Ipad 2 is stuck in soft reset cant power off and not recogized in itunes
After deleting the Facebook app i did a soft reset on my ipad 2 and now it is stuck on the black apple screen. ipad will not power off and i have it plugged up to itunes and still nothing. Attempted multiple soft resets again. Please help.
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Similar Messages
-
IPad 3rd gen no longer charges unless shut off and not recognized by iTunes
iPad 3rd gen no longer charges unless shut off and not recognized by iTunes. Done 2 resets, used original charger and cable and bought brand new charger and cable from Apple store. Nothing works. This started yapping after the iOS 7.1.1 update.
Common troubleshooting is to try a different USB port and to give your ipad a reset. (hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot)
You can also try on a different computer to see if it's the ipad or the computer.
When you charge, do you try to charge plugged into the wall? that's the best way to charge.
If you go through all that and it's still not working hten it may be time to make an appointment at your local apple store and have them check it out -
iPod is stuck in recovery mode, and not recognized by iTunes.
Tried all of the recommended resets and combinations mentioned, but the ipod is still not recognized. Genius at apple said it may be a hardware error, "The button is broke" but all of the buttons and cords work and i proved it to him. He then said he doesnt know, ma Now what?If it does not work on other computers then I agree with the Genius
-
My ipad is frozen with an image of the power plug and the itunes logo. It won't move off this screen even if I restart/reset it.
marloyee wrote:
... if i am going to restore my device to factory settings, application data will be lost ...
To minimise loss... Once you have Reovered your Device...
Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
My iPad won't connect to my wifi anymore. Was using it and it just quit. It is not my wifi because my daughter's iPad works just fine. I've turned it off and back on, reset, forgot this connection and nothing works. Help???
1. Turn off router for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
My phone is totally froze up cant do anything to make it work cant power off at all
my phone is totally froze up ..cant do anything to make it work.. cant power off at all
HI,
You can try a "soft reset" by holding down the volume down + power key at the same time until the phone vibrates and restarts (~10 seconds).
Nokia/MSFT Customer Care -
Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my options?
Thanks to everyone who responded and related subject helped. Holding the home button and power button simultaneously for 10-15 seconds does unlock the screen. I can now use my ipad again. However, a futher problem has arisen since updating to IOS6 and activating icloud at same time, Although not sure if its related. The problem is that when connected to my PC the itunes message appears 'Cannot read ipad'. It instructs you to restore but keeps timing out after about 1 hour. This maybe internet issue but can't understand why itunes cannot read my ipad. May need to completely erase all content & reset. Or any other suggestions why this has happened?
-
My ipad showns wifi off and not turn to wifi on. pl help.
My ipad showns wifi off and not turn to wifi on. pl help.
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. Happened to me once, about 6 months ago, and a reset got it working again.
-
Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it from system registry. My system is Windows 7 64bit.
UPDATE: The true error is : '
"itunes was unable to load data class information from sync services"
Any of the topics didnt work.
Sync on my wife's laptop works. -
After a one week logout and shutdown my macpro 1,1 laptop running OSx 10.6.8 shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?
Startup – Black screen with cursor
Startup Issues - Resolve
Startup Issues - Resolve (2) -
IPod stuck in "do not disconnect" and NOT recognized by iTunes
I updated to 7.1.1.... and my iPod is not stuck in "do Not disconnect" and not recognized by iTunes.
I have tried the Toshiba "Safely Remove Hardware" -- and selecting the iPOD -- but, notice comes back "cannot disconnect now because a program is accessing the device."
Anyone know where I can go from here??? Thanks very much.the same thing happened to me yesterday after downloading the new itunes 7.1.1 the do not dissconnect would'nt go off and computer and itunes would'nt reconize my ipod video.
so i left it alone overnight to empty battery completely.
the do not disconnect was gone in the morning then i recharged it and plugged it back in to computer and everything is fine. i don't know why it froze on me.
my husbands ipod mini had a similar problem awhile back and i did the same and it also was fine. -
Why cant i drag and drop movies into itunes?
why cant i drag and drop movies into itunes?
To make it display on the desktop, Finder > Preferences > General tab > check external disks.
The drive might be formatted NTFS for Windows which is treated as read-only on the Mac. Need to reformat it using disk utility. -
My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?
If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
I tried to reset my iPhone (3gs) with deleting all data. When it power off and automatically again on then it is showing Apple logo only. Not restore and startup my phone. iPhone alerming low charge and I tried to charge and not charging.
What I should do now?Something has gone wrong. Turn your phone off, then force it into recovery mode:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new". -
my iphone 4s will not come on. i used it today now it just does not work. i cant power off or nothing.
Try this...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
iPhone User Guide
Maybe you are looking for
-
How to create a variant to a maintenance view (trans: SM31)
Hi gurus. I have created a maintenance view (called z_jest). By running it from SM31 there is a variant option. However, I am not able to create the variant which I want to filter a selection upon in this transaction. I have even looked into transact
-
Unable to edit JSP files in a JAR file
Hi, I am trying to edit biller direct screens and I am not able to open any JSP or XML file in NWDS editor. I get this below error whenever I try to edit a JSP file cannot open default editor on content_custExtension_html.jsp. Unsupported editor inpu
-
How to find internal table fields from which table.
Hello Experts, I have to use a dynamic select inner join query. SELECT (lv_string) FROM (from_tab) INTO CORRESPONDING FIELDS OF TABLE <fs_itab1> WHERE (where_tab). ELSEIF table_1 NE ''. SELECT * FROM (table_1) INTO CORRESPONDING FIELDS OF
-
FRM-40735 on the Web, in client/server without error
We have 2 types of Form modules. Type 1 are simple multirecord modules, which uses PL/SQL library module PL1.plx. Type 2 are complex (master-detail) modules, which uses PL/SQL library module PL2.plx. In client/server, both types of Form modules work
-
Is the "deadline" variable also set when the Due transition is used ?
Hi, I needed to understand if the 'deadline' variable is also set when the due transition is used. The reason I am asking is because of the following scenario that we saw: 1. There is a Due transition form an interactive activity to an automatic 2. T