Ipad 2 locked for the the first time now what
i can not unlock my ipad 2....HELP.....!!!!!!
FORCE IPAD INTO RECOVERY MODE
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Similar Messages
-
iMac late 2009 reads only 2GB RAM,I have re-installed the card 10 times now,what else could I do?
Please give us some more details on what exactly has gone wrong with your iMac.
What size RAM module/s are you trying to install and where did you purchase the RAM module/s from?
RAM has to be installed in matched size pairs.
Make sure the RAM module clicks into place. You need to apply a little bit of force to get the module to slide in and clIck into its module slot location.
Correct, compatible and reliable Mac RAM can ONLY be purchased from online RAM sources Crucial memory or OWC (macsales.com).
If you purchased RAM from ANY other source and still can't get the RAM to work, return it for a full refund and buy RAM from the sources I have listed. -
tried to update ipad2 for the first time. now can`t use ipad and it is saying i need to turn off `find me`in icloud. HELP
You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702
More > http://support.apple.com/kb/HT5818 -
Do I need a computer to use my ipad for the very first time?
I would like to know if I buy an iPad, shall I need to have a computer to start it for the very first time?
I mean do I need to do plug in or can I start without plug in?The new iPad does not need to be activated using iTunes. You will need a WiFi connection to activate it, but not a computer.
If you are buying an iPad2, if it does not already have iOS 5 on it, then you would need a computer running the latest version of iTunes, -
I downloaded from iTunes a hd movie for the first time. What a disaster ! Keep stopping and looks like after 2 days has not been downloaded. What am I suppose to do? Can I get my money back? How?
Contact iTunes suport... http://www.apple.com/support/itunes/contact/
It sounds like you might have a slow wifi internet connection? How fast is it with a speed test from your iPad. -
Which external hard drive should I use/choose as I am setting up Time Machine on my MacBook Pro 15 for the very first time?
Any of these SATA HDDs that are at least the same size as your internal HDD (preferably larger capacity). In addition you will need an enclosure, preferably one with a Firewire as well as a USB connection.
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Ciao. -
After copying a movie to the harddisk of my MacBook I wanted to also copy it to my iPad, but for this you first have to copy it to the library in iTunes, but this doesn't seem to be working. So how can I get this movie to the library ? And to the iPad ?
How is it not working? And how are you doing it? Drag the movie onto the iTunes icon on the Dock... what happens?
-
Hyperion System 9.3.1 reports taking longer time for the very first time
We are on Hyperion System 9.3.1. The Financial reports are taking longer time (like 2 to 3 minuter) for the very first time for each login. The subsequest reports are does work faster.
The behaviour is same for the Production and Development environments.
All the reporting services have given enough JVM heap size.
FYI, Reporting and Workspace runngin on the same server. Workspace/Reporting are clusted in two servers. HFM app is running on different server. HFM web is on different server. Shared Services is also on running on different server.
Any help would be greately appreciated.
Thanks.The reason they run quicker the subsequent times, is because the data has already been cached in the system.
You could try the usual tricks to speed the report up:
- move items into POV
- have children and parent in the same row
- arrange dimensions in inverse outline order
- remove excessive formatting
- push report calculations back to the data source
We have found that using lots of dynamically calculated members also slows down reports, so try and limit the number of these.
Hope this helps. If not maybe give us an idea of how the report is created to see if other changes could be made. -
what do i do if my account was locked for answering the security questions wrong too many times?
Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue. -
Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh. -
I have tried to update my iPod Touch 4G to the latest update, I currently have iOS 4.1. After the 4 hours an error message appears saying iTunes had lost connection even when I am fully connected to the internet. I have repeated the update 4 times now with not luck. Any ideas?
Thanks in advance
AdamIf you get a network timed out error, try disabling the security software on the computer during the download and install.
You can also try a direct download andinstall by:
iPod, iPhone and iPad Firmware Download
Nera the top of the page aretheinstructions for selecing the download for the install. -
I am using iPhone 5 by Cricket and it is international unlock and i tried that when i entered the sim first time it gives network but when i take out the sim and entered the sim again it doesnt give network and keep searching why ?? Is this problem can be resolve
Don't know where you got that idea, all US Cricket iPhones are carrier locked, with NO way to get them officially unlocked, as Cricket DOES NOT offer official unlocking for the iPhone.
-
my song forgot his password. I reformatted as described above but when i went to restore from backup it asked me for the password again! now what?
Then you or your son has encrypted the backup in iTunes. This password is 100% whatever you or him put in when you turned on to encypt backups (its a check box in iTunes) and it has nothing to do with that code that was on the iPhone (unless by chance he decided to make it the same thing).
Anyhow, you can guess at an encryption password as many times as you like. Since it's a local encryption, there is no way to reset it. You either get it right eventually and then the restore will complete and you can turn if off in iTunes after that (using the password that worked), or the backup will never be usable without the password.
Keep trying to guess it until you give up, then just move on with setting the iPhone us as new.
Read this article. It has some stuff that may help you. http://support.apple.com/kb/TS5162 -
I have a new computer and I want to make it my home device for I tunes. I have home sharing, and all of the music and files are on the new computer. Now what do I do to make the new computer the home computer for Itunes?
The computer (windows platform) where I initially began using Itunes has four other computers/devices that are shared with it. All four of the other computers show up in my account, and can be managed. Or I can remove them. But on the new computer that I want to be my base computer (home if you will). The computer I want it to replace, when ITunes is open, has a tool bar, with various functions. All of the other devices are linked to that computer in ITunes, under Home SHaring. The new computer, shows the downloads via Home Sharing, but it does not show/have any tool bar.
I want to activate the new computer to be the computer via ITunes where all of the devices are linked to it as the base for ITunes. And, I don't know how to make that happen.
I hope that makes sense. -
I'm in the process of updating my iPhone4 to IOS6. The installation has stopped half way in the process. And it has ben like that for almost two hours. Now what do I do?
Hello scrapperdw,
Thank thank you for using Apple Support Communities.
The following article provides steps and troubleshooting when the install process has stopped.
iOS: Apple logo with progress bar after updating or restoring from backup
Regards,
Jeff D.
Maybe you are looking for
-
ID 9.2 is very slow. Other CC programs run at normal speed.
I have a document of 40 pages, most of which are blank, but operations are very slow. It may take 10 seconds for a 1500 x 750 pixel Photoshop image to appear during a Place operation after the box designating the size of the picture has been drawn wi
-
Compression for YouTube, to less than 100MB
Hello - I followed YouTube's instructions, and have been compressing from FCP, to MPEG-4. All's good - it looks great, client's happy. I now have quite a larger file, that another client would like to upload to YouTube, but it's well over 100MB, in t
-
Icloud storage purchase...
So I got 25 gigabytes (5 free and 20 for 40$) in May and now the same amount would cost $12? ..... Does the 20 Gig for 0.99 a month actually give you 25 or just 20 Gig?? If it is 25 Gig, is there any way to get the current pricing???
-
Hi Experts I have to implement a Sales Order process for my client. Overview of the process which needs to be implemented: A company sells xyz product. So the customer places an offer for abc product at some price. The request goes to the sales depar
-
Automatically creation of column by creating it in another list
Hi, I have two list (list1 and list2) and what I want is if I create any column in list1 the same will create in list2 with same description and property. Kindly help me in this. thanks, Vidhu