes before.
Could you please heeeeeelp me.

i have the same problem, my ipad 2 ios 8 update: stuck with apple logo refreshing every 2 minutes or so with the black screen (like the one for boot up or reset) but not turning on or connecting to itunes. plugged it in to the computer for an itunes connect to do a hard reboot and the device shows up in grey (meaning i cannot click on it) for a minute while the ipad cycles with the apple logo. the device showing in itunes then disappears and the whole cycle starts over and over again. yes, please help!
update: ok so another member suggested this and it is working so far, although my data will be lost...it is what it is:
DiavonexFeb 5, 2014 9:46 PM Re: Unable to start my Ipad 2 after upgrading to Ios 7.04 . The screen is stuck with the start up apple logo till full discharge. Please help.
Re: Unable to start my Ipad 2 after upgrading to Ios 7.04 . The screen is stuck with the start up apple logo till full discharge. Please help.in response to Pratik Nayak
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

Similar Messages

  • IPhone 4s auto shutdown into dfu, when restore, stuck at apple and progress bar at 0%

    I have a iPhone 4s running ios7 autoshut down and go into DFU mode. I try to resture using iTunes but only get as far as the apple logo and progress bar at 0%. Please help!

    Hello,
    this Solution fixed my Problem.
    http://www.reddit.com/r/jailbreak/comments/1v6zkz/how_to_fix_boot_loop_without_l osing_data_stuck_on/
    I restored my iphone to ne newest iOS7.1.1 without losing my preferences, passcode, photos, music, pdf, ibooks, apps and app data and so on. After Restoring i saved the app data and photos with the tool itools.
    I think its a good solution for people, which not backup there data with itunes and icloud.

  • Just installed lion update stuck grey screen with status bar

    Just installed mountain lion update and now have grey screen, status bar that does not move with apple and spinning grid ball
    Help!
    Lisa

    Hey Lisa,
    I would try running through the suggested troubleshooting steps in the following article, it'll go over a gray screen on startup error:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Welcome to Apple Support Communities!
    Have a good one,
    Delgadoh

  • IPhoto 09 rebuild stuck Examining Library with progress bar unmoved

    It has just sat there for 2+ hours  The activity monitor shows iphoto is very busy.  Should I keep waiting?
    Problem occurred when iphoto was opened (and it worked fine three days ago) and it told us that the library was busy of needed to be rebuilt.  Reboot of imac didn't help.

    I have made a copy of a week-ago version from time machine.  She has added no phtots since then.
    To add to léonie's response the library must be restored as follows from within the Time Machine application:
    OT

  • Ipad mini is stuck on Apple Logo, have shut down but still won't reboot

    Ipad mini is stuck on Apple Logo.  Have done a forced shut down, but when it starts up again its back to the apple logo - its not moving either

    Hi Bonney Fam,
    Thanks for contributing to the Apple Support Communities.
    You mention that your iPad mini is stuck at the Apple logo after it shut down. If you haven't already, try resetting it again:
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    From:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    If the iPad still doesn't start up past the Apple logo, try this method to reinstall iOS:
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    From:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    All the best,
    Jeremy

  • Msn email "drafts" folder lost in IOS update; did not reappear with "restore".  Any clues?

    msn email "drafts" folder disappeared in IOS update; did not reappear with "restore". 
    Any clues?
    Thanks in advance!

    I thought I would voice my opinion as well.
    I have an iPhone 3G and whilst I would like to say that it is excellent and that I enjoy using it the reality is that in its current state (2.02 software) it is unusable. I really had to hold my tongue there - I feel really mad at present and feel that apple should try to release software that has been through at least one decent test cycle.
    I am on my second phone - the first being returned at the suggestion of apple care who suggested it may be a hardware fault - there was no fault with the hardware - again software issues but I exchanged it to cover both bases.
    I have never found that the backup to work and simply do a full restore - which at present I perform on a daily basis as the phone locks at the apple screen on a daily basis and it then takes over 5 hours to restore - it is unusable.
    I suspect the underlying issue in my case relates to the volume of applications that I load onto the device - but hey it should be fit for purpose!
    What I am looking for here is honest recongnition and report of the issues and problems with the device from apple - and releases that give a clearer indication of their intended purpose i.e. a little more detail than "Bug Fix". Is that too much to ask?

  • I just loaded the 8.1 operating system on my iPad.  It has been sitting for about 4 hours with the black screen and white apple with the bar underneath.  What should I do?

    I am having trouble after loading the 8.1 operating system on my ipad.
    My iPad is model A1397 EMC 2424
    MEID ********
    Serial DL******JHH
    64GB
    I started loading 8.1 about 5 hours ago and it is still sitting with the black screen with the progress bar underneath.  It shows that it is almost done loading - just has a tiny bit of the progress bar left.
    <Edited by Host>

    I Don't know if this will work for anyone else but just FYI - after loading 8.1 on my iPad it froze for several hours on the black screen with white Apple and progress bar underneath. It would not do anything.  I thought I was doomed.  I accidentay left it sitting overnight without plugging it Back into the charger. I meant to but got sidetracked and thought it was plugged in. During the night the battery was totally drained so this morning my iPad was dead. I plugged it into the charger and after a few minutes the battery icon came up showing it was charging. I gave it about 30 minutes and then turned it on and the new operating system came up. It looks like it might be ok now.  I can't say I recommend this, but it worked for me.

  • How far dose the first generation's iPad iOS  updates go?

    I cannot download  some of the new apps because my iPad has to have the latest iOS.
    When I go to download the latest iOS it states that I have the latest version.
    So , my question is : How far dose the first generation's iPad iOS  updates go?
    How can I upgrade to the very latest iOS?
    I also get knocked off from websites a lot.
    Thanks in Advance.

    5.1.1.
    (103242)

  • I Was updating my ipod touch and it was all going ok until the white apple with the bar came up and then itunes crashed out, it is still on with the white apple and i cant turn it off please help me

      Was updating my ipod touch and it was all going ok until the white apple with the bar came up and then itunes crashed out, it is still on with the white apple and i cant turn it off please help me this has been like this for 30 minutes

    Did you try to reset by holding the sleep and home button until the Apple logo comes back again?
    If this does not work, try to connect again in recovery mode: http://support.apple.com/kb/HT1808

  • Gray Boot Screen with progress bar & SMC Issues

    Hi All,
    Over the last few days I've experienced the grey boot screen with progress bar three separate times after the finder froze and I was forced to manually reboot my imac. Previously I have only seen this during a Firmware update.
    I am also concerned about the Finder freezing. It has been happening when I've been trying to access any of my external hard drives at random intervals (connected via usb, and f800). I am concered that my SMC controller might be failing as these drives are testing fine on other computers and in drive test programs. Also, the f800 drives have been self unmounting.
    I had my internal drive replaced by apple a few weeks ago, could they have somehow damaged the smc controller unintentially? Or is this simply a Snow Leopard hiccup? (I'm running 10.6.2). I'm really starting to get annoyed with having to hard reboot or constantly reset my SMC. Any ideas before I take it in to a store?
    Thanks!
    Message was edited by: fkick1

    I have found other users have this same problem when using windows. My setup worked fine until I did a windows update. Now apple partition is inaccessible. Guess the windows update whacked the apple partition. Apple should have a workaround. Bad Windows!

  • Downloaded the 3.1 onto my 1st generation i pod touch, when turned on there is an apple with a bar half full under it. I have reset but can not bring up my home screen now. HELP ME!!!

    I have a first generation I pod touch. I recently downloaded the 3.1 version to it. In the middle of the download, an apple with a bar appeared under it, the bar has been only half full for many hours now. I reset the Ipod, but still this appears, and can not get my Ipod to turn off or get to the home screen. I can only reset it to turn it off! HElp me please! Or should I truck it down to the MAC store downtown?

    Try connecting it to your iTunes library in recovery mode and restoring it.  See this article for instructions on getting your iPod into recovery mode.
    iOS: Unable to update or restore
    B-rock

  • Macbook opens slowly with progress bar below the logo

    macbook opens slowly with progress bar below the logo, what's happened can it be fixed and how Yosemite OS
    Thanks

    The status bar below the Apple logo in Yosemite is not a bug, its a feature. No need for a fix.
    The reason why your MB starts slowly shall be answered if we have more info on your MacBook (RAM, version, etc.)

  • TS3148 iMac Startup Apple Logo Progress Bar Hangs.....

    I Lost my Installation Disk what can i do.. please help in this.... iMac Startup Apple Logo Progress Bar Hangs.....

    You likely have a problem with the drive as the progres bar is trying to fix the drive and it can't.
    You need to backup your user info off the machine as soon as possible.
    hold the shift key on booting, that may get you in.
    see this
     Mac won't boot or "You need to restart"
     Step by Step to fix your Mac
    order a new 10.6 machine specific disk from Apple, your going to need it.

  • Splash screen with progress bar and multiple jar files to load

    Hello,
    I have been looking to the new features in java 6 for splash screens. I haven't implemented this never before and i was wondering how i could do the following with java 1.5 or 6:
    I would like to see a splash screen with a progress bar that "grows" when every jar file has been read.
    At this time i call my application like this from a shell script:
    exec "$JAVA_BIN" -Djava.library.path=$LIBRARIES_J3D -classpath xxxx.jar yyyy.jar zzzz.jar ...
    where xxx.jar, yyy.jar and zzz.jar are very heavy jars.
    So i would like to see in the progress bar 33% 66% and 100% when they are loaded.
    I do not know if this is the right forum to ask for this. If no, please point me which would be the ideal one.
    Any help will be very useful. Thanks to all!

    Am 10.07.2015 um 07:17 schrieb Lalit Solanki:
    > Hi friend,
    >
    > I am create pure eclipse E4 application and trying to splash screen with progress bar and message.
    >
    >
    >
    >
    > but above image in only support eclipse E3 application so pleas help me how to add progress bar and message in eclipse E4 application
    >
    Hi Lalit,
    there's a Bug entry: https://bugs.eclipse.org/bugs/show_bug.cgi?id=382224
    Meanwhile you can use this solution:
    https://www.eclipse.org/forums/index.php/t/328812/5ceed4bcaa683a94d65efb161bffd217/
    Regards,
    Ralf.

  • CS3 install silent with progress bar ??

    Is it possible to install full CS3 with progress bar showing when the program silently installs?
    Install works fine using UI mode Silent and Full, but I can't find andy other options?
    My problem is when using the silent install of full CS3, shortcuts are available before the installation is finished. Since the installation takes time, users may click the shortcut before the installation is finished, resulting installation fails.
    Using the UI Mode Full is dependent on the users, and not accepted by company.
    -Odesti

    We too are in the same boat, we need a progress bar so that our users know that we are deploying the application.
    I've tried various random switch for the "UI mode" but none work. There must be others than silent or Full.
    Phil H

Maybe you are looking for