Ipad 2 ipod stops playing for no reason

recently the ipod on my ipad 2 stops playing music mid-song for no apparent reason... I haven't actually change anything or done anything unusual to it, so not sure what could be causing this?
Thanks!

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

Similar Messages

  • ITunes stops playing for no reason

    Every once in a while, iTunes will randomly stop playing in midsong. I'm usually using a different application (Safari, MS Word, etc) when it happens. When I go back to iTunes the "play" key is on pause, as if I were to have paused the song myself. When I press play again, it's all good.
    This used to happen with my 5 year old Powerbook G4 and I figured it was just the computer slowly decaying, but the same thing happens in my brand new Macbook, so I'm assuming it may be a software glitch. I'm running 7.5 right now. It's not a huge inconvenience, but I know it's not supposed to be happening.
    Anyone else have this problem?

    You could try deleting the plist:
    1.) Quit iTunes
    2.) Go to Home > Library > Preferences and delete a file called com.apple.itunes.plist
    3.) Restart or logout/login comp
    4.) Open iTunes and try again
    Also try in a new user. That'll narrow it down to an issue with your account or something more system-wide.

  • Movie clip stops playing for no reason

    I am making a banner that has multiple movie clips sharing the same area, creating different rainbow effects when different areas (invisible buttons) are moused over.
    First of all I couldn't figure out if there was a way to have one invisible button over the whole area that changed to a different colored effect with each mouse over (first mouse over the black and whites would change to reds, second would change it to blues, third would change it to browns, etc.). Since I couldn't figure this out I settled on creating three buttons covering a third of the banner each, so when the mouse passes over one button it changes to reds, over another button it changes to blues, over the third it changes to browns.
    The effects are movie clips where each frame has another stripe changing color so it goes in a wave effect from one to the next, and then goes back to white and black in the same manner.  The first frame of each movie clip I had to turn into a nested movie clip so I could turn the alpha to 0, since I was going to have these color effect movie clips on top of one another in the main timeline on different layers, and so you could see the effect even if that color layer wasn't on top. I used the same nested movie clip with zero alpha for the first frame of each color effect clip (reds movie clip, blues movie clip, etc), so I dont' know if that's an issue.
    Anyway, it seemed to work fine for a while, but after working on it for a while longer (and not getting any further since I removed most of the changes I made), now when I test the movie the mouse over does not seem to work correctly. It works fine, seemingly, for the first time I mouse over each button, but in order to have it work again I have to mouse over the button twice, and then it will pause randomly during a part of the clip and I have to move my mouse back over for the movie clip to continue.
    I can't tell if this is because of the overlapping movie clips, or because my buttons are messed up, or if my actionscript is messed up, or if the timeline has to be longer, or what. Currently the timeline is 55 frames, the same as each movie clip.
    I put a movieclip_instance.stop(); command in the first frame of the main timeline, is there a better way to do this? Should I put the stop command in the movie clip itself?
    Here is a section of my AS in the main timeline, this is my first time programming ever, in any language, and trying to learn from the internet is more difficult than I thought it would be.
    redmovie.stop();
    red_btn.addEventListener(MouseEvent.ROLL_OVER, playRed);
    function playRed(event:MouseEvent):void
              redmovie.play();

    I am not sure of what the problem is, so I don't know if this will help or not.  One thing I might suggest is that you use gotoAndPlay(1) instead of play().  That way, if your movieclip is in the middle of playing it won't continue but will start from the beginning.
    You could use one button to have the different movieclips play in sequence if you prefer that.  You would just need to have some form of counter that keeps track of which is the next to play. Somethin like...
    var mcCounter:uint = 0; // start at 0 since an array is being used to identify which movieclip to play
    var mcs:Array = new Array(redmovie, bluemovie, brownmovie);
    only_btn.addEventListener(MouseEvent.ROLL_OVER, playMC);
    function playMC(event:MouseEvent):void
             mcs[mcCounter].play();                  // tell the current mc to play
             mcCounter += 1;                            // increment for the next mc
             if(mcCounter == 3) mcCounter = 0;  // reset the counter if it exceeds the array

  • 2nd Gen Ipod Stopped Working For No Reason :/!

    Basically, i've had my ipod for about 2-3 years and today it suddenly stopped working. By this i mean, its off and i can't turn it back on!
    I can see a small light on the top right corner of the screen but that is all.
    Also you know where u put the charger in? at the bottom of the ipod? that smells a tiny bit of burnt!
    I dont know whats happened, i haven't dropped it or slipped water all over it! Please Help! i got this given as a gift so i dont know if there is any warranty!

    Try here:
    iPod touch: Hardware troubleshooting
    If not successful, yu probably have a hardare problem.  Maybe a dead battery.  I would make an appointment at the Gnius Bar of an Apple store.  It is free except for your time.

  • Hi, I have 8 GB apple ipod. I connected to Linux PC, afterwords ipod stopped playing music. please suggest me, what can I do for rectifying this issue.

    Hi.
    Hi, I have 8 GB apple ipod. I connected to Linux PC, afterwords ipod stopped playing music. please suggest me, what can I do for rectifying this issue. Please help me.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • IPod stops playing when using Safari

    Ever since I updated to 1.1.2, everytime I'm listening to the iPod and open Safari to surf, the iPod stops playing after about a minute or two. The song isn't over, and its not at the end of the playlist. The music doesn't fade out either, like its receiving a call or email. Just straight up cuts out. I tried restarting the phone, which helped the first time, but now it starting doing it again. I've searched for answers elsewhere, to no avail. Thanks!

    I had heard about this for quite awhile, but never experienced it. Then the other day I was sitting outside an Apple Store, listening to some music and decided to take advantage of the free wifi for a moment. Suddenly every song would stop everytime a page loaded or a I used the back button. Totally reproduceable.
    I held down the start/off button and turned off my iPhone, waited a few seconds, turned it back on, and the problem went away -- at least for the time beling.
    Sorry I don't know a permament solution, but that did work for me.

  • My camera on my iPad 2 has stopped working for the second time.

    My camera on my iPad.2 has stopped working for the 2nd time. Last time it just started working again after a couple of months.
    I have tried closing the camera app completely & also re-booting the iPad completely but to no avail.
    Any ideas anyone?

    You'll first need to have iTunes on your computer - from the summary page (the one that opens when you select the iPad in iTunes) it'll give you options for backing up and restoring it. On that page just select 'restore iPad' and that'll get it started.
    Hope it's just software then, those out-of-warranty replacements can get pricey.

  • Qosmio X500: power adapter stopped working for no reason

    Hi,
    Now i have my Qosmio X500 for a year and i like it, however i have small problems with it, and i would like to know if it can be problematic.
    The first thing is that my power adapter stopped working for no reason,
    So i bought a new one, but it always made some noise when the laptop was fully charged.
    I know people with the same laptop and their adapter didn't make that sizzling noise, it looks like it was already defect from the begin.
    Then i have one dead pixel in the middle of my screen, no problem for me.
    Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...
    Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
    So all those problems i have annoy me, especially the last one (webcam and speakers problem), can this fit in the warranty of the laptop? I did extend the warranty for one year...
    Thanks in advance.

    > The first thing is that my power adapter stopped working for no reason,
    > So i bought a new one, but it always made some noise when the laptop was fully charged.
    I think this is AC adaptor fault maybe a broken cable or something like that I would recommend you to replace this get in contact with the dealer and ask for the new one.
    > Then i have one dead pixel in the middle of my screen, no problem for me.
    I found a info about such issues:
    +Information on screen technology and pixel failure tolerance for LCD displays
    +http://aps2.toshiba-tro.de/kb0/TSB9502LZ0000R02.htm
    > Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
    Maybe you should ask Toshiba notebook technicians for a check maybe some screws or the hinges are loose.
    The speakers should be checked with connected headphones. If you will not notice the same crackling sound using headphones, then the issue might be related to speakers

  • HT1349 my wifes ipad has suddenly stopped searching for internet hubs and when trying to access our home hub it says unable to access ?

    My wifes ipad has suddenly stopped searrching for wifi connections and when our home hub is found it says unable to access ? It was working properly the other day ?

    Have you tried rebooting the Hub? Unplug it from power for about 30 seconds and plug it back in again.

  • So my Ipod Touch restored for some reason, and it doesnt show any of the apps i bought on iTunes. How do I make them come back?

    So my Ipod Touch restored for some reason, and it doesnt show any of the apps i bought on iTunes. How do I make them come back? Please Help

    Redownload them from the iTunes Store. It's free.
    (58292)

  • TS1398 i have an ipod touch and for some reason cannot connect to itunes store. I have full wifi and can get on my safari and was able to update my apps before. I can still get apps but when i try to update it says cannot connect to itunes store. Some1 he

    i have an ipod touch and for some reason cannot connect to itunes store. I have full wifi and can get on my safari and was able to update my apps before. I can still get apps but when i try to update it says cannot connect to itunes store. Some1 help!

    See these previous dicussions:
    App Store Updates (but only Updates)...: Apple Support Communities
    Apps suddenly don't update: Apple Support Communities

  • My ipad mini isn't charging for some reason what do i do?

    My ipad mini isn't charging for some reason. What do I do?

    Are you using the wall charger? Connecting to the USB port on your computer gets the Not Charging message.
    Need more info about your problem.
     Cheers, Tom

  • I cant get a photo project to email the moblile me address to someone else.  I know how, but it has stopped working for some reason.  Instead of pulling up the web address on the email form, it puts an error message?  Any ideas?

    I cant get a photo project to email the moblile me address to someone else.  I know how, but it has stopped working for some reason.  Instead of pulling up the web address on the email form, it puts an error message?  Any ideas?

    Michael,
    The link for the word 'HERE' directs to a Evergreen School District page, which outside of Mobile Me and/or Aperture. Your school district network might be intercepting the request from Aperture and displaying the 'network authentication page' that you see, instead of the email. I would get with the IT department to see if they can help you get around this.
    Have you also tried using the 'Tell a Friend' feature from another network location, like starbucks or your home?
    Cheers,
    Owen.

  • Gtx 970,,Stopped working for no reason

    Hi,,
    Im from Oman It is a country in the Middle East
    I own GTX 970 GAMING
     ,,, I used it for several weeks and then stopped working for no reason.I talked to the agent in the Middle East.And they told me they do not take VGAs or MBs...And They told me that i have 2 speak with the Global....I called the Headquarters (Address: No. 69, Lide St., Zhonghe Dist., New Taipei City 235, Taiwan
    Tel: +886-2-3234-5599 (REP))
    And they ask me for my email and i gave them.. Then thay say that the service Center will contact me...
    Now its Happend From 3 days and no one Contect me...

    check emails in your "SPAM" folder maybe the message is there
    else have a ask them again
    optional: >>How to contact MSI.<<

  • My iPad won't stop asking for my Apple ID no matter what I do. What do I do?

    My iPad won't stop asking for my appl no matter what I do. I've tried resetting but I can't even look for waiting apps, because it won't stop asking.

    Did you check if you are still logged in with your info in Settings/iTunes and AppStore/AppleID?
    If yes, Did you try to log out, reset the iPad, and log in again with your Apple ID?

Maybe you are looking for

  • Como recuperar acesso ao Firefox Sync sem ter a senha de acesso

    Sofri um assalto a minha residência e tive três computadores que mantinha sincronizados com o Firefox Sync levados. Como a senha de acesso ao Firefox Sync estava armazenada no próprio repositório de senhas do Firefox nos três computadores, não tenho

  • How to add the Drawings while creating Inspection Plan

    Dear all, As we can attach the files in QM01 - Create Notofication thru "Choose an Object" . In similiar way can  "Choose an Object" object can be attached to Insp. plan or any other way to attach drawing.

  • My backspace and delete button no longer work any ideas??

    I have installed all new updates and of course my extended warrenty is done any one have this issue and see I just went to back space cause I did not care for the wat way the sentence was going  but NOOOOOOooo backspace

  • Back to My Mac - can't figure out NAT stuff

    So I'm far from technical...I just can't figure out how to get Back To My Mac (BTMM) to work. I am setting this up from home now... I have walked through the BTMM manual: I start in AirPort Utility and select my Base Station. To be able to see the "I

  • C309g causes router to stop internet from router

    I bought a c309 and connected wirelessly to a Netgear N-300 router (Comcast modem),  I am able to print from my laptop wirelessly but after a few minutes i find none of the computers in the house can receive internet (though strangely my son's comput