IPad 2, mails not being sent when using reply to all feature

Hi,
Under BYOD we have iPads being allowed in our office environment. We have Lotus Notes Traveler servers setup for email access.
We are facing an issue with one executive users iPad 2 in the mail app.
The issue is when user is on WIFI and uses a long signature in the iPad and does a "reply to all" to any mail the mail goes and stays in the outbox.
Single reply or composing a new mail works fine. If we remove long signature, then "reply to all" works fine.
This issue is only with Wi-Fi, on GPRS everything works fine with long signature or without.
The iPad is on iOs 6, we tried resetting and restoring the iPad but the issue still persists.
Would really appreciate if you all could help me solve his issue.'
Thanks

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this: Delete the account in Mail and then set it up again.
 Cheers, Tom

Similar Messages

  • How do I not include myself when using 'Reply to All'?

    I'm sure Apple Mail used to send copies of an email to everyone except myself when I hit 'reply to all', but all of a sudden I am being included on the distribution list.
    Is there a way to toggle this setting? I can't find anything applicable.
    I've looked in Mail -> Preferences... -> Composing and the box labelled 'Automatically Cc: myself' is unchecked.
    Any help would be appreciated.
    Thanks
    Mike.

    The settings for this are set per account. So you could turn it on for an account that you use for business, and off for your personal account.
    I don't know of any setting to change it per addressee, which might be one way of doing it.

  • My apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

    my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

    Must be serious because you have stated the problem 4 times now.
    Here are a number of things that you can try and maybe one of them will help.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
    You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
    And ... You can always install the updates in iTunes on your computer and then sync them to the iPad.

  • Solved Problem - mail not being sent and kept in Outbox....

    I've posted a few messages here about mail not being able to be sent and kept in the Outbox.
    It is solved. I believe.
    Everything seems to be back to normal. I guess it was a problem of me over stepping limitations for .Mac e-mail, and getting locked out for a 24 hour period. So, I will be more care next time I need to e-mail large files to numbers of people ! Probably will invest in something like Stuffit and use there compression facility to reduce the size of files I want to send over the internet and via e-mail.
    Thanks to those who took interest and gave advice.

    You don't have to invest in Stuffit.
    Built-in compression is included with the Finder.
    To compress files before sending them, use the Archive command in the Finder's File menu. Select the file or files you want to compress, then choose File > Create Archive.
    A compressed archive of the files is created. If you archive a single item, the archived file has the name of the original item with a ".zip" extension. If you archive multiple items at once, the archived file is named Archive.zip.
    Recipients can open the archive by double-clicking regardless the platform - Windows or OS X.

  • IPads not being recognized when using apple configurator software

    I have an iPad cart with 25 iPad's. I am using a MacBook Air and the apple configurator software to try to manage the iPad's. The problem is, only 21 of the 25 iPads will show up in the apple configurator "prepare" section. All of the iPads are not being recognized. When I use a MacBook Pro all 25 iPad's will show. So the problem seems to be with the MacBook Air and/or Apple Configurator. Any suggestions? We have 30 carts total with some having up to 30 iPads so I am trying to find a fix for this.  

    This seems to be an issue related to the new 2013 MacBook Air models.  I've seen it pop up a few times now, and the common factor is always a 2013 MacBook Air.
    A "solution" doesn't seem to exist yet.  The workaround at this point would be to either use any older Mac to do the syncing, or only connect and sync half of the devices at a time.

  • Notifications are not being sent when Bulk Load is done

    Hi All,
    I have OIM 11g setup on my machine. I use the bulk load utility for loading the user data. Now in my OIM setup, the notifications are being sent for all stuff like Reset Password. New account creation and other. However when I bulk load the users, notifications are not sent to their mail ids. I am running the scheduled job "Bulk load Post Process" which is necessary so that the users are synced to the LDAP repository. I have the LDAP Sync option checked and also the Notifications option set to yes in this scheduled job. Though the users are loaded successfully and are synced properly, the notifications are not sent. Can some one please guide me as to what could be the problem here?
    Thanks,
    $id

    The code is probably only called in the Event method of the event handler that sends the notification. You can check the mds files and find the notification you are looking for and then use a code decompiler to find the class that is called. You can then use this code as a sample, or write your own notification code and create an event handler that runs in the BulkEvent.
    And on another note there is also this System Configuration Variable: Recon.SEND_NOTIFICATION which is set to FALSE by default.
    -Kevin

  • Mail not being sent

    Every day this debacle gets worse, mail says its sending my mail but it isnt, sent box is empty, I sent email to myself at Yahoo address and guess what it never arrived. I sent quite a few and none got through. So I logged into me.com and checked my mail there. My mail box there was at least a month out of date. None of my test messages were showing and the messages showing I had deleted weeks ago. Good effort Apple.

    Seems to be a perennial problem with Mail. I've posted this before, but it seems it may be needed again. Start at the top and work your way through the solutions. Hope it work...
    There's been a lot of this around. I was composing a post on how to solve the problem of not sending out email, maybe to have it posted somewhere useful. It's not finished, but I'll paste it below. It's designed for the non-techie, so some of the advice is quite basic.
    The Mail application seems to have bugs and be prone to corruptions after software updates have been installed. Being unable to send messages has crept up sporadically since January 2007, and a lot of people have offered advice - but it can take hours to trawl through. This is a distillation of some of that advice...
    Some glitches can be solved by fiddling around with settings and preferences, some involve reinstalling Mail or switching to a new email software program.
    If your email provider has a webmail service, log on to that and try sending a few messages. If they fail, contact your email provider. If they do get through, the problem is probably on your Mac, so it's time to start fiddling.
    Before you do anything, close your Mail application and back up your Mail accounts and settings to a memory stick or CD.
    To back up your messages and mailboxes:
    Open a Finder window, click on the house icon which has the name of your computer or user name next to it. Then click Library, grab the folder called Mail and copy it to your memory stick.
    To back up your Mail preferences (called a 'plist'): Look in Library for the folder called Preferences. To save the preferences of all applications, drag the whole folder to your memory stick. To back up just the Mail prefs, open the folder and copy the file named com.apple.mail.plist.
    Eject your memory stick and then open the Mail program.
    Start fiddling.
    In Mail, select the menu Window, then Activity viewer. Now under the same menu, run Connection Doctor. Note down the results. Quit Mail.
    Mail could go wrong because of problems glitches in other parts of the computer's software. The reason is that Macs seem to be programmed to repair themselves in the middle of the night and some diagnostic routines only run every few days and weeks, so you can't second guess when they are going to happen. So if you save the planet by turning off rather than leave the computer in sleep mode, the computer will never self-diagnose and repair itself. Try downloading a small free/shareware program that tells the computer to diagnose and repair when you power up. It doesn't slow you down and just adds a few clicks and whirs your first few minutes of computer use. I use Anacron, for no better reason than it was the first one I came across. The download page is at http://members.cox.net/18james/anacron.html, but I'm sure there are others available.
    But to diagnose and repair immediately, go to your Utilities folder (it is in the Applications folder, or in Finder select the Go menu and click Utilities from near the bottom). Select Disc Utility. When that opens, select your hard disc in the left hand pane. Run Verify Disk Permissions. Then Repair Disk Permissions. Then Verify Disk and Repair Disk (you may have to start up using your Mac installation disk to do it). Open Mail.
    Plain text
    Try sending a message again. If it fails, delete it and compose a new message, then send it as plain text (look under the Format menu, fifth item down). Send message. If it works, you may have to reinstall Mail to get back the ability to send messages formatted as rich text.
    Server settings
    Open your Mail preferences and select the Server Settings in the Outgoing Mail Server pane. Write down the settings as you see them, or use the screen grab shortcut (use apple+tab to select Finder, then hold down apple+shift and press the number 3 to take a screen-shot, which will be saved to your desktop, then tab back to the Mail program). Then fiddle as follows...
    Ports
    Some internet service providers (ISPs) change the ports through which they will accept messages - and don't tell the users. Phone them up and ask if they've changed the server settings, and of they're blocking messages from certain ports. If no joy, try changing the port setting to one of the following, then quit and restart Mail before trying to send a message. Note, some of the ports may require you to tick the Use SSL box, some don't - so experiment. Possible ports: 25, 465, 587, 992, 995 (SSL).
    Password authentication
    Sometime passwords get corrupted, so you need to fiddle with it. Even if your ISP doen't require a password, turn on password and input the log on name and password your internet service provider gave you (possible those used for your POP settings). Mail will ask you for your password when you send a mesage. Enter the password but don't add to keychain. Do this for a while (hours, days - the option depends on success rate, not sure why) then turn off the password authentication. This removes the corrution and resets the preferences - so again save the Mail plist to memory stick (use a new location rather than over-writing the old plist).
    Certificates
    You may also get a message saying there is a certificate problem with your email connection. So solve this, open Mail's preferences and to Advanced. If the box Use SSL is checked, the por tnumber is anything other than 110, and the Authentication is set to anything other than Password, try this: Uncheck Use SSL. The port number should revert to 110 - if not, change it manually. Change Authentication to Password. Close and save preferences, quit Mail, restart Mail, send a message.
    That's as far as I've got.

  • Campaign e-mails not being sent

    Hi,
    I am having a problem sending out e-mails from a Contacts List. The campaign report shows that all e-mails have been sent eg 5 when there are 5 contacts in the list. However the e-mails are not actually delivered. Strangely when I send a one off e-mail using the Send one copy to: function the e-mail is delivered. Are these methods using different services?
    We are on SP1 Patch 1 and SAP B1 2007A patch 46
    Can anyone help?
    Regards  Martin

    We do have almost similar problem. This is on SQL 2008.
    when sending a Marketing Campaign with contact list type Emailing List, the emails in the log file
    of the campaign show as sent, but in reality no emails are received.
    We have configuted the SMTP(from Config Settings), the port is open. We used different email servers
    for a test, and none of them were able to solve the issue. All setup has been done according to
    documentation. The DSN is configured as well.
    As soon as we send the campaign, the email posts as send, the number of emails on the top of the
    Campaign Screen on the Assign tab shows one email, and on the bottom is the time and date stamp of
    sent emails. However, the Campaign REPORT shows no Sent messages and we have not received an email.
    The client is using Microsoft Exchange with an outside provider.
    Can someone helpout. We tried all the necessary steps can anyone help out on this issue.
    Thanks.
    Maddy

  • Mail not being sent for background job spool

    Hello All,
    I have created a back ground job by adding a mail id in the spool receipient list. The job has finished successfully and spool is created but the mail has not been sent I have checked SOST transaction and no mail has been sent to this mail id.
    This is only happening for some jobs other jobs are able to successfully send the spool as mails to the mail id's mentioned in spool receipient list.
    I would like to know why this is happening only for some jobs and how can I check the whether mail has been generated or not.
    Your replies will be greatly appreciated.
    Thankyou,
    Ranjan

    Hi
    To check whether mail is generated you can create dynamic break-point with SAAB transaction.
    Using this transaction you create a memory area for your jobs where you can load any data value of your report..
    Probably something goes wrong with COMMIT of Mail Function module system.
    Hope to help..

  • Outgoing emails are not being sent from my email address all of a sudden. It started happening when I changed my gmail password

    After I changed my gmail password my outgoing emails are no longer being sent from my gmail account, but are being sent from my spouse's account so that replies go into her inbox, not mine. 

    rigoran1231,
    You may have a corrupt preference, in order to correct this open Mail - Preferences - Accounts and re-input all the preferences for the account. While they may look ok one or more may be corrupt.

  • Mail not being sent by phone

    My iPhone is giving me a pop-up that says, "Cannot send mail" and says that "the sender address was invalid."
    I've sent mail without problems with my iPhone for a year now and this just began to happen.
    Whats up?
    Jeremy

    Hello all
    I've had the same problems not being able to send (and sometimes receive) mail as well. I have three email accounts set up on my phone, and I noticed that one of the accounts worked, but not the other two. That tells me that it's not a defective iPhone as I first suspected. What I found out is that on the account that works, the SMTP Server Port Setting is set to 25. On the two accounts that weren't working, the Server Port was set to 587 and that's why I couldn't send out email. After changing the settings on both non-working email accounts, everything now works perfectly.
    So, if you go to Settings>Mail, Contacts, Calendars>Accounts>Outgoing Mail Server SMTP>Primary Server>Server Port: 25
    This worked for me. Hopefully it'll work for all of you here and anyone else with this problem.
    Good Luck!
    Warmest Regards,
    Mike.

  • Email Submission Receipts Not Being Sent When Collect Payments is Enabled

    I am working on a registration form and have included the option to have an email submission receipt sent to the registrant. I tested the form and sucessfully received an email confirmation. When I enabled payments via paypal and tested the form again, I didn't receive the email submission reciept. I've tried with several different email addresses (gmail and others) and don't receive anything. I've checked spam folders and nothing is there either.

    There is a known issue with notifications for payment forms when "Include submitted data" is not selected on the Email Notifications panel.  The fix for this issue will be included in an upcoming release.  In the meantime, you can work around the issue by checking the "Include submitted data" box.
    Also, please note there is a second issue in that notifications are not sent when the user simply closes the browser window after being redirected to PayPal, instead of either completing or canceling the transaction.  There is currently no workaround for the second issue so, unfortunately, some notifications may still be dropped even if "Include submitted data" is checked.
    We apologize for the inconvenience.
    Eylon

  • E-mails NOT being sent by me!

    Two e-mails have been sent out apparently by me (but not actually by me) recently to all in my address book.  They are telling people to click on a link contained in the message (both different) links.
    Could somebody tell me how I can stop this please?  This seems to be spam in reverse!
    Regards
    Kathy

    kathypink wrote:
    Two e-mails have been sent out apparently by me (but not actually by me) recently to all in my address book.  They are telling people to click on a link contained in the message (both different) links.
    Could somebody tell me how I can stop this please?  This seems to be spam in reverse!
    Regards
    Kathy
    Hi Kathy. Welcome to the forums.
    Please can you go a alter the password for your account - my shortcuts option 3, or via option 12a takes you there.
    Whilst you are in webmail, go to Options/Mail (or More) Options and click on POP & Forwarding, to make sure that nothing has been set to forward the BTYahoo! Mail.
    It sounds like someone (a hacker) has managed to get the password to your account, hopefully you've not fallen for a phishing scam - where an email pretending to be from BT may have requested you to enter username/password.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • Database is not getting shutdown when using command "stopsap all"

    I installed ERP 2005(ECC6.0) using oracle on HP-UX with SID=ER1, The installation was successful, but I am facing two issues now.
    1. When I stop sap using command 'stopsap all' only instances is getting shutdown not the database, I have to Explicitly shutdown the database (oracle).
    rp34-109:er1adm 26> stopsap all
    Checking ER1 Database
    ABAP Database is running
    Stopping the SAP instance DVEBMGS01
    Shutdown-Log is written to /home/er1adm/stopsap_DVEBMGS01.log
    Instance on host rp34-109 stopped
    Waiting for cleanup of resources............................
    Stopping the SAP instance SCS02
    Shutdown-Log is written to /home/er1adm/stopsap_SCS02.log
    Instance on host rp34-109 stopped
    Waiting for cleanup of resources.........
    Database is still running on remote DB server
    Log on to DB server and stop database
    TRANS.LOG
    OCI-call failed with -1=OCI_ERROR                   2066  0.175292
    4 ETW000  [dev trc     ,00000]     SQL error 942: 'ORA-00942: table or view does not exist'
    4 ETW000                                                                              71  0.175363
    4 ETW000  [dbsloci.    ,00000]  *** ERROR => ORA-942 when accessing table SAPUSER
    4 ETW000                                                                             115  0.175478
    4 ETW000  [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 942          50  0.175528
    4 ETW000  [dev trc     ,00000]  Disconnecting from connection 0 ...                  205  0.175733
    4 ETW000  [dev trc     ,00000]  Rolling back transaction ...                         127  0.175860
    4 ETW000  [dev trc     ,00000]  Closing user session (con_hdl=0,svchp=0x80000001010858c0,usrhp=0x8000000101075a70)
    4 ETW000                                                                             272  0.176132
    4 ETW000  [dev trc     ,00000]  Now I'm disconnected from ORACLE                     844  0.176976
    4 ETW000  [dev trc     ,00000]  Try to connect with default password                  42  0.177018
    4 ETW000  [dev trc     ,00000]  Connecting as SAPER1/<pwd>@ER1 on connection 0 (nls_hdl 0) ... (dbsl 700 010307)
    The Second issue that I am facing is with the dbs_ora_schema= SAPSR3,
    but my SID is ER1, it should display SAPER1, can anyone help in changing this.
    I tried changing this in .dbenv_hostname.csh & sh files but changing that I even unable to start sap again

    Hi
    Pls follow the notes 400241,662644.
    If u follow above notes you get the result.
    Feel free to revert back
    Pls provide the points if u get the answer.
    ---venakt.

  • Mail not being sent for a background job scheduled.

    Hello all,
    We have a report which is scheduled in background. The job runs for every 10 mins in development server and sends the status to various mail IDs. The job runs successfully and the status shows as 'FINISHED'. But users are not able to recieve the mail.
    Mails are sent using the FM "SO_DOCUMENT_SEND_API1".
    When the debug the report everything works fine and the user recieved the mail. Any pointers to this would be of great help.
    I tried searching in SDN for existing posts but could not find any relevant thread.
    Thanks in advance.
    Regards,
    Chandra.

    Hello,
    PFB piece of code showing how the FM is called.
    CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
             EXPORTING
                  document_data       = wa_doc
                  sender_address      = wf_sender
                  sender_address_type = 'SMTP'
             TABLES
                  packing_list        =  it_paklist
                  object_header    =  it_obj_head
                  contents_bin      =  it_obj_bin
                  contents_txt      =  it_obj_txt
                  receivers          =  it_obj_rcv.
    Also , please note that this report has been scheduled some time in last year i.e. 2008 and it was running successfully by sending mails. But from past 2 months the report is not sending mails.
    Regards,
    Chandra
    Edited by: Chandra A on Sep 7, 2009 2:17 PM
    Edited by: Chandra A on Sep 7, 2009 2:17 PM

Maybe you are looking for